Installation of new 220KV Bus Bar Protection Panels in place of old Electromechanical Panels and other associated works at 400KV Substation Bareilly under Electy. 400KV Substation Division Bareilly

Amount

Installation of new 220KV Bus Bar Protection Panels in place of old Electromechanical Panels and other associated works at 400KV Substation Bareilly under Electy. 400KV Substation Division Bareilly with all cost of men, misc. consumables, normal & special t&ps etc required to be arranged by agency for satisfactory completion of the work, with all due care of safety & precautions as per technical specifications and direction of the supervising engineer, as per details below :

Dismantling of existing old & obsolete 220KV Bus Bar Protection Panels (ABB make)and the spare panels (where New Numerical Type 220KV Bus Bar Protection Panels have to be installed) after disconnection of all the control cables including recording of connection, removal of control cables with Glands, Cutting/Removing of Earthingto complete the job in all respect and all associated works, then shifting the Panels with due care & safety to site store.

Installation & Erection of New 220KV Bus Bar Protection Panel (Nelumbo Make) at 400KV S/S Bareilly by shifting of above Protection Panel safely from store to Control room manually along with grouting and earthing of protection Panel to complete the job in all respect. This job also include Dismantling of Spare panels with safely removal of earthing where above panel has to be installed.

Laying of following sizes Copper Control Cables (Provided by UPPTCL) in the Cable Trenches with the help of Cable Tray (Provided by the Contractor) wherever required from new 220KV Bus Bar Protection Panels to CT, CB Junction Boxes, Bus-I/II/Line/Tandem Isolators in Switchyard and Control/Relay Panels in Control Room etc. including Carriage of Cable Drums from Store to Site and Shifting back to Store and all associated works to complete the Job satisfactorily as per technical specification. (Cable sizes may vary as per site availability contactor has to do at the same rate mentioned in the Agreement.)

4/5/6x2.5 sq mm size Control cable

10x2.5 sq mm size Control Cable

Termination of control cable from both side in 220KV Bus Bar Protection Panel (Nelumbo Make), Isolator MOM boxes, CT Junction boxes, CB Marshalling Boxes, BMK of 220kV LSI/BI-I/II/TI of 10 No. 220KV Line bays, 03 No. 220KV T/F bays, 01 No. B/c bay and 01 no. TBC bay to complete in all respect alongwith fixing of control cable glands, lugs, ferrules (all these of suitable sizes provided by the contractor) in each core of control cable, Termination and finally dressing of control cable with tying and placing at cable tray wherever necessary (provided by the contractor) to complete the job satisfactorily. (01 Job per Bay)

SATKAR TRADERS

Bharat Trading Corporation