Providing LWSS in GP Marathu Janed Natned Randhara Tehsil Sadar Distt Mandi HP

Amount

Cutting in earth work and disposal of excavated earth work in all kinds of soil such as pick work,jumper work,blasting work,chiselling in hard/soft rocks where blasting is prohibited in all leads and lifts complete as per the entire satisfaction of the Engineer-in-charge.

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:3:6(1cement:3 sand:6 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:1:5:3 (1cement 1.5 sand :3 crushed stone agg. 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced cement work in foundation and plinth in all leads and lifts.Foundations and plinth in all leads and lifts.

Walls (any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level in all leadfs & lifts.

Beam, cantilever, girders and lintels. Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor in all leads and lifts.

Suspended floors, Doom roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers etc. in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:- Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like in all leads & lifts. Foundations, footings, basis of columns & the like and mass concrete in all leads and lifts.

Beam, cantilever, girders and lintels. Sides and soffits of beam, beam haunching, cantilever, girders, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor in all leads and lifts.

Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like in all leads & lifts.

Providing from work of ordinary timber plankings so as to give a rough finish including centring,shuttering ,strutting and propping and centring below supporting floor to ceiling not exceeding 4 meters and removal of the same for re-in-situ reinforced concrete and plain concrete work in:- Arches , domes, vaults upto all span in all leads and lifts.

Providing and fixing precast concrete manhole cover and frame conforming to IS-12592-1988 (Part-I)and IS 12592-1991 Part-II 500 mm diameter (Medium duty in all leads and lifts.

Laying, jointing and testing in trenches galvanised mild steel tube (light grade) tube fitting In (Earth work to be measured and paid for separately ). Inlet pipe :- 100 mm dia.

Outlet pipe :-80 mm dia

Scour pipe :-100 mm dia

Providing and fixing wire gauge using galvanised M>S wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for ventilator of tank complete in all respect in all leads and lifts.

Raj Kumar