Building Work

Repairing and Renovation work at ITI Khambhlav, Ta. Jalalpore, Dist. Navsari (Shutter

repairing in Welder Trade, Upper Shade repairing of Main Gate, Main Gate Repairing,

Maintenance of Street Light in Compound & Building, Shed Repairing of Open Space

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Dismentling doors, windows, ventilators etc. (wood 9.00 No 257.62

or steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(ii) Exceeding

2 Dismentaling of sheet roofing including ridges, Hips, 22.68 Sqm 54.78

Valleys, Gutters etc. stacking of serviceable materilas

and disposal of unserviceable materials with all lead

and lift.(ii) A.C. sheet

3 Brick work using common burnt clay building bricks 8.01 Cum 4121.55

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional

4 Removing and scraping of old deteriorated plaster of 496.32 Sqm 20.06

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

5 Providing 15mm thick cement plaster in single coat 231.12 Sqm 198.92

on Rough (Similar)side of single or half brick walls

for interior plastering including providing SS wire

mesh in crack portion upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-

6 Providing 20 mm thick double coat mala cement 300.00 Sqm 279.29

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc.

7 Providing and fixing rolling shutters of approved 21.66 Sqm 3554.40

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete.(A)

Shutters having width below 3.5 M.S.Grill

8 Providing, fixing, and furnishing ACP (Aluminium 74.00 Sqm 4176.35

Composite Panel) cladding for the entrance, exterior

walls, columns, canopy, or any building element. The

work includes all necessary MS angling, fixtures,

fasteners, fitting materials, hardware, and finishing,

to be completed as per the provided drawings or as

directed by the Engineer-in-

Item Description of Item Quantity Unit Rate In Amount

9 Applying two coats of putty & two coats of primer of 10460.98 Sqm 40.59

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

10 Wall painting (two coats) with plastic emulsion paint 6761.36 Sqm 81.05

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

11 Wall painting (two coats) with plastic emulsion paint 3699.62 Sqm 86.60

of approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

12 Finishing wall with weather proof exterior emulsion 5095.99 Sqm 117.40

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

13 Removing dry or oil bound distemper by a washing 15556.97 Sqm 11.58

and scraping and sand papering the wall

surfacesmooth including necessary repairs to

scratches complete.

14 Providing and erecting double bamboo scaffolding on 2200.00 Sqm 95.95

exterior surfaces of building for plastering, painting,

waterproofing and repair works, including working

platforms, guard rails, ladders, tying arrangements,

maintenance during execution and dismantling after

completion of work complete as directed by Engineer-

15 Providing and fixing polished 18 mm thick Green 115.72 Sqm 2210.89

Marble stone with full round edge and polished of

approved quality in clading on sill and around the

doors/ windows/ ventilation with 20 mm thick

cement plaster CM (1:4) and fixing with cement

slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc.

16 Providing and fixing G.I. barbed wire fencing on top 500.00 Sqm 121.20

of existing compound wall with approved quality G.I.

barbed wire of 12 SWG in required rows, including

fixing with existing M.S. angle posts, binding wire,

staples, nuts, bolts and all accessories, complete as

directed by the Engineer-in-Charge.

17 Providing and Fixing 6 mm thick Lexan 71.69 Sqm 1441.90

Polycarbonate multi wall roofing sheet fixed with

hilti screw and rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete as directed by

Engineer in charge.

Item Description of Item Quantity Unit Rate In Amount

18 Providing valleys 900mm overall in plain 1.6mm 13.40 Sqm 1078.46

thick G.I. sheet fixed with G.I. J or L Hooks, Bolts and

nuts glavanised iron J or L Hooks Bolts and nuts 8mm

dia G.I. Limpet and bitumen washers complete.

19 Steel work, welded in built up sections framed work 3724.15 kg 99.08

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In

beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to

common rafters and the like

20 Providing and fixing extruded aluminum window 29.19 Sqmt 2140.33

having extruded aluminum Colour Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt.

