Renovation of Electrical Installation in Purathur Community Health centre

Amount

Supplly and wiring point according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq.mm FRLS PVC insulted stranded single core copper conductor cable 650V grade,including providing switch board main and contionous earthing with No.14 SWG bare copper,required quantity of copper earth socket,brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes,modular type front plates(white) etc.up to and including 6A modular type SP switches and making good the surface of wall,colour washing etc.complete.All the terminations in the swich boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc as required.(RoHS compliant modular accessories).single control light point with 6A,plate ceiling rose -Short point.

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitabl;y and with 1.00 sq mm FRLS PVC insulted stranded single core copper conductor cable 650V grade,including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket,brass bolt and nut crimping/soldering etc complete with suitable size modular type metal switch boxes,modular typr SP switches and making good the surface of wall,colour washing etc.complete.All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc as required.(RoHS complaint modular accessories).Single control light point without ceiling rose-Short point.

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitabl;y and with 1.00 sq mm FRLS PVC insulted stranded single core copper conductor cable 650V grade,including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket,brass bolt and nut crimping/soldering etc complete with suitable size modular type metal switch boxes,modular typr SP switches and making good the surface of wall,colour washing etc.complete.All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc as required.(RoHS complaint modular accessories).Single control light point without ceiling fan point with 6 A, 3 plate ceiling rose nd with socket size steped electronic regulator.-short point.

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00 sq mm FRLS PVC insulted stranded single core copper conductor cable 650V grade,including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket,brass bolt and nut crimping/soldering etc complete with suitable size modular type metal switch boxes,modular typr SP switches and making good the surface of wall,colour washing etc.complete.All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc as required.(RoHS complaint modular accessories).cell bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end-Short point

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00 sq mm FRLS PVC insulted stranded single core copper conductor cable 650V grade,including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket,brass bolt and nut crimping/soldering etc complete with suitable size modular type metal switch boxes,modular typr SP switches and making good the surface of wall,colour washing etc.complete.All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc as required.(RoHS complaint modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A,switch in the same switch board as that of light points.

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00 sq mm FRLS PVC insulted stranded single core copper conductor cable 650V grade,including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket,brass bolt and nut crimping/soldering etc complete with suitable size modular type metal switch boxes,modular typr SP switches and making good the surface of wall,colour washing etc.complete.All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc as required.(RoHS complaint modular accessories).Independent plug-Short point.

Supply and installation of light fittings on TW round block.Supply,conveyance installation testing and commisioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc.directly on wall or ceiling with PVC round block neatly painted to suite the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200mm IX20W LED Lamp with box type fixture.

Supplying and installation of light fittings on 'C/U' shaped flat iron bracket Supply,conveyance,installation,testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc.directly on wall using 2 nos.'C/U' bracket made from 20x3 mm MS flat,painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 copre copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc.as required.1200mm IX20W LED Lamp with box type fixture.

Supplying and fixing recess mounted 15W LED down lighter ABS plastic with pc diffuser luminaire LED light source SMD,IP 40, operating temperature : -0^o C to +40^o C operating voltage range: 100-300 V average life 40000 hours, light efficiency 100-110 LM/W power consumption 15W +-5,power factor 0.95, rated luminious flex 1140 Lm and viewing angle of 120^o to ensure CRI >- 80 (Havells/Phillips/Bajaj/osram/K LIte/lucker or similler make) on false ceiling and giving connection.

Supplying and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated,heat resistant prismatic glass cover with 9W LED bulb to wall / Ceiling including giving connections with required length of 16/0.20mm PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.

Supply,fabrication,conveyance and fixing the following sizes of B class GI pipe bent to shape/cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size,painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer,making good the damages,colour washing etc as required.25mm dia with HG company fabricated clamps.

Supply conveyance,installation,testing and commissioning of 36/40 W LED street light output greater than 105 lumen/W 4000-6000 K with IP 66 protection LED chip make CREE/Lumilled/Nichea with power factor greater than 0.95 at full load,internal surge protection up to 8 KV, and aluminium pressure die-cast powder coated housing, acrylic cover complete with THD less than 10%,power factor greater than 0.98,RoHS compliant,duly wired up for use on 230 V AC supply.Driver compartment should be saperatly accessible for maintenance (LM 79 ang 80 certificates from NABL accredited third party lab to be produced mentioning chip manufacture).

Supplying and fixing PVC batten /angle holder including connection etc.as required.

Supply and fixing the 200 plastic shade in the existing front fitting and giving necessary connections as required.

Supplying and fixing 5W LED bulb as required.

Supplying and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

Supplying and installation of suitable size MS belt fan clamp fabricated from flat iron 40x6 mm ,150mm long x2 nos. with MS rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.

Supply,conveyance,installation,testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator,wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc.as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod,canopies,shackles and blades and resistance type requlator working on 230V/240V single phase A/C.

Supply,conveyance,installation,testing and commissioning of 400mm sweep wall mounting fans.

.Supply,conveyance,installation,testing and commissioning of 250mm sweep light duty exhaust fan in plastic body with self opening in the existing opening,fixing necessary anchor bolts / bolt and nuts etc.as required including giving connections with the supplied wire along with the exhaust fan.

Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

Supply and fixing the following types of superior quality 250V AC call bell on existing MS box and giving connections with required length of 3 core, 16/0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring,earthing the MS box and making good the surface as required. ding doing bell.

Supply and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc. as required. 1 or 2 module (75mmx75mm).

Supply and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc. as required. 3 module(100mmx75mm).

Supply and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc. as required. 4 module(125mmx75mm).

Supply and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc. as required. 8 module(125mmx125mm).

Supply and fixing following modular base and cover plate on existing modular metal boxes etc. as required. 1 or 2 module.

Supply and fixing following modular base and cover plate on existing modular metal boxes etc. as required. 3 module.

Supply and fixing following modular base and cover plate on existing modular metal boxes etc. as required. 4 module.

Supply and fixing following modular base and cover plate on existing modular metal boxes etc. as required. 8 module.

Supply and fixing following modular switch and accessories in the existing front plates and giving necessary connections as required (RoHS complaint). 32A DP switch with indicator.

Supply and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc.as required. 15/16 amp switch.

Supply and fixing following piano type switch/socket on the existing switch box / cover including connections etc.as required. 6 pin 15/16 amp socket outlet.

Supply and fixing following modular switch and accessories in the existing front plates and giving necessary connections as required (RoHS complaint). 6A universal socket.

Supply and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc.as required. 5/6 amps switch.

Supply and fixing following modular switch and accessories in the existing front plates and giving necessary connections as required (RoHS complaint). 25A 3 pin plug top with indicator.

Supply and fixing following 20 amps 415V,TPN industrial type,socket outlet,with 4 pole and earth,metal enclosed plug top along with 20 amps 'C' curve,SP, MCB, in sheet steel enclosure, on surface or in recess,withy chained metal cover for the socket outlet and complete with connections,testing and commissioning etc.as required.

Supply and fixing 20 amps 415V,TPN industrial type,socket outlet,wityh 4 pole and earth,metal enclosed plug top along with 20 amps 'C' curve,TPMCB, in sheet enclosure,on surface or in recess,withy chained metal cover for the socket outlet and complete with connections,testing and commissionin etc. as required.

Supply and fixing following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm

Supply and fixing following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm

Supply and drawing 650/1100V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface/ recess conduite as required including giving necessary connections of the following sizes. 1.00 sq.mm 2 run.

Supply and drawing 650/1100V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface/ recess conduite as required including giving necessary connections of the following sizes. 1.50 sq.mm 2 run.

Supply and drawing 650/1100V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface/ recess conduite as required including giving necessary connections of the following sizes. 2.50 sq.mm 2 run.

Supply and drawing 650/1100V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface/ recess conduite as required including giving necessary connections of the following sizes. 2.50 sq.mm 4 run.

Supply and drawing 650/1100V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface/ recess conduite as required including giving necessary connections of the following sizes. 4.00 sq.mm 2 run.

Supply and drawing 650/1100V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface/ recess conduite as required including giving necessary connections of the following sizes.4.00 sq.mm 4 run.

Supply and installation of sheet steel,phosphatised and painted dust and vermin proof enclosure of MCB DB including copper/brass bus bar,neutral link,earth bus and DIN rail suitable for fixing MCB/ isolator etc.fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall making good the damages,colour washing etc. as required. 6 way (8+12)- double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/TP MCB as outgoing (IP 42/43).

Supply and installation of sheet steel,phosphatised and painted dust and vermin proof enclosure of MCB DB including copper/brass bus bar,neutral link,earth bus and DIN rail suitable for fixing MCB/ isolator etc.fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall making good the damages,colour washing etc. as required. 4 way (8+12) - double cover TPN vertical DB with provision for fixing MCB/ isolator/RCCB/ RCBO as incomer and SP/TP MCB as outgoing (IP 42/43).

Supply and installation of sheet steel,phosphatised and painted dust and vermin proof enclosure of MCB DB including copper/brass bus bar,neutral link,earth bus and DIN rail suitable for fixing MCB/ isolator etc.fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall making good the damages,colour washing etc. as required. 4 way (8+12 ) - three phase double cover (IP 42/43).

Supply and fixing following way single pole and neutral,sheet steel, MCB distribution board, 240V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,powder painted including earthing etc. as required.(But without MCBIRCCB / Isolator 12 way,double door.

