CA NO. CWE/AMB/SOUTH/T-01 OF 2021-22 SPECIAL REPAIRS TO BLDG NO T-04 UNDER GE(SOUTH) AMBALA CANTT

Amount

SCHEDULE A PART I (B/R WORKS) Material and labour for roof treatment over roofs comprising of following works:- (i) Taking down of all brick tiles with tar felt and mud phuska in any thickness and removal from site and cleaning the surface with water. (ii) Applying a coat bitumious primer @ 0.40 ltr/ Sqm of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps. (iii) Laying 3mm thick APP(atactic polypropylene polymer) modified prefabricated, five layer, weight not less than 3.60 kg/Sqm, water proofing membrane, black finish, reinforced with non woven polyster matt over the primer coat with overlap of 100mm at the sides and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface. (iv) One coat of bonding material i.e blown type bitumen of grade 85/25, confirming to IS 73, heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre. (v) 50mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates mixed with WPC @2% by weight of cement as in levelling course etc., including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0kg of cement per sq. metre (vi) Applying two coats of water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface Notes:-(i) Joint strength in logitudinal and transverse direction at 23'Cat 650/450 N/5 cms (ii) Tear strength in logitudinal and transverse 150'C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only.(iv) The contractor will carry out ponding test after application of APP treatment before claiming payment.

Material and labour for 40mm thick brick tiles laid on 15mm thick bed in cement mortar (1:6) and jointed and pointed in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.

All as above Item No 2.00 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 1.00 hereinbefore shall be reused after cleaning the bricks. The rate quoted shall include for cleaning the bricks also.

Dismantling floor, hearth, or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, printed glazed coloured designer ceramic tiles of size 300 x 450 x 7mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:4), and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, vitrified coloured ceramic tiles (Square/rectangular), area of each tile not exceeding 0.36 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, vitrified coloured ceramic tiles (Square/rectangular), area of each tile not exceeding 0.36 sqm and 7 to 8 mm thick, on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:4), and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base over 25mm thick PCC (1:2:4) type B1 (using 12.5 mm graded stone aggregates) set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on verticle surface or skirting, dado, riser to steps, pillars etc. over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

M&L for 18mm thick Granite (of any type) work (table rubbed and polished) in cooking plateforms, steps, jambs, pillars, window-cills and like over and including 10mm thick rendering in cement mortar(1:4) laid and jointed in neat cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for marble work, Baroda green, 16-18mm thick, one piece in width and length not less than 1.8 m , laid over and including 15mm thick bedding layer in cement mortar (1:4), table rubbed & polished in shelves etc including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of marble including rounding of front edge and finally granite finish polishing ,complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations and polishing complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for brickwork, with old size sub class 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brickwork, with old size sub class 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and as directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without extra cement all as specified and as directed.

Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3, finished even and smooth without extra cement all as specified and as directed.

Material and labour for rendering, 15 mm thick, in cement mortar 1:4, mixed with water proofing compound @ 2% by weight of cement or as per manufacturer’s instructions, on fair faces of brick work or concrete surfaces of any description finished even and smooth without using extra cement complete all as specified and as directed. Note: Supply only integral water proofing shall be measured and paid separately.

Material and labour for effloresence treatment to unplastered wall surface comprising of the following specification complete all as specified and as directed. (i) Taking down of existing plaster and cleaning of surface with mechanical means i.e wire brush/air blower etc and remove all loose / unsound material, dirt, dust etc and allow to dry for 48 hours (ii) Washing of surface with HCL acid with dilution of water in ratio 1:5 till saturation point and air dry for 24 hours. (iii) Applying a primer coat with URP mixed with cement in the proporation 1:1 (URP: cement) as bonding agent and cure the surface adeqately for at least 48 hrs. (iv) Applying coat of PMM consist of 1 part of cement + 3 part of sand + 15% URP + 20% of water (%by wt of cement) for two days. (v) Applying Two coats of URP mixed with cement by ratio of 01 kg of URP + 1.5 Kg of cement at the interval of 6 hrs. (vi) Applying Two coats of Pidifin 2K @ 2 kg per Sqm for two coats (Two component of ready to use pack) at an interval of 6 hrs after second coat of pidifin, sand shall be sprinkled as sand plaster and allow to air dry for 4 days. Notes: (a) The efflorescence treatment shall be carried out by the manufacturer or his authorised representative only (b) The efforescence treatment shall be carried out after laking down existing plaster.

