General Funds

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 от Equivalent as per 151865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS-1538 excluding all taxes, duties and transportation. (PN 1.6 MPA) (BASIC RATEV.P No: 100 of S.O.R 2025-26 Vide SL.No:30 of Public health Items part-IV) 300mm Dia outlet valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, 15:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS-1538 excluding all taxes, duties and transportation. (PN 1.6 MPA) (BASIC RATEV.P No: 100 of S.O.R 2025-26 Vide SI.No:30 of Public health Items part-IV)250m Dia outlet valve

Lowering, keeping in position and fixing D.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces - 1 No. (PHE-CISV-15) (BASIC RATE V.P No: 8 of S.O.R 2025-26 Vide SL.No:14 of Public health Items part-IV)

Lowering, keeping in position and fixing D.1. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces-1 No. (PHE-CISV-15) (BASIC RATE V.P No: 8 of S.O.R 2025-26 Vide SL.No:14 of Public health Items part-IV)

Supply and delivery of Bolts and Nuts with double washers including conveyance etc complete but excluding taxes (1/2" to 1") (Basic Rate V.P.No.107 of SOR 2025-26 Vide Sl.NO.33 (5) of Public Item part-IV) MAT-08262

Engaging Of Mas Mandoor for cleaning of Valve pits and Removal of damaged cer? EL5Rs et complets. UN-SKILLED (BASIC RATE VP N SOR 2825-26 Vide SLN (135) of Part 1-Labour Rates)