Supply, conveyance and fixing the following types and current rated control gears and switch gears conforming to IS 13947 suitable for 440V,50Hz, AC supply in the existing panel assembly as required. 16A-100A, 16KA(Ics = 100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80-100% with thermal magnetic release having adjustable QL.

Supply and fixing following rating,four pole,415V,isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps.

Supply and fixing following rating,four pole,415V,isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.

Supply and fixing following rating,four pole,250V,isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.

Supply and fixing following rating,four pole (three phase and neutral), ,415V,residual current cercuit breaker (RCCB), having a sensitivity current upto 300 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps.

Supply and fixing following rating,four pole (three phase and neutral), ,415V,residual current cercuit breaker (RCCB), having a sensitivity current upto 300 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.

Supply and fixing following rating,four pole (three phase and neutral), ,240V,residual current cercuit breaker (RCCB), having a sensitivity current upto 300 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.

Supply and fixing 5 amps to 32 amps rating,240/415V 'C' curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.triple pole.

Supply and fixing 40 amps to 63 amps rating,240/415V 'C' curve triple pole,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Supply and fixing 5 amps to 32 amps rating,240/415V 'c' curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.single pole.

Supply and fixing 5 amps to 32 amps rating,240/415V 'c' curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.double pole.

Supply,laying and clamping of 1 no.PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms, making good the damages,colour washing etc. as required. 4 core 10 sqmm with factory made clamp.

Supply,laying and clamping of 1 no.PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms, making good the damages,colour washing etc. as required. 4 core 16 sqmm with factory made clamp.

Supply,laying and clamping of 1 no.PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms, making good the damages,colour washing etc. as required. 4 core 25 sqmm with factory made clamp.

Supply,laying and clamping of 1 no.PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms, making good the damages,colour washing etc. as required. 4 core 50 sqmm with factory made clamp.

Supply and laying 1 no.PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 4 core 10 sq mm.

Supply and laying 1 no.PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 4 core 16 sq mm.

Supply and laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 50/38 mm or nearest size.

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1KV grade as required. 4x10sq.mm(25mm).

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1KV grade as required. 4x16sq.mm(28mm).

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1KV grade as required. 4x25sq.mm(28mm).

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1KV grade as required. 4x50sq.mm(35mm).

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories,and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcol/ coke and salt as required.

Supply,providing and fixing 2x25 mm x 3 mm GI strip test joint to the earthing system.

Supply,providing and fixing 25 mm x 3 mm GI strip earth lead from the test joint to the earth plate.

Providing and fixing 3.15 mm dia copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/ cable as required.

Providing and fixing 2.65 mm dia copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/ cable as required.

Providing and fixing 2.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/ cable as required.

Supply of superior quality 3.14 mm copper earth socket and including crimping etc.as required.

Supply of superior quality 2.65 mm copper earth socket and including crimping etc.as required.

Supply of superior quality 2.00 mm copper earth socket and including crimping etc.as required.

Supply and providing 25x6mm brass nut and bolt etc.as required.

Supply and providing 12x3mm brass nut and bolt etc.as required.

supply and installation of dust and vermin proof,3 phase syntax ,eter board ( GS-MB-5628 ) [515 x 240 x 145] and to fix KSEB meters,fues units,RCCB,CT etc. as required including fixing it on wall,making good the damages colour washing etc. as required.

Fabrication, supply,conveyance,installation testing and commissioning of floor or wall mounting, dust and vermin proof,cubbicle type MV panel board comprising of the following componenets/ devices and complying to IS 8623 . Fabrication of fully partitioned,dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement,with front and rear access facility,bus bar chambers,hinged doors using 4 sq.mm braided copper conductor,providing necessary cut-outs for mounting meters,relays,indication lamps,bus bar interconnection etc. detachable covers for bus bar chamber and cable alley,powder coating the assembly.the measurments will be taken the area of the complete sheets used for panel board including partitions,folding,shrouding etc. supply and fabrication of MV panel board using 1.6mm CRCA sheet,powder coated (excluding base frame).

Supply and providing heavy duty 'A' section neoprene gasket in the panel board supply and providing 'U' section PVC beeding in the panel board.

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board.

Supply and providing and fixing following capacity TP and N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel,making connections etc. as required.100 Amp TP&N.

Supply and providing and fixing following capacity 4 pole on-load change over switch on wall/angle iron frame including drilling holes in frame,making connections etc.as required.415V, 50Hz.63A, 4 pole on-load change over switches

Supplying anf fixing 100A,HRC fuse with HRC fuse link with connections,in existing meter board.

Supplying and fixing 100A,2 way neutral links mounted on DMC/SMC base with connections,in existing meter board

Supply,threading,laying and jointing of the 32mm 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to UG cable.

Charges for preperation of KSEB test Report for submitting to the concerned KSEB section office.

SPANDS