Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.1 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹2.2 L+₹11,488.39 (5.59%)Rejected-AOC | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | MAHIN BASHEER L1 | HARIS K S L2 |
|---|---|---|---|---|---|
| 1.00Completion | |||||
| 1.00 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 2.1 | cum | 2,060 ₹4,326 Lowest | 2,200 ₹4,620 |
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 61.2 | cum | 250 ₹15,300 Lowest | 260 ₹15,912 |
| 1.00 | 13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster | 204.9 | sqm | 470 ₹96,303 Lowest | 500 ₹1,02,450 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 36.72 | sqm | 816 ₹29,963.52 Lowest | 850 ₹31,212 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 12.02 | kg | 560 ₹6,733.44 Lowest | 600 ₹7,214.4 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1.98 | sqm | 1,235 ₹2,445.3 Lowest | 1,300 ₹2,574 |
| 1.01 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 1,000 | Litre | 12 ₹12,000 Lowest | 13 ₹13,000 |
| 1.01 | 26.50.2: Providing and fixing in position factory made non asbestos fibre reinforced
aerated cement sandwich wall/roof/floor light weight solid core panels made
of light weight cement concrete core composed of OPC cement, pulverized
flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration
agent in a preset mould. The outer face on both sides of the panels will be non
asbestos fibre cement board confirming to IS 14862:2000. These solid wall panels
are installed using Galvanized iron steel tracks/C channel of 1mm thick of
required sizes as recommended by manufacturer's and fixed to floor and RCC
soffit in plumb to each other with steel screw/fasteners. The panel shall be
fixed vertically with tongue & groove joint with cement based polymer modified
jointing compound. The exposed surface finished with fibre mesh/glass fibre
tape with polymer based jointing compound having superior flexibility. PanelsRCC depending upon the design. All the operation shall be completed in all
respect as per drawings, Manufacturers specifications and under the overall
direction of Engineer-in-Charge (Cost of all the material is included except
"tracks/C channel" which will be paid separately).Non load bearing panels 75mm thick of required size (minimum 5mm thick
fibre cement board) | 6.57 | sqm | 1,910 ₹12,548.7 Lowest | 2,000 ₹13,140 |
| 1.01 | OD348966/2025-2026:Providing and fixing the aluminum doors, windows, ventilator shutters and partitions, etc. with
EPDM rubber/neoprene gasket, etc. complete as per the architectural drawings and the
directions of the Engineer - in -Charge. ( Cost of aluminum snap beading shall be paid in
essential item): With Aluminium Composite Panel panes of 3.0 mm thickness | 2.8 | sqm | 2,190 ₹6,132 Lowest | 2,300 ₹6,440 |
Tender Value
₹2.1 L
EMD Value
₹5,294
Closing Date
23 Oct 2025, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer
LSGD Sub division Thodupuzha
Thodupuzha BP 25-26-Pr no 121/26 Stair room completion and allied works
2025_LSGD_810242_1
121/AE/LSGD/TDPA/2025-26
Open Tender
Civil Works - Buildings
Item Rate
365 days
Kolani
Please refer Tender documents.
6 documents required · 6 mandatory
₹555
Yes
₹5,294
Yes
17 Oct 2026
16 Oct 2025
24 Oct 2025
16 Oct 2025
23 Oct 2025
16 Oct 2025
Amount
Completion
15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
26.50.2: Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wall/roof/floor light weight solid core panels made of light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent in a preset mould. The outer face on both sides of the panels will be non asbestos fibre cement board confirming to IS 14862:2000. These solid wall panels are installed using Galvanized iron steel tracks/C channel of 1mm thick of required sizes as recommended by manufacturer's and fixed to floor and RCC soffit in plumb to each other with steel screw/fasteners. The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibre mesh/glass fibre tape with polymer based jointing compound having superior flexibility. PanelsRCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge (Cost of all the material is included except "tracks/C channel" which will be paid separately).Non load bearing panels 75mm thick of required size (minimum 5mm thick fibre cement board)
OD348966/2025-2026:Providing and fixing the aluminum doors, windows, ventilator shutters and partitions, etc. with EPDM rubber/neoprene gasket, etc. complete as per the architectural drawings and the directions of the Engineer - in -Charge. ( Cost of aluminum snap beading shall be paid in essential item): With Aluminium Composite Panel panes of 3.0 mm thickness
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
HARIS K S (BID ID -2406951)
Bidder Name
MAHIN BASHEER
HARIS K S
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
sbd.pdf
Tender Documents • 1.66 MB
BOQ_1352143.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .