REPAIRS TO SECURITY LIGHT/PERIMETER LIGHT/HIGH MAST LIGHT AND GARDEN LIGHT AT SAA UNDER GE (S) TEZPUR

Amount

Excavation of trenches in soft/loose soil n.exc 1.5 metre wide and n.exc 1.5 metre depth and getting out complete all as specified and directed.

Returning filling in approved earth, including spreading leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed

Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50metre above the starting point complete all as specified and directed.

Taking out old U/S underground LT cable of any size, any position from trenches, floors and walls, all as specified and directed.

Supply, fixing ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade with fixing acessories of 10 Sqmm, 2 Core all as specified and directed. Make: RR Cable/Plaza/Finolex/Havells/KEI

All as per item No. 5 above but for size of cable 10 sqmm, 4 core

All as per item No. 5 above but for size of cable 16 sqmm, 4 core

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed.

Supply & laying in trenches GI pipe 50 mm bore light grade for protection of U/G cable complete all as specified and as directed. Make: TATA/Jindal/Bansal

Supply & Laying Sub-Class old size B Bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and directed.

Taking down carefully existing unserviceable LED / HPSV/ MH Street light fitting of any watt from existing location to carry out the necessary Repair like replacement of ballast, bipin holder, tubes etc and fixed to existing GI pipe bracket on pole including necessary electric connections complete all as specified and directed.

S&F of energy saving and environment friendly long life 90 W or next higher available rating, CT>=5700 K, LED street light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, built-in- surge suppressor / SPD of 10 KV or more and high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor >=0.90, operating range – 140 to 270 V, 50 Hz complete including suitable necessary MS clamps, nuts, bolts etc. complete all as specified and as directed.Make :- Havells Cat Part : ENDURASUNBEAMSL90WLED757SASYTOPC or equivalent make as given in the list of make

All as per item No. 12 above but of 60 W capacity LED Street light. Make :- Havells Cat Part : ENDURASUNBEAMSL60WLED757SASYTOPC or equivalent make as given in the list of make

All as per item No. 12 above but of 45 W capacity LED Street light.Make :- Havells Cat Part : ENDURASUNBEAMSL45WLED757SASYTOPC or equivalent make as given in the list of make

All as per item No. 12 above but of 25 W capacity LED Street light.Make :- Havells Cat Part : ENDURASUNBEAMSL25WLED757SASYTOPC or equivalent make as given in the list of make

Supply, fixing energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source connecting and testing LED Flood lights of 200 watts capacity and unique peanut lens to ensure uniform distribution, complete all as specified and directed by the Engr-in-charge. Make :- Havells Cat Part : JETAADORNFL200WLED757PR1SYMTOTG or equivalent make as given in the list of make

All as per item No. 16 above but of 120 W capacity LED Flood light. Make :- Havells Cat Part : JETAADORNFL120WLED757PR1SYMTOTG or equivalent make as given in the list of make

All as per item No. 16 above but of 70 W capacity LED Flood light.Make :- Havells Cat Part : JETAADORNFL70WLED757PR1SYMTOTG or equivalent make as given in the list of make

All as per item No. 16 above but of 50 W capacity LED Flood light. Make :- Havells Cat Part : JETAADORNFL50WLED757PR1SYMTOTGor equivalent make as given in the list of make

S & F in replacement 8W LED outdoor new generation landscape lighting fitting Bamboo type with 1mtr length IP 65/66 protection including base to stand alone complete all as specified and directed.Make :- Havells Cat Part : BAMBOOBLS8WLED830PSYMTOPC or equivalent make as given in the list of make

S & F in replacement 8W LED outdoor new generation landscape lighting fitting Cone type with IP 65 protection including base to stand alone complete all as specified and directed.Make :- Havells Cat Part : CONEBLS8WLED830PSYMTOPC or equivalent make as given in the list of make

S & F in replacement 45 W LED outdoor New generation, Circular LED post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminaries with high power LEDs as light source with IP 65/66 , IK-07 protection complete all as specified and directed. Make-Havells, Cat No-RINKPT45WLED757PSYMTOPC or equivalent make as given in the list of make

S & F in replacement 25 W LED outdoor New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminaries with high power LEDs as light source with IP 65/66 , IK-07 protection complete all as specified and directed. Make :- Havells Cat Part : RUBYPT25WLED830SSYMTOPCor equivalent make as given in the list of make

All as in Item No- 24, but for 45 to 60 watt, complete all as specified and directed.

Taking down carefully old unserviceable street light bracket with clamps of size 25/40/50mm from street tubular pole (light fitting) complete all as specified and as directed.

