Construction of Anganwari centres in Sopore mining effected areas

Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work..

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete, including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level uoto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

12mm Cement plaster of mix in 1 : 4 ( 1 cement : 4 coarse sand) including all carriages.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20mm nominal size stone aggregate, including all carriages.

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Silver wood including all carriages

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Kiln seasoned & chemically treated hollock wood.35 mm thick incld all carriages complete.

Providing and fixing of 3 mm thick float glass pans (weight nor less than 10 kg/sqm) including cost of nails etc and all carriages complete

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked incld all carriages complete.

Providing and fixing of Aluminum Hardware fittings of Approve Brand and Manfacture incld all costs and carriage complete.Aldrop with lock.

Providing and fixing of Aluminum Hardware fittings of Approve Brand and Manfacture incld all costs and carriage complete.Tower Bolt 150 mmx 10 mm

Providing and fixing of Aluminum Hardware fittings of Approve Brand and Manfacture incld all costs and carriage complete.Tower Bolt 100 mmx 10 mm

Providing and fixing of Aluminum Hardware fittings of Approve Brand and Manfacture incld all costs and carriage complete.Handles 125 mm

Providing and fixing of Aluminum Hardware fittings of Approve Brand and Manfacture incld all costs and carriage complete.Handles 100 mm

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 incld carriage.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 incld all carriages.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages.

Dry random rubble masonry with hard stone in foundation and plinth Nallah Without bond stone incld all carriages complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests incld all carriage complete.

Providing and fixing PVC soil, waste and vent pipes incld PVC fittings all complete such as Door,Bend,Colar,Clip,plan bend etc (Prince/Phinolex or Equivalent ) with cutting and making good the walls etcs. .cost and carriage complete.100 mm dia .

Providing and fixing PVC soil, waste and vent pipes incld PVC fittings all complete such as Door,Bend,Colar,Clip,plan bend etc (Prince/Phinolex or Equivalent ) with cutting and making good the walls etcs. .cost and carriage complete.75 mm dia .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incld all carriages complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing.PN-16 pipe , 25mm OD(SDR-7.4) incld carriage.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing.PN-16 pipe , 40mm OD(SDR-7.4) incld all carriages compete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-10 pipe , 50mm OD(SDR-11) incld all carriages compete.

Providing and fixing of following PVC Pipes/Fittings of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete. 75 mm dia floor trap incld all carriages complete.

Providing and fixing of 100 mm dia Vent Pipe Type B with cowel inclf fittings complete with all carriages.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms incld all carriages complete.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 incld all carriages complete.

Providing and fixing of 12 mm thick Plywood /Borads in ceiling /partitions of walls incld cost of nails and all other fixtures with carriage complete.

Providing and fixing of Wooden Joists in framed work of false ceiling incld cost of nails with carriage complete Job.Budloo/Fir Wood incld all carriages.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick incld all carriages complete.

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade incld all carriages complete.

Lighting Point:Wiring for light point with (P+N) 2X1.5 sq.mm FRLS-H PVC insulated copper conductor single core cable in surface / recessed Conduits , with 6Amp .modular switch, modular plate, cover in front and suitable GI box (Excld. G.I Box laid earlier )etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. excluding cost of Conduits(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage.

Fan Piont:Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells/Polycab/ LUKER USA incld carriage.

Heating Point:Wiring for Power Plug with 2.5 Sqm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable and 4 sq.mm FRLS PVC Insulated copper conductor single core cable of approved quality and ISI marked as required. With . 1NO. 16Amp one way switch, 2 mm thick PVC Conduit /Channel with Bends,Junction Boxes,10 Amp S pole MCB,2 way DB MCB and Modular (wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) complete incld carriage.The material used should be of Havells or Anchor Brand.