Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC INDEX NO E 108 HQ CWE NO 2 DELHI CANTT J 636 SECTOR 23 SANJAY NAGAR GHAZIABAD UTTAR PRADESH 201002 | GHAZIABAD | UTTAR PRADESH | 201002 | L1 | Accepted-AOC Acceptance of contracts | |
| 2 | L2₹40.8 L+₹1.1 L (2.76%)Rejected-AOC VIII BADWALA ARKEDIA GRANT PO PREMNAGAR DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L2 | Rejected-AOC R | |
| 3 | L3₹41.4 L+₹1.7 L (4.33%)Rejected-AOC 79B MIG PHASE 1 INDIRA PURAM G M S ROAD DEHRADUN UK PIN 248171 | DEHRADUN | UTTARAKHAND | 248171 | L3 | Rejected-AOC R | |
| 4 | L4₹47.8 L+₹8.2 L (20.5%)Rejected-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-AOC R |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
27 May 2023, 6:00 pmClosed
GE IMA Dehradun
GE IMA Dehradun
REPAIR CLEANING REPLACEMENT OF WORN OUT SEWAGE LINE MANHOLE INCLUDING CLEANING OF SEPTIC TANK AND MISC WORKS IN LOWER AREA NORTH COMPLEX UNDER AGE BR II AT IMA DEHRADUN
2023_MES_588894_2
GE/IMA/T-02 2023-24 9290/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹99,800
Yes
28 Jun 2023
6 May 2023
29 May 2023
7 May 2023
27 May 2023
13 May 2023
Amount
Demolition of brick or Stone masonry work built in cement mortar including all quoins jamb pillars etc complete all as specified.
M&L for brick work with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6 metre mean radius all as specified.
M &L for brickwork with burnt clay sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/septictank/ soakwell etc, in sewer works all as specified and directed.
All as per item No. 03 above but as in half brick thick wall built in cement mortar(1:4).
M&L for Stone masonry work with random rubble,brought up to course well bonded bedded and solidly hearted built in cement mortar 1:6 complete all as specified.
Taking down cemnt plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc complete as specified.
M&L for Rendering 15 mm thick in cement mortar (1:4) using crasher stone dust on brick or concrete surface finish even and fair complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M&L for 20mm thick ready mix external sand faced plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturer's specification, surface finished even & fair, complete all asspecified and directed Make : ACC /Ultratech/Birla/ Unicrete/Asian.
Demolition of reinforced cement concrete in any description complete all as specified.
S & F 60 mm thick factory made Precast reinforced cement concrete Design mix (M-30) manhole cover slabs, reinforced with 10mm TMT bars, hooks with black paint , etc complete all as specified and approved by Engineer-in-Charge. Make:- Tulip/Ferrocon/Sagar Tiles
S & F 80 mm thick factory made Precast reinforced cement concrete Design mix (M-30) drain cover slabs, reinforced with 10mm TMT bars, hooks with black paint, etc complete all as specified and approved by Engineer-in-Charge. Make:- Tulip/Ferrocon/Sagar Tiles
M & L for cement concrete 1:3:6 type C-2(using 40 mm graded crushed stone agg) as in surface channel ,drain,complete all as specified and directed.
Extra forming fair finished drain or channels 30Cm girth in cement concrete using extra cement including forms moulds, mitred/stopped end etc.
M & L for PCC 1:3:6 type C-1(using 20 mm graded crushed stone aggregate) as in coping including use and waste of form work where necessary complete all as specified and as directed.
Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in deapth for foundation or for shaft etc n. exc 10 sqm on planand getting out in soft/ loose soil complete all as specified & directed.
All as per item no 16 above but depth exc 1.5 m and not exeeding 3m.
Returning, Filling in, with excavated soil including spreading leveling, watering and well ramming in layers not exc 25Cm thick in soft/ loose soil complete all as spesified & directed.
Removing excavated materials (soils) n.exc. 50m and depositing where directed at a level n.exc. 1.50 m above the starting points complete all as specified & directed.
M & L for Reinforced concrete pipes, 100 mm dia ,class NP3, laid and jointed complete with collars, incl demolition.
M & L for Reinforced concrete pipes, 150 mm dia ,class NP3, laid and jointed complete with collars, incl demolition.
M & L for Reinforced concrete pipes, 200 mm dia ,class NP3, laid and jointed complete with collars, incl demolition.
M & L for Reinforced concrete pipes, 300 mm dia ,class NP3, laid and jointed complete with collars, incl demolition.
M&L for DWC(Double wall coruggated) HDPE pipes of size 100mm (ID) confirming to IS-16098 (Part-II) of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed. Make:-Astral Ltd. (Brand-HDPE Pro), Finolex, Prayag polymer put Ltd.
M&L for DWC(Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS-16098 (Part-II) of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed. Make:-Astral Ltd. (Brand-HDPE Pro), Finolex, Prayag polymer put Ltd.
M&L for DWC(Double wall coruggated) HDPE pipes of size 200mm (ID) confirming to IS-16098 (Part-II) of strength/stiffness class SN-8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.Make:-Astral Ltd. (Brand-HDPE Pro), Finolex, Prayag polymer put Ltd.
M&L for DWC(Double wall coruggated) HDPE pipes of size 300mm (ID) confirming to IS-16098 (Part-II) of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.Make:-Astral Ltd. (Brand-HDPE Pro), Finolex, Prayag polymer put Ltd.
