Specification No.10/2022-23

Amount

Dismantling and clearing away ( corporation limit ) from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

Pressed Tiles

Floor Finish

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay , stiff black cotton, hard red earth, shales, murram,gravel, stoney earthand earth mixed with small size boulders SS 20.A

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 50 mm Thick

Flooring with good quality of solar reflective ceramic Tiles with a size 305x 305 x7 mm of approved make laid with required slope properly to drain off water completely from roof top in CM 1:2, min 20 mm thick including cutting the tiles to the required size wherever necessary, laying in position and pointed with grouting material as instructed by engineer at site including all lead,lift etc.,complete.

Flooring with approved double charged vitrified tiles of size 600 x 600 x 8 mm over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete.

Flooring with good quality non slippery type of ceramic tiles with a size 305x 305 x6 mm of approved colour, shade and quality laid in CM 1:3,20 mm thick including cutting the tiles to the required size wherever necessary, laying in position and pointing with white cement mixed with colour pigment as per instructed by engineer at site including all lead,lift etc.,complete.

Dadooing walls with glazed tiles of size 300 x 200 x 6 mm laid in cement mortar 1 : 2 , 10 mm thick and pointing with white cement using 0.4 Kg / m2 including finishing the joint and pointing flush with tiles surface etc., complete.

Brick Work in Cement mortar 1:5 using Chamber Burnt Bricks of size 9" x 4.5" x 3" including cost of all materials,labour lead ,lift etc complete.

Plastering the walls with CM 1:5, 12mm thick including cost of al materials,labour.lead.lift etc complete.

Special type of plastering with CM 1:3 - 10mm thick by using special bonding agent and repair material including chipping of concrete, cost of materials,curing, labour, lead,lift etc., complete.

Providing flooring with ellis pattern finishing of 20mm thick with cement concrete 3 to 10mm chips & pointed with same mortor including cost of all materials, curing, etc., complete.

Supplying and fixing of PVC down fall pipe of 160 mm dia, 4 kg / cm2 with necessary, leads, lift etc complete.

White washing two coats using white cement including cost of all materials, labour, brushes, lead, lift,scaffolding charges, etc., complete.

Painting the inside walls with two coats of best quality Acrylic Distemper of approved colour over a interior primer coat of all materials, etc., complete.

Exterior painting with two coats of approved exterior emulsion over one coat of primer for wall including cost of all materials, labour, lead, lift, etc., complete.

Replacing of damaged door / windows wood with new CW planks of 30 cm wide with 25 mm thick should be fixed in position suitably as instructed by the field engineer at site incluing cost of all labour, lead, lift etc., complete.

Painting two coats with Ready mixed Synthetic Enamel Paint paint over old Grill work for the existing window including cleaning preparing the surfaces, cost of all labour, lead, lift etc., complete.

Painting two coats with Ready mixed Synthetic Enamel Paint paint over old wood work for the existing doors, window including cleaning preparing the surfaces, one coat of primer including cost of all labour, lead, lift etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non interlocking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and fixing of 1200mm (48”) sweep AC celling fan (High Speed) of reputed make complete with stepped electronic 300W regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450 mm(18”).

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make).

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Supplying and fixing of 1 x 48 W LED Street light fittings including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Fabricating Supplying and fixing in position of Aluminium anodised powder coating of required colour prelaminated board of Aluminium partitionof size 2.70m x2.10 m with required rubber beading etc, including necessary dismantling holes in RCC column, masonry wherever in necessary as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised (powder coated) single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings average anatic film thickness of 15 microns etc., complete. (With automatic door closure and hinges).

Supplying and fixing in postion of Indian Water Closet (Oriya Type) of approved quality, colour with all accesories including cost of all materails, labour, lead, lift etc., complete.

Supplying and fixing in postion of Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc.

Supplying & fixing of PVC water tank of 500 litres capacity of reputed make as per the instructon of Engineer-in-charge including cost of tank, transport and fixing charges etc., complete.

Supplying, fixing and laying of UPVC pipe ( schedule40) for water supply arrangement including cost of all materials, labour, lead, lift etc complete.

40 mm dia

25 mm dia

Supplying and fixining of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia including cost of all materials lead, lift, labour etc., complete

Supply and installation of readymade septic tank with dispersion tank at site including readymade septic tank, Dispersion Tank, transport, erection charges in suitable place as directed by the field engineer.

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as brackets , waste coupling, waste pipe, etc., including cost of all materials, labour lead, lift, etc., complete.

Supply and fixing of weld mesh 10 x 10 cm 10 guage over the roof slab below the proposed screed concrete as directed by the field engineer at site including materials, labour, lead, lift etc. complete.