SPECIAL REPAIRS TO DISPENSARY AT 42A BLDG AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) DM VISAKHAPATNAM

Amount

[SCHEDULE 'A' PART-I [B/R WORKS]

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down water etc., complete all as specified and as directed.

M&L rendering 5mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces as in ceiling finished even & smooth (without using extra cement) complete all as specified and as directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth even without usig extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work for concrete surface and finished even smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on wallsover 1-3mm thick wall care putty, complete all as specified and as directed.

M&L for complete removal of existing treatment on existing wall surface and applying two coat of oil bound distemper on wallsover 1-3mm thick cement based wall care putty, complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coat of weather proof exterior emulsion paint on walls over 1-3mm thick wall care putty, complete all as specified and as directed.

M&L for complete removal of existing treatment on existing surface and applying two coat of weather proof exterior emulsion paint on walls over 1-3mm thick wall care putty upto double story bldgs, complete all as specified and as directed.

M&L for complete removal of existing treatment on existing wall surface and applying three coat of white wash on ceiling over one coat of chalk white, complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but n exc 4.0 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each but (Without taking off shutters from the frame) and removing away from site complete all as specified and as directed.

S&F 12 mm thick glass door each side having 2 Nos SS handle of 500mm long , with top SS pivot fitting and bottom SS Hydraulic floor mounted glass door fitting including necessary fixtures, 1 No. Lock of with Key in duplicate , regulated by double action hydraulic floor door spring, door is toughened and glazed with 50 micron thick tinted glass and dooris properly installed with appropriately cutting the glass and drilling complete all as specified and directed. [Note:- This item includes taking down existing wooden door and surface preparation of opening and fixing new door in the same opening].

Supply and fix powder coated, anodized aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 200mm long and 1 No mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5mm thick sheet glass and partly paneled with 12mm thick particle board pre-laminated fixed with glazing clips, rubber beadings and aluminium beadings all as specified Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx) Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg/RM appx) Bottom rail : 150.00 x 2.20mm thick (2.376 Kg/RM appx) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg/RM appx) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg/RM appx)

S&F for provide factory made UPVC white colour sliding window Three track made of extruded profile with wall thickness of 2.3mm (+ / - 0.2mm), window profile with hollow section with multi chamber frame (88mm x 52mm), sliding sash (42mm x 67mm) sliding mesh sash (42mm x 57mm) sliding interlock (one verticle length in each shutter ) (45.5mm x 28mm) , Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of hole for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket ,1.2 +/ - 0.2mm thick galvanised steel frame (30mm x 18mm ) 2 Nos sliding sash (30mmx18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame shall be fixed to the wall with 8mm x 100mm long fastners, Hardware [Touch lock of zinc alloyed (white powder coated ), steel roller system . Stainless steel wire cloth 0.36mm nominal dia of wire average width of aperture 1.40mm and required accessories.] for Area n exceeding 2.00 sqm each (Note :- (i) The unit rate quoted by contractor excludes cost of glass and wire mesh includes all other connected accessories. (ii) Net opening shall be measure for payment purpose)

S&F for 5mm thick sheet glass ordinary quality and glazing in frame in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&Fstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified and as directed.

S&F powder coated anodized aluminium window and ventilator fixed type without sash bar, aluminium section wighing 0.55 kg/M including necessary jointing cleats, glazing clips, rubber packing and anodised aluminium snap beading screws with 5.5 mm thick sheet glass ordinary quality etc, complete all as specified and directed.

Dismantling of wall and ceiling board (fibre , pulp, insulation ,etc) or insulation board /slabs/of any thickness including cover fillets, and removing away from dockyard premises complete all as specified and as directed.

S&F anodised aluminium snap grid frame work of size 605x605mm using main and cross tee of size 15mm x 15mm 1.5mm ( weight not less than 0.12 kg / Rm) and wall angle of size 40mm x 25mm x 2mm ( weight not less than 0.36 kg / Rm) with 6 mm thick pre painted fibre board for insulation and accoustic purpose 60cm x 60 mm as in ceiling with hanger 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceilng cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete all as specified and directed.

S&F in repair roller blinds including hanging arrangement made up of anodized aluminium section with acrylic ,bottom weight type 3 vista level seleced quality complete all as specified and dircected.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed.

M&L for 9-10mm thick light shade vitrified ceramic tiles (Square/ Rectangular ) polished area of each n. exc 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white coloured laid over and including cement screed 15mm thick in CM1:6, complete all as specified and as directed.

All as per item No. 1.24 but wall / skirting including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7-8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white coloured laid over and incl cement screed 15mm thick in 1:6, and complete all as specified and directed

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed in CM 1:6 , 15mm thick complete all as specified and directed.

M & L for coloured glazed ceramic tiles 350 x 450 x 7 -8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over including rendering in CM 1:4, 10mm thick complete all as specified and directed.

M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform, cooking platfoorm, steps, pillar, window cills, and like including cutting in oval shape for oval type WHB below counter basin etc., in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed.

S&F in repair Vitreous China Ware coloured counter Oval shape Wash hand basin of size, 550 x 400 mm complete, Ist quality (flat back or angle back type), including cutting for and pinning ends of brackets or erecting stand and including suitable waste pipe and waste fittings complete all as specified and as directed.

S & F in repairs Viterous China wash down water closet pan (pedestal pattern ) including PVC seat cover complete all as specified and as directed.

S & F in repair PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc., complete all as specified and directed.

S&F in repair PVC connection (high density) 15 mm dia 600 mm with PTMT nuts both ends with rubber washer complete all as specified and as directed.

Taking down GI tubing 15mm dia with all connection complete all as specified and as directed.

Taking down GI tubing 20mm dia with all connection complete all as specified and as directed.

Taking down GI tubing 25 mm dia with all connection complete all as specified and as directed.

S & F 15 mm bore UPVC pipe including all necessary fittings (Elbow,Tees,socket etc.), for water supply pipe etc., fixed concelled in walls and ceiling or laid in floors complete all as specified and as directed.

S & F 20 mm bore UPVC pipe including all necessary fittings (Elbow,Tees,socket etc.), for water supply pipe etc.,fixed to walls and ceiling or laid in floors complete all as specified and as directed.

S & F 25 mm bore UPVC pipe including all necessary fittings (Elbow,Tees,socket etc.), for water supply pipe etc.,to walls and ceiling or laid in floors complete all as specified and as directed.

S & F in repairs 15 mm bore chromium plated bib taps(fency type), cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs 15 mm bore swan neck pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs Fancy type chromium plated 15 mm bore angular stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

M&L for disconnecting existing unserviceable water tank 2000 ltrs and hosting and fixing rotational moulded polyethylene new water storage 2000 ltrs cap tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs complete all as specified and as directed.

S & F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any legth with rubber ring joints laid in floors or trenches or fixed in wall complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR) , waste and rain water pipes single socketed in any length with rubber ring joints fixed in wall completecomplete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

M & L for 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal With access door complete all as specified and as directed.

S&F in repair Waste pipes 32 mm dia LDPE pipes 900 mm long of pressure rating 6 Kg/cm2 for wash basins and urinals complete all as specified and as directed.

Demolition of RCC any description and in any position not otherwise specifically provided including cutting of reinforcement as required to facilitate demolition complete all as specified and as directed.

Demolition of PCC flooring (unreinforced) not exc 15 cm thick (Below or above ground level) and removing debries out side to Dockyard premesis complete all as specified and as directed.

M&L for Surface preparation of RCC column, Beams, chajja, roof drops, soffits of slabs (Ceilings) by removing existing cement plastering, hacking the surfaces of RCC work for key to a depth of 15mm by gentle chipping manually to make surface rough and throughly cleaned with air and water jet as per standard practice as a prparatory to the Carbon fibre wrapping complete all as specified and as directed.

M&L Polymer modified cementious bonding coat, prepared and applied on the concrete / masonry surfaces with in ratio 1:1 to 1:1.5 of polymer and cement complete and sprinkling quartz sand on it. Adhesive bond strength not less than 2.50 MPa complete all as specified and as directed. [Make: Sika/ BASF/Fosroc/Dr Sunanada].

Providing, placing and fixing form work shuttering to the columns , beams, chajjas, drops, fins, parapets etc., for the proposed micro concrete encasement as detailed in sketch, specifications, standard practice and complete all as specified and as directed. [Note : Cost inclusive of all materials, carpentry work, transportation, labour, tools and tackles, lead and lift etc.]

M&L for RCC M 30 grade (design mix) (20mm graded aggregates) in foundations, including rafts, footings, foundation beams, plinth beams in plinth protection bases for columns, etc., basement slabs, under-reamed piles and mass complete all as specified and as directed.

Cutting holes into or through cement concrete slabs, chajjas, etc., reinforced or otherwise not exceeding 100 sq cm complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 5mm dia and overupto 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Precast cement concret type B-0 1:2:4 (12.5 mm graded aggregate) louvers and Jallies 35 mm thick including all moulding and frame, set in cement mortar 1:4, complete all as specified and as directed including taking out old one.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick with sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM (1:6) for exceeding half brick walls complete all as specified and as directed.

M&L for providing & fixing 12 mm dia 100 mm long MS / TS dowel pins / staple / shear pins including drilling holes in concrete, providing labour, materials for grouting the pins complete all as specified and as directed.

Cleaning the concrete surface by removing dirt and debris, making defective locations and removing loose concrete, carefully stripping out old roof treatment untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete all as directed

M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 with WPC as per manufacturer instruction finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps. (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.(Note : Only WPC shall be measured and paid separately as supply only under respective items in this schedule)

Supply only intigral water proofing compound all as specified.

S&F Pre painted galvalume aluminum zinc coating GI based corroguated cranked steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof overing / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Steel work in tubular pole including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and as directed.

M&L for 100 mm dia (OD) with 3.0 mm wall thickness stainless steel tube of of grade 316 as in vertical posts ( balustar) for stair case railing fixed with 4 nos M12 x150mm anchor fastners pin fixed with epoxy grout like Lokfix E75 of Fosroc or any other equivalent make epoxy grout type including necessary jointing welding by stainless steel electrod specification No. AWS E 308L-16 and weld seam of 3mm complete all as specified and as directed. (Note Approximate length of each balustar is 1000 mm)

M&L for for 50 mm dia (OD) with 1.6 mm wall thickness stainless steel tube of of grade 316 as in horizontal rail for (one at top and one at bottom of vertical post) stair case railing fixed with vertical post with welding by stainless steel electrod specification No. AWS E 308L-16 and weld seam of 3mm complete all as specified and as directed.

M&L for for 25 mm dia (OD) with 0.84 mm wall thickness stainless steel tube of of grade 316 as in horizontal rail (intermediate rail or stiffener) for stair case railing fixed with vertical post with welding by stainless steel electrod specification No. AWS E 308L-16 and weld seam of 3mm complete all as specified and as directed.

M&L preparation of existing floor surfaces by brussing for removing dust etc. sweeping with broom and finally cleaning the surfaces by cloths etc. for removing loose dirts etc., S&F 9 mm thick High Pressure laminate(HPL) (made up of minimum of 5 layers), moisture resistance with HydraCore Plus HDF infused core, high resistance to wear-through, dents, stains, fading as in wooden laminated flooring with plank size of 1200mm long and 150mm width fixed in grooves over 6 mm thick 40 density foam cushion including necessary adhesive, fixing tape complete all as specified by manufacturer and as directed.

S&F 9 mm thick High Pressure laminate(HPL) (made up of minimum of 5 layers), moisture resistance with HydraCore Plus HDF infused core, high resistance to wear-through, dents, stains, fading as in wooden laminated skirting with plank size of 75 mm width fixed in grooves over and including 12 mm thick plywood ( 07 Nos of ply) grade BWR, Type BB, 75 mm width, fixed with adhesive with laminated skirting, and with nails with laminated flooring complete all as specified. all as specified by manufacturer and as directed.

S&F 32 mm wide 9 mm thick High Pressure laminate running beads fixed at the top of wall panelling / skirting complete all as specified and as directed.

SCHEDULE 'A' PART-II [ELECTRICAL WORKS]

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, with fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials from the site and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures etc complete from existing main boards and removing from site complete all as specified and directed.

M&L concealed point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of modular sheet steel terrminal board with modular back plate and cover plate as required for mounting modular switches, sockets, regulators etc complete for one light / bazzer point / fan point controlled by one one way switches complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..

M&L concealed point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of modular sheet steel terrminal board with modular back plate and cover plate as required for mounting modular switches, sockets etc complete for one 3 pin 5/6 Amp socket outlet on independent board complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..

M&L concealed point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of modular sheet steel terrminal board with modular back plate and cover plate as required for mounting modular switches, sockets etc complete for one 3 pin 5/6 Amp socket outlet on same board with other switches complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed.

M&L concealed point wiring with 2.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of modular sheet steel terrminal board with modular back plate and cover plate as required for mounting modular switches, sockets etc complete for one 5 pin 15/16 Amp socket outlet on independent board complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..

S & F modular switch 6 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed.

S & F modular socket 6 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.

S & F modular switch socket combination 6 Amps, 3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.

S & F modular switch socket combination 16 Amps, 6 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.

