Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.5 Cr
EMD Value
₹1.5 L
Closing Date
29 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Dy. Municipal Commissioner ( East Zone) Ahmedabad Municipal Corporation
PROVIDING AND LAYING NEW DRAINAGE LINE WORK AND BREAKDOWN REPAIRNG ON 900 MM DIA AND BELOW DIA EXISTING AND SWD LINE AT VINOBABHAVENAGAR,VIVEKANANDNAGAR AND HATHIJAN GAM AND OTHER DIFFERENT PLACES IN RAMOL HATHIJAN WARD IN EAST ZONE AHMEDABAD MUNICIPAL CORPORATION
268380
EZ 26-1146/2025-26
Open
Miscellaneous Works
Works
Ahmedabad
3 documents required · 3 mandatory
₹3,600
Yes
Municipal Commissioner, Ahmedabad
₹1.5 L
Yes
22 Jan 2026
22 Jan 2026
22 Jan 2026
29 Jan 2026
22 Jan 2026
PROVIDING AND LAYING NEW DRAINAGE LINE WORK AND BREAKDOWN REPAIRNG
ON 900 MM DIA AND BELOW DIA EXISTING AND SWD LINE AT VINOBABHAVENAGAR
,VIVEKANANDNAGAR AND HATHIJAN GAM AND OTHER DIFFERENT PLACES IN
RAMOL HATHIJAN WARD IN EAST ZONE AHMEDABAD MUNICIPAL CORPORATION
Volume II: - Financial Bid
Section F: Schedule of Quantities & Rates
(1) Date of download Tender Documents : www.tender.nprocure.com
(2) Pre-bid Meeting : N.A
(3) Last date of online Tender Submission : Dt. 29-01-2026 upto 6:00PM hours
(4) Last Date of submission of Blank tender : Dt.30-01-2026 up to 4:00 PM hours by Speed
document, EMD & Tender Fee and Other Post or Registered Post AD, by courier or
documents. Hand delivery.
(5) Date of e-Tender (Technical Bid) Opening : Dt. 30-01-2026 at 5:00PM
Municipal Commissioner
Ahmedabad Municipal Corporation
Sardar Patel Bhavan
Ahmedabad – 380
Gujarat (INDIA)
PROVIDING AND LAYING NEW DRAINAGE LINE WORK AND BREAKDOWN
REPAIRNG ON 900 MM DIA AND BELOW DIA EXISTING AND SWD LINE AT
VINOBABHAVENAGAR ,VIVEKANANDNAGAR AND HATHIJAN GAM AND
OTHER DIFFERENT PLACES IN RAMOL HATHIJAN WARD IN EAST ZONE
PRICE QUOTATION SHEET
Earnest Money Paid Rs. : Rs.1,49,070/-
Date of Opening of Tender :
Quoted Price in Rs.1,49,07,070.28
I / We am / are willing to carry out work at _____________________ % above / below* percent (should be written in figures and
words) of the estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)
Estimated amount put to tender Rs. Estimated amount put to tender Rs.
Add ________ % above Rs. __________ Deduct ________ % below Rs. ___________
Total Rs. __________ Net Rs. ___________
Signature of Contractor Additional City Engineer (East Zone)
Name : Ahmedabad Municipal Corporation
Company's Seal :
PROVIDING AND LAYING NEW DRAINAGE LINE WORK AND BREAKDOWN REPAIRNG ON 900 MM DIA
AND BELOW DIA EXISTING AND SWD LINE AT VINOBABHAVENAGAR ,VIVEKANANDNAGAR AND
HATHIJAN GAM AND OTHER DIFFERENT PLACES IN RAMOL HATHIJAN WARD IN EAST ZONE
AHMEDABAD MUNICIPAL CORPORATION
SCHEDULE OF QUANTITIES AND RATES
DESCRIPTION QTY. RATE PER AMOUNT
Excavation for pipe line trenches for water supply,
sewerage line, manhole etc. all with shoring and struting
if required as per required gradient and line including
safety provisions using site rails and stacking excavated
stuff including up to all required lead cleaning the site etc.
complete for all lifts and strata as specified.
a) In all sorts of soil and soft murrum
1.A.1 Upto 1.50 mt depth 300.00 89.00 Cu.M
1.A.2 1.50 mt to 3.00 mt depth 300.00 98.00 Cu.M
1.A.3 3.00 mt to 4.50 mt depth 300.00 103.00 Cu.M
1.A.5 6.00 mt to 7.50 mt depth 300.00 113.00 Cu.M
Excavation for foundation for depth from 1.5 m to 3.0 m
3 including sorting out and stacking of useful 100.00 222.72 Cu.M
materials and disposing off the excavated stuff
Extra rate over item of excavation of earth for excavation of
asphalt pavement / RCC of thickness up to 0.20 meter
including demolishing the asphalt carpet, metal,s
oiling/cutting Reinforcement etc.comp. with stacking the
material as directed. (Based on Previously approved rate by
0.20 to 0.30 meter (By any type of Breaker Machine or
b R.C.C.Cutter machine including cost of operator, fuel, & 300.00 177.76 Smt
transportation etc complete.
