Special Repair Work For C-01 & Police Station At Salaya, B-16,C-01 & Police station At Vadinar, Sump & Pump Room At Dwarka Police Station, Dist: Dev-Bhoomi Dwarka (Including Electrification)(SBD) (4th Attempt)

Name of Work : Special Repair Work For C-01 & Police station At Salaya, B-16,C-01 & Police station At Vadinar, Sump & Pump

Room At Dwarka Police Station, Dist: Dev-Bhoomi Dwarka (Including Electrification)

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Dismantling existing plaster racking out joints and cleaning the surface for plaster at all Rupees Nineteen and Paisa

heights including disposal of rubbish to the dumping ground within of any lead. Sixty Nine Only

Dismantling Sanittary fitting like wash basin, W.C. pan indian and europion type, flushing Rupees Four Hundred Ten

tank etc. including staking the material with all lead and lift. and Paisa Thirteen Only

Dismantling tiles or stone floors laid on mortar including stacking of serviceable materials

Rupees Fourty Eight and

3 and disposal of unserviceable materials with all lead and lift.disposal of rubbish to the 589.00 Sqmt 48.63

Paisa Sixty Three Only

dumping ground within of any lead.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

Rupees One Hundred Ninety

4 chowkhats architraves, holdfasts and other attachment etc. complete and stacking them 12.00 Each 190.19

and Paisa Nineteen Only

within all lead and lift. (i) Not exceeding 3.00 Sq.M. in area.

Removing and Refixing after proper Repairing the Shutters of doors, windows, Rupees Three Hundred

5 Cupboards, Ventilators with providing necessary wood corner M.S. plate supports, Hinges 16.00 Sqmt 321.78 Twenty One and Paisa

etc. complete. Seventy Eight Only

Demolition of Brick work and stone masonry including stacking of serviceable materilas Rupees Five Hundred Fifty

6 and disposal of unserviceable materials with all lead and lift. (ii) In 4.00 Cum 557.32 Seven and Paisa Thirty Two

Cement Mortar. Only

Rupees One Thousand

Demolition including stacking of serviceable materilas and disposal of unserviceable

7 3.00 Cum 1071.63 Seventy One and Paisa Sixty

materials with all lead and lift. (i) R.C.C. work

Rupees Two Hundred Sixty

Excavation for foundation Up to 1.5 M. depth including sorting out and stacking of useful

8 22.00 Cum 264.44 Four and Paisa Fourty Four

materials and disposing of the excavated stuff of any lead& Lift. [C] Hard Murrum

Rupees Two Hundred

Excavation for foundation Up to 1.5 Mt. depth incluing sorting out and stacking of useful

9 40.00 Cum 275.31 Seventy Five and Paisa

materials and disposing of the excavated stuff of any lead& Lift.. [D] Soft Rock

Thirty One Only

Rupees Six Hundred Twenty

Excavation for foundation Up to 1.5 Mt..depth including sorting out and stacking of useful

10 30.00 Cum 621.26 One and Paisa Twenty Six

materials and disposing of the excavated stuff of any lead& Lift. [E]Hard Rock

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Excavation for foundation from 1.5 Mt. to 3.00mts .depth including sorting out and Rupees Six Hundred Fourty

11 stacking of useful materials and disposing of the excavated stuff of any lead& Lift. [E]Hard 30.00 Cum 644.81 Four and Paisa Eighty One

Excavation for foundation from 3.00mts to 5.00mts Mt..depth including sorting out and Rupees Six Hundred Sixty

12 stacking of useful materials and disposing of the excavated stuff of any lead& Lift. [E]Hard 18.00 Cum 668.36 Eight and Paisa Thirty Six

Providing and applying Crackfilling material in existing RCC members by Sika dur-31 or

its equivalent as approved by engineer in charge. Rates are inclusive of preparing the

Rupees One Hundred Fifty

surface by cleaning, making groove in RCC member, applying Sika Rust off 100 in

13 115.00 Rmt. 156.75 Six and Paisa Seventy Five

existing reinforcement if visible, mixing components of chemicals in slow speed electric

drill them apply mixed Sika dur-31 to the opened crack with a trowel, spatula or by glove-

protected hand.

Rupees Two Thousand

Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 M/C stone

Seven Hundred Fourty Two

14 aggregates 20mm nominal size) and curing complete excluding cost of form work in 10.00 Cum 2742.27

and Paisa Twenty Seven

Foundation and Plinth.

Providind & Laying Cement Concrete work (1:2:4) ( 1 cement ; 2 coarse sand; 4 M/C

stone aggregates 20mm nominal size) and curing complete excluding cost of form work Rupees Three Thousand

Of Plywood Only With Fair Finish And Proping Must Be Of Steel Only So As To Give A Seven Hundred Fourty Seven

Fair Finish but excluding cost of reinforcement Rate also inclusive of providing & mixing and Paisa Twenty Seven

of plasticiser as per approved make in propotion as per mix design for R.C.C. work in (A) Only

Foundations, Footings, Base of Columns and Mass Concrete.

Providing and laying CRS reinforcement (Grade Fe-500) for RCC work including

Rupees Ninety Eight and

16 cutting,bending,binding and placing in position etc.comp for all floor..(Brand As Approved 7530.48 Kg. 98.18

Paisa Eighteen Only

Providing and laying controlled cement concrete M - 250 including finishing smooth with

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish Rupees Four Thousand Six

17 And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of 17.45 Cum 4698.75 Hundred Ninety Eight and

reinforcement Rate also inclusive of providing & mixing of plasticiser as per approved Paisa Seventy Five Only

make in propotion as per mix design for R.C.C. work in Column Footing.

