SPL REPAIR TO BLDG NO P-67 OF MTN ARTY BDE CAMP AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Taking out complete existing roof treatment from roof surface & roughening of old concrete floor surfaces incl cleaning the roof surfaces by brushing sweeping etc and removing rubbish n. exe 50 meter as per direction of Engr-in-charge.

M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs cleaning out and tacked the polymeric membrane into the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc all as specified and directed by the Engineer-in-charge.

M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and fair without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item of this Schedule 'A').

M & L PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound in top layer @ 3% by weight of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A').

M&L for clearing of plastered roof surface & applying one coat of cold bitumenous primer @ 0.25 lits per sqm conforming to IS 3384-1986, and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.50 Kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over Bitumenious primer (Application of polymerie memberane shall be by torch application, over laps shall be minimum 100mm on the transverse direction & 75 mm on the longtudinal direction) coved fillet in PCC (1:2:4) type BO of radius 75 mm shall be provided at the junction ofroof& other vertical surfaces & surfaces shall be painted with hot paving bitumen of penetration value 30/40 conforming to IS 73 @ 1.20 kg/sqm over a coat of bitumenous primer @ 0.30 ltrs per sqm & applying one coat of aluminium paint over the APP nmodified membrane @ 0.11 kg/sqm all as speciied and directed.

Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as specified and as directed

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

M&L for one coat of synthetic enamelled paint on steel surfaces over 10 cm width or girth including preparation of old surfaces.

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles,complete all as specified and as directed.

Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in Skirting / Daddo etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dado complete all as specified and as directed.

Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles,complete all as specified and as directed.

Material & Labour glazed ceramic coloured tiles 350 x 250 x 7 /450 x300x7 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dado complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor finishes,complete all as specified and as directed

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dado complete all as specified and as directed

M&L 25 thick P.C.C (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in floor finished rough complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing 100 mm thick cement concrete type C-2, 1:3:6 using (40 mm graded brick aggregate) as in path or paveway finished rough without using extra cement complete all as specified and directed.

M& L Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors and cut and polished with grey cement and pigments all as specefied.

Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified and directed.

Material and labour PCC 1:3:6 type C2 using 40 mm graded aggregate as in surface channel/drain complete all as specified and directed.

Material and labour Extra for form fair finished drain on channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred stoped end etc complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30 cm ditto complete all as specified and as directed

Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as rough finished surface complete all as specified and as directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed

M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and as directed

Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etccomplete all as specified and as directed.

M&L 15mm thick rendering in CM (1:4) on brick work/ concrete surfaces in two layers (10mm backing coat and 5mm finishing coat mixed with integral water proofing compound @ 3% by wt of cement,) finished even and fair complete all as specified and as directed.(Note: Water proofing compound measured & paid separately)

M&L 10 mm thick rendering in CM (1:6) on than fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed.

M & L for 5 mm thick rendering in CM (1:3) on fair face of concrete surfaces as in ceiling,chajjas etc finished even and smooth without using extra cement complete all as specified and as directed.

M&L applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with preparation of new plastered surfaces complete all as specified and directed by Engr-in-Charge.

M&L complete removal of internal wall finishes by scrapping down and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with preparation of new plastered surfaces complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new plastered surfaces by applying 1mm thick wall care putty and applying two coats of oil bound distemer over a coat of primer on new plastered surfaces complete all as specified and as directed . Make : Nerolac, Asian Paint Ltd, Berger (Luxul)

M & L complete removal of internal wall finishes by scrapping down and preparation of old plastered surfaces by applying 1mm thick wall care putty and applying two coats of oil bound distemer over a coat of primer on old plastered surfaces complete all as specified and as directed . Make : Nerolac, Asian Paint Ltd, Berger (Luxul)

M&L for preparation of new plastered ceiling ,chajjas surfaces and applying three coats of white wash over it complete all as specified and directed.

M & L for washing, rubbing down and stopping of distempered and painted surfaces of internal ceiling by scrapping down and applying two coats of white wash including preparation over old plastered ceiling /Chajjas surfaces complete all as specified and directed.

Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed.

Supply only liquid water proofing compound

Dismantling ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and as directed

S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specified .

S&F for Non asbestos fibre cement building board (E- Board) 6 mm thick for fixed to Aluminium frame work with screws as in ceiling complete as specified and as directed.