0.30 meter & above (By any type of Breaker Machine or
c R.C.C.Cutter machine including cost of operator, fuel, & 300.00 311.08 Smt
transportation etc complete.
Conveyance charge of earth, lime, murrum, building
rubbish, manure, garbage, sludge, excavated rock, fly ash,
aggregates of any kind executed outside the road site. Rate
5 also includes spreading & levelling etc complete. Internal
conveyance above 50 mt done within the work site is not
payable. (R&B 2021-22 Statement No.5 Page no.5 & RA
Approved St.Com.Res No.189,Dt.19/05/2022)
e e) Lead From 4 Km to 5 Km. 1000.00 52.42 Cmt
Providing and supplying ISI marked only Standard length
Stoneware pipes in standard lengths of following class and
diameter including all taxes, insurance, transportation,
freight charges, octroi, inspection charges, loading,
unloading, conveyance to departmental stores, stacking etc.
complete. (IS - 651 / 1989)
Providing and supplying ISI Standard R.C.C. pipes(of
Sulphate Resisting Cement) in standard lengths of
following class and diameter suitable for either collar joints
7 or rubber ring joints including all taxes, insurance,
transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to departmental stores,
Note : One collar should be supplied with each full length
plain ended RCC pipe, cost included in rates below. One
rubber ring should be supplied with each full length
socketed pipe, cost included in rates below.
Class NP3 Test Pressure 0.7 Kg/sq.cm
Lowering, laying and jointing R. C. C. pipes in C. M.
1:1 1/2 of following diameters in proper position,
grade and alignment at all level as directed by
Engineer-in-charge including conveyance from stores to
site of work, labour, giving hydraulic testing as per ISI
Class NP2,NP3,NP4
Pipe dia. in mm
Lowering, laying and jointing Stone Ware pipes of
following diameters with cement joints in C. M. 1:1
proportion in proper position, grade and alignment at all
level as directed by Engineer-in-charge including
conveyance from stores to site of work, Jointing
material etc. comp.
Providing and supplying in standard length ISI mark rigid
unplasticised PVC pipes suitable for potable water with
ring fit joint including cost of rings, as per IS
specification no. 4985/1988 including all local and
central taxes, transportation, freight charges, octroi,
inspection charges, loading, unloading, conveyance to the
departmental stores and including cost of jointing meterial
1.One coupler / ring shall be provided with each full length
pipe cost of which is included in rates below.
Rate for PVC Resin as 134700/MT(price without GST)
Test Pressure 10 Kg/cm2.
11 L, L & J PVC/uPVC/cPVC pipes and specials
Lowering, laying, fixing and jointing PVC/uPVC/cPVC
pipes and specials of following class and diameter
including cost of conveyance from stores to site of works
including cost of labour, material, cement solvent, giving
satisfactory hydraulic testing as per ISI code.
12 Chamber for House Connection
Providing and constructing rectangular brick masonry
chamber for house connection as per type design in brick
masonry in C. M. 1:3 including M-100 in foundation M-
150 in benching inside plastering in C. M. 1:3 and outside 3.00 7922.00 No.
plastering in C. M. 1:3 coping in M200 and fixing RCC
precast manhole frame and covers, but Excl. supply of
manhole and cover etc. complete excl. excavation.
13 Temporary/Permanent plugging and blocking of sewer line,
branch connections and diversion of flows and removal of
400 to 500mm dia. Sewer line 10.00 1452.00 No.
600 to 700mm dia. Sewer line 10.00 2420.00 No.
14 Providing Dummy or Plug the Running Sewer by using
600 mm dia To 1200 mm dia 30.00 60000.00 No.
Above 1200 mm dia 30.00 90000.00 No.