Material and labour for preperation of newly plastered surfaces of walls and applying using roller two coats of oil bound distemper over a coat of chalk whitening complete all as specified and as directed.

Material and labour for preperation of old previousely treated plastered surfaces of walls and applying using roller one coat of oil bound distemper complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of ceiling and applying using roller two coats of oil bound distemper over a coat of chalk whitening complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old internal plastered surfaces of walls by steel wire brushing and washing, rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali resistant primer,complete all as specified and as directed.

Material and labour for preperation of new plastered surfaces of walls, chajjas, balcony, facias, etc. and applying two coats of exterior acrylic emulsion paint over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old internal plastered surfaces of walls by steel wire brushing and washing, rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying two coats of anti fungal acrylic emulsion paint over a coat of alkali resistant primer,complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Supply and fixing of second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty' labours; articles not exceeding 200 cu.cm each complete all as specified and directed.

Supplying and Fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.

Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing , cutting, drilling & welding, conforming to Fe-290.Gde-E-165 complete all as specified and as directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing of factory made solid panel PVC moulded door shutter with wood free EPS, 28 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, including suppling & fixing in the frame at site as per specification & drawing, with and including 3 Nos. stainless steel butt hinges of 100mm size for fixing the shutter complete all as specified and directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 100mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of aluminium handles, 150mm, cast type, anodised complete all as specified and as directed.

Supply and fixing of aluminium anodised, 100mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of aluminium anodised, 150mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of mild steel pressed handles 150mm size oval type stove enamelled black with bright bolt complete all as specified and as directed.

Supply and fixing of mild steel, 150mm long, helical door spring for door , ISI marked fixed with screws/bolts complete all as specified and as directed.

Supply and fixing of 300mm size aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base finishing the surface even and rough complete all as specified and as directed.

Material and labour for water proofing treatment with following application to sunken portion of WCs, bathroom, etc. surface complete all as specified and as directed:- (i) Cleaning of roof surface with mechanical means i.e wire brush/air blower etc. and remove ll loose/unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer cementitous composite compound coating as per following ratio:- (a) First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer modified cementitous composite compound Dr Fixit Roofseal flex @ 0.253 kg/sqm and allow it to dry for four hours. (b) Second layer of cement slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementitous composite compound Dr Fixit Roofseal flex @ 0.126kg/sqm and allow it to dry for four hours followed with water curing for 48 hours. (iii) 200 micron thick polythene film shall be pasted with adhesive over treatment. Note:- The water proofing treatment shall be carried out by the manufacturer or his authorised appplicators.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour in replacement for 18mm thick prelaminated particle board, exterior grade (grade-I), conforming to IS-14587, fixed with screws/glue, as in kitchen cupboards, cabinets, shelf for cupboard complete all as specified and directed.

Supply and fixing of continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps when open 30mm complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old or previousely treated wooden surfaces of any description over 10cm width or girth and applying one coat of approved colour synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old or previousely treated steel surfaces of any description over 10cm width or girth and applying one coat of approved colour synthetic enamel paint complete all as specified and directed.

Material and labour for preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc.,area n exc 0.1 sq. m eachand treated with tar or coal tar black paint complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Material and labour for PCC (1:5:10) type E-2 (using 40mm graded stone aggregates), as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), 75mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Supply and fixing 32mm dia high strength aluminium curtain rod with powder coating thickness 50 micron of wood finish with minimum 08 Nos rings for each meter length of ABS plastic and installation brackets of MS podwer coated, stop roller and funnels at the end for each cut length including taking down of old pelmet boxes and curtain rods as exist at site complete all as specified and directed.

Supply and fixing stainless steel plate rack 1mm thick of grade SS 304 of size 750 x 600 x 200mm weighing not less than 8 Kg each fixed with stainless steel screw to wall, complete all as specified and directed.

Supply and fixing in replacement, stainless steel sink with draining board, made out of 1mm thick sheet of grade SS 304, for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm including waste pipe and waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in repair of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in repair of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in replacement of angular stop valves, 15mm bore, brass chromium plated, ISI marked, with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in replacement of stop valves, 20mm bore, fancy type, chromium plated, ISI marked, with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in replacement of bib tap, 15mm bore, fancy type, long body, chromium plated, ISI marked, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed and taking down and removal of existing unserviceable tap of any description and size complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing in replacement of wall mixer fancy type cast copper alloy chromium plated for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

Supply and fixing in replacement of 15mm bore brass chromium plated pillar tap, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and taking down and removal of existing unserviceable pillar taps of any description and size complete all as specified and directed.

