Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC | L1 | Accepted-AOC 1st lowest | |
| 2 | L2₹40.4 L+₹2.3 L (6.14%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest | |
| 3 | L3₹42.1 L+₹4.0 L (10.5%)Rejected-AOC | L3 | Rejected-AOC 3rd lowest | |
| 4 | L4₹42.7 L+₹4.6 L (12.2%)Rejected-AOC | L4 | Rejected-AOC 4th lowest |
| Sl No | Description | Qty | Unit | sainulabid L4 | MANIKANDAN K L1 | SANJAY K S L2 | Sasikumaran T L3 |
|---|---|---|---|---|---|---|---|
| 1.00maintenance | |||||||
| 1.00 | 15.41:Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | 1,206 | sqm | 58.33 ₹70,345.98 | 47.53 ₹57,321.18 Lowest | 50.45 ₹60,842.7 | 53 ₹63,918 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4.95 | cum | 9,235.97 ₹45,718.05 | 7,527.32 ₹37,260.23 Lowest | 7,989.11 ₹39,546.09 | 8,313 ₹41,149.35 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 3,685 | kg | 200.93 ₹7,40,427.05 | 188.2 ₹6,93,517 Lowest | 199.75 ₹7,36,078.75 | 208 ₹7,66,480 |
| 1.00 | OD94995/2025-2026: Providing Galvanised Iron PUF sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2
Details of cost for a roof with each sloping side 18.09 x 5.10 m and the slope being flatter than
1 vertical to 2.5 horizontal. Area of roof = 2x18.09x5.1 = 184.518 sqm. details of length and
breadth. Length = 26X(laps)x0.135(each lap) = 3.51 width of corrugated sheet with 10
corrugation measured end to end = 0.8 metres 27 ( No. of sheet )x0.80 ( width of sheet) = 21.60
Length less laps =3.51 Length 18.09 breadth on one side C.G.S sheet 1 No. of 2.5 metres length
+ C.G.s sheet 1 No. of = 2.8 metres length = 5.3 metres deduct end lap of 20 cm (-) 0.2 metres
breadth = 5.1 m | 1,584 | 1 sqm | 1,326.64 ₹21,01,397.76 | 1,081.21 ₹17,12,636.64 Lowest | 1,147.54 ₹18,17,703.36 | 1,194 ₹18,91,296 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 134 | metre | 565.05 ₹75,716.7 | 460.51 ₹61,708.34 Lowest | 488.76 ₹65,493.84 | 509 ₹68,206 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 1,276.3 | sqm | 369.76 ₹4,71,924.69 | 301.35 ₹3,84,613.01 Lowest | 319.84 ₹4,08,211.79 | 333 ₹4,25,007.9 |
| 1.01 | 13.48.2:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture | 1,493.1 | sqm | 131.69 ₹1,96,626.34 Lowest | 148.08 ₹2,21,098.25 | 157.16 ₹2,34,655.6 | 164 ₹2,44,868.4 |
| 1.01 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 1,809.17 | sqm | 130.02 ₹2,35,228.02 Lowest | 195.61 ₹3,53,891.35 | 207.61 ₹3,75,601.37 | 216 ₹3,90,780.29 |
| 1.01 | 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) | 18.56 | sqm | 1,081.21 ₹20,070.5 | 962.68 ₹17,870.23 Lowest | 1,021.75 ₹18,966.75 | 1,063 ₹19,732.47 |
Tender Value
₹46.8 L
EMD Value
₹50,000
Closing Date
7 Aug 2026, 4:00 pmClosed
Executive Engineer
Executive Engineer
DEPOSIT Providing GI Sheet Roofing and Maintenance For Govt ITI Malampuzha No1 Palakkad
2026_PWD_863237_1
PWD/BLDG/TR/8450/2022_5_1_1
Open Tender
Civil Works - Buildings
Item Rate
240 days
Palakkad
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
Yes
₹50,000
Yes
14 Oct 2026
30 Jul 2026
11 Aug 2026
30 Jul 2026
7 Aug 2026
30 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1maintenance | |||||
| 1.001 | 15.41:Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | - | sqm | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.004 | OD94995/2025-2026: Providing Galvanised Iron PUF sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2
Details of cost for a roof with each sloping side 18.09 x 5.10 m and the slope being flatter than
1 vertical to 2.5 horizontal. Area of roof = 2x18.09x5.1 = 184.518 sqm. details of length and
breadth. Length = 26X(laps)x0.135(each lap) = 3.51 width of corrugated sheet with 10
corrugation measured end to end = 0.8 metres 27 ( No. of sheet )x0.80 ( width of sheet) = 21.60
Length less laps =3.51 Length 18.09 breadth on one side C.G.S sheet 1 No. of 2.5 metres length
+ C.G.s sheet 1 No. of = 2.8 metres length = 5.3 metres deduct end lap of 20 cm (-) 0.2 metres
breadth = 5.1 m | - | 1 sqm | - | - |
| 1.005 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.006 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 1 | sqm | - | - |
| 1.007 | 13.48.2:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture | 1 | sqm | - | - |
| 1.008 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 0.2 | sqm | - | - |
| 1.009 | 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1460155.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.69 MB
BOQ_1460155.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .