SPECIAL REPAIRS / REPLACEMENT OF INTERNAL WIRING, SUBMAIN WIRING, DBs FOR RECORD SECTION, MUSEUM AND CEILING FANS AGAINST BER AT MIC and S UNDER GE(S) AHILYANAGAR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, bell push, holders, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC holding boards/bakelite sheets for mounting switches, sockets, fan Regulators, accessories etc as specified and as directed for one light point or one fan point controlled by one, one way switch NOTES: (a) Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fixtures etc.

All as per serial item No. 2 here in before but one 6 Amp 3 pin socket outlet point on same board with other switches including earth wire.

All as per serial item No. 2 here in before but on independent board.

All as per serial item No. 2 here in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 2 here in before but for one light point controlled by 2 way switches.

All as per serial item No. 2 herein before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, Neutral and earth for one 16 Amp, 6 pin socket on independent board.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including including Sunken box, PVC holding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTES :- (a) Proper colour coding shall be adopted for wiring (for phase-RED, YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fixtures etc. (d) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.

All as per serial item No. 8 here-in-before but for one 6 Amp, 3 pin socket outlet point on same board with other switches including earth wire.

All as per serial item No. 8 here-in-before but on independent board.

All as per serial item No. 8 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 8 here-in-before but for one light point controlled by 2 way switches.

All as per serial item No. 8 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 16 Amp, 6 pin socket on independent board.

S&F switch piano, flush button, 6 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F socket outlet, flush type, 3 pin, 6 Amp, multipurpose, 230 volts, white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 3 pin, 6 Amp, multipurpose, 230 volts, white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC. all as specified & as directed.

S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F bell push, flush type, 6 Amp, single pole, 230 volts, white finish all as specified & as directed.

S&F switch piano, flush button, 6 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed.

S&F fan regulator, step type, electronic, 5 step, 230 volts, Suitable for any type of ceiling fan including BLDC fans all as specified & as directed.

S&F bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F modular switch one way, 6 Amp, one module, 230V all as specified and directed.

S&F modular bell push, 6 Amp, one module, 230V all as specified and directed.

S&F modular socket, 6A, 3 pin combined 2 module, 230V all as specified and directed.

S&F modular switch one way, 16 Amp, one module, 230V all as specified and directed.

S&F modular socket, 6A/16A, 2-3 pin combined 2 module, 230V all as specified and directed.

S&F modular fan regulator, 120 watt , 2 module complete all as specifed and as directed.

S&F modular cover plate frame, 2 module complete all as specifed and as directed.

S&F modular cover plate frame, 3 module complete all as specifed and as directed.

S&F modular cover plate frame, 4 module complete all as specifed and as directed.

S&F modular cover plate frame, 6 module complete all as specifed and as directed.

S&F modular cover plate frame, 8 module complete all as specifed and as directed.

S&F modular cover plate frame, 12 module complete all as specifed and as directed.

S&F in replacement square profile LED lighting fixture with extruded polycorbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output, with all accessories including its connection complete all as specified and directed by Engineer-in-charge. Make: HAVELLS LED PRIDE ESSENTIAL Cat No LHEXAWP71N1W020 or equivalent model of makes specified.

S&F in replacement 600 mm x 600 mm size, recess mounted LED luminaire of capacity 36 watt, with driver, for soft glare free light, AC 230 volt complete with all acessories and connections, complete all as specified & as directed. Make: HAVELLS OCTANE PLUS LED 2 X 2 PANEL Cat No LHEBAEP7lW1W036 or equivalent model of makes specified.

S&F in repairs, 210 mm x 210 mm size, flat panel square fixture, slim,compact, aluminium die cast lit panel, recess mounting 1 x 18 watt, 230 volt with opal diffuser and separate electronic driver, LED light source 6500K with uniform light output, with all accessories including connection complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP7lZ1W018 or equivalent model of makes specified.

S&F in replacement ultra modern, recess com surface panel, luminaire with driver, MS housing with high brightness LEDs fixture capacity 18 watt, LED light source 6500K with uniform light output with all accessories including connection complete all as specified & as directed. Make: Havells Cat No TRIM CLIPON LED PANEL SQUARE LHEAABP7lN1W018 or equivalent model of makes specified.

S&F in replacement 600 mm x 600 mm x 70 mm size, 36 watt LEDs luminaire fixture, with driver, ultra modern suitable for surface mounting with high brightness, prewired, including connections from ceiling rose to light fittings complete all as specified & as directed. Make : Havells Cat No. Havells Cat No PLANO SURFACE PLANOSUR2X2PLS36WLED857S0720 or equivalent model of makes specified.

