LT reconductoring under Kokkad Exchange Transformer under Electrical Section, Chengamanad under Electrical Sub Division Kottarakkara

Fitting one Additional 75x40mm, 1.8m channel cross arm in existing single pole incl. conveyance of materials

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit

Providing Stay for LT poles incl. digging & back filling pit.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Providing Cable Tie

Providing End Caps

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Erection of suspension clamp for LT ABC of any size

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Installation of Pre-insulated straight through joints for 16sqmm cable

Installation of Pre-insulated straight through joints for 70sqmm cable

Installation of Pre-insulated straight through joints for 50sqmm cable

Renewal of existing damaged/broken old LT stay with existing stay rod.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Straightening one Slanted LT pole after unbinding the line and rebinding the line after work.

Reconductoring one km LT Sph 2 wire OH old line with new ACSR Rabbit conductor incl. conveyance of materials.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion

Insertion of one LT PSC pole in existing Sph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Renewal of existing damaged/old LT stay with new stay in place and refitting of all items and conveyance of all materials.

Renewal of existing damaged/old LT PSC/RCC (Sph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole)

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials

Renewal of existing damaged/old 11kV Stay with new stay in place incl. excavation & backfilling of pit and conveyance.

Renewal of existing damaged/old 11kV Fly stay with new Fly stay (excluding stay-pole & stay-rod) including conveyance.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads

Providing Strut using LT PSC pole incl. digging & back filling pit.

Renewal of existing damaged/old LT TW/RSJ/Rail (Sph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole)

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap : 4-35 sqmm

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Dismantling one LT 2 line cross arm from existing pole.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Renewal of existing damaged/old LT PSC/RCC (3ph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole)

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Fitting of one No. pole top service connection box of standard size (up to 4 way) using ss strap/B&N of suitable size in to the PSC/A poles at the standard height excluding giving connections

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling

Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc

Please Enable Macros to View BoQ information