AS AND AS TO OFFICERS MESS BLDG NO P 350 AT NAD PROVN OF HARD STANDING WALL LINING ALUMINIUM PARTITION AND VALLEY GUTTER IN CAPTAIN TECH DEPARTMENT BLDG AT INS DEGA AND PROVISION OF 02 GARBAGE PIT NEAR BLOCK J AND H AT ABE PARK VISAKHAPATNAM

Amount

Schedule 'A' Part -I (B/R WORKS)

Excavating in trenches not exc 1.5 Mtr wide & not exc 1.5 Mtr depth for foundation etc or for shafts, wells, cesspits, manholes etcand getting outsoft/loose soil.

M&L PCC 1:4:8 type D-2 ( with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm all as specified and directed by Engineer-in-Charge

Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Mild steel bars 5mm and over upto and including 10mm dia in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces.

Formwork to sides of pillars,posts, struts,piers, columns and stanchions for fair finished surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified and directed

Formwork to chullah hoods, chajjas,troughs and similar items includingedges fair finished surface complete all as specified and directed.

M&L RCC M30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete

M&L RCC M30 as in Columns, pillars, piers,posts and struts complete all as specified and directed..

M&L RCC M30 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L RCC M30 as in chajjas complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for in Item 159, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directed

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate in floor sub base

M&L 25 mm thick cement concrete in flooring type B1, 1:2:4 (20 mm graded aggregate) screed bed below floor tile

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Virified Ceramic tiles light shade 10 mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 20 mm thk cement screed bed in cm 1;6 complete all as specified and as directed.

M&L for Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layers in CM 1:6.complete all as specified and as directed.

S&F Coloured non skid ceramic joint free tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 20 mm thick screed bed or bedding layers in CM 1:6

M&L Glazed ceramic coloured tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Screed bed or bedding layer of cement mortar (1:4) 15 mm thick forbacking finishes complete all as specified and as directed.

Taking down chowkat or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

Taking down chowkat or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

S&F for anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S& F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of gin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of lasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and as directed.

Ditto above item No 38 but of Frame size 65x 100 mm

S & F for Factory Made Solid PVC/WPC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm woodgrain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm wood grain colour PVC Sheet on back face complete all as specified and directed.

Supply & fixing for frosted glass 4.80 mm thick glazing in aluminium frames and ms pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

Supply & fixing for sheet glass,ordinary quality 4.80 mm thick glazing in aluminium frames and ms pre coated frames, area exc. 0.50 sqm in each pane, complete all as specified and directed.

S&F butt hinges 100 mm long medium weight, cold rolled stainless steel complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 200mm size aluminium anodised,barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F for anodised aluminium grill (anodised transparent or dyed to required shade ccording to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Dismantling boarding any description fixed in any position with nail etc complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

M&L for preparing new surfaces on ceiling and applying two coats of oil bound distember over a coat of alkali resistent primer over 3 mm wall care putty on surfaces of false ceiling

S&F for 18mm thick Wood plastic Composite (WPC) boards with one side decorative lamination & other side balancing lamination fabricated using adhesive and all required brackets,screws ect.as in shutters including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacture instructions as specified and as directed.

S&F for 18mm thick Wood plastic Composite (WPC) boards,plain white fabricated using adhesive and all required brackets,screws ect.solid board plain, for shelf / partition including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacture instructions as specified and as directed.

Supply and fixing for 100mm size Aluminium handles, cast type,anodised,ISI marked complete all as specified and directed.

S&F for 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified.

S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as spd

S&F for magnetic PVC catcher for kitchen/shelve cup board complete.