Providing and laying Controlled cement concrete M-250 and with curing etc. complete

Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Must Be Rupees Nine Thousand Nine

18 Of Steel Only So As To Give A Fair Finish but exculding the cost of reinforcement for 27.20 Cum 9958.17 Hundred Fifty Eight and Paisa

RCC WALL heving any cross sectional area of wall For any Height .Rate also inclusive of Seventeen Only

providing & mixing of plasticiser as per approved make in propotion as per mix design.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and laying controlled cement concrete M -250 including finishing smooth with

curing complete(Including the Cost Of Form Work Of Plywood Only With Fair Finish And

Rupees Eight Thousand Nine

Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of

19 2.00 Cum 8957.76 Hundred Fifty Seven and

reinforcement Rate also inclusive of providing & mixing of plasticiser as per approved Paisa Seventy Six Only

make in propotion as per mix design for R.C.C. work in IN Column upto Plinth. having

any cross sectional area of Column.

Filling available excavated earth (excluding rock) In trenches. plinth, sides of

Rupees One Hundred Thirty

20 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 22.00 Cum 135.56

Five and Paisa Fifty Six Only

disposited layer by ramming and watering.

Rupees Two Hundred Ninety

Filling in Foundation and Plinth with selected soil or murrum in layers of 20cms. thickness

21 25.00 Cum. 298.79 Eight and Paisa Seventy Nine

including watering, ramming, consolidating and dressing etc.complete

Providing and laying controlled cement concrete M-250 including finishing smooth with

curing complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And

Rupees Ten Thousand

Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of

22 2.00 Cum. 10799.24 Seven Hundred Ninety Nine

reinforcement Rate also inclusive of providing & mixing of plasticiser as per approved

and Paisa Twenty Four Only

make in propotion as per approved make in propotion as per mix design for R.C.C. work

in in IN COLUMN having any cross sectional area of Column at Ground floor.

Providing and laying controlled cement concrete M - 250 including finishing smooth with

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish

Rupees Nine Thousand

And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of

23 4.00 Cum. 9095.07 Ninety Five and Paisa Seven

reinforcement Rate also inclusive of providing & mixing of plasticiseras per approved

make in propotion as per mix design for R.C.C. work in Beam having any corss section

area of BEAM for Ground Floor.

Providing and laying controlled cement concrete M - 250 including finishing smooth with

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish

And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of Rupees Eight Thousand Fifty

reinforcement Rate also inclusive of providing & mixing of plasticiser as per approved Four and Paisa Thirty Only

make in propotion as per mix design for R.C.C. work in Slab of thickness 10 CM to

CM for Ground Floor.

Providing and laying controlled cement concrete M - 250 including finishing smooth with

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish

Rupees Seven Thousand

And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of

25 7.00 Cum. 7735.86 Seven Hundred Thirty Five

reinforcement Rate also inclusive of providing & mixing of plasticiser as per approved and Paisa Eighty Six Only

make in propotion as per mix design for R.C.C. work in Slab of thickness 13 CM to

CM for Ground Floor.

Providing and laying controlled cement concrete M - 250 including finishing smoothwith

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish Rupees Eight Thousand

26 And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of 0.50 Cum. 8805.84 Eight Hundred Five and

reinforcement Rate also inclusive of providing & mixing of plasticiseras per approved Paisa Eighty Four Only

make in propotion as per mix design for R.C.C. work in Lintel for Ground Floor.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & Fixing FRP/PVC Sheet Chajja including all required fabrication job with fixing

at site by means of fasteners/civil works by chipping and remarking good finish plastering Rupees One Thousand Eight

27 etc. complete job includes water proofing treatment on junction of wall and chajja with 10.00 Sqmt 1820.26 Hundred Twenty and Paisa

providing required water proof sealant, cement vata etc.complete as per direction of site Twenty Six Only

Providing & Laying Autoclaved Fly Ash / Sand Based Cement Concrete (AAC) Masonary

Blocks of Size (Length 400, 500, 600. Height 200, 250, 300. Width 100, 125, 150,

230, 300. Confirming to I.S. 2185 (Part - 3) having Compressive Strength not less than

4.00 N / mm2 (Heavy strength) and Jointed with Block Jointing mortar having Tensile Rupees Four Thousand Eight

28 Strength not less than 0.8 N / mm2 and ensuring long lasting thermal insulation according 7.00 Cum 4868.48 Hundred Sixty Eight and

to European Norms (EN13501-2) suitable for High Performence of External & Internal Paisa Fourty Eight Only

Concrete Walls, Joints having thickness in thin layer 3mm to 4mm between masonary

units. Masonary Blocks need not to Pre-Wet the Blocks or Post Cure the Wall with

Water.for Ground floor

Brick Work using common burnt clay building bricks having crushing strength not less Rupees Four Thousand Four

29 than 35 Kg./Sq cm. In super structure above plinth level upto floor two level. Conventional 11.00 Cum 4451.53 Hundred Fifty One and Paisa

bricks in cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for Ground Floor Fifty Three Only

Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and

Rupees Two Hundred Nine

30 finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating 93.00 Sqmt 209.88

and Paisa Eighty Eight Only

coat of neat cement slurry AT Ground Floor.

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for

Rupees Two Hundred Nine

31 interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) 199.60 Sqmt 209.38

and Paisa Thirty Eight Only

including finishing with floating coat of neat cement slurry at GROUND FLOOR.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level

Rupees Three Hundred

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick

32 185.00 Sqmt 312.56 Twelve and Paisa Fifty Six

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height(Gutka Plaster

Provinding CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 Rupees Twenty Four and

including neat cement finishing, watering etc. Complete. Paisa Four Only

Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs and

sills of doors & windows using neat cement slurry laid over 20 mm average base of

cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry including Rupees Two Thousand Four

racking(Tancha Work) rubbing and polishing,scaffoldings,tools and tackles,scaffolding Hundred Twenty Eight Only

etc. complete(with base of neat cement) as per direction of Engineer in charge including

rounding the exposed edges as directed.

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

Rupees One Thousand Four

fixing on existing flooring by adhesive including dismentaling of existing flooring and

35 28.00 Sqmt 1461.92 Hundred Sixty One and Paisa

material jointed with color cement slurry including finised with flush pointing & cleaning the

Ninety Two Only

surface etc.Completed Brand of the tiles shall be as per approved make list of GSPHCL.

Shade & Size of tiles shall be as specified in tender item.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Provinding & laying Printed / Coloured GLAZED TILES 8 mm thick in skirting, risers of Rupees One Thousand Four

36 steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & 56.12 Sqmt 1473.50 Hundred Seventy Three and

jointed with white cement slurry.(300mm x 600mm) Paisa Fifty Only

Provinding and Laying 25mm thick Machine Cut Rough Kota Stone Flooring over 20mm

Rupees Seven Hundred

37 thick base of C.M. 1 : 5 (1-cement : 5- coarse sand ) including pointing with C.M. 1 : 2 (1- 5.00 Sqmt 676.05

Three and Paisa Ten Only

cement : 2- stone dust ) etc. Complete. (A) 25mm thick.

Providing and laying 25mm thick Double Dimond Polished KOTAH STONE SLAB

Rupees One Thousand One

FLOORING over 20mm average thick base of cement mortar 1:6(1 cement; 6 coarse

38 43.00 Sqmt 1102.90 Hundred Two and Paisa

sand) over and jointed with grey cement slurry including rubbing and polishing etc.

complete for All floors.

Provinding 10 mm thick cement PLASTER in single coat of interior plastering and

finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with Rupees One Hundred Ninety

floating coat of neat cement slurry including providing and mixing with Water Proffing One and Paisa Ninety Only

material For G.F.

Providing and laying integrated cement based proprietary water proofing treatment of

required thickness over the roof including providing and applying two coat of Acrylic

polymer of approved brand & manufactures and china mosaic fitting and finally finishing

the surface with white cement slurry and sloping out terrace slabs with following Rupees Five Hundred Sixty

40 specification laid to required slope not flotter than 1 : 80(incl treating the vertical surface of 504.00 Sqmt 564.94 Four and Paisa Ninety Four

the parapet wall upto 20cms height above finished level of terracing including Only

finishing,curing,testing etc. comp.Rate is incl. ten years performance of guarantee bond to

be given on stamp paper. (No extra shall be paid for increase in thickness for proper

(a) Applying a two coat of Acrylic based polymer of approved brand & manufactures and

as per recommandation of manufactures over the RCC slab incl.clearing the surface

before treatment.

(b) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement

mortar of mix 1:3 (1 cement : 3 coarse sand) admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

(c) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing for final test.All above operations to be done in order and as directed and

specified by the engineer in charge.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Provinding and laying inegrated cement based proofing treatment of required thickness

over the roof including 10mm thick waterproofing cement plaster in cement plaster in

cement mortar1:3 and chaina mosaic fitting and finally finishing the surfase with white

cement slurry and slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet Rupees Eight Hundred Ten

or the lowest point of the finishedslope shall not be less then 45mm, including treating the and Paisa Sixty Only

vertical surfaseof the parapet wall up to 20cms . height above finished level of terracing

including finishing the top with joint less water proofing plaster , curing , testing etc.

complete. Rate is including ten years performance of guarantee bond to be given on

stamp paper. (No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of cement

admixed with properly water proofing compound conforming to IS -2645 and 10 mm thick

water proofing cement plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the

surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with 50% of

cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing cement

plaster in cement mortar 1:3 (1 cement ,3 coarse sand) admixed with proprietary water

proofing compound conforming to IS 2645 to required slope and treating similarly the

adjoining walls up to 200mm height incl. rouding of junction of walls.

C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement

plaster of mix 1:3(1 cement :3 coarse sand )admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

(E) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer In

Providing, Supplying and Fixing of 32MM (Total) Thick Flush Door Shutter with 1 mm

Thick Laminates on Both Side of Shutter (Laminates Shall be Durain, Archid, Aica, Royal

Crown, Royal Touch Brand only) Making / Construction of Flush Door is with Pine or

Southern Yellow Pine Filler and 2.5mm Core Veneer Both Side and 0.4mm Face Veneer

on Both Side with Lock rail on Centre. Flush Door Provide with Teak wood beading Patti Rupees Eight Thousand Four

42 (32mm X 12mm) on Peripheries of Flush Door with Matching Laminate Paint with Non 2.00 Sqmt 8410.19 Hundred Ten and Paisa

Teakwood Door Frame of 100mm × 60mm Prepare by VANIL UDHYOG Including Paint Nineteen Only

Matching with Laminates. Flush Door Shutter having 05 Years Warranty against Attach of

biological Agent like Termite, Borers, Decay, Fungi, and harmful Insects also Warranty

against Seasoning Related Issues like Crack, Bending, Twisting, Warping. Laminates On

shutter shall be Press by Cold Press Method.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any

damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 6 No of Hold

Fast (25mm X 5mm) & 3 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick,

required Screw & Nails per Frame and Fixing following S.S. Fixtures And Fastening. (1)

Aldrops 1 No, 250mm x 16mm & Tadi 1 No 250 mm x 12 mm (For Internal Door ), (2)

Door Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push Door Stopper 1 No & (4)

Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall be as Per approved Material

Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked

Providing and fixing 24 mm thick THREE LAYER RIGID PVC PLAIN DOOR shutter with

Frame made from co-extruded three- layer rigid PVC foam sheet (single Extruded) with

density not less than 600 kg/cbm outer layer 1 mm thick should be of rigid PVC with Rupees Four Thousand Five

density of not less than 1400 kg/cbm manufactured by an ISO 9001-2015 certified Hundred Two Only

company. Complete as per direction of Engineer-in-charge, manufacturer’s specification

Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR-

Rupees Two Hundred Six

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of

44 50.00 Rmt. 206.73 and Paisa Seventy Three

following dia. Nominal bore tube fitting and clamps including making good the wall,ceiling

and floor etc. complete. (B)20mm inside dia.

Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR-

Rupees Two Hundred Fifty

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of

45 40.00 Rmt. 251.31 One and Paisa Thirty One

following dia. Nominal bore tube fitting and clamps including making good the wall,ceiling

and floor etc. complete.(C) 25mm inside dia.

Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR-

Rupees Three Hundred Thirty

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of

46 42.00 Rmt. 334.89 Four and Paisa Eighty Nine

following dia. Nominal bore tube fitting and clamps including making good the wall,ceiling

and floor etc. complete.(D) 32mm inside dia..

Providing and fixing Alluminium section window having extruded Aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of Rupees One Thousand Eight

47 horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of 0.456 5.00 Sqmt 1807.10 Hundred Seven and Paisa

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ Ten Only

wt.of 0.456Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details including one mosquitoe jali shutter With Both Side Locking Arrangment for

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x

Rupees One Thousand One

38.10mm x 1.2mm (Jindal Section :20033,@Wt.0.593 kg per mt) with colour anodized

48 2.00 Sqmt 1163.92 Hundred Sixty Three and

alluminium frame for ventilation with 5mm thick transparent bronze colour tinted float

Paisa Ninety Two Only

glass as details etc complete for VENTILATION.

Providing, fabricating and fixing of M.S. grill/Gate of approved pattern fabricated from

M.S.flat, square bars, round bars, C-channel, box pipe as per detail Drawings. Rate is

inclusive of welding with grinding smooth surface, two coat of Oil paint and one coat of

Rupees Seventy Five and

49 yellow Zink chromate primer coat of approved brand only. Oil paint shall be Luxol Enamel 459.36 Kg. 75.10

paint of Berger Paint India Ltd. or Asian paint Apcolite premium gloss Enamel of Asian

paint or Dulux premium gloss enamel of Dulux paint Only. MS/Grill Gate Material Should

Be ISI Mark Only

Providing and fixing U.PVC/SWR Nahni Trap of the following nominal dia self cleaning

Rupees Five Hundred Eighty

50 design with top tile and strainer including cost of cutting and making good the wall and 21.00 Nos 580.47

and Paisa Fourty Seven Only

floors 100mm inlet and 50mm outlet including 150mm x 150mm stainless steel jali.

Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of

90mm Dia. Complete with Special Flings, Compressor type Fittings like G.I. Slotted Z patti

of 16 Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut Rupees Three Hundred

51 at every 1.50mt. vertical distance including All Labour Charges etc. complete including 66.70 Rmt. 323.15 Twenty Three and Paisa

making good the Ceilings, Floors and on terrace. Rain water pipe shall be 90 mm Dia. Fifteen Only

SWR horizontal pipe and vertical pipe and 90mm bend at the end near by Ground level.

Rate are Inclusive of all Necessary Fittings required for ALL FLOORS.(RA)

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring

75 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door,

Rupees Two Hundred Sixty

reducer, coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge

52 92.00 Rmt. 264.97 Four and Paisa Ninety Seven

(minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every

1.50mt. vertical distance including All Labour Charges etc. complete and making good

the Wall, Ceiling and Floor.(RA)

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring

110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with

Rupees Four Hundred Ninety

door, reducer, coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge

53 47.00 Rmt. 495.91 Five and Paisa Ninety One

(minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every

1.50mt. vertical distance including All Labour Charges etc. complete and making good the

Wall, Ceiling and Floor.

Rupees Sixteen and Paisa

54 Providing and fixing in position PVC COWL VENT to pipes. 75mm dia 8.00 Nos 16.47

Fourty Seven Only

Rupees Twenty Eight and

55 Providing and fixing in position PVC COWL VENT to pipes. 110mm dia 5.00 Nos 28.16

Paisa Sixteen Only

Painting two coats (excluding priming coat) on previously painted steel and other metal

Rupees Ninety Eight and

56 surface with enamel paint, brushing to give an even shade including cleaning the surface 174.00 Sqmt 98.93

Paisa Ninety Three Only

of all dirt, dust and other foreign matter.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Painting two coats (excluding priming coat) on previously painted wood surface with Rupees One Hundred

57 enamel paint, brushing to give an even shade including cleaning the surface of all dirt, 759.00 Sqmt 114.24 Fourteen and Paisa Twenty

dust and other foreign matter. Four Only

Providing & Fixing 15mm Two way Bib Tap with Wall Flange. Rate are inclusive of all

Rupees One Thousand Three

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

58 6.00 Nos 1309.39 Hundred Nine and Paisa

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Two

Thirty Nine Only

way Bib Tap Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Rupees Nine Hundred Ninety

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Bib and Paisa Sixty One Only

Tap Shall be as per the Approved Make List of GSPHCL.

Providing and fixing 600mm x 450mm bevelled edge Mirror or superior glass mounted on

Rupees Eight Hundred Fifty

60 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screw 6.00 Nos 850.90

and Paisa Ninety Only

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or

S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine Rupees One Thousand Six

61 sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern 5.00 Nos 1631.83 Hundred Thirty One and

:(i) in white colour Also plastic seat and cover for wash down water closer with C.P. brass Paisa Eighty Three Only

hinges and rubber buffers. (B) White plastic seal and cover.