M & L for preparation of new unplastered surfaces over ceiling and applying two coats of oil bound distemer over a coat of primer on board complete all as specified and directed.

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and as directed

M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified and directed.

M&L cement concrete in foundation filling and mass concrete type c-2 1:3:6 (40 mm graded stone aggregate) complete all as specified and as directed

S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed.

S&F Plain, solid, stright chowkats in 2nd class hard wood and framed rebates on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and as directed.

Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required in Exc. half brick butn exc Full brick complete all as specified and directed.

M&L mild steel work as in holdfast and similar works conforming to Fe290 GDE E-165 complete all as specified and as directed.

Supply &Fix 25 mm thick exterior grade prelaminated particle board (prelaminated on one side) with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work for cupboard shutters complete all as specified.(Make: Kit Ply/Bhutan Board/Novapan)

Supply & Fix 18/19 mm thick exterior grade prelaminated particle board (prelaminated on one side) with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work for Cupboard partition complete all as specified.(Make: Kit Ply/Bhutan Board/Novapan)

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails

Material and labour II nd class hardwood plain fillets square, rectangular or triangular in sectional area exc 13 Sqcm & n. exc 25 Sqcm clean swan secured with nails complete all as specified and as directed.

Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 Sqm each complete all as specified and directed.

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face as per specification and drawing complete all as specified and directed.

S&F Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of100mm size type B-21..

S&F continious (Piano) hinges, mild steel, bright finish or electro galvanised of 30mm width (when open)

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply & Fix 40mm dia copboard knobs fixed with nut, screw and washer of brass polished. complete all as specified and as directed

Supply & Fix 100 mm aluminium anodised Hasp and staple, safety type,including bolt to hinge plate fixed with screws

S&F in repair Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of100mm size type B-21..

S&F in repair 200mm long aluminium anodized barrel tower bolts of extruded section.

S&F in repair 150mm size extruded aluminium alloy handles, fabricated type anodized.

S&F in repair Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Dismantling timber boarding of any description fixed in any position complete all as specified and as directed

S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation complete all as specified and as directed

M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed.

M & L preparation of old wooden surface and applying one coat of synthetic enamel paint over it exc 10 cm width or girth complete all as specified and as directed.

Supply & Fix in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and as directed.

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge and making good the surface complete all as specified and as directed.

S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick Frosted tinted glass fixed in panels with suitable locking arrangements and making good the surface complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed

M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed.

Demolition of PCC/ Lime concrete from sunken floor (ground or 1st floor) and removing and depositing materials exc 150 mtrs but n exc 250 mtrs away complete all as specified and as directed

M & L for mass concrete filling using PCC ( 1:5:10) type E2 in sunken floor complete all as specified and as directed.

M & L 20mm thich cement plaster in CM 1:4 mixed with water proofing compound @ 3%using extra cement and applying water proffing treatment on sunken portion with acrylic based polymer modifed cementitious composit compound as specified and approved & cement slurry two layers, 1st layer @ 0.488 Kg/ Sqm mixed with composit compound @ 0.253 Kg/Sqm, & the second layer slurry @0.242 Kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 µ polyflim with adhesive complete all as specified and as directed.

Supply & Fix in repairs vitreous china squatting pan " Orissa Pattern" size 580 x 440 mm white with integral foot rest including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes complete all as specified and as directed

S&F in repairs vitreous china wash basin, white, flat back, size 450x300m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed.

S&F low density polythene (LDPE) pins of pressure rating 6 Kg/Sq cm bore of tube 32 mm for waste pipe of WHB sinks etc.complete all as specified and as directed

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed .

S&F in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. (Make - Cera/Prayag )

S&F in repair 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed .

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed. (Make - Cera/Prayag)

S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed. (Make - Cera/Prayag )

S&F 15mm bore brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed.(Make - Cera/Prayag )

Supply and fix in repairs of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed

S & F Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and as directed.

S& F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed

Taking up or down, steel tubing 15mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed

Supply and fix 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed.

Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wallcomplete all as specified and as directed

S&F in repair stainless steel plate rack of size 31'' x 36'' x 10'' in repair complate all as specified and directed (M/S Blue Star or equivalent make of M/S Jain Brothers sanitation Pvt Ltd Brand -Jayna)

Supply and fix in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm and waste fittings 40 mm dia, brass, chromium plated for glazed ware sinks,basins,etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. but exclusive of fixing of supply and waste pipe complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000ltrs etc complete all as specified and directed.