M & L for concrete bed to 100 mm dia drain pipes forming cradles : in Cement concrete 1:4:8 type D-2 complete all as specified and directed.
M & L for concrete bed to 150 mm dia drain pipes forming cradles in Cement concrete 1:4:8 type D-2 complete all as specified and directed.
M & L for concrete bed to 200 mm dia drain pipes forming cradles in Cement concrete 1:4:8 type D-2 complete all as specified and directed.
M & L for concrete bed to 300 mm dia drain pipes forming cradles in Cement concrete 1:4:8 type D-2 complete all as specified and directed.
M & L for PCC type C-2 1:3:6 (using 40 mm graded crushed stone agg) in foundation /Bed of manhole ,filling and mass concrete all as specified and directed.
M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reformsing benching as required for 150 mm dia pipe
Construction of brick soak well 2.40 m dia and 3.00 m deep, excavation in soft/ loose soil for foundation in PCC 1:3:6 using 40 mm graded stone aggregate, honeycomb brick work in cement mortar 1:4, RCC 1:2:4 type B-1 as in slab, filling with brick bats including necessary earth work complete in repair and all as specified and shown on drg No. TD/309 Sheet 1/4 to 4/4.
Construction of brick soak well 3 M dia X 3.0 M depth, excavation in soft/ loose soil for foundation in PCC 1:3:6 using 40 mm graded stone aggregate, honeycomb brick work in cement mortar 1:4, RCC 1:2:4 type B-1 as in slab, filling with brick bats including necessary earth work complete in repair and all as specified and shown on drg No. TD/309 Sheet 1/4 to 4/4.
Cleaning the sewage line up to and 150mm dia by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and throwing the enough quanity of lime to stop the foul smell complete all as specified and directed.
Cleaning the sewage line over 150mm dia and upto 300 mm dia by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and throwing the enough quanity of lime to stop the foul smell complete all as specified and directed.
Cleaning of septic tank /soakage well/Manhole of any capacity mechanically bu using mobile high pressure super sucker machine (Honey sucker) consisting of a sluge tank a high pressure water jet pump and high flow jetting blower or vaccume pump for suction and each trip shall clean minimum 6 cub.m of sludge including of dilute liquid. Pumping out sewage water, accumulated night soil, sludge's, (both solid and liquid) and other obstructive material into dump tank and removing to outside of Defence land immediately for disposal, re-fixing the cover after complete cleaning, all as specified and directed. Note: - 1. After removal the sludge, the septic tank, soak well, manholes to cleaned with throughly with water. 2, Proper hygenic perecationed shall be maintained.
Cleaning blockage of WC ,Gully trap, floor trap etc up to Ist manhole by roding and removing sludge if any incl cleaning the area by flushing water complete all as per site requirements and as directed.
M&L for Vitreous china squatting pan white "Orissa Pattern" of size 580x440mm with integhral foot rest complete (excluding flushing cistern and flush pipe) including bend pipe for flush connection to trap and to flush pipe and making good the floor with provn of concrete bedding in repairs and all as specified and directed.
S&F 10 litre capacity PVC valve less syphlonic action type flusing cistern low level white with inlet ball valve, float, handle including brackets etc fixed in repairs complete all as specified..
Dismantelling floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.06sqm but nexc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in grout to match the colour of tile laid on 15mm thick screed bed in cement mortar 1:4. Grout Make:- Unicrete/ACC/Birla/Asian
M&L glazed ceramic coloured jointless tiles (450x450)x6-7mm thick as in vertical surfaces including 10 mm thick rendering in cement mortar1:3 and set and jointed in neat cement slurry and pointed in grout to match the surface of tiles complete all as specified and directed. Grout Make:- Unicrete/ACC/Birla
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore, complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall 110mm bore, complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore, complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door, complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm bore, complete all as specified and directed
Excavating over areas in hard and dense soil n.exc 1.5m deep and getting out complete all as specified.
All as per item No 51 above but for depth exc 1.5m deep and not exc 4.5m beyond the second 3m depth.
M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, Sub base etc, complete all as specified.
M&L for Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete.
Material and labour for Formwork to circular well steining and well curbs all as specified.
M&L for RCC M-25 (design mix) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; complete all as specified and directed.(reinforcement shall be measured separately).
M&L for Reinforced cement concrete design mix M-25 in walls, retaining walls, basement walls, complete all as specified and directed.(reinforcement shall be measured separately).
Material and labour for TMT bars 10 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to fe-410-0 as specified.
S & F medium weight rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Fe 410 -W (Gde E- 250) qualityA. All as specified and as directed
Material and labour for 75 mm thick cement concrete 1:3:6 type C-2 ( using 20 mm graded crushed stone aggregate) as in plinth protection complete all as specified.
M&L for applying two coats of two compenents elastomeric water proofing compound on the entireconcrete surface of sump portion all as specified Note :- Make :-Pidilite/ Delite/Sika/STP
Demolition of cement concrete in ground floor and pavings n.exc. 15 cm thick below or above ground level. (un renforced)
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggt) as in mass concrete,foundation and sub base complete all as specified and directed.
S&F Rubberised polished precast coloured cement concrete Interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Ferrocon/Tulip/Sagar Tiles
S&F Rubberised polished precast coloured cement concrete Interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Ferrocon/Tulip/Sagar Tiles
Aggrawal Builders and Furnishers
ACE BUILDERS AND CONTRACTORS
M/S PUNDIR BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .