SPECIAL REPAIRS TO BLDG No HT 02 AT 2 CORPS PROVOST UNIT UNDER GE SOUTH AMBALA CANTT

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250mtr but n exc 500 mtr complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exc 250mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for brickwork, with subclass 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as above Item No 3.00 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 1.00 hereinbefore shall be reused after cleaning the bricks. The rate quoted shall include for cleaning the bricks also.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290.Gde-E-165 complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in fixing of hold fast, coping, benching, bed blocks and the like including necessary form work and weathering, slightly rounded or chamfered angles and throating and finishing exposed surfaces of concrete fair and even complete all as specified and as directed.

Supplying and Fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing of 2nd class HW, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, elc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing of mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way traps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.

Supply and fixing of aluminium anodised, 200mm long, barrel tower bolts of extruded section, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 100mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of mild steel, helical door spring 200mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and as directed.

Supply and fixing of aluminium extruded alloy handle, 150 mm long, fabricated type, anodized, ISI Marked complete, all as specified and as directed.

Supply and fixing of second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty' labours; articles not exceeding 200 cu.cm each complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Taking down old wooden roof trusses complete of clear span exc 6 metres & n exc 9 metres and stacking of serviceable material and removal of debries from site, complete all as specified and directed.

Taking down old steel roof trusses complete of clear span exc 6 metres & n exc 9 metres and stacking of serviceable material and removal of debries from site, complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in framed work, in any position and removal from site complete all as specified and directed.

Dismantling timber in any position of unframed work such as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section and removal from site complete all as specified and directed.

Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, AZ-150 conforming to IS-15961, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of old sheets of any descriptions as existing on site complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based Plain steel sheet, 0.50mm thick, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of old sheets as existing on site complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Material and labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

Material and labour for mild steel screw bolts (machine made) dia of neck exceeding 11 but not exceeding 15mm,with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5cm but not exceeding 10cm long complete all as specified and directed.

Material and labour for rolled mild steel plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, with rivetted, bolted or welded attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface including taking down of old floor tiles with bedding as existing at site and removal thereof, complete all as specified and directed.

Material and labour for premium quality, glazed coloured ceramic tiles of size 300mm x450mm x 7mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:3), set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface including taking down of old floor tiles with bedding as existing at site and removal thereof, complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), 50mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed

Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Material and labour for rendering, internal,15 mm thick on surfaces any description of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for rendering, 15 mm thick, in cement mortar 1:4, mixed with water proofing compound @ 2% by weight of cement or as per manufacturer’s instructions, on surfaces any description of brick work or concrete surfaces of any description finished even and smooth without using extra cement complete all as specified and as directed. Note: Supply only integral water proofing shall be measured and paid separately.

Material and labour for rough cast plastering over and including 15mm thick rendering in CM 1:4 complete all as specified in Clause14.22 of MES Schedule Part-I and as directed. Note: 1. Rough cast finish shall be provided as under:- After applying under coat of CM 1:3 and while it is still in plactic state the rough cast mixture consisting of crushed stone or fine aggregate (which is generally of size between 4 to 8 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. 2. Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, complete all as specified and as directed.

Material and labour for preparing surfaces of wood and wood based materials, steel and iron work/new or old, of any description and girth, not otherwise described, and treating ends of posts, backs of chowkats, etc., with tar or coal lar, black paint, area tarred not exceeding 0.1 sq. m each complete all as specified and as directed.

Supply and fix GI Metal Suspended Ceiling System at all heights of Perforated with Fleece 600x600x0.5mm TEGULAR EDGE TILES in global white Powder Coated with 60-70 Micron front coating laid on 24mm wide Tee grid – strong section flanges colour white having stitching on the Main Runner, 600 mm and 600 mm Cross Tees with web height of 26mm. The tiles should have Humidity Resistance (RH) of 100%, with Light Reflection of 62%. The main runner spaced at 600 mm max (centre to centre) securely fixed to the structural soffit . Hangers (GI wire of 4 mm dia) to be fixed by approved roof plug, level adjusters and screws etc at 600x600 intervals.The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 600mm long cross tees to be interlocked between main runners to form 600 x 600 mm with grid module(24X38X0.3mm).Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 600 mm cross tees. Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), including PVC clips to hod the ceiling tile including tyaking down of old ceiling of any descriptions as existing and removal from site complete, all as specified and as directed.

Supply and fixing cement concrete heavy duty tiles (coloured), good grip series, size 300mm x 300mm x 10mm thick pattern as approved by Engineer-in-Charge, set jointed and pointed in neat cement slurry, laid over and including 20mm thick screed bed in cement mortar (1:4), complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates), as in sub base of floors, finished rough and even to receive floor topping complete all as specified and as directed.