S&F street light bracket made out of GI tubing medium grade 1.50 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 50 mm x 6mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete of size 32 mm. Make: Tata/Bansal/Jindal

All items as per Ser No 27 above but 25 mm

Cutting and trimming of tree branches, bushes n.exc 5 Mtr girth all along LT overhead lines/guard wire and removing branches out of defence land complete all as directed by Engr-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron earth lead wire 4.00 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel, GI earth wire protected by 15mm bore light grade GI pipe and other end connected to earthing test point or main switch board as directed including funnel with watering pipe of 20mm bore light grade GI, wire mesh, charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode PCC (1:3:6) type C-1 earth pit, cast iron cover and frame, including necessary excavation and earth work and necessary testing complete all as specified and directed and shown on electrical plate No 3 of MES Schedule Part I

Material and labour for preparation of old rusted steel surface of LT steel tubular swaged pole/ PCC (of any length upto 9 mtr) and applying one coat of black synthetic enamel paint upto 1.2 mtr height as per the existing pattern above the PCC coping and one coat of aluminium paint beyond 1.2 mtr height (for the rest portion) including cross arms brackets and re-writing pole numbers and and cutting vegetation growth all around and on height poles upto 1 mtr on the pole upto 1 mtr radius complete including replacement of self adhesive fluorescent colour tape as per existing pattern and size all as specified and directed

Supply and fix in replacement 3 core 1.5 sqmm multistranded PVC insulated flexible copper cable FRLS grade including required PVC Conduit to protect the cable all as specified and directed.

S&F MCB Single pole and neutral 'C' curve 240 Volt 20 to 40 Amp capacity complete all as specified and directed.

S&F MCB Single pole 240 Volt 6 to 32 Amp capacity complete all as specified and directed.

S&F MCB TPN 415 Volt 6 to 32 Amp capacity complete all as specified and directed.

Supply and fixing of street light thermoplastic cable junction box of size 200 x 160 x 98 mm IP 66, weather proof for outdoor installation with TPN terminal and MCB SP 6-20 A. Make - Hensel / Syntex

M & L for lowering of high mast carriage carefully from 20 mtr high structure for repairing light luminaries and raising latern carriage after repairing the light luminarises and adjust to its proper postion serving to winch mechanism pulleys steel wire ropes end terminal of SWR and greasing drain gearbox oil and toping up complete all as specified and directed. Note : Defective parts shall be measured and paid supply only under respective items of sch 'A'.

Detecting the fault of line system of high Mast by providing skilled tradesman and helper with necessary safty tools and rectify the defects on top priority basis including testing complete all as specified and directed.

S&F in repair analog timer switch , surface mounting as per sample for automatic operation of street light complete all as specified and directed.

S&F contactor modular type with ON/OFF indicator and label holder 3 pole 230 V 40-63 Amps coil operating voltage 230 volt as per sample complete all as specified and directed.

S&F contactor modular type with ON/OFF indicator and label holder 4 pole 230 V 40-63 Amps coil operating voltage 230 volt complete all as specified and directed.

Supply and fixing in replacement of Automatic street light control switch Panel complete with, complete all as specified and directed. a) Infrared sensor based Nature Switch for automatic switching of street lights (Asto. Nature switch operation should be based on Natural light Lux level. Required luminance level for switching ON is less or equal to 30 Lux and for switching OFF 10 Lux. The sensor should also have part night operation facility of minimum 4 hrs to maximum 12 hrs. - 01 No. Make Of Sensor: L&T/SIEMENS/ HPL/Bajaj/ABB b) Power contactor two pole, 230 volts, 63 Amp capacity, confirming to IEC-60947-4-1. - 01 No. Make:- L&T/Schneider/ABB/Bajaj c) The sensor along with suitable power contactor and incoming outgoing MCBs should be enclosed in a pole/ wall mountable rust proof, electric shock proof, termite proof and FR grade Thermoplastic polycarbonate enclosure (with hinged lid) confirming to IP66 protection class 2 of suitable size to accommodate all panel accessories. -01 Job. d) MCB SP 63 Amp, C Curve, Confirming to IEC-60898/IS8828. -02 Nos. Make: Hager/Schneider/L&T/ABB e) All control cable wiring inside the panel should be of copper conductor, multistandard, PVC insulated, FRLS, 1100 volts grade, of size 10 sq mm, single core, followed by colour coding and lugs/thimbles. Make: Finolex/Polycab/Plaza. (All ISI marked) f) All equipments are mounted on suitable size insulators. Make Of Panel as per Manufactures list

M/S N S CONSTRUCTION

Chinmay Traders

D G Corporation

M.P.SUPPLY

M/S Manjit Singh

AVASANA SOLUTIONS PRIVATE LIMITED