15 Dewatering by pumping set
Dewatering by pumping set of required capacity
including temporary platform carting pumping at site and 20000.00 18.32 HP/hr.
fi i th i iti i l di ll i d
Barricading the entire break down or excavated area on
rental basis using wooden ballies / M.S.angles at max.
meter centre to centre, C.G.I. Sheet, reflective paint / Board
out side to avoid accident & for smooth traffic diversion &
16 movement including cautionary board etc. Item also 300.00 79.99 Rmt
includes for making temporary sufficient nos of lighting
arrangement through out the work with necessary required
arrangement. ..The same shall be removed after completion
of work. (Only for break down work from start to
a a. 150 mm to 300 mm dia. 5.00 1271.19 No.
Cutting the pipes of following dia coming in the new
M.H.in running sewer including cutting bars, including
removing debris /silt from the M.H. and carting at a
suitable distance etc..complete as directed. No payment
for M.H. work will be made until pipe is not cut
completely in all respect.
19 Refilling the pipeline trenches incl. ramming, watering, 2000.00 22.00 Cu.M
lid ti d l f l t ff di t d ithi
b Makadam/ supervision at day / Night 180.00 348.00 No
Providing & Supplying JCB Machine on rental basis in
case of emergency situation and break down type work &
also during unavoidable condition as per instruction of
engg. incharge , rate includes all nece. shifting, fuel and
operating charges and stacking of useful & non-useful
materials separately up to store. (No payment should be
allowed for non working condition of machinery and for
pipe line excavation and laying work)
Hiring of crane 90.00 6412.47 Day
To provide Tractor with Hydraulic Trolley, driver with
fuel, to carryout different works during day/night for Work
shall be carried out as per the instructions of Engineer In-
Charge. No extra charged shall be paid for night shift.
Providing & Supplying Hitachi Machine-200 capacity on
rental basis in case of emergency situation and break down
type work & also during unavoidable condition as per
26 instruction of engg.incharge , rate includes all nece. 500.00 2410.71 Hr
shifting, fuel and operating charges . (No payment should
be allowed for non working condition of machinery )
(Based on central work shop rate)
Providing F.R.C. MH seat cover incl. carting to the work
site etc. comp. Directed.
(SET cover and frame) F.R.C. Extra Heavy Duty [EHD-
35] Machinehole Covers & Frame- 560mm ø clear
opening, The dimension of frame and cover as per
mentioned in Amend No.1 to IS 12592 : 2002 table
Providing and laying cement concrete 1:3:6 (1- Cement : 3-
30 Coarse sand : 6- Hand broken stone aggregates 40mm 50.00 2339.59 Cu.M.
nominal size) and curing complete.
Providing CC M-100 for encasing pipes using trap metal
size 12 mm to 50mm including form work curing
consolidation etc complete for various location on pipe
Providing and casting in situ C.C. in grade M-25
(approx. corresp. to prop. 1:2:4) (proportions as per
mix design or as per Table 9 of IS456 2000 in
masses by weigh batching ) using granite, quartzite trap
metal of size 6 mm to 20 mm for RCC work, including
32 scaffolding centering, form work, needle vibrated 50.00 4906.00 Cu.M.
consolidation, curing comp. up to 6 meter depth
or height (excluding cost of reinforcement and neat
finishing) with centering and shuttering/deshuttering etc.
comp. for structure for other than water retaining.
Footing for column or foundation (with form work)
Brick work using common burnt clay building
bricks having crushing strength not less than
kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5.
(1- Cement : 5 -fine sand)(B) Conventional
Extra for brick work in superstructure above plinth level
upto floor two level (B) Conventional
Providing 15 mm thick cement plaster in single coat on
Rough (Similar) side of single or half brick walls for
interior plastering up to floor two level and finished even
and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand)
Providing TMT Bar FE 500D reinforcement for
R.C.C. work including bending, binding and placing
in position complete upto floor two level
38 M.S.Specials plain and Socket ends 22500.00 96.00 kg
39 Extra Welding for fixing various appurtances
Welding in all positions with required number runs, for
M.S.Pipes internally and/or externally including gauging
wherever necessary, fixing appurtenances and other
accessories in connection with pipe laying work as per
As above for Butt Joints : Plate thickness
40 Fitter/Mason/Gas operator per shift 3.00 425.00 no.
Gas Cutting of MS Pipe / Plates
Above 10 mm 50.00 81.00 Rmt
(A)Production & Supply of WMM to site of works 1000.00 1708.13 Cmt
Signature of Contractor Additional City Engineer ( East Zone)
Ahmedabad Municipal Corporation
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01. Technical Bid.pdf
02_Technical specification.pdf
03_Financial bid.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .