RENOVATION IN UTTARAKHAND BOARD OF TECHNICAL EDUCATION, ROORKEE, DISTT. HARIDWAR (ADMIN. BUILDING-PHASE-II)

Amount

CIVIL WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and application of white cement based polymer with tensile strenght of 1.15N/mm2, flexural strenght of 3.25 N/mm2, compressive strenght of 12.80 N/mm2, over unplastered surface, or as approved by engineer incharge. Make- Dampshield (Asian Paints), complete as per directions of Engineer-in-charge. removal and scrapping of paint, plaster and other layers to be paid in extra.

Providing and application of fibre reinforced elastomeric liquid with water resistance of 10, alkali resistance of 8, tensile strenght of 2.82, elongation 220, over plastered surface, whereever required, or as approved by engineer incharge. Make- Damp Proof (Asian Paints), complete as per directions of Engineer-in-charge. removal and scrapping of paint, plaster and other layers to be paid in extra.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. sqm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge. Internal Work- Exposed on wall

Dismantling Urinal of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling wash basin of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

SITC of PVC Wall Panelling on ceiling by fixing R-Strip uPVC section of size 35 mm x 10 mm & 1 mm on MS EWR tubular frame of 40mm x 20mm. distance between two R-Strips should not exceed 600 mm. uPVC Hollow Multi Chambered section Polypan of Size 200 mm x 10 mm. & 1 mm, 0.2 mm average wall thickness will be fixed to the R-Strip, cutting for lights and fan all complete as per directions of Engineer-in-charge.

Dismantling brick tile on elevation of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge., scaffolding for all levels to be provided as extra

Dismantling Aluminium Composite Panelling (ACP) in elevation with framework of MS/Aluminum including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge., scaffolding for all levels to be provided as extra

Dismantling multiwall polycarbonate sheet without framework m including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge., scaffolding for all levels to be provided as extra

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying Water Proofing treatment for roof slab in seven layer as given below. (a) Chipping & Cleaning the Surface & Disposal of Scrabed Malba/ Material from Site.(b) Filling the cracks with sika polysulphide. (c) Laying sika micro concrete and sika monotop on roof surface to making even & smooth surface. (d) Laying & pasing of fiber mess 45 GSM with sika SBR, water, cement: SBR: water: Cement: (1:1:2 :) (e) Applying additional 1 coat of sika SBR, Water, Cement, Paste In SBR: WATER: CEMENT: (1:1:2) for bonding of fiber mess. (f) Applying 1 Primer coat of SBR With Water In SBR: WATER (1:1) (g) Applying finning 2 coat of Sikalastic 590 etc. complete

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). each

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. : Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc

Providing & fixing of 10mm thick multiwall polycarbonate sheet 10mm thick as per design and shape approved by engineer incharge. Make- GE or Lexan Sabic

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Gutter

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumenwashers complete : Flashings/ Aprons. (Upto 600 mm)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. Of quality and make as approved by Engineer - in - charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing C.P. brass bottle trap for wash basin including CP waste fittings complete 32 mm dia complete in all respect of approved quality.(Jaquar)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

Providing and fixing soil , waste and vent pipes: Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100 mm dia

Providing and fixing soil , waste and vent pipes: Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 75 mm dia

Providind and fixing M.S.holder bat clamps of approved design to sand cast iron/cast iron (squn) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1cement :2coarse sand :4graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc: for 100 mm dia pipe

Providind and fixing M.S.holder bat clamps of approved design to sand cast iron/cast iron (squn) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1cement :2coarse sand :4graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc: for 75 mm dia pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100 mm diameter pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 75 mm diameter pipe

Providing and fixing 100 mm sand cast iron S&S plain bend of required degree. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100 mm diameter pipe

Providing and fixing 100 mm sand cast iron S&S plain bend of required degree. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 75 mm diameter pipe

Providing and fixing double equal plain junction of required degree. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100x100x100x100 mm

Providing and fixing single equal plain junction of required degree : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100x100x100 mm

Providing and fixing single equal plain junction of required degree : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 75x75x75 mm

Providing and fixing single unequal plain invert branch of required degree : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100x100x75 mm

Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 65 mm offsets With 100 mm dia pipe

Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 65 mm offsets With 75 mm dia pipe

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989

Providing and fixing terminal guard 100 mm Sand cast iron S&S as per IS - 1729

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 32mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.. External work 50 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 32 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm dia nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Carriage of material by Mechanical Transport including loading,unloading and stacking of lead 15 Km.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and shuttering including strutting,ropping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centring and shuttering including strutting,ropping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centring and shuttering including strutting,ropping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. sqm

15 mm cement plaster on the rough side of wall of mix : 1:6 (1 cement: 6 fine sand)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):From brick work in cement mortar

FURNITURE WORK PREMIUM OFFICE DSK WITH SIDE UNIT SIZE :- 2000(L)*1000(W)*750(H)MM & SIDE UNIT -1800(L)*450(W)*750(H)mm Providing The executive table provided and supplied has a main table size of 2000mm x 1000mm x 750mm. The table top is crafted from wood veneer finish on a 36mm thick MDF (Medium-Density Fiberboard) board, providing a sophisticated appearance. The gable end, made of 18mm thick MDF board, features a two-tone design that's meticulously polished with a melamine finish. Additionally, the table top includes a cable manager to ensure a tidy workspace. The base of the table comprises an pedestal with wooden leg support, enhancing stability and aesthetics. The executive table comes equipped with functional elements: on one side, a 3-drawer pedestal provides convenient storage, while on the other side, an ERU (Extended Reach Utility) storage unit offers open box storage and a fixed drawer pedestal configuration of regular drawers and a file drawer. The front tie, matching the wood veneer finish, further enhances the table's visual appeal. The entire table, including all components, is uniformly polished with a melamine finish, ensuring durability and an elegant look. The side unit accompanying the executive table measures 1800mm x 450mm x 750mm. It shares the same wood veneer finish on a 18mm thick MDF board and a modesty in 18mm thick MDF board, harmonizing with the executive table's design. The side unit features ample open box storage and a fixed drawer pedestal configuration identical to the ERU storage unit, providing convenient storage solutions. (Make- Godrej / Geeken / Delite Hi-Tech)

REMIUM OFFFICE STORAGE -IN VENEER SIZE :-1800(L)*450(W)*750(H)mm Providing and supplying office storage unit is crafted with a wood veneer finish on an 18mm thick MDF (Medium-Density Fiberboard) board, ensuring both durability and an elegant appearance. This storage unit is intelligently segmented into three sections for efficient organization. The first and last sections are equipped with glass shutters framed by aluminum profiles, offering a sleek and transparent view of the contents. Each of these sections includes a shelf inside, providing additional storage capacity and aiding in item arrangement. The middle section is designed as an open box configuration, further divided into four equal sections. This layout facilitates easy sorting and access to stored items, ensuring convenient organization within the storage unit. The combination of glass-shuttered compartments and open box sections allows for a blend of visibility and discreet storage, catering to various office storage needs. (Make- Godrej / Geeken / Delite Hi-Tech)

HIGH BACK CHAIR Providing and supplying High Back Chair crafted with a Metallic PP (Polypropylene) build, ensuring durability and a sleek modern appearance. The chair boasts comfortable Cushion Arms crafted from the same metallic material, providing a soft yet sturdy resting surface. Its Torsion Bar mechanism enables flexible movement and dynamic adjustments, allowing for personalized recline angles. The Gas Lift feature ensures effortless height adjustments, catering to diverse desk or workstation requirements. With a Metallic Chrome Base, the chair promises stability and robustness while imparting a contemporary aesthetic. (Make- Godrej / Geeken / Delite Hi-Tech)

MID BACK CHAIR Providing and supplying Mid Back Chair supplied offers comfort and functionality with its Tilting Mechanism, designed to provide users with adaptable seating angles for personalized comfort. Featuring PP (Polypropylene) Arms, this chair ensures a comfortable resting place for the arms during extended periods of use. The Metal Inserted PP Base adds durability and stability to the chair's structure, enhancing its longevity. Equipped with a Gas Lift, this chair allows effortless height adjustments to suit various desk or workstation setups. The chair's upholstery boasts a Leatherite Tapestry, adding a touch of sophistication and ease of maintenance to its design. (Make- Godrej / Geeken / Delite Hi-Tech)

RECEPTION DESK SIZE 2410(L)*1065(W)*1035(H)mm Providing and supplying The reception table being provided and supplied features a half-round shaped top made of 18mm thick PLPB (prelaminated particle board). This table is designed with two different height options, one at 750mm and another at 1065mm, providing versatility in functionality. The entire structure of the table is constructed using 0.8mm sheet thickness. The front modesty panel is fully perforated, contributing to the aesthetic appeal while maintaining a sense of openness. The gable end is made of powder-coated metal, ensuring durability and a sleek appearance. To guarantee quality and longevity, the components are made of high-quality cold-rolled close annealed (CRCA) sheet metal, treated for anti-corrosion properties. A ten-tank phosphating procedure is employed, resulting in a powder coating thickness of 60 to 70 microns, enhancing resistance to corrosion and wear. (Make- Godrej / Geeken / Delite Hi-Tech)

MID BACK CHAIR Medium Back Chair equipped with PP (Polypropylene) Armrests, Gas Lift functionality, a durable Nylon Base, and a Seat & Back Mesh Tapestry. Designed for comfort and flexibility, this chair provides mid-back support and a breathable mesh fabric for enhanced airflow. The PP armrests offer a comfortable resting position for the arms, while the gas lift allows for easy seat height adjustment, ensuring ergonomic compatibility with various desks or workstations. Additionally, the push-back feature enables users to recline for relaxation or posture changes during prolonged seating. (Make- Godrej / Geeken / Delite Hi-Tech)

THREE SEATER SOFA Size :- 2005(L) X 760(D) X 860(H)mm Providing and supplying providing and supplying a three-seater sofa designed with dimensions of 2005mm in length, 760mm in depth, and 860mm in height. This sofa boasts a sturdy wooden frame, ensuring durability and longevity while offering reliable support. Its sleek and modern design is accentuated by chrome-plated pipe frame legs, adding a contemporary touch to its aesthetic appeal. The three-seater sofa is crafted to provide both comfort and style, making it an ideal addition to various interior settings (Make- Godrej / Geeken / Delite Hi-Tech)

CENTER TABLE SIZE :-1200(L)*600(D)*450(H)mm Centre table size is 450(h)x1200(w)x600(d)mm made of SS frame+ Glass Top. The centre table glass top in 18mm PLPB duly edge banded. Frame made out of stainless steel(grade 202) square hollow pipe of size 25mmx25mmx1.2mm thickness. Provided with a bottom shelf of 18mm PLPB duly edge banded. At the bottom of table provide PVC leveller to prevent sketches from floor. (Make- Godrej / Geeken / Delite Hi-Tech)

2 BAY COMPACTOR Size :-915(L)*450(W)*2080(H)mm (Each Body) Total 20 Nos of Bodies in compactor SFF :- 1830(w)*450(d)*2080(h)mm- 1 Qty SFM :- 1830(w)*900(d)*2080(h)mm- 4 Qty Providing & Fixing Compactor of ht 2080mm.The side ,back &top of the box is made of 1 mm thick prime quantity CRCA sheet .The body has indepedent precision punches slooted strips welded at corner to support the shelves to ensure flexibility in adjusting the height of the shelves .Shelves are made of 0.8mm thk prime quality mild steel having 8 folds each designed to carry UDL of 60kgs.The shelf is fixed to the compactor body by means of a support bracked ,which facilitates adjustment of shelf at 25mm pitch ,System is provided with centralized locking arrangement on the last unit when all the units are brought together ,central lock when opeated gets locked with the plate which is welded to the rail and does not allow access to the units .The copactors shall consist of single face static unit at opened and double face mobile unit in middle and single face. (Make- Godrej / Geeken / Delite Hi-Tech)

Electrical Work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supply and fixing of 1200MM SWEEP Ceiling Fan with Regulator Model : Double Ball Bearing, Sweep : 1200mm, Body : Cast Aluminium (Both top and bottom) Colour : White, Accessories : Complete Body with Blades, Downrod, Canopies (2 numbers), Fixing Clamps & Rubber Bush. Regulator : Resistance / Switch type Electronic Input supply : Single phase 230VAC +/-10% ; 50Hz +/-5%, Make : Usha / Orient / Khaitan / Crompton Greaves/Havells / Bajaj / Almonard / Calcutta Fans. complete in all aspects as per direction of Engineer In-charge

Supply and fixing of 200MM SWEEP exhaust fans Sweep size 200 mm, No. of blades 6, Switch No, Guard No, Motor speeds (No.) 1, Motor type Normal Speed, Remote control option No, Oscillation No, Body colour White, Finish Glossy, Blade finish Opaque, Blade design Aerodynamically designed & Balanced Blade, Air delivery 520 m³/h, Rated Speed 1350 revolution per minute, Noise level 42 dB, Power consumption 32 W, Rated voltage 230 V, Rated frequency 50 Hz, Packaging dimensions WxHxD 33 cm x 15.5 cm x 33.3 cm, Weight 1.5 kg, Motor protection through thermal overload protection device N0, Guarantee 2 Year. complete in all aspects as per direction of Engineer In-charge

Supply and fixing of Philips Rectangle Shape Led Bulb 8 Watt (T-Bulb B22), Body Material : Polycarbonate, Wattage : 8 Watt, Power Factor : >0.9, Length : 8 inch, Width : 1.2 inch, Height : 4 inch, Warranty : 2 year , Luminous Efficacy (Lm/W) 70 - 140, Power Factor >0.9, Frequency 50 Hertz, Length 8 inch, Width 1.2 inch, Height 4 inch complete in all aspects as per direction of Engineer In-charge .

Supply and fixing of 18 Watt/1800 lumen 6500 K LED Tubelight, Type of Tube Light Cap G-13 Bi-pin, Ingress Protection in IP IP 20, Lamp Shell material Polycarbonate, Length of tube light 1220mm, LED lamp efficacy (Lm/W) 100, Colour Rendering Inde (CRI) > / = 80, Total Harmonics (%) < / = 15%, Beam Angle (Degree) > / = 120 degree, Operating Voltage range (Volt) 100-300, Driver Efficiency (%) more than 85%, Surge Voltage withstand (KV) 2.5 KV, LED Chip Efficacy (Lm/W) 130, Rated Voltage for Performance and life (Volt) 220-240, Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80%, LED Chip Wattage (Individual) (Watt) 0,25, Power Factor > / = 0.9, complete in all aspects as per direction of Engineer In-charge

Supply and fixing of ACEON Cool Day Light Aluminium Square LED surface ceiling Light (ACEON-36-PL),Material : Aluminium, Wattage : 36 Watt, Type of fixture Square, Color temperature (+/-10%) 6500k, Diffuser material Poly carbonate (UV stabilized), Mounting Fixture SS Spring Clip, Light Color Cool Day Light, System lumen output 1800 lumen, System Luminous flux efficacy (lm/W) 100, Working life for LED 50000 hour, complete in all aspects as per direction of Engineer In-charge.

Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

I.T. Work DELL AIO 24” 13th Generation Intel® core™ i5-13400 (20 MB cache, 10 cores, 16 threads, 2.50 GHz to 4.60 GHz turbo, 65 W),Chipset & Mother board Intel Q670 Chipset or higher, Memory -8 GB DDR4, 4800 MHz RAM or higher, expandable up to 64 GB or better, Graphics-Integrated Intel® UHD Graphics 700 series compatible with processor or better, Hard Disk Drive-M.2 512GB PCIe NVMe SSD,Display-23.8" FHD, Anti-Glare, non-touch panel, 250 nits, IPS, Comfort View Plus, TUV Low Blue Light certified ,Security-Discrete TPM 2.0 with Chassis Intrusion switch ,Keyboard,-Wired Keyboard (same make as PC),Mouse-Wired Mouse (same make as PC), Networking facility-Integrated Ethernet LAN 10/100/1000 and Intel® Wi-Fi 6 AX201, 2x2, (Gig +) + Bluetooth, Ports & Slots-1 RJ-45 port 10/100/1000, 6 USB 3.2 ports with minimum 1 USB 3.2 Gen 2 Type-C port, 1 Universal audio jack, 1 Line-out audio port (rear), 1 DP 1.4, 1 HDMI In, 1 HDMI Out, 1 SD card slot, 3 M.2 slot, 1 Kensington security-cable slot, Audio- Integrated dual Internal speakers (Min. 5W each) and Mic,Webcam-1080p FHD Webcam-5MP RGB camera + 360p at 30 fps nHD IR camera -Form Factor ,All In One Form Factor with Fixed Stand Operating System, Microsoft Windows 11 Professional 64 bit OS or better Certification,Ubuntu Linux OS Certification, EPEAT® India registered, MIL STD 810 G/H Test Passed, TCO Certified For OEM : ISO 9001 : 2008 Power Supply Minimum 160 W Internal Power Supply, 85% Efficient or better Minimum 240 W Internal Power Supply unit, 92% Efficient or better Accessories To be supplied with required accessories, connecting cables and driver media & power cable. Warranty3 years On site comprehensive Warranty