Providing and fixing water closet squatting pan (Orissa type W.C. pan) first quality with

Rupees One Thousand Two

UPVC S trap of 100 mm including jointing the trap with UPVC Pipe (size 580mm X

62 2.00 Nos 1207.07 Hundred Seven and Paisa

mm in vitreous china white colour).Rate also includes making holes in RCC slab / Beam

and fixing the trap in hanging position by M.S. clamps of required size fitted in ceiling

Providing & Fixing 25mm Concealed Heavy Duty Stop Cock with Exposed Part & Other

Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of all matreials, Labour & Rupees One Thousand Two

63 Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the 5.00 Nos 1233.57 Hundred Thirty Three and

Instruction of Engineer In charge. The Model & Make of Concealed Heavy Stop Cock Paisa Fifty Seven Only

Shall be as per the Approved Make List of GSPHCL.

Providing and fixing wash basin with single hole for pillar tap with C.I or M.S. brackets

painted white including cutting holes and making good the same including fitting (A)

Rupees One Thousand Three

Vitreous china : (II) Flat back Wash basin 550mm x 400mm size in white colour including

64 4.00 Nos 1344.34 Hundred Fourty Four and

providing and fixing C.P. Brass waste coupling 32 mm dia and C.P. brass pillar tap

Paisa Thirty Four Only

capstan head of 15 mm dia. with complete including PVC connection pipe from stop cock

to piller tap and 32 mm CP brass bottle trap.

Rupees Two Thousand Three

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE

65 4.00 Nos 2302.33 Hundred Two and Paisa

Thirty Three Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour

& Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per Rupees Five Hundred Sixty

the Instruction of Engineer In charge. Materials used for the above items Must be list Five and Paisa Fifty One Only

approved by G.S.P.H.C.L.

Providing and fixing Urinal or approved quality including conecting the Urinal with waste Rupees One Thousand Sixty

67 pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm 4.00 Nos 1064.22 Four and Paisa Twenty Two

x260mm x 350mm. Only

Celling painting (two coats) with plastic emulsion paint on undecorated wall surface to

give an even shade including throughly brushing the surface free from mortar droppings

Rupees One Hundred Ninety

and other foreign matter and sand papered smooth With Applying two coats of Fine Putty

68 723.00 Sqmt 191.73 One and Paisa Seventy

& One coats of primer on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand

papered smooth. paint, primer and putty shall be as per approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall surface to give

an even shade including throughly brushing the surface free from mortar droppings and

Rupees One Hundred Eighty

other foreign matter and sand papered smooth With Applying two coats of Fine Putty One

69 1620.00 Sqmt 181.42 One and Paisa Fourty Two

Coat of Primer on new wall surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and sand papered

smooth.paint, primer and putty shall be as per approved make list of GSPHCL

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over

and above applying one coat of primer to give an required shape even shade after Rupees One Hundred Fifty

70 throughly Brushing This surface to remove all Dirt and remains of loose poweder material 3629.00 Sqmt 153.35 Three and Paisa Thirty Five

etc. complete. Primer shall be exterior weather coat and Paint shall be Appex Weather Only

Emulsion Only Paint and primer shall be as per approved make list of GSPHCL

Providing Corrugated JSW sheet roofing fixed with Galvanized J or L hooks ,bolts Rupees One Thousand

71 andnuts 8mm dia with bitumen and GI limpet washers etc comp. Colour coated 0.6mm 27.00 Sqmt 1015.76 Fifteen and Paisa Seventy

Roofing sheet as per enginneer charges. Six Only

Providing & fixing 3mm acrylic sheet of size 180 x 90 cm with necessary screws, plugs etc

Rupees One Thousand Five

72 for any Number, Writing Letter/ Matter in 10cm size of radium adhesive patty or directed 1.00 Nos. 1500.00

by engineer in charge.

Rupees Two Hundred Fourty

Providing a I.S.I. mark 7 levers three key brass pad lock of NAVATAL (Godrej) make

73 3.00 Nos. 243.64 Three and Paisa Sixty Four

65mm dia on completion of project.

74 Credit Vaule for fully pannelled shutter and removed from site and clean site. 8.00 Sqm -200.00 Rupees Two Hundred Only -1600.00

Total Amount (A) =

Total Amount (A) =

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(B) ELECTRICAL WORKS

Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper

PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for

earth continuity in FIA approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected on Brick

Wall / slab along with continuous G.I. fish wire to draw wires and laid in approved manner

Rupees Four Hundred

75 [a] and complete with approved make 5/6 Amp. ISI make modular type switch and 5.00 Point 425.00

Twenty Five Only

accessories mounted in 20 G. G.I. company fabricated metallic / PVC / Acrylic box

covered with appropriate front plate modules erected on the wall / ceiling with necessary

modular lamp holder / modular ceiling rose / HD Connector (make & model approved by

EIC and matching colur with switches accessories) as directed for Open wiring. Light

[Length of point wiring must not increase than 10 mtr. For that necessary switch board

and their location must be finalised before execution by agency otherwise payment will

not be done for extra long point. For future extention, if required, agency has to erect one

higher size box as per instruction of EIC] [conductor resistance should be as per

For Fan Point with 6A Modular type switch and hum free EME step type electronic fan Rupees Six Hundred Twelve

regulator Cat.-II Only

Rupees Two Hundred Thirty

75 [c] For Loop on switch board (with 5 pin socket & switch 6 Amp.) Cat.-II 1.00 Point 234.00

Providing and erecting Medium Class FIA approved and ISI mark white colour

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

76 fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along 20.00 Mtr. 24.00 Rupees Twenty Four Only

with continuous fish wire to draw mains with necessary fittings and junction boxes for

following dia. (a) 20 mm. dia.

Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with

FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with plastering by

77 cement mortar & finishing the surface to match the wall / ceiling complete with FRLS PVC 20.00 Mtr. 62.00 Rupees Sixty Two Only

insulated wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS

copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. [conductor resistance should be as

Providing and erecting following type of Modular Type Accessories mounted with 20 G

company fabricated metalic/PVC box, single mounting base frame covered with textured / Rupees One Hundred Twenty

metallic front plate, modules erected with necessary connection. As desired by Engineer Four Only

in charge. 6 Amp. SP one way switch, Cat.-II

Rupees One Hundred Thirty

78 [b] 16 Amp. SP one way switch Cat II 30.00 Each 130.00

Rupees One Hundred Twenty

78 [c] 6A 5 pin plug Socket Cat II 70.00 Each 124.00

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Rupees One Hundred Thirty

78 [d] 6/16Amp. Universal socket 30.00 Each 139.00

Rupees Three Hundred Thirty

78 [e] Electronic hum Free 5 steps EME Fan regulator Cat II 40.00 Each 338.00

78 [f] Blank Plate Cat II 125.00 Each 16.00 Rupees Sixteen Only

78 [g] Bakelite ceiling, rose 75.00 Each 18.00 Rupees Eighteen Only

78 [h] Bakelite lamp holder 50.00 Each 22.00 Rupees Twenty Two Only

Rupees One Hundred Thirty

78 [i] Modem Jack for Computer Open RJ-45. Cat.-II 23.00 Each 139.00

Rupees One Hundred Thirty

78 [j] Two Pin/ RJ-11 Telephone Socket One Gang Cat II 12.00 Each 130.00

Providing & erecting Switch board for Computer or electric apparatus consisting of

following items in single board erected on Metal/PVC board with 3 mm thick PC

Rupees One Thousand

79 (Polycarbonet) / Acrylic sheet erected as directed. 2 no. 6/16 Amp. universal Socket, 2 23.00 Each 1023.00

Twenty Three Only

nos. 16 Amp. indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For

Computer power Supply board. Cat.-III.

Providing & fixing 20mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary Rupees Thirty and Paisa

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Ninety Five Only

Providing & Erecting 2.0 mtr. long Earthing system by making minimum bore of 225 mm

dia. in soft soil. Suitable for doing pipe-in-pipe technology earthing. Earthing electric rod

must be made from Corrosion free hot dip galvanizing pipes having following

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI mark of Reputed

Brand, Inner pipe: - 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand. Terminal

Size: 70 mm X 100 mm length, Terminal should be made from inner pipe for that pipe Rupees Seven Thousand

must be pressed and gave rectangular shape so its work as a terminal. The hot deep Twenty Five Only

galvanising must be done after above process. Galvanised thickness must be minimum

75 micron anywhere. SS Nut bolt:- 2 nos. with washer suitable for 14 mm dia. hole must

be provided at terminal. Total minimum Weight (approx.) of earth electrode with inside

conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphur content:- <2%

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long

time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

mm depth and Cover should be heavy duty cast iron with required size of 300 mm X

mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to

submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for

one year. Earthing must be done in the presence of A.E. (GSPHCL)]

For above earthing additional charges for boring in hard rock soil (by breaker) & filling Rupees Two Hundred

soft soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Seventy Six Only

Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of wattage

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be

made from Aluminum exttusion having enough strength (Sample must be approved by

EIC) With Polycarbonate diffuser With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 240 VAC, 50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp. Rupees Three Hundred

(5) Power Factor : Min.0.90 Seventy Only

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) Approval will be given strictly subject to item

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate Rupees One Hundred

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps Eleven Only

integral type, with PC diffuser suitable Lamp holder.

Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 watt

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen

Rupees Seven Hundred

85 output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 8.00 Each 780.00

to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-

I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2)

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption:

maximum 53W, (5) RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body:

Top & Bottom should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Rupees One Thousand Nine

Condenser: min 1.5 MFD (15% Tolerance) as per is 1709-1984, Aluminium body Hundred Twenty Nine Only

premium quality, Branded make, (14) Down road: up to 1.0 mtr as per site requirment,

(15) Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment,

(17) No vibration and noise due to mechanical parts. (Agency has to erect safey wire with

ceiling fan and checked with EIC) (OEM has to approved model as per tender

specification and tested at ERDA) (Necessary test reports should be submitted strictly at

the time of approval. Sample approved by EIC subject to above specification only)

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with

87 39.00 Each 43.00 Rupees Fourty Three Only

Making the site as original.

Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars up to

Rupees One Hundred Twenty

88 50 mm Length each side & piereced through 18 Gauge G.I Box having 125 mm dia depth 1.00 Each 125.00

of 75 mm complete erected concealed in ceiling with necessary modular plate / sheet.

Supplying & erecting approved make low noise Decorative exhaust fan having size

Rupees One Thousand Six

89 150/200 mm with 1350 RPM with round / square frame ABS/metalic body with Grill / 5.00 Each 1687.00

Hundred Eighty Seven Only

inbuilt lowers. (make and model approved by EIC Only strictly as per specification)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 GMS

sheet dust & vermin proof having hinged door with rubber gasket and necessary busbar

supports with copper busbar having current density not more than 1.6 amp/sqmm (Rated

current per Cross Section area) duly wired with colour insulating tape for phase sequence, Rupees Four Thousand

90 three phase & neutral Each equal & one meter long suitable for following current capacity 0.50 Mtr. 4378.00 Three Hundred Seventy Eight

with necessary painting mounted on wall or pedestal frame of required size with Only

necessary incoming and outgoing connections with proper size of copper strip/wire with

lugs as directed. Suitable for 100 Amp. capacity [make and model approved by EIC strictly

as per tender specification]

Providing ad erecting approved make single phase Double Door metal clad D.B. as per

relevant indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of company

fabricated sheet box with powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. MCBDB Door, Back side and Body of Rupees Four Thousand Nine

91 MCBDB must be made of 1.2 mm thick CRCA Sheet. Manufacturer must be provided (1) 9.00 Each 4906.00

Hundred Six Only

IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven

tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link

with isolation & Protecting Cover for 240 Volts on surface / recess complete with loose

wire box, terminal connectors for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks and internal connection,

tinned coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 12 Way MCBDB:

Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988

having sensitivity of 30 mA and breaking capacity of 10 KA), 1 no. MCB 40 Amp. double

pole switch (C curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P.