S&F rotational moulded polythylene water storage tank (Cylendrical ,vertical with closed top) hoisted and fixed in position capacity 500 Ltrs all as specified in SSR Part-I complete all as specified and as directed (Make:-Sintex or equivelent)

S&F ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms)

S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting complete all as specified and as directed.

Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed

Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed

Supply and fix 110 mm bore PVC (SWR) bends in any types complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed..

Supply and fix 110 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed..

S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed

M&L for Treating the soil along with external perimeter of building @ 2.25 litre of emulsion / m of the perimeter wall

M&L for Treatment of soil under existing floors using emulsion @ 01 litre / hole, 300mm apart including drilling & plugging 12mm dia holes with CM(1:2) to match the existing floors

Schedule'A' Part-I: E&M works (Internal Electrificaion)

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside for schedule of credit to contactor including making good of the disturbed surfaces, all as specified and directed.

Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLSH unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note for item Nos. 132 to 138: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii) Cost of chase cutting for conduit wiring shall be included in the qouted rate.

All as per item No 132 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches.

All as per item No 132 above but for one 3/5 pin 6 Amps socket outlet on the independent board.

All as per item No 132 above but for one 3/5 pin 6 Amps socket outlet on the independent but below the switch board of light points in the same vertical plane wall.

All as per item No 132 above but for one call bell point controlled by one bell push.

All as per item No 132 above but for one light point controlled by two 2 way switch complete all as specified and as directed.

Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLSH unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed.

Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed.

Materials & labour for call bell Ding Dong, AC, 230 volt, single pole complete all as specified and as directed

Supply & fixing bell push, flush type, 6 Amps complete all as specified and as directed

Materials & labour for switch piano flush button 5/6 Amps single pole, 1 way 240 V ISI marked complete all as specified and as directed.

Material and labour for switch socket combination 5 Pin, 6 Amps flush type ISI marked complete all as specified and as directed

Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified as directed

Materials and labour for socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Materials and labour for ceiling rose surface bakelite,PVC/poly 65 x 50mm, three terminals complete all as specified and as directed.

Materials and labour for electronic fan regulator (step rotary type), AC 240 volt complete all as specified and as directed.

Supply & fixing MCB DB (Double door) SPN, 8 way , 200 A rated IP-43,IK-09, sheet steel with bus bar, din rail, neutral link and earth bar(concealed in wall) including taking down old DB with fitting & fixtures all as specified and directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'B' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed.

Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I including taking down old earthing.

Material and labour for sub main wiring with two single core ,1100 V grade ,PVC insulated cable with Copper conducter FRLS unsheathed cable of size 4.0 sqmm drawn through & including PVC Casing -N- capping with 4.0 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unservicable submain wiring complete all as directed. Note : Two run of 4.0 sqmm & one run of 4.0 sqmm of cable shall be measured as single run.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Including taking down old unserceable light fitting complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete ncluding taking down old unserceable light fitting complete all as specified and as directed.

Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed

Material and labour for fixing of 4 way power TPN DB in double door including re-connection with existing earth wire to DB ncluding taking down old unserceable DB

Taking down ceiling fans of any size and kept in store complete all as specified and directed.

Hanging/refixing ceiling fans of any size complete all as specified and directed.

Supply and fix in replacement decorative type fancy wall light including taking down the old unserviceable CFL/GLS lamp complete all as specified and as directed.

Taking down & refixing kwh meter with proper connection complete all as specified and directed.

Taking down & refixing exhaust fan with two nos connector pipes and nut bolts for proper fixing complete all as specified and directed.

Supply and fix MCB triple pole & neutral 63 amps, 240 volts, 10 KA, 'B' series with all incoming / outgoing connections suitable for 4 way type TPN DB in double door with proper size of aluminium lugs complete all as specified as directed .

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.

SHRI RAJESH DEY (BID ID -3128033)

SHRI CHANDAN CHANDA (BID ID -3127919)

M/S SANKAR GOPE (BID ID -3128520)

SUMAN DEB (BID ID -3128082)

SHRI SUBRATA GUHA (BID ID -3127500)

M/S PRITAM ENTERPRISES (BID ID -3128313)

M/S New Saha Enterprise (BID ID -3127581)

M/S UTTAM GANGULY ENTERPRISE (BID ID -3127819)

Pranjit kar (BID ID -3127583)