Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.4 LAccepted-AOC | 1 | Accepted-AOC Lowest rate quoted | |
| 2 | Rejected-Technical | - | Rejected-Technical Comparitively higher rate |
Tender Value
₹10.8 L
EMD Value
₹26,905
Closing Date
12 Aug 2021, 4:00 pmClosed
Secretary
thiruvilwamala grama panchayath, thiruvilwamala p.o, thrissur 680588
construction of anganwadi ( 2 numbers)
2021_DP_430792_1
01/2021-22
Open Tender
Raw Materials
Item Rate
15 days
Thiruvilwamala panchayath
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,152
Yes
₹26,905
Yes
2 Sept 2021
17 Jul 2021
16 Aug 2021
17 Jul 2021
12 Aug 2021
19 Jul 2021
Amount
Stone for masonry work
Portland Cement
Coarse sand (zone III)
Stone Aggregate(single size): 40 mm nominal size
Stone Aggregate(single size):20 mm nominal size
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Solid blocks of size 30x20x15cm
Stone Aggregate(single size): 10 mm nominal size
Twisted steel/deformed bars
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable telescopic prop 3 m (2.02-3.75m)
Beam clamp 300-380 mm (450-1070 mm)
Second class kail wood in planks
Second class kail wood in scantling
Hollock ballies 125 mm diameter
Adjustable span ESO+SI (2.35-3.40)
Anjili wood scantls
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 20 mm
Anjili wood planks
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile
35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm
Mild Steel round bar above 12 mm dia
Flats up to 10 mm in thickness
200 mm Aluminium aldrop
Anodised Aluminium handles 125 mm with plate 175 x 32 mm
Chromium plated Brass screws 25 mm
Iron hooks & eyes 100 mm
Anodised Aluminium tower bolt (barrel type)300x10 mm
Chromium plated Brass screws 30 mm
Fine sand (zone IV)
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
Acrylic exterior paint
Exterior primer
Plastic emulsion paint
Pink primer (for wood)
Synthetic enamel paint in black or chocolate shade
Vitrified floor tile 60x60 cm
High polymer modified quickset tile adhesive
Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
Polyethylene water storage tank with cover and suitable locking arrangemnet
Vitreous china flat back wash basin 550x400 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
C.I. bracket for wash basin and sinks
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
Vitreous China orrisa type w.c. pan size 580 mm
Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
100 mm S.C.I. trap with vent heel
PVC pipe 63 mm outer dia . 6kgf/cm2
PVC pipe 110 mm outer dia. 4kgf/cm2
PVC pipe 25 mm outer dia. 10kgf cm2
VAVACHAN JOSEPH
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .