PROVIDING PUMPSET FOR VETERINARY HOSPITAL KANIYAMBETTA GP-PR NO17 -23-General Electrical Work

Amount

PUMPSET

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

1.14.3:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

OD275210/2022-2023:Supply and providing 50 mm stainless steel Hose Collar with Hose Clip

OD275211/2022-2023:Supply and connect a 1.5-inch HDPE pipe ISI (10kgf/cm2) to the existing pump set and as a delivery pipe with suitable connectors.

OD275226/2022-2023:Providing and fixing PVC ISI marked pipes including Fittings and jointing of pipes with one-step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.50 mm dia (1.5 inches)10 Kgf/cm2. (Depth of trench not less than 0.75mtr, width -not less than 0.3m)

OD275212/2022-2023:Supply and fixing flat iron clamps made from 50 mm flat iron clamp with suitable size bolt and nut for fixing delivery pipe on the top of the well as required.

OD275213/2022-2023:Supply and fix 1.5-inch GI flange with the required bolt, nut, washer, and gasket. etc.

OD275322/2022-2023:S & F Motor starters of the following ratings DOL starter for 1 HP motor( L&T MUG, HAVELLS URJA series) or equivalent with relay, LED indicator, Volt meter, ammeter, capacitor, etc.

OD275323/2022-2023:Supply and installation testing and commissioning of 1HP 12 Stage open well submersible motor pump set having 2850 RPM suitable for single phase 230/240V, 50 Hz, AC supply conforms to relevant ISS. Head 17 to 69m with a flow rate of 66 -13 LPM and should provide 8 LPM at a head of 18m with standard size delivery pipe connected to the motor using leakproof materials as required including giving connection as per the direction of the engineer. (Kirloskar/Texmo/Crompton or equivalent)

OD275216/2022-2023:Supply and laying of 20mm or nearest size Nylon rope

SOMAN K

Bidder Name

SOMAN K

JITHESH KUMAR K S