S&F for Stalinless steel basket of 420mmX485mmx100mm with external width of 475 mm in cutlery, cup and saucer basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30 mm C/C and fixed to PVC kitchen cabinets with necessary fixing arrangments and sliding facilities complete all as specified and as directed. Make of SS Basket : Goderaj interio / Johnson Kitchens / Kohler

S&F for stainless steel two shelf bottle rack of size 200mmX485mmX420mm with external width 200mm as in spice jar, bottles,glass jar ect.plain wire basket ect to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. Make off SS Basket : Godrej interio / johnson kitchens / Kohler

S&F for Stainless steel basket of size 470mmX485mmX200mm with external width 475mm as in thali, plain wire basket ect to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. Make of SS Basket : Godrej interio / johnson kitchens / Kohler

S&F for Stainless steel basket of size 370mmX 585mmX150mm with external width 475mm, plain wire basket ect kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. Make of SS Basket : Godrej interio / johnson kitchens / Kohler

Demolition Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

Demolition of cement concrete in reinforcement and in any position not otherwise specifically provided complete all as specified and directed.

M & L for RCC 1:1.5:3 type A-1,(using 20mm graded crushed stone aggregate) as in slab supported on walls, Beams, cantilevers, bressummers,lintels over 1.5m span etc. complete all as specified and directed.

Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified .

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishe even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% complete all as specified and directed.( Note :Water proofing compound shall be measured and paid separatel)

Supply only integral water proofing compound complete all as specified and directed.

M&L for 5mm rendering thick in CM (1:3) on ceiling sufaces, finished even & smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed.

S & F for repair mirror finished Stainless Steel [Grade 304] Letter of height not less than 400 mm, made with 1.2 mm thick Hollow Tube of suitable size / pattern, fixed on Plastered Surfaces / Granite Dado etc. complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for complete removal of existing finish on walls including chajjas, facias etc. including filling of holes and cracks with putty on wall as per manufacturer's instructions and applying two coat of weather proof acrylic exterior paint (100% Acrylic)over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

S&F for Roof trusses (framed) trussed purlines, crane gantries, rails and fastenings and heavy brackets framing (beam, Tee, angle, channel or flat sections)of Fe-410-W(Gde-E-250) quality B including distance pieces, cleats etc complete all as specified and directed.

S&F for Base Plate (Plain or chamfered ) vesels, square cut or notched ordianry and counter sunk cutting holes, with riveted, bollted, or wolded attachment.

S&F for Rolled section as in framing for cladding, glazing, and the like fixed with angle cleats and connecting plates, etc.

Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete.

S&F pre painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and a directed by Engineer-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever equired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) EWC white complete incl seat and cover, flush pipe incl all joints complete.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

S&F in repairs 32 mm bore dia of discharge pipe waste coupling of PTMT (60 gm weight) (half or full threaded) .

S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S/F in repairs PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and directed.

S/F 15mm dia PVC connection pipe with PTMT nuts of length 450mm all as directed incl taking down old one.

S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms).

S&F in rotational moulded polyethylene water storage tanks two layered (ISI Marked) 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified

S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified.

S&F 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified

S&F in repairs stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets andover all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete as specified and directed.

S&F 32mm PVC pipe for waste fitting,brass , CP for glazed ware sinks,basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixedcomplete all as specified.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply and laying for 16mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed.

Supply and laying for 20mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed.

Supply and laying for 25mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed.

Taking down eaves gutters & rain water pipes ( any size or pattern) including all fittings , heads, shoes , bends, swan- necks, etc including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings & accessories) .

S&F 110 mm dia PVC (SWR) pipes single cocketed , in any length , in rubber ring joints fixed in walls.

S&F 110 mm dia bore PVC (SWR) bends .

S&F 110 mm PVC (SWR) junction single(Single T) equal or unequal with access doors.

S&F 110 mm PVC (SWR) vent cowl

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed

S&F 75 mm dia of PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as specified and directed.

S&F 75 mm size PVC(SWR) bends any radius complete all as specified and directed

S&F 75 mm PVC (SWR) junction single(Single T) equal or unequal with access doors.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

S & F 12mm thick Toughened Glass Door, Rimless swing type, fixed with frosted film or Logo of any type/ design on one side as approved by GE complete including grinding the edges complete all as specified and as directed. Note: The rate quoted shall be inclusive of provision of suitable SS locking arrangement and 300mm long Handles made with 25mm dia Stainless Steel pipe of Grade AISI 304 on both sides for each shutter.

M&L for Granite (of any type) tiles 16 -18 mm thick machine cut, in , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing ncluding 20 mm thick screed bed in cement sand mortar 1:4 complete all as specifed and directed by EIC.