Supply and fixing in repairs of MS powder coated conduit 1.6mm thick decorative curtain rod, 25mm dia, and fixing with decorative brackets 2 Nos for each cut length, stop rollers and finials at the end for each length complete all as specified and directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25mm dia with accessories, concealed on wall/ ceiling and including 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with and including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal confirming to IS-5139 (Pt-I) of 1969 and IS: 14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including new 3mm thick plastic laminated sheet top cover extended up to 25mm over sunken box all around for housing the switches, socket outlet, fan regulator etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/ fan point controlled by one switch complete all as specified and directed. Notes :- (i) Switch, socket, lamp holder, ceiling rose and fan regulators to be measured and paid for separately. (ii) PVC Conduit shall conform to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only.(iv) The concealed conduits and MS boxes shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No. 49.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per Srl item No.49.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per serial item No. 49.00 above, but for one socket point 15 and 5 Amps (independent), with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch piano, 5 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked complete all as specified and directed.

Supply and fixing of switch piano, 15 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked complete all as specified and directed.

Supply and fixing of socket outlet, 3 pin, single pole, 5 amps, 230 volts, flush type, ISI Marked complete all as specified and directed.

Supply and fixing of socket outlet, 2/3 pin, single pole, 15 amps, 230 volts, flush type, ISI Marked complete all as specified and directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing of electronic rotary stepped type fan regulator, 120 watt, 50 Hz, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.

Supply and fixing of lamp holder, insulated body, PVC/Polycarbonate type with back plate for batten fittings complete all as specified and as directed.

Supply and fixing in replacement channel for fixing of LED tube rod, made of aluminium housing body in CRCA sheet, suitable for 18/20 watt LED tube light, high efficient, AC, 220-240 Volts, 50 Hz, with built in electronic drivers having THD < 10%, connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting including disconnecting and taking down existing light fitting and removal complete all as specified and directed.

Supply and fixing in replacement T-8 LED tube rod 1x18/20 watts, AC, 220-240 Volts, 50 Hz, high efficient T8 with aluminium extrusion heat sink for optimum performance with high lumen efficiency including taking down of old tube rod complete all as specified and directed.

Supply and fixing in replacement of recess/ surface mounted LED flat panel 2' x 2' decorative light fitting with high LEDs and glare free prismatic diffuser, energy efficient provided with including LED 36 watt connected with 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting complete including disconnecting and taking down existing light fitting and removal complete all as specified and as directed.

Supply and fixing in replacement of decorative surface mounted LED mirror light, high efficient diffuser, aluminium housing in CRCA body suitable and icluding 10 watt LED tube light, AC, 220-240 Volts, 50 Hz, connected with 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting complete including disconnecting and taking down existing light fitting and removal complete all as specified and as directed.

Supplying and fixing in replacement, 10 watt LED bulk head light fitting with10 watt LED lamp and holder complying IP66 ingress protection and inpact resistance of IK09 long life, 50000 burning hours, including connecting up using three core, twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light and disconnecting and taking down of existing light fitting and removal complete all as specified and directed .

Supply and fixing in replacement of LED security light luminaire 30 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.

Supply and fixing sheet metal enclousers vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts with 250 Amps rated bus bar IP-42 protection, with shoulded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole, 160 Amps, 25 KA as incomer and MCBs as out going complete with making suitable size of MS cabinet 2mm thick dully grouted on the wall (flush) with opening arrangement including taking down the existing DB, MCCB and MCBs any type making connections with suitable size of lugs and making good the disturbed surface matching with existing surface including disconnecting and taking down of old DB as existing and removal from site complete all as specified and as directed.

Supply, installation, commissioning and testing of SPN distibution board, 8 way, double door, IP 43, conforming to IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles including disconnecting and taking down of old DB as existing and removal from site complete all as specified and as directed.

Supply and fixing in replacement MCB, single pole, 240 volts, 6 to 32 Amps capacity, 10kA rupturing capacity, C Curve fixed in DBs, ISI marked complete all as specified and as directed.

Supply and fixing in replacement MCB, single pole and neutral link, 240 volts, 40 to 63 Amps capacity, 10kA rupturing capacity, B Curve fixed in DBs, ISI marked complete all as specified and as directed.

Supply and fixing in replacement MCB, TP, 240 volts, 40 to 63 Amps capacity, 10kA rupturing capacity, B Curve fixed in DBs, ISI marked complete all as specified and as directed.

Supply and fixing in replacement of retrofit LED lamp/Bulb of 12 watt B-22 base complete all as specified and directed.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including cutting chasing and making good, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of 6.0 sqmm cable and one run of concealed conduct shall be measured as one unit.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

Supply and laying in replacement of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 4 core, 16 Sqmm and laying in trenches including connections and disconnecting and taking down of old unserviceable existing cable and removal complete all as specified and as directed.

Supply and fixing of light grade, GI tubing, of size 40mm dia, for cable protection and fixed with clamps to pole and wall with nuts and bolts or laid in floor including taking down of old pipe complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.

Supply and lay bricks, common burnt clay, sub class "B', old size, laid in vertical direction to cable as cable protection complete all as specified and as directed.

Note:- Amount of credit of Rs. 86,725.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Ashwani Kumar

M/S JAISANT CONSTRUCTION CO.

Sham Sunder Bansal

SM ENGINEERS

S S Engineers & Contractor

Swami Enterprises

PARVEEN KUMAR

Karishan Kumar goel