Supply and fixing of PVC connections, 450 mm long and 15mm size with bore fly nuts complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device complete all as directed.

Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in repair, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling, etc.,including taking down/removal of existing unserviceable wash hand basin of any description and size and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

Supply and fixing of 40mm bore High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply and fixing in replacement of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing in repair brass ,CP toilet paper holder fixed to wall with brass CP screws complete all as specified and as directed.

Supply and fixing soap dish brass CP , superior quality, fancy type fixed with and including brass CP screws after taking down/out as existing at site complete as specified and directed.

Supply and fixing in repair hand shower health faucet telephonic type with 8 mm dia,1mtr long flexible tube with wall hook bracket etc, suitable for 15mm bore pipe, superior quality after taking down/out as existing at site complete all as specified and as directed.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing fancy type PVC mirror cabinet with mirror of size 500x400mm fixed to wall with rawl plugs and CP screws complete all as specified and as directed.

Supply only 75mm dia cast iron Nahani trap with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and as directed.

Supply and fixing in repairs, 110mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls with clamps or laid in trenches including taking down of old pipe as existing at site complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing in repairs, 75mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls with clamps or laid in trenches including taking down of old pipe as existing at site complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing of PVC (SWR) bends/shoes,110mm bore, of any radius including jointing with solvent cement complete all as specified and directed.

Supply and fixing of PVC (SWR) bends/shoes,75mm bore, of any radius including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of 110mm bore, PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

Supply and fixing in replacement of 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

Supply and fixing in replacement of 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

Supply and fixing in replacement of 75mm bore, PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing mild steel works in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290-Gde-E-165 complete all as specified and directed.

Supply and fixing of factory made UPVC white colour Sliding window of area not exceeding 2.00 Sqm each, three track, made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), Sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc., making arrangement for fixing hardware, EPDM gasket, 1.2 mm +/- 0.2mm thick galvanized steel frame (30mm x18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch lock of zinc alloyed (white powder coated), steel roller system and required accessories complete all as specified and directed. Note:- The unit rate quoted by the contractor are exclusive of glass and includes all other accessories. Net opening will be measured for payment purpose.

All as per item No 89 here-in-before but area exc 2 Sqmtr complete all as specified and as directed.

Supply and fixing of sheet glass, 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of frosted sheet glass, 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing in replacement mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 1mm thick mild steel sheet, in two leaves, as built in furniture in cupboards, including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of approved colour synthetic enamel spray painting over a coat of red oxide primer complete fixed in brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0, complete all as specified and directed.

Supply and fixing Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame with screws with and including PVC sheet fillets of width 35mm for wall panelling to make PVC frame on wall as per spacing and details given on Page 162 of MES SSR Part II 2010, complete all as specified and as directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 25.00mm to 32.00mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (For flourescent Tube/ LH, Bldg Security light, Mirror light)/fan point/bell point controlled by one one way switch complete all as specified and as directed. Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site. (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No.96.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per Srl item No.96.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.96.00 here in before but for one light point by two nos two way switches.

Description all as per serial item No. 96 here in before but for one socket point 15 Amps, with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch modular, 6 Amps, one way, one module, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.

Supply and fixing of switch modular, 16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of socket modular, 2/3 pin, 5/6 amps, one way, two module, single pole, 230 volts complete all as specified and directed.

Supply and fixing of socket outlet, modular, 2/3 pin, 6/16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of fan regulator, modular, 120 watt, two module, 230 volts, 50 Hz, AC supply, suitable for ceiling fan any type/make/sweep complete all as specified and as directed.

Supply and fixing of switch modular, 6 Amps, two way, one module, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.

Supply and fixing of bell push, modular type, 6 Amps, 230 Volts, one module complete all as specified and as directed.

Supply and fixing of electric bell buzzer, ding dong type, AC, 230 volts, single pole complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing of ceiling rose, surface bakelite, 65x50mm, three terminals along with back plates complete all as specified and as directed.