S & F Aluminium Composite Panel sheet of 3 mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30 micron, fixed over the existing Frame Work with suitable Self Tapping Screws in approved pattern / size including taking down existing unserviceable boards/ sheets of any description and size complete all as specified and as directed. Make: ALSTRONG / ALCOBOND / ALSTONE Note: Frame work shall be measured and paid separately

S & F aluminium frame work fabricated out of standard aluminium anodised sections of any size suitable for aluminium composite panel, fixed with stainless steel screws in any position including use of necessary scaffolding, etc. complete all as specified and directed.

Surface dressing n exc 0.15 m deep in soft/loose soil

M & L plain cement concrete type C-2 1:3:6 [using 40 mm graded stone aggregate] as in foundation and mass concrete.

M & L for three coats of white wash over a coat of white wash including preparation of newly plastered surfaces.

M & L Hardcore of broken stone n exc. 63 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M & L 40 mm thick cement concrete type B- 1 1:2:4 using 20mm graded stone aggregate, finishing cement concrete even and smooth without using extra cement

M & L 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in pathway / plinth.

S & F 1 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc

M & L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes CM 1:6

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement & pigments.

M & L for painting new steel surface of any description ,over 10cm width or girth not otherwise described, two coats of synthetic enamel paint over a coat of red oxide.

S&F solid PVC Wall lining consisting of 5mm thick of wood grain printed PVC inclusive of solvent cement and fixing at site on PVC frame as per spedifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

Schedule 'A' Part -II (E/M WORKS)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting any type etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed multi-stranded copper cable 1100V, FRLS grade drawn in and including suitable size of PVC conduit totally concealed/surface conduit in walls/ceiling with tee , bend, elbows, junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including prefabricated modular galvanised/ plastic boxes with white modular frame and cover plate of suitable size for fixing modular switches, sockets, regulator, bell push and connecting earth wire to common earth dolly for One light/fan point/ bell point controlled by one switch complete all as specified and as directed. [Note:- The quoted rate deemed to include all the cost of cutting chasis, cementing work where required and making all the disturbed surfaces of wall / ceiling good to match the existing wall / ceiling along with same colour.]

All as per item No 126 above but for 05 Amp switch socket out let, independent all as specified.

All as per item No 126 above but for one 5 Amp switch socket out let on the same board with other switches complete all as specified.

All as per item No. 126 above but for 15/16Amp switch socket out let, independent with 4.0 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FR grade multi-stranded drawn in existing conduit with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including prefabricated modular galvanised boxes with white modular cover plate of suitable size for fixing modular switches, sockets regulator and connected the earth wire to common earth dolly for One light/fan point/ bell point controlled by one switch complete all as specified and as directed.

All as per item No 130 above but for 5 Amp switch socket out let independent all as specified.

S & F Modular switch 1 way 6A, 1 module single pole complete all as specified.

S & F Modular switch 1 way 16A, 1 module single pole complete all as specified.

S & F ceiling rose surface bakelite with 3 terminals complete all as specified.

S & F Modular Socket, 6A, 2/3 pin combined 2 module, multipurpose all as specified.

S & F Modular Socket 15/16A - 2/3 pin combined 2 module, multipurpose all as specified.

S & F Modular Fan step regulator, 120W - 2 module complete all as specified.

S & F Bell Push, Modular Type, One Module, 6 Amps, 230 Volts all as specified.

S & F Bell, Ding Dong /other sound Type, AC, 230 Volts, complete all as specified.

Taking down carefully LED fitting and fixture of any type and any capacity and refixing it at same or new location after necessary B/R work complete all as directed by Engineer-in-charge.

S & F LED tube light fittings 20 Watt of cool white comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engr-in­Charge.

S & F LED Decorative Mirror light of not less than 10 Watt with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engr-in-Charge.