DELL AIO 24” 13th Generation Intel® core™ i3-13400 (20 MB cache, 10 cores, 16 threads, 2.50 GHz to 4.60 GHz turbo, 65 W),Chipset & Mother board Intel Q670 Chipset or higher, Memory -8 GB DDR4, 4800 MHz RAM or higher, expandable up to 64 GB or better, Graphics-Integrated Intel® UHD Graphics 700 series compatible with processor or better, Hard Disk Drive-M.2 512GB PCIe NVMe SSD,Display-23.8" FHD, Anti-Glare, non-touch panel, 250 nits, IPS, Comfort View Plus, TUV Low Blue Light certified ,Security-Discrete TPM 2.0 with Chassis Intrusion switch ,Keyboard,-Wired Keyboard (same make as PC),Mouse-Wired Mouse (same make as PC), Networking facility-Integrated Ethernet LAN 10/100/1000 and Intel® Wi-Fi 6 AX201, 2x2, (Gig +) + Bluetooth, Ports & Slots-1 RJ-45 port 10/100/1000, 6 USB 3.2 ports with minimum 1 USB 3.2 Gen 2 Type-C port, 1 Universal audio jack, 1 Line-out audio port (rear), 1 DP 1.4, 1 HDMI In, 1 HDMI Out, 1 SD card slot, 3 M.2 slot, 1 Kensington security-cable slot, Audio- Integrated dual Internal speakers (Min. 5W each) and Mic,Webcam-1080p FHD Webcam-5MP RGB camera + 360p at 30 fps nHD IR camera -Form Factor ,All In One Form Factor with Fixed Stand Operating System, Microsoft Windows 11 Professional 64 bit OS or better Certification,Ubuntu Linux OS Certification, EPEAT® India registered, MIL STD 810 G/H Test Passed, TCO Certified For OEM : ISO 9001 : 2008 Power Supply Minimum 160 W Internal Power Supply, 85% Efficient or better Minimum 240 W Internal Power Supply unit, 92% Efficient or better Accessories To be supplied with required accessories, connecting cables and driver media & power cable. Warranty3 years On site comprehensive Warranty

MFP Printer XEROX XEROX Versa link MFP - B7125 Speed - 25 ppm ,Size- A3 mono, Print copy scan, Duplex- yes ,Network- yes, SPDF- 130 sheets, RAM- 4GB,No. Of main paper tray -1,WiFi - yes

EPSON SCANNAR WORKFORCE DS-310/360W -Scanner Type : A4 compact sheet-fed, one-pass duplex colour scanner, Sensor Type : Contact Image Sensor (CIS),Scanning Method : Fixed carriage & moving document, Light Source : RGB LED, Optical Resolution : 600 x 600 dpi, Output Resolution : 50-1,200 dpi (in 1 dpi increments),Bit Depth : Each colour (RGB): 16 bit input/8 bit output Document Size Minimum : 50.8 x 70 mm, Document Size Maximum : 215.9 x 1,117.6 mm, Supported Paper Weight : 51.8-128 g/m2 (Postcard: 128-230 g/m2),ADF Capacity : 20 sheets (80g/m2),Daily Scan Volume : up to 500 pages/day, Multi-feed Detection : Length Detection, Interface : USB 3.0,Scanning Speed, Resolution (Colour/Greyscale/Monochrome),200 dpi : 25 ppm/50 ipm (AC Adapter/Built-in Battery3), 5.0 ppm/10 ipm (USB 3.0 Bus Power),300 dpi : 25 ppm/50 ipm (AC Adapter/Built-in Battery3), 5.0 ppm/10 ipm (USB 3.0 Bus, Power)600 dpi : 5.0 ppm/10 ipm (AC Adapter/Built-in Battery3/USB 3.0 Bus Power),Driver compatibility : TWAIN, SANE, WIA, ICA, ISIS, File Format : JPEG, TIFF, Multi-TIFF, PDF, Searchable PDF, BMP, PNG, Document Capture Pro (Win): JPEG, BMP, PDF, Searchable PDF, TIFF, Multi-TIFF, PNG, DOCX, XLSX, PPTX