1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window

21 Providing and laying chemical waterproofing 1115.12 Sqm 151.50

treatment on terrace slab by cleaning the surface

thoroughly and applying one coat of approved silane-

siloxane based penetrating waterproofing chemical

mixed with water in the specified proportion using

brush, roller or spray equipment. After allowing the

treated surface to dry adequately, applying one coat

of approved elastomeric acrylic waterproofing

coating diluted as per manufacturer's specifications

on the dry surface by brush or roller. The treatment

shall be carried out strictly in accordance with the

manufacturer's specifications and as directed by the

Engineer-in-Charge. After completion of treatment,

the terrace shall be ponded with water for a period

of not less than fourteen days or as directed by the

Engineer-in-Charge to verify the effectiveness of the

waterproofing system. The rate shall include cost of

all materials, labour, tools and plants, surface

preparation, cleaning, curing, testing, scaffolding if

required, and all incidental charges complete.

22 Finishing wall with Rustic Regular Surface Texture 350.00 Sqm 656.50

Plaster. Made from quality pigments and resins,

Rustic Regular Surface Texture Plaster is durable,

water & weather resistant. Rustic Regular Surface

Texture Plaster is free from harmful chemicals,

VOC,including scaffalding for all heights and free foul

smell..etc complete For all floor

Item Description of Item Quantity Unit Rate In Amount

23 Providing and fixing concealed center point to wall 84.00 Rmt 338.24

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 32 mm..

24 Providing and fixing concealed center point to wall 94.00 Rmt 447.72

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 40 mm..

25 Repairing 50 mm to 75 mm wide cracks in C.C. Road 150.00 Rmt 404.00

by cutting to regular shape, cleaning and filling with

rapid hardening cement mortar/concrete including

bonding coat, finishing and curing complete as

directed by Engineer-in-Charge.

26 Providing and fixing 150 mm high English/Gujarati 80.00 Nos. 353.50

letters made from 1.0 mm thick stainless steel sheet

including fabrication, polishing, fixing arrangement

and installation complete as directed by Engineer-in-

27 Replacing old & u/s by Providing following type of 54.00 Ea. 151.50

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge. (1) One

No. SP 6 Amp. Cat.III

28 Replacing old & u/s by Providing following type of 28.00 Ea. 151.50

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge.

(2) One No 5 pin plug Cat.III

29 Replacing old & u/s by Providing following type of 9.00 Ea. 398.95

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge.

(5) Electronic hum Free steps EME Fan regulator,

30 Replacing old & u/s by Providing following type of 12.00 Ea. 180.79

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge

(9) 16 Amp. SP one way switch Cat.III

Item Description of Item Quantity Unit Rate In Amount

31 Replacing old & u/s by Providing following type of 14.00 Ea. 199.98

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge

(10) 6/16Amp. Universal socket Cat.III

32 Replacing old & u/s by Supplying and erecting 107.00 Mtr. 58.58

Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be

erected as directed. (e) 1.50 Sq.mm 3 core round PVC

33 Providing & Erecting 3mm thick Polycarbonate (PC) 150.00 Sq.inc 3.03

sheet with grooving as directed. h

34 Providing & erecting Switch board for Computer or 2.00 Ea. 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base

frame covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug, Cat.III

35 Replacing old & u/s by Supplying and erecting LED 35.00 Ea. 535.30

indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver (v) 36-40

Watts, Surge-2 kV, IP-20, conventional 4 feet, Cat.III

Item Description of Item Quantity Unit Rate In Amount

36 Replacing old & u/s by Supplying and erecting LED 18.00 Ea. 4248.06

street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

%, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection, (ii)

48 - 59 Watts, Cat.III (Replacing-12, Providing-6)

37 Replacing old & u/s by Supplying and erecting LED 10.00 Ea. 5080.30

street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

%, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection,

(iii) 60 - 89 watts, Cat.III (Replacing-6, Providing-4)

38 Providing and erecting Miniature circuit breaker 20.00 Ea. 297.95

single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark , Cat.III

39 Replacing old & u/s by Providing & erecting 415 V 2.00 Ea. 655.49

MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to

IS :8828 in existing box having following capacity (a)

6 to 32 Amp. Cat.III

40 Providing and erecting HOT deep Galvanised iron 5.00 Kg 77.77

strip wire 8 to 16 SWG.

Item Description of Item Quantity Unit Rate In Amount

41 Providing and erecting Pipe type earthing having 150 4.00 Ea. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth

pit complete with necessary 8 SWG earth wire.

42 For using salt and charcoal / coke as required for 4.00 Ea. 171.70

pipe type earthing.

43 Supplying & erecting in earthpit of minimum bore 2.00 Ea. 7095.25

dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per

IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection

terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test

report must be submitted by Agency. [B] For

Electrical installation up to 11 kV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

44 Replacing old & faulty cable by Providing and 415.00 Mtr. 151.50

erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

1.1 kV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables. (B)

4 core 6 Sq. mm.

45 Making trench in soft soil of suitable width of 90 cm 60.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

46 Providing & laying approved make Double walled 70.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting

accessories of same material at required depth in

existing trench for laying of cable. below ground /

road surface for enclosing cable. (A)50 mm outer dia

Item Description of Item Quantity Unit Rate In Amount

47 Replacing old & u/s by Providing & erecting 9.00 Ea. 1948.29

Approved make Power Saving 45 - 50 Watt Ceiling

Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades

with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in

charge) (Replacing-6, Providing-3)

48 Replacing old & u/s Supplying & erecting approved 4.00 Ea. 515.10

make SMC press moulded composite FRP. loop-in,

loop-out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp

with nuts, bolts & washers suitable for erection on

pole with cable clamps& earth bolt of following size

of box. (B) 250mm x 200mm x 100mm [deep] (B)

250mm x 200mm x 100mm [deep]

49 Replacing old & u/s Providing and erecting street 5.00 Ea. 614.08

light pole bracket comprising main B Class GI pipe of

4.2 cm/require outside dia. complete with suitable B

Class G.I sleeve tubing of approx. 45cms.length and

suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fasteners for fixing the brackets and

having spread of 1 mtr. length with suitable rise as

per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted

with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following

nos of arms. [A] Single Arm bracket 1 Mtr.

50 Replacing old & u/s Supplying and erecting B class 5.00 Ea. 343.40

galvanised iron pipe 32 mm outside dia 45 cm long

duly welded on 20 cm x 20 cm x 3 mm thick M.S. base

plate, erected on wall or corner for mounting street

light luminaire with necessary hardware materials

51 Replacing old & u/s Providing and erecting Inverter 4.00 Ea. 53083.58

based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower

motor with its accessories by means of extra

supplied proper insulated copper tubing,drain PVC

pipes suitable for ( cost includes Eco Friendly green

gas charging and 15A plug top & Remote Control &

MS Stand) with necessary core cutting. (1) For ISEER

Range (KWH/KWH)(3.1 to 3.99) (B) for 1.5 ton

capacity - Premium Cat.

52 Replacing old & u/s Supplying and erecting insulated 20.00 Rmt. 1158.47

pair of soft copper tubing open or concealed

including power and control cable,necessary PVC

drain pipes for Split/Cassette AC machine up to 4 TR

Item Description of Item Quantity Unit Rate In Amount

53 Supply and Erecting of Static Stabilizer suitable for 4.00 Ea. 3030.00

following capacity of A.C Machine the Stabilizer Must

have Minimum Technical Specification are Input

working Single Phase Voltage Range Up to 150V-

280V.50Hz, Output Voltage Range Up to 200V-

240V,50Hz,Autoreset Facility,LED Display for

Indicating Voltage,Spike/Surge Protection,Time

Delay Facility,Proper Wall Mount Facility with

Required Accessries & on site 3 year

Replacement/Repairing Warranty.

(1) For 1.5Ton Thermal Overload Protection 12 Amp.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Credit Value of Dismentalled Materials as per T.S of Amount Rs. 31609.65 (Electric Work+

1 Civil Work) shall be recovered from the 1st Running Bill of the Contractor.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

2 Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

5 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt.

mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Navsari ( R & B ) Sub Division Navsari ( R & B ) Division

Navsari Navsari