MCB of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp:-

3 Nos., 16 Amp:- 3 Nos. & 25 Amp: 2 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per site requirement

and instructions given by EIC on site. Font / number size given by EIC on site as per

Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve)

Rupees Three Hundred

92 having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having 4.00 Each 327.00

Twenty Seven Only

following capacity. For 40 Amp. DP

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & erecting 240 V MCB Double pole switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS:8828 with same company metal box with Rupees Five Hundred Two

earthing terminal having following capacity with necessary Qtr. numbering / marking with Only

oil Paint by painter. For 40 Amp. DP

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

Rupees Six Hundred Sixty

94 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. 6.00 Each 662.00

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet

steel duly powder coated with gasket, dust & vermin proof bakelite shield two earthing

Rupees Two Hundred

95 [a] terminals for following type of RCCB, RCCB + MCB with necessary numbering / marking 7.00 Each 272.00

Seventy Two Only

with oil Paint by painter. [a] For 2 pole [Box must be of same company as MCB, ELCB

Rupees Four Hundred Fourty

95 [b] For 4 pole [Box must be of same company as MCB, ELCB used] 8.00 Each 442.00

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on

existing 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP

SWITCH and energy meter (contractor shall make approved drawing of Bakelite sheet To Rupees Two Thousand Two

arrange required No. of Energy meter & ICDP/MCB switch-busbar etc. as per Actual Hundred Eighty Nine Only

space available in electrical room at site)

Providing, erecting, Fabricating the M.S. structure as per requirement of site as per

structure design Including proper size approved by EIC of M.S. angles, flats, bars,

square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac make premium quality oil Rupees Seventy Five and

paint and true care red oxide metal primer,asian paint make with erection on site as per Paisa Ten Only

direction of engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to

98 4.00 Each 69.00 Rupees Sixty Nine Only

be erected as per I.S.

Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

99 [a] 227 erected in existing pipe of following size (Specifically for control panel, relays, power 600.00 Mtr. 17.00 Rupees Seventeen Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. For One wire 1.50 sq. mm.

99 [b] For One wire 2.50 sq. mm. 300.00 Mtr. 27.00 Rupees Twenty Seven Only

99 [c] For One wire 4.00 sq. mm. 100.00 Mtr. 37.00 Rupees Thirty Seven Only

99 [d] For One wire 6.00 sq. mm. 200.00 Mtr. 56.00 Rupees Fifty Six Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

99 [e] For One wire 10.00 sq. mm. 150.00 Mtr. 91.00 Rupees Ninety One Only

Rupees One Hundred Fourty

For One wire 16.00 sq. mm. 30.00 Mtr. 141.00

Supplying and making Coil type earthing, coil made from 8 SWG galvanised iron wire with

50 mm OD and 50 turns (length of turns approx. 200 mm) and having additional Rupees Three Hundred Sixty

100 continuous streight length of 3.00 mtr at open end and should be connected to earthing 9.00 Each 368.66 Eight and Paisa Sixty Six

bolt and burried in 1.5 mtr deep specially prepared earth pit complete with salt and Only

charcoal/coke as required for coil type earthing.(Approx weight of coil 1.0 to 1.1 Kgs)

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E), DIN rail

Rupees Eight Hundred Ninety

101 for mounting mob & hinged doors as per requirement having locking arrangements with 22.00 Each 890.00

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (A) 300mm x 200mm x 100mm

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and

length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for

terrace as per instruction of EIC or wall bracket as per instruction of EIC having nuts and

102 bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with suitable rise Rupees Four Hundred Eighty

[a] as per site condition and suitable welded stiffner reducer and nipple with check nut Seven Only

complete painted with one coat of yellow zinc and two coats of alluminium paint for Single

arm bracket suitable for pole or terrace as per design given by EIC (a) For single arm

bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont,

Transrail, Ambica Only) (Test certificate to be submitted)

102 For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Rupees Six Hundred

[b] Bajaj, Valmont, Transrail, Ambica Only) (Test certificate to be submitted) Sixteen Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire

with total consumption of Max. 45 W with single piece die cast aluminium housing, high

power LED shall be mounted on high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen

Rupees Three Thousand Five

103 Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light 26.00 Each 3512.00

distribution. The Fixture Should be able to be Pole Mounted and also bracket mounted, Hundred Twelve Only

provided with high quality driver for protection against high and low Voltage cut Off,

opertional for high amibient and high humid envirnoments, THD of driver should be less

than 10% and P.F > 0.95. Also the Fixture should meet the following technical criterias

Oprating range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total lumens not

less then 4950, CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity level at

least 4 KV integral and 10 KV non integral

The Separate Potted driver should have over current, over voltage protection, short circuit

protection so that the fixture recovers once the fault is removed. In addition to the above

product should be operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. (Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee for complete Fixture)

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS:

16205 (part 24) 2018)) with minimum load required of 450N capacity with anti rodent and

ultra violet material properties with necessary connecting accessories of same material Rupees One Hundred

at required depth to be laid 90 cms. under ground for laying of cable below ground / road Seventeen Only

surface for enclosing cable and back filling the same to make ground as per original. (A)

For Outer dia. 50 mm and Inner dia. 38 mm.) (Test Certificate to be Submitted)

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage Rupees Two Hundred Sixty

1.0 mm thick cable clamp or in existing DWC pipe underground or road crossing or floor. Nine Only

For 4 core x 2.5 sq.mm Copper Armourd cable with all require accessories

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage Rupees Three Hundred Sixty

1.0 mm thick cable clamp or in existing DWC pipe underground or road crossing or floor. One Only

For 4 core x 4 sq.mm.

Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & connected to switchgear

107 299.00 Each 8.00 Rupees Eight Only

terminals with brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & fixing double compressed heavy duty flange type brass cable gland with

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating

108 54.00 Each 43.00 Rupees Fourty Three Only

tape etc. For following size cables. For 2 to 4 core x 2.5/4.0/6.0 Sq. mm (Sigma, MCI,

Comet Make Only)

Supplying & Erecting following size of Light duty “A” Class G.I. Pipe & erecting as Rupees One Hundred

directed by Engineer-in-charge. For 25 mm dia. Seventy One Only

Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked

110 copper wires of following size to be erected as directed. 3 core x 1.5 sq.mm. PVC 140.00 Mtr. 46.00 Rupees Fourty Six Only

insulated round copper wire ISI mark.

Providing & Erecting Universal Astro 5 KVA St.light Time switch intelligent streetlight Rupees Twelve Thousand

111 control system insu with weather proof box for outdoor application. (Specification attached 2.00 Each 12895.00 Eight Hundred Ninety Five

separately) Only

Brecking existing C.C Foundation upto 0.5 mtr level and make the new C.C Foundation &

70% PCC from bottom including excavation for the pole of size 45 x 45 x 100 cm. Deep in Rupees Nine Hundred Fifty

below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground Only

level with necessary curing and finishing in approved manner. (for 4 & 6 mtr pole)

Painting of Streetlight pole with bracket complete with primer with two coats of Aluminium Rupees Two Hundred Sixty

paint for following size of pole Up to 6 Mtr Three Only

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding

Rupees Four Hundred Eighty

114 power supply by making up to following size of holes at both ends complete. (A) Up to 100 20.00 Mtr. 488.00

Providing and erecting open well type horizontal submersible mono block pump set with

cast iron body having following specification. For 3 phase open well horizontal mono

block pump set suitable for 200 LPM discharge at required head as per plumbing length

and vertical & Horizontal head. Agency has to submit the details calculation of head to

GSPHCL and get approval of make and model of pump having tender specification with

TDS & GA drawing.

Suitable for 50 mm dia delivery pipe with 10 mtr. necessary Size 3 Core Flat copper

flexible cable. (Body: Cast iron / Winding : Copper / stator : Copper / rotor : Copper / shaft Rupees Ten Thousand Six

: SS / Carbon material test certificate from manufacture shall be submitted). Hundred Twenty Eight Only

The model of the pump with respect to head and discharge will be approved by EIC.

Pump should have following specifications:

(1) Minimum 10 mtr. Cu. flat cable of suitable size must be provided with pump.

(2) Pump shall be installed as per manufacturer foundation/erection drawing or as per IS

(Body full C.I., stator winding- copper, rotor- copper, shaft- SS / carbon material, motor-

Energy efficiency)

Lowering of existing submercible motor pump set complete with required No. and size of

pipes by means of proper chain pulley block and pipe wrenches. Job includes stacking of Rupees Eight Hundred Fourty

pipes cronologically after the checking of threads. For open well horizontal submercible Eight Only

pump set for sump well. (i) 1.0 HP to 5.0 HP.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . Pipe &

Rupees Two Hundred Sixty

117 erecting as directed by Engineer-in-charge with necessary plumbing as desired. [e] 50 20.00 Mtr. 260.00

Supplying and erecting ISI maked C.I. Sluice valve at position with necessary material like

Rupees Seven Hundred

118 flange, packing, nuts, washers etc. for following size of pipe diameter. [e] 50 mm dia. 1.00 Each 796.00

Ninety Six Only

Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI marked with Rupees One Thousand Ten

packing, flange, nuts and bolts etc.suitable for following pipe size. [b] For 50 mm dia. Only

Supplying & erecting approved make motor control cubical panel (Direct-on- line) made

from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors

and locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty)

main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload

Rupees Seven Thousand Six

120 relay, Automatic water level controller, Ammeter, Voltmeter each with two way selector 2.00 Each 7646.00

Hundred Fourty Six Only

switch incoming, wires duly socket crimped, main contactor & overload relay, start - stop

push buttons, to be erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L&T, Siemens or BCH make only. [a] DOL up to

Providing and erecting Two way Centre off Four pole MCB Change Over Switch for motor

& inductive Load (C curve) having 10 KA breaking capacity & confirms to IS:13947-3 / IEC Rupees Eight Hundred Fourty

60947-3 with suitable size of interconnecting PVC copper wire as per IS having following Four Only

capacity. (a) For 25 Amp. FP

Supplying and erecting Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable

kitkat fuse / MCB to be . erected on polished wooden board inside the box with

Rupees Two Hundred Thirty

122 hinged/sliding door with rubber rings and erected on pole with suitable pole clamp, all duly 1.00 Each 232.00

painted with one coat of red oxide and two coats of paints. (Cost of Fuse / MCB shall be

taken extra) [Provision for motors cable joints near sump]

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Rupees One Hundred Three

Submersible copper cable approved make of following Size. For 3 Core x 2.5 Sq. mm. Only

Providing & fixing water proof straight joint in PVC insulated flat flexible copper cable by

Rupees One Hundred Eighty

124 using insulated material water proofing material and making the joint complete. UP to 10 2.00 Each 188.00

Total Electrical (B) =

Total Amount (A+B) =

Total Amount (A+B) =

I/c Executive Engineer

Signature of the contractor. G.S.Police.Housing Corp.Ltd.