Rehabilation of 2.6MGD Filteration plant in HWW in RMC.

Providing Plastering with CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding Seigniorage Charges, including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904) Plastering with CM (1:4), 12 mm thick

Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade after over a one coat of base coat, making 3 coats in all to given an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of Plastic Emulsion paint over primer coat of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for Old Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Flooring with ceramic tiles,Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711,IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc.excluding seigniorage charges,complete for finished item of work."

Charges for grouting and guniting of leakages in filteration plants and pump houses by applying chemicals and arrest the leaks including cost of all materials, conveyance and all labour charges etc., complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm) (MAT-05448)

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work. Single openable ventilator shutter size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick (MAT-01484)

Providing and fixing factory made UPVC white colour casement/Casementcum fixed glazed door comprising of UPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm). (MAT-05437)

Fabrication, supply and fixing of Extension Bows for sluice valves for filter houses Bow set and wheel made of cast iron and extension rod made of MS pipe/rod including cost and conveyance of all materials and all labour charges etc complete.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)DI with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes like contractor profit 13.615+ transportation charges 5%+ST @ 5%, etc complete For 100mm dia Sluice Valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)DI with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes like contractor profit 13.615+ transportation charges 5%+ST @ 5%, etc complete For 300mm dia Sluice Valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)DI with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes like contractor profit 13.615+ transportation charges 5%+ST @ 5%, etc complete For 250mm dia Sluice Valve

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15. For 100mm Sluice Valve

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15. For 300mm Sluice Valve

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15. For 250mm Sluice Valve

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5 For 100mm dia Sluice Valves

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5 For 300mm dia Sluice Valves

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5 For 250mm dia Sluice Valves

Manufacturing, delivery and fixing of 300 MM dia Cast iron disc type drain valve along with extension bow, operating wheel, neccessary supports, bearings etc., complete inclduing removing of old damaged disc valve inclduing cost of all materials, taxes, conveyance and all labour charges etc., complete as directed by departmental Authoriites.

Providing stainless steel railing using stainless steel tubes, sections, plates, sheets and pipes of required sizes 304 grade including labour charges for fabrication using stainless steel welding rods including buffing,polishing,lacquer finishing to present seamless finish etc.,complete.2"dia pipe .

Providing Plastering with CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding Seigniorage Charges, including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904) Plastering with CM (1:4), 12 mm thick

Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade after over a one coat of base coat, making 3 coats in all to given an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of Plastic Emulsion paint over primer coat of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for Old Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Flooring with ceramic tiles,Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711,IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc.excluding seigniorage charges,complete for finished item of work."

Charges for grouting and guniting of leakages in filteration plants and pump houses by applying chemicals and arrest the leaks including cost of all materials, conveyance and all labour charges etc., complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm) (MAT-05448)

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work. Single openable ventilator shutter size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick (MAT-01484)

Providing and fixing factory made UPVC white colour casement/Casementcum fixed glazed door comprising of UPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm). (MAT-05437)

Fabrication, supply and fixing of Extension Bows for sluice valves for filter houses Bow set and wheel made of cast iron and extension rod made of MS pipe/rod including cost and conveyance of all materials and all labour charges etc complete.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)DI with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes like contractor profit 13.615+ transportation charges 5%+ST @ 5%, etc complete For 100mm dia Sluice Valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)DI with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes like contractor profit 13.615+ transportation charges 5%+ST @ 5%, etc complete For 300mm dia Sluice Valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)DI with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes like contractor profit 13.615+ transportation charges 5%+ST @ 5%, etc complete For 250mm dia Sluice Valve

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15. For 100mm Sluice Valve

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15. For 300mm Sluice Valve

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15. For 250mm Sluice Valve

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5 For 100mm dia Sluice Valves

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5 For 300mm dia Sluice Valves

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5 For 250mm dia Sluice Valves

Manufacturing, delivery and fixing of 300 MM dia Cast iron disc type drain valve along with extension bow, operating wheel, neccessary supports, bearings etc., complete inclduing removing of old damaged disc valve inclduing cost of all materials, taxes, conveyance and all labour charges etc., complete as directed by departmental Authoriites.

Providing stainless steel railing using stainless steel tubes, sections, plates, sheets and pipes of required sizes 304 grade including labour charges for fabrication using stainless steel welding rods including buffing,polishing,lacquer finishing to present seamless finish etc.,complete.2"dia pipe .

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

3) Provision for Seigniorage charges

4) DMF @30% on Seigniorage charges

5) MERIT @2% on Seigniorage charges