MFP EPSON ECO TANK L6270 PRINTER Printing Method : Precision Core™ Print Head, Minimum Droplet Size : 3.3 pl, With Variable-Sized Droplet Technology, Ink Technology : Pigment black and Dye colour Inks, Printing Resolution : 4,800 x 1,200 DPI, Number of colours : 4 colour ,Printing Speed : ISO/IEC 24734 15.5 pages/min Monochrome, 8.5 pages/min Colour, Maximum Printing Speed 33 pages/min Monochrome (plain paper 75 g/m²), 20 pages/min Colour (plain paper 75 g/m²),69 Seconds per 10 x 15 cm photo (Epson Premium Glossy Photo Paper),Colours : Black [Pigment], Cyan [Dye], Yellow [Dye], Magenta [Dye],Scan Optical Resolution : 1,200 DPI x 2,400 DPI (Horizontal x Vertical),Number of paper trays : 1,Paper Formats : A4 (21.0x29.7 cm), A5 (14.8x21.0 cm), A6 (10.5x14.8 cm), B5 (17.6x25.7 cm), C6 (Envelope), DL (Envelope), No. 10 (Envelope), Letter, 9 x 13 cm, 10 x 15 cm, 16:9, Legal Duplex : Yes, Automatic Document Feed : 30 pages, Paper Tray Capacity : 250 Sheets Standard Media Handling : Auto Sheet Feeder, Automatic duplex (A4, plain paper), Borderless print Duplex : Yes, Automatic Document Feed : 30 pages, Paper Tray Capacity : 250 Sheets Standard Media Handling : Auto Sheet Feeder, Automatic duplex (A4, plain paper), Borderless print

IFPD_ 86" Display Type:LCD/Display Panel Diagonal size (mm):2159.1/Width of The Effective Display Area of the Panel (mm):1872/Height of The Effective Display Area of The Panel (mm):1053/Backlight Technology:LED/Display Resolution (Pixels):3840X2160/Display Brightness (Nits):450/Display Aspect Ratio 16:09/Touch interface :Touch sensitive as well as pen driven/Touch Technology Infrared optical/Operating System Compatibility:WINDOWS/Number of Input HDMI ports: 3 Number of USB 2.0 ports (Nos.),2 Number of USB 3.0 ports (Nos.), 2Number of Audio Input ports (Number), 1 Number of audio output ports (Nos.),1 Number of RS-232 C ports (Nos.),1 Number of RJ 45 ports (Nos.)/Numbe of VGA-IN ports (Number): 1/Number of VGA-OUT ports (Number):1/Provision of in built speakers :Yes/Provision for wall mounting:Yes/Bluetooth connectivity:No/Wi-Fi connectivity Yes/ Number of electronic pen or stylus to be supplied with the board (Nos):1/Details of software provided:Teach Infinity –II/Power Supply Voltage in AC (Volts):100-240/Power consumption (Watts) 400/Operating Temperature Range (degree celsius):0-40/Operating Humidity (%)RH:20-80/Installation Kit to be supplied alongwith the Panel:Yes/All connecting Cables and accessories to be supplied along with the Panel:Yes/BIS Registration under CRS of Meity:Yes/BIS Registration Number:R-97000566/Availability of test reports from Central Govt /NABL / ILAC accredited Lab covering all the parameters:Yes/Test Report Number:ATCC2/19112703 Test Report date:12-12-2019/Name of Test lab:AMIT TEST CENTER/On Site OEM Warranty (Year) : 3 Years

OPS Ci5/8 GB RAM/256 GB SSD/wi- fi Keyboard/Optical Mouse /windows

Video Conference 20x Optical Zoom PTZ VC Camera - Supply, Installation, testing and commissioning of 4K @30fps & Full HD 1080p @ 60fps PTZ Camera with minimum 30X Optical Zoom & FoV of minimum 68 deg , min 255 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver and should be NDI compatible. OEM should be CE, FCC, RoHS & BIS Certified

Omni directional Speakerphone Audio Technology Parameter Voice Frequency Parameter Acoustic Echo Cancellation (AEC), Echo Length ,Two way noise compression (NC), Smart microphone automatic direction ending technology (EMI),Full-duplex echo cancellation depth can ,reach more than 65Db,_500ms, Noise compression below 25dB Support ,Power Supply Built in battery Built-in 5400mA Battery, working duration is more than 10 hours. Standby time 90 days ,RJ45 network port Connect to main microphone, Main Microphone ,Interface, Expansion Microphone, Interface, Line In/out interface,RJ45 network port,USB,Power Switch 3.5mm audio input/out interface Connect to expansion microphone Type-B audio input/output interface Press for 3 seconds to turn off the device Other USB Noise Level Support System Power Supply Operation Temperature Able to connect with USB to supply power < 48 dBA Windows/Android/ios/Linux AC 100~240V, 50-60HZ, 12w 0˚~ 50˚c (Operational Statue) Other Standard accessory Optional Accessory USB cable /cascade cable/instruction manual/certificate/warranty card USB Bluetooth Adapter

NETWORKING - Comrack Floor Stand Enclosure :- R42100. 42U, RSP, D1000/ComRack Fan Tray 1U 2-Fan Position with Fans/ComRack Shelf, Fixed, 700D, Black/ComRack Shelf, Keyboard, 19", 1U, 700D, Black/Comrack Power Distribution Unit, 19", 5A 6Skt, Black/ComRack Cable Manager, Steel Loops, 19", 1U, Black ComRack Mounting Hardware (Set of 10 Cage Nuts)

D-Link CAT6 Cable, UTP (NCB-C6UGRYR-305) - 305M * 4 Bundle, Gray

D-Link CAT6 Cable, UTP LAYING CHARGES WITH CONDUIT

D-Link CAT6 Keystone Jack, UTP (NKJ-C6WHI1B21) - White

D-Link CAT6 Patch Cord, UTP (NCB-C6UGRYR1-1) - 1M, Gray

D-Link CAT6 Patch Cord, UTP (NCB-C6UGRYR1-3) - 3M, Gray

D-Link CAT6 Patch Cord, UTP (NCB-C6UGRYR1-5) - 5M, Gray

D-Link CAT6 Patch Panel, UTP (NPP-C61BLK241) - 24 Port, Loaded

D-Link Universal Back Box (NBB-011) - Square

D-Link Universal Face Plate (NFP-0WHI11) - Single

D-Link DGS-1210-28 Smart Switch

WI- fi Access Point

AIR CONDITIONER Hitachi KIYORA _COOL, Tonnage : 1.0 Ton/ Compressor: Tropical Rotary,R410A/Rated Cooling Capacity (100% Load): 12000(3516 watts)/ Rated Heating Capacity (100% Load): 13650 (4000 watts) (Make- Hitachi/Daikin/O General)

AIR CONDITIONER Hitachi KIYORA _ HOT & COOL, Tonnage : 1.5 Ton/ Compressor: Tropical Rotary,R410A/Rated Cooling Capacity (100% Load): 17400(5100 watts)/ Rated Heating Capacity (100% Load): 18100 (5300) watts (Make- Hitachi/Daikin/O General)

AIR CONDITIONER Hitachi KIYORA_COOL, Tonnage : 2 Ton/ Compressor: Tropical Rotary,R410A/Rated Cooling Capacity (100% Load): 17400(5100 watts)/ Rated Heating Capacity (100% Load): 18100 (5300) watts (Make- Hitachi/Daikin/O General)

Ridam Enterprises