Supply and fixing in replacement channel for fixing of LED tube rod, made of aluminium housing body in CRCA sheet, suitable for 18/20 watt LED tube light, high efficient, AC, 220-240 Volts, 50 Hz, with built in electronic drivers having THD < 10%, connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting with and including T-8 LED tube rod 1x18/20 watts, AC, 220-240 Volts, 50 Hz, high efficient T8 with aluminium extrusion heat sink for optimum performance with high lumen efficiency including taking down of old tube rod complete all as specified and directed.

Supply and fixing of decorative, surface mounted, mirror light, LED tube light wall mounting light fitting, high efficient PMMA diffuser, aluminium housing in CRCA body suitable for and including 10 watt LED tube, high efficient, AC 220-240 volts,50 Hz, and compact and energy efficient, epoxy powder coated, CRCA sheet, connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing old unserviceable light fitting of any description and removal from site complete all as specified and directed.

Supplying and fixing in replacement, 10 watt LED bulk head light fitting with10 watt LED lamp and holder complying IP66 ingress protection and inpact resistance of IK09 long life, 50000 burning hours, including connecting up using three core, twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light and disconnecting and taking down of existing light fitting and removal complete all as specified and directed .

Supply and fixing in replacement of LED security light luminaire 30 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.

Supply and fixing in replacement of surface mounted LED round/square type wall mounted light fittings with and including 9 watt LED lamp with B22 base,connected with 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting complete including disconnecting and taking down existing light fitting and removal complete all as specified and as directed.

Supply and fixing in repair of temprature resistant PVC connections, 450 mm long and 15mm size with brass nuts on both ends complete all as specified and directed.

Taking down geyser of any capacity and make for servicing and replacement of defective parts including painting two coats of white duco paint and writing MES Ser No with black paint and refixing on same or other location after making it functional and making water connection complete all as specified and directed.

Taking down fan any type/description, after disconnecting all electrical connections carefully, sealing cable end, dismantling blades and removing fan and material and labour for scrapping old paint, cleaning dust and washing with washing powder, filling cavities with filler, spray painting complete fan with two coats of synthetic super enamel paint, writing MES No with black colour permanent marker and hanging the fan at the existing or new location and making all electrical connections using 3 core copper flexible cable drawn through flexible PVC conduit pipe and testing complete all as specified and directed.

Supply and fixing in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps C curve 240 volt complete all as specified and directed.

Material and labour for sub main wiring with two single core, 4 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 4 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Supply and fixing of sheet metal enclosures vertical load line TPN distribution board, 4 ways, double door powder coated alongwith 250 Amp rated busbar with and including MCCB 4 pole 160 Amp, 25kA, adjustable type as incomer with suitable size of MS cabinet fabricated by 2mm thick MS sheet and making all type of connections using proper size of gland for incomer cable complete loadline TPN concealed on wall surface & making good the disturbed surfaces as per existing and dismantling and taking down the existing DB's of any type complete all as specified and as directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 8 way, acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 200 amps fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down and removal of old unserviceable DB with MCB of any capacity, size and type complete all as specified and directed. Note :- MCB shall be measured and paid separetely.

Supply and fixing of MCB SP, 6 to 32 Amps, 240 volt, 10 KA, 'B' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Supply and fixing of MCB SP, 40 to 63 Amps, 240 volt, 10 KA, 'B' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Supply and fixing of MCB SPN, 16 to 32 Amps, 240 volt, 10 KA, 'B' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Supply and fixing of MCB SPN, 40 to 63 Amps, 240 volt, 10 KA, 'B' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

M & L for taking down of electric energy meter of any capacity after disconnecting electric connections and refixing the same after servicing and cleaning with and including new polycarbonate meter box of suitable size, making electrical connections complete all as specified and directed.

S&F of LED lamp of capacity 9 watt with base B22 suitable for wall bracket lights/holder complete all as specified and directed.

Supply and fixing of Television (TV) socket outlet, 2/3 pin, 5 Amps, 230 volts complete all as specified and as directed.

Supply and fixing of rigid non-metallic PVC conduit, 20mm dia, exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.for passing TV cable concealed in wall/ceiling/floor etc. complete all as specified and directed.

Note:- Amount of credit of Rs. 72,525.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 18R & 19R of tender documents in pdf form which will be deducted offline while acceptance of tender.

OJHA ENTERPRISES

Karishan Kumar goel