KLC Old Museum-Furniture realignment and other allied works in Old Museum office in connection with implementation of e- Niyamasabha program in KLA

Amount

Civil Works in Old Museum Office

OD123821/2023-2024:Engaging coolie for cleaning and materials shifting etc.

OD123818/2023-2024:Applying anti termite treatment on floor and wall using second generation chemicals(Anti termite PREMISE350SC IMIDA CLOPRID) which Control the pest including all cost and labour charges etc complete,

OD123820/2023-2024:Providing and fixing 19mm marine ply wood ( BWP 710 gradeexterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately) etc complete as per the direction of Engineer in chrge.

9.111.1:Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood50x50 mm ( base and height)

OD123819/2023-2024: Mica paneling: Providing and fixing mica(1mm thick) on to existing ply wood using adhesive complete as per the direction of Engineer in charge including all cost of accessories, labour charges etc. complete(based on data 9.126.1 DAR)1

9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm

9.81.2:Providing and fixing bright finished brass handles with screws etc. complete:100 mm

OD124034/2023-2024:Providing and fixingauto closing cabinet hinges with necessary screws etc complete.

9.154:Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in- charge.

21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )

21.1.2.3:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

21.12.3:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

OD125330/2023-2024:Fabricating supplying and installing of the desk based modular work station of size 1200x600x750mm with table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure MS 50X50 SQUARE LEG with powder coated, cross bar square ms tube with powder coated. Below the table wire manager raceway frame for electrical and network 50mm thick x250mm Hight with powder coated are provided on main span. Above table top main span privacy 8mm thick laminated sandwich glass with holder(300mm height) , as per the direction of engineer in charge.

OD125331/2023-2024:Fabricating supplying and installing of the desk based modular work station of size 1500x750x750mm with table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure MS 50X50 Square leg with powder coated, cross bar square ms tube with powder coated. with storage facility of size 900mmx450mmx750mm including openable shutters and drawers and flip up box , as per the direction of engineer in charge.

OD125332/2023-2024:Fabricating supplying and installing of the desk based modular work station of size 1200x600x750mm with table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure MS 50X50 SQUARE LEG with powder coated, cross bar square ms tube with powder coated. Below the table wire manager raceway frame for electrical and network 50mm thick x250mm Hight with powder coated with 18mm thick PPLB pnel . as per the direction of engineer in charge.

OD125333/2023-2024:Providing and fixing movable pedestal with two drawer and storage place, made of with 18mm thick pre laminated particle board ,using telescopic for drawers, including all fittings, as poer the direction of engineer in charge.

OD125368/2023-2024:Supplying and installation of MS key board tray without a left or right side rectangular mouse pad tray, its height can be adjustable by height adjustable mouting bracket. Moves quality and smoothly with key board sliders. It has unique angled hand rest to prevent fatigue while working.Available with 200mm extension , comes with special compartment for pencil. The tray can be detached from slides(using latches). Special pressure locks at extended position, maximum load12kgs.

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

OD124055/2023-2024:Painter engaged for providing lines in inside of building.

A. NISAMUDEEN

V Sadanandan

Bidder Name

K Gopakumar

A. NISAMUDEEN

V Sadanandan