PROVN OF SOLAR POWER LIGHTS AND HIGH MAST LIGHTS ALONGWITH ASSOCIATED WORKS AT CERTAIN LOCATIONS AT AF STN BAREILLY

Amount

Supply, fixing, Installation and testing All-in-One LED Solar street light fitting of capacity 47 watt Supply of integrated All-in-One Solar LED Streetlight luminaire consisting of solar panel, battery, PIR Sensor and charger built into the luminaire, with minimum system lumen output of 8500 lumens. System efficacy should be ≥180lm/W. Wattage of luminaire should not exceed 48W. Luminaire should have minimum panel capacity of 60Wp Mono and LiFePo4 battery capacity of minimum 12.8V 30AH. AIO luminaire should be with PIR sensor with suitable dimming profile to ensure autonomy of 2 nights. The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution. Luminaire should be IP65 protected, IK 08 impact resistance certified with corrosion proof extruded aluminum housing. LiFePO4 battery should be of minimum 2000 cycle life class. Panel type : Mono Crystalline Panel with solar module efficiency≥17% for faster charging. Charge controller should be MPPT type, dusk to dawn operation. LM80 and LM79 report from 3rd party NABL accredited lab must be submitted along with the bid.The product shall comply to IEC60598-2-3 for Safety of Luminaire for Road and Street Lighting, IEC 62109-1 for Safety of Power Converters used in solar Panel Equipment, IEC 62133 & UL1642 for Safety of Lithium Ferro Phosphate Battery and IEC 61730-1,2 & IEC 61215 for Safety of Solar Panel Module, complete all as specified and directed. Make: BRP111 LED85/757 G2 of Philips or equivalent in CG/Bajaj.

Supply and fixing of 6m octagonal Pole with double arm. Material for pole section: Hot rolled MS pole equivalent to IS 2062, Gr.- E350,A BS EN 10025 Gr. S355JO /, Metal protection- HOT DIP GALVANIZED AS PER IS 4759 / IS - 2629 and metal base plate 6. MATL: BASE PL.- AS PER IS 2062, Gr E250,A. Bottom (O.A.F.) 135mm and top (O.A.F.) 70mm. Size of Base Plate: 260 SQ, thickness of base plate should be minimum 16mm, hole PCD 260, hole dia(slot) Ø28 X 50. Tolerance on material thickness as per IS:1852/85. pole shall be hot dip galvanized as per IS 2629. prices-Signify 6mtr. octagonal pole with single arm of 1000mm length and nut-bolts for foundation of length as per recommended by Manufacturer including provision of manualy ON/OFF switch on the Pole, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in any type of soil for laying of cables/ LT cables and stay assembly all as specified and directed .

Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in pole foundation, filling and mass concrete complete all as specified and directed.

M & L for providing plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate), as in pole coping and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work complete all as specified and directed.

Supply,fixing, Installation and testing complete for High galvanized mast light including 09 Nos LED Flood light fittings of capacity 300 watt as per manufacturer symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with motor with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation with nut-bolts as 20 Meter height with timer control panel & all other item complete all as specified and directed.

Supply,fixing, installation and testing complete for High galvanized mast light including 09 Nos LED Flood light fittings of capacity 300 Watts of philips as per manufacturer symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with motor with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation as 15 Meter height with timer control panel & all other item compete all as specified and directed.

Supply and laying or fixing or passing through pipe of following size of 1100 Volts grade heavy duty XLPE armourade cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed nominal cross section stranded conductor complete all as specified and directed for the following Size.

35 Sqmm 3.5 core

25 Sqmm 3.5 core

M&L for dry sand cushioning to underground cables with 8 cm thick before laying of cables and 15cm thick after laying and stretching of cable all as specified and directed.

Supply and Laying well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete all as specified and directed.

Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

M & L for 40 mm dia of Tubes light grade galvanised with all fittings laid in trenches or inserting in horizontal boring complete all as specified and directed.

M&L for Horizontal Boring or cutting in hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes of 40mm bore and making good the disturbed surface as was before complete all as specified and directed.[Note: GI pipe will be measured and paid separately]

M&L for earthing complete with galvanized earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground vertically at a depth not less than 2.25 mtrs below normal ground level with top edge of earth plate at a depth not less than 1.5 mtrs below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized iron strip 32 mm x 6 mm by means of bolts, nuts, check nuts and washers made of galvanized iron and protected by light grade 40 mm bore GI pipe upto test point or main control board and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit in 1:3:6 type C-2 (using 40 mm grade stone aggregate) including excavation and earth work in any type of soil, returning filling in soil and disposal of surplus soil to a distance not exceeding 50 mtrs all as specified and shown on plate No 05 of SSR Part-I Earthing complete all as specified and directed. Note - Galvanised Earth plate electrode of 600mmx600mmx6mm should be covered/surrounded by 15cm layers by charcoal and salt.

S&F MCCB 4 Pole 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA. 430 V and 50 Hz complete all as specified and directed.

Supply, installation, testing and commissioning LT Feeder/Junction Box factory made CPRI approved and tested, double door outdoor type cubical,platform mounted,dust and vermin proof made out of 100cmx100cmx40cm in size 3 mm thick CRCA sheet with front openable hinged shutter and locking arrangement duly supported with 40 X 40 X 6 mm MS Angle iron and 50X 6 mm MS flat iron frame with Copper Buss Bar of size 32X6 mm of 400 Amp capacity fitted on insulators with all connected items etc all as required duly fabricated and powder coated of approved shade complete and with cable entry box with necessary cable glands for incoming and outgoing cables and mounting on the floor complete comprising the following items complete set with all connected items:- Incoming MCCB of Capacity 100 Amp TPN 36 KA-01 No Outgoing MCCB of Capacity 63 Amp TPN 36 KA-02 No AL Buss Bar of size 32X6mm of 400 Amp capacity 6/8 Way fitted on insulators A-Meter/V-Meter and LED Indicator (RYB) indicator lamps-One Set Insulator 12 Nos Nut & bolts

R D Bansal (BID ID -3487622)

UNITED ENGINEERING CORPORATION (BID ID -3487840)

D K THUKRAL AND SONS (BID ID -3485653)

RAMSONS DEVELOPERS (BID ID -3484629)

M/S ARORA ENTERPRISES (BID ID -3486661)

R.S ENGINEERING TRADERS (BID ID -3487464)