S & F Building Security light LED type of minimum 30 Watt IP 66 Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to keep in safe custody for repair to wall/ ceiling and re-fixing of ceiling fan including repair of unserviceable fans or thorough cleaning of serviceable fans including connecting up including provision of 3 core flexible twisted copper conductor multi-stranded cable from ceiling rose or connector to fan. [Materials required for repair of ceiling fan will be measured and paid under separate item of this schedule]

Rewinding of ceiling fan complete upto 1400 mm sweep with heavy duty super enamelled copper winding wire of existing gauge including all insulation materials, varnishing, heating, greasing etc. after cutting and removing the old burnt winding complete all as specified and as directed. [Note:-Replacement of unserviceable parts like capacitor, bearing, bush, hanging clamp, reel & nut bolt etc measured and paid separately]

Supply only Ball bearing for Fan Bearing No 6200/ 6201/ 6202 all as specified.

Supply only Canopy for ceiling Fan all as specified.

Supply only Hanging clamp and Nut bolt with split pin and rubber shackle for ceiling Fan

Supply only Fan capacitor of capacity 2.5 mfd epoxy filled type complete all as specified.

Supply only Fan down rod upto 600 mm complete all as specified and as directed.

Painting of ceiling fans complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc

Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. min air delivery 210 CFM with BEE Five star rated with brushless direct current motor (BLDC) including taking down of old fan and depositing to MES store yard all as specified.

Taking down exhaust fan! Wall fan, sealing cable end, dismantling blades and removing fan and blades to keep in safe custody for repair to wall/ ceiling and re-fixing of exhaust fan/ wall fan after thorough cleaning including connecting up including provision of 3 core flexible twisted copper conductor multi-stranded cable from ceiling rose or connector to fan. [Materials required for repair of exhaust fan will be measured and paid under separate item of this schedule]

Rewinding of exhaust fan/ wall fan complete with heavy duty super enamelled copper winding Each wire of existing gauge including all insulation materials, varnishing, heating, greasing etc. after cutting and removing the old burnt winding complete all as specified and as directed.

M & L for welded steel wire fabric to wall for the purpose of bird/ rat guard for exhaust fan opening

Supply and fix Exhaust fan, Metal body AC single Phase. 230V of size 300mm sweep with blades, frame and louvers including making suitable hole for fixing Exhaust fan and making good to disturbed surface, matching with existing paint complete all as specified and directed

S & F heat auto clean electric chimney-wall mounted, curved glass of size 90cm with suction Each capacity 1200m3/hour, filterless, touch & gesture control complete all as specified and directed as per manufacturer instructions.

Dismantling carefully old unserviceable Main switches/ Fuse boxes/ MCB DBs including MCCBs/ Each MCBs after disconnecting main electric supply, segregating serviceable MCBs and making good of disturbed surfaces all as directed.

Supply and fixing Factory made sheet metal enclosure for VTPN MCB DB 4 way double door Each (Fixed flush to the wall), suitable for fixing MCCB upto 160 Amps 4 pole, IP-42 protection with suitably rated bus bar and suitable for mounting MCB's complete all as specified. [Note: Incoming MCCB and outgoing MCBs will be measured and paid seperately under relevant items in the schedule]

Supply and fixing of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with suitably rated bus bar and making good to disturbed surface to match the existing surface, complete all as specified. [Note: Incoming MCB and outgoing MCBs will be measured and paid seperately under relevant items in the schedule]

Supply and fixing of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with suitably rated bus bar and making good to disturbed surface to match the existing surface complete all as specified. [Note: Incoming MCB and outgoing MCBs will be measured and paid seperately under relevant items in the schedule]

S & F MCCB 4 Pole, 100-160 Amps, 50 Hz, 16 KA, 415 Volts, adjustable thermal and fixed magnetic type with MCCB enclousere along with all necessary aluminium lugs and glands, etc complete all as directed

S & F Modular Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20A rating complete all as specified. Each

S & F of MCB 63 Amp, 415 Volt, TP breaking capacity 10 KA 'C' series all as specified Each

S & F of MCB 63 Amp, 415 Volt, TPN breaking capacity 10 KA 'C' series all as specified Each

S & F MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as Each specified

S & F MCB 6 to 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as Each specified

Fixing only old serviceable MCB any type as retrieved from item No 34. Each

Taking down carefully submain wiring of any description complete including wooden battens / conduits I casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. RM