S & F in replacement square profile LED lighting fixture with extruded polycorbonate,environmental friendly,energy efficient ready to use pack LED Tube light fitting 10 Watt with LED light source 6500k with uniform light output,with all accessories including its connection connection complete with all as specified and directed by Engineer-in-charge. Make: HAVELLS LED PRIDE PLUS NEO Cat No LHEXACP7IN1W010 or equivalent model of makes specified.

S&F in repairs, 110 mm x 110 mm size, flat panel square fixture, slim,compact, aluminium die cast lit panel, recess mounting 1 x 6 watt, 230 volt with opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including connection complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP7lZ1W006 or equivalent model of makes specified.

S&F in repairs LED Surface Spot light 1 x 12 watt, 230 volt with , LED light source 4000K with uniform light output, with all accessories including connections from ceiling rose to light fittings complete all as specified & as directed. Make :- Havells Cat Part No OCTANE FLOURES SURFACE SPOT LIGHT Item Code LHEEAKPDIE1K012 or equivalent model of makes specified.

Supply and fix in repair, MCB DB double door 4 way VTPN type with suitable rated bus bar, IP 43 protection, including one MCCB, 4 Pole, 100 Amps 16 KA as incomer, 50Hz,415 volts with adjustable thermal magnetic release and 08 Nos MCB SP 40 Amps 08 Nos as outgoing and connection with proper lugs complete all as specified & as directed.

M&L for sub main wiring with 4 runs of 10 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 10 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTES: (a) Proper colour coding shall be adopted for wiring (for phase-RED, YELLOW, BLUE for Earth-Green and Neutral- Black) (b) Five runs of 10 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTES: (a) Proper colour coding shall adopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 6 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTES: (a) Proper colour coding shall adopted for wiring (for phase-RED, YELLOW, BLUE for Earth-Green and Neutral-Black) (b) Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

S&F in repairs, sheet metal enclosures with plug socket, single pole and neutral with two pin and earth plug with one MCB of 20 Amps (SP) complete all as specified and as directed.

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'C' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB SPN, AC 240 V, 40 to 60 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), Tripple pole and neutral, 415 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs ISOLATOR TPN, AC 415 V, 63 amps, 10 KA capacity ,'C' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

Supply & fix exhaust fans PVC body AC single phase 230/ 240 V of size 250 mm sweep, not less than 1330 RPM and 750 Cum/hr of air delivery, with louver including making hole of size 250 mm dia in any type of wall and making good to match the surrounding area complete all as specified and directed.) Note: Quoted rates includes taking down and old fans and depositing to MES Store yard.

Supply and fix in replacement 100 mm x 50 mm size PVC casing caping with all accessories of adequate size complete all as specified and directed by Engineer in charge.

M&L for Complete Removal of existing treatment on walls and ceiling including removing nails, making good holes cracks etc brooming down or steel wire brushing scrapping down and applying two coats of Acrylic distemper of approved tint over one coat of primer to match the existing surface complete all as directed.

S&F 360 degree Ceiling-Mount PIR Motion Sensor Switch with LUX Sensor inbuilt Energy Saving Sensor, LUX Adjustment, Time Adjustment, Automatic Sensor of 220V with quick sense of maximum range up to 7 meters etc all as specified and as directed.

Supply and fixing ceiling fans with Aluminium blades, down rods, suitable for electronic regulator and accessories, 230 V, 1200 mm sweep 26 (+/- 10 %) watt. min air delivery 210 Cum/min with service value min 8 cum/min/W, BEE Five star rated with Super enamelled copper wire,class B insulation, brushless direct current motor (BLDC) without remote complete all as specified and directed.

Supply and fix three core 0.5 sqmm copper cable for connection of ceiling fan from ceiling rose all as specified and directed by Engineer- in- charge.

M/s Sudarshan Industries (BID ID -3373893)

AMAR CONSTRUCTION (BID ID -3392442)

Arihant Construction (BID ID -3374525)

HG PATHAN CONSTRUCTION COMPANY (BID ID -3392558)

M/S YASH ELECTRICAL (BID ID -3375146)

M/s. Sagar Traders (BID ID -3392687)

Ms. S.K. ASSOCIATES (BID ID -3392078)

M/s. Shahabad Enterprises (BID ID -3391864)