Loading…
Loading…
Tender Value
₹16.4 L
EMD Value
₹16,393
Closing Date
22 May 2026, 4:00 pmClosed
Executive Engineer, RWS&S Division, Penukonda
Penukonda
Providing DWF through 100% Fhtcs Achampalli Habitation of Chandakacherla GP of Madakasira Mandal in Sri Satya Sai District.
935199
Short Tender Notice No.TO/01-06/2026-27 Dt :13.05.2026
OPEN - NCB
Water Supply
SRI SATYA SAI
7 documents required · 7 mandatory
₹581
₹16,393
16 May 2026
16 May 2026
16 May 2026
Construction of pipeline for water supply with 63 mm dia 6 Kgs./cm2 HDPE pipe line confirming to as per IS : 4984/1995 with its amendments and revisions their on including supply of pipes as per requirements including earth work excavation of trench size 0.70x1.00 Mts. in all soils upto SDR soils using 2/3 machinery and 1/3 manual labour, lowering, laying and jointing of pipes and providing sand cushion 150mm thick true to alignment and gradient and refilling the trenches with excavated soils with watering ramming and removing surplus earth from site of work and filling pipeline with water and testing with required pressure for every 500 Mts etc., complete But Excluding GST and CED and including Overheads and includung CP 13.615 %.
Construction of pipeline for water supply with 75 mm dia 6 Kgs./cm2 HDPE pipe line confirming to as per IS : 4984/1995 with its amendments and revisions their on including supply of pipes as per requirements including earth work excavation of trench size 0.70x1.00 Mts. in all soils upto SDR soils using 2/3 machinery and 1/3 manual labour, lowering, laying and jointing of pipes and providing sand cushion 150mm thick true to alignment and gradient and refilling the trenches with excavated soils with watering ramming and removing surplus earth from site of work and filling pipeline with water and testing with required pressure for every 500 Mts etc., complete But Excluding GST and CED and including Overheads and includung CP 13.615 %.
Construction of pipeline for water supply with 90 mm dia 6 Kgs./cm2 HDPE pipe line confirming to as per IS : 4984/1995 with its amendments and revisions their on including supply of pipes as per requirements including earth work excavation of trench size 0.70x1.00 Mts. in all soils upto SDR soils using 2/3 machinery and 1/3 manual labour, lowering, laying and jointing of pipes and providing sand cushion 150mm thick true to alignment and gradient and refilling the trenches with excavated soils with watering ramming and removing surplus earth from site of work and filling pipeline with water and testing with required pressure for every 500 Mts etc., complete But Excluding GST and CED and including Overheads and includung CP 13.615 %.
Supply and Delivery of 63 mm dia HDPE 6 kg Cm2 Pipe Including cost and conveyance of all materials and labour charges etc,. Complete.
Supply and Delivery of 75 mm dia HDPE 6 kg Cm2 Pipe Including cost and conveyance of all materials and labour charges etc,. Complete.
Supply and Delivery of 75 mm dia HDPE 6 kg Cm2 Pipe Including cost and conveyance of all materials and labour charges etc,. Complete.
Supply and Transportation of 7.50 HP/12-16 stages, 3 phase 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I. including transportation, but excluding and installation charges and excluding GST
Fabrication , transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets Upto 7.50 HP (1) Voltmeter ; 0-500 V 96x96mm size - 1No Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (2) 0 to 20 Amps / 0- 50 Amps Ammeter (96x96mm size) - 1No. L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (3) Single phase preventor of suitable range - 1No.Makes: L&T / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells. (4) 32 A TP, 10KA MCB. - 1No (5) Indication lamps (R-Y-B) with switch control - 1set (6) Voltmeter & Ammeter selector switch - 2 Nos of Supply and fixing of ISI Mark suitable capacitor and excluding GST
Supply and fixing of 50mm dia Nominal Bore GI Pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI Fittings including cost and conveyance of all materials and labour charges etc complete
Supply of 3.0 core 4.00 Sqmm flat copper cable as per IS 694-1990 for submersible motors including cost and conveyance of all materials and labour charges etc complete excluding GST
Supply and fixing of MS Clamp Sets (2 Nos) suitable for 50mm dia Pipe with 8Nos bolts and nuts including cost and conveyance of all materials and labour charges etc complete and excluding GST
Supply and fixing of 50 mm dia CI Flange sets including cost and conveyance of all materials and labour charges etc complete and excluding GST
Supply and fixing of 50 mm dia CI Non return Volve including cost and conveyance of all materials and labour charges etc complete and excluding GST
Supply and fixing of 50 mm diaG.I. Bend including cost and conveyance of all materials and labour charges etc complete and excluding GST
Construction of Function Hold Tap Connections (FHTC) on 75mm dia HDPE Pipeline with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
~$Achampalli.xlsx
TENDER_DOCUMENT • 0.00 MB
Achampalli.xlsx
TENDER_DOCUMENT • 0.02 MB
BOQ.xlsx
TENDER_DOCUMENT • 0.01 MB
Declaration.pdf
TENDER_DOCUMENT • 0.48 MB
Part -A Volume -I.doc
TENDER_DOCUMENT • 0.30 MB
Tender notice.pdf
TENDER_DOCUMENT • 0.46 MB
Vol-Part-B.doc
TENDER_DOCUMENT • 0.20 MB
Download all tender documents and submit your bid