M & L for Sub main wiring with 4 runs of single core 10.0 sqmm FR PVC insulated and unsheathed multi-stranded single core copper cable 1100 V grade, drawn through and including sitable size of PVC conduit totally concealed/ surface in walls/ ceiling with tee , bend, elbows, junction box etc. alongwith provision of 2 runs of 10.0 sqmm FR PVC insulated unsheathed multi-stranded copper cable as earth continuity conductor connected to common earth dolly complete all as specified. [Note:- The quoted rate deemed to include all the cost of cutting chasis, cementing work where required and making good disturbed surfaces] RM

M & L for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, RM . 1100 Volt drawn through and including sitable size of PVC conduit totally concealed/ surface in walls/ ceiling with tee , bend, elbows, junction box etc. alongwith one run of copper earth wire 6,0Sq mm complete all as specified. [Note:- The quoted rate deemed to include all the cost of cutting chasis, cementing work where required and making good disturbed surfaces]

M & L for sub main wiring with two run of 4.0 sq. mm PVC un-sheathed, copper conductor cable, RM 1100 Volt drawn through and including sitable size of PVC conduit totally concealed/ surface in walls/ ceiling with tee , bend, elbows, junction box etc. alongwith one run of copper earth wire 4.0 sq mm complete all as specified. [Note:- The quoted rate deemed to include all the cost of cutting chasis, cementing work where required and making good disturbed surfaces]

Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100 volt grade with stranded aluminium conductor of size 50 sqmm 3.5 core including taking out old unseviceable cable complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in soft soil for laying of cable complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified

Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. [Note : punned thickness shall be measured for payment purpose]

Supply and laying in trenches Bricks; common burnt clay building bricks, sub-class 'B' designation 75 complete all as specified & directed. Per

Material and labour for 80 mm dia steel water tubes 'light grade' galvanised for cable protection including sealing both ends complete all as specified and as directed by Engineer in charge.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably Each vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type 01 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and testing on completion

S & F Square recessed mounted LED light (2'x2') of minimum 3600 Lumens (36W) warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in­Charge.

S & F Square recessed mounted LED light of round type for Ceiling cutout: 0 210 mm, height 16 mm. minimum 900 Lumens (9 Watt) with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

S & F Square recessed mounted LED light of round type for Ceiling cutout dia 210 mm, height 16 mm, minimum 500 Lumens (5 Watt) with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

S & F of Energy efficeint LED Spot Light indoor type fittings,10 W 230 Volts, including connecting up with three core PVC insulated sheathed flexible copper conductor cable of size 1.5 sqmm complete all as specified and directed by Engg-in-Charge.

S & F Air Circulator wall mounted fans decorative type 230 volts single phase oscillating 400 mm sweep suitable for wail mounting with 5 years on site replacement warranty complete all as specified and directed by Engg-in-Charge.

Supply and Install hi wall split type 1.5 TR air conditioners of 5 Star rated complete set of indoor and outdoor unit duly inter-connected with suitable size of insulated copper pipes and cables including suitable stand for out door unit,drain system with 20mm dia PVC conduit upto ground level and making good disturbed surface to match with adjoining surfaces complete including testing after completion all as directed by Engineer in charge.

Supply and install vertical / Tower pack type Air conditioner unit with cordless remote control unit, twin rotary compressor, single phase units 220V - 240V, 50 Hz of capacity 3.5 TR complete set of indoor and outdoor unit duly inter-connected with suitable size of insulated copper pipes and cables including suitable stand for out door unit,drain system with 20mm dia PVC conduit upto ground level and making good disturbed surface to match with adjoining surfaces complete including testing after completion all as directed by Engineer in charge.

S & F voltage stablizer for automatic operation, sigle phase naturally air cooled indoor type & designed for input varitation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of ( + / -) 2.5% and of capacity 4.0 KVA complete all as specified and directed.

S & F voltage stablizer for automatic operation, sigle phase naturally air cooled indoor type & designed for input varitation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of ( + / -) 2.5% and of capacity 5.0 KVA complete all as specified and directed.

M/s Sai Venkata Durga Constructions (BID ID -3089237)