S&F Modular fan step regulator, 120 W, 2 modules complete all as specified and as directed.

M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, conforming to IS, complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking out old fittings complete all as specified and directed. .

Supply and fixing LED lights fitting 2x 18 /20 W 220V, AC batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking out old fittings complete all as specified and directed.

Taking down point wiring with aluminium / copper conductor cable of any size drawn through rigid conduit / casing capping etc. (surface or conduit typeconcealed) including accessories etc. complete all as specified & directed

M&L concealed conduit wiring with 1.5 sqmm (Nominal area) with two runs of single core PVC insulated stranded unsheathed copper conductor FRLS cable upto and including 1100 V grade drawn through PVC rigid conduit fixed to wall / ceiling etc incl 1.5 sqmm (nominal area) single core, PVC insulated stranded unsheathed copper conductor FRLS cable as earth wire and duly connected to common earth point complete all as specified and directed . (Note :-(i) PVC rigid conduit with all fittings/accessories shall be measured and paid separately. (ii) Two runs of 1.5 sqmm single core cable and one run of 1.5 sqmm earth continuity wire to be measured as one length. (iii) Cutting chases for conduit & making good to wall shall be measured and paid separately)

M&L concealed conduit wiring with 6 sqmm (Nominal area) with two runs of single core PVC insulated stranded unsheathed copper conductor FRLS cable upto and including 1100 V grade drawn through PVC rigid conduit fixed to wall / ceiling etc incl 6.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed copper conductor FRLS cable as earth wire and duly connected to common earth point complete all as specified and directed . (Note :-(i) PVC rigid conduit with all fittings/accessories shall be measured and paid separately. (ii) Two runs of 6.0 sqmm single core cable and one run of 6.0 sqmm earth continuity wire to be measured as one length. (iii) Cutting chases for conduit & making good to wall shall be measured and paid separately)

M&L concealed conduit wiring with 10 sqmm (Nominal area) with four runs of single core PVC insulated stranded unsheathed copper conductor FRLS cable upto and including 1100 V grade drawn through PVC rigid conduit fixed to wall / ceiling etc incl 10.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed copper conductor FRLS cable as earth wire and duly connected to common earth point complete all as specified and directed . (Note :-(i) PVC rigid conduit with all fittings/accessories shall be measured and paid separately. (ii) Four runs of 10.0 sqmm single core cable and one run of 10.0 sqmm earth continuity wire to be measured as one length. (iii) Cutting chases for conduit & making good to wall shall be measured and paid separately)

Supply only 20 mm dia medium grade PVC rigid conduit with all fittings and accessories of PVC RIGID CONDUIT (like Tee, bend etc.) complete all as specified and directed.

Supply only 25 mm dia medium grade PVC rigid conduit with all fittings and accessories of PVC RIGID CONDUIT (like Tee, bend etc.) complete all as specified and directed.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc. in brick walls and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth complete all as specified & directed.

Supply and fix flush to wall 220V AC, 50HZ, single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps complete all as specified and directed including taking out old one

Supply and fix in flush to wall Factory made board distribution in sheet steel enclosure with 200 Amps rated bus bar, TPN DB, double door type, 4 way complete all as specified and directed..

S & F switch piano, flush type, 5/6 Amps, 240 Volts, single pole, one way, conforming to IS complete all as specified and as directed.

Supply and fix in flush to wall 1.6 mm thick pressed mild steel terminal boxes of 100mm x 100mm size, with 3 mm thick PVC / Plastic laminated sheet. top cover of suitable sizes fixed with brass screws and washers etc. for mounting switches, complete all as specified and directed

S&F SP MCB 6 to 32 Amps 'C' Curve complete all as specified and directed.

S&F TPN MCB 63 Amps 'C' Curve complete all as specified and directed

S&F LED street light fittings 45 Watt, 220 V, AC, high efficiency complete with driver, holders & LED lamp with all accessories complete with 40mm dia GI tubing light grade 1.2 mtr long bent to shape fixed with suitable size of clamps/nut/bolts washers for fixing of bldg security light fittings and connect electrically with PVC twin twisted copper flexible wire of size 23 /.0076 flexible wire complete all as specified and directed including taking down unserviceable one.

Removal of split AC indoor and outdoor units and refixing after repair of wall / ceiling including gas charging as per site requirement complete including replacement of outdoor unit mounting stand complete all as sepcified and directed.

Sai Sri Constructions

CIVILEC ENGINEERING WORKS

Pavan Commercial Company

SRI SIMHADRI COMPANY