Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 LAccepted-AOC AIKKARANAD G P 2024 25 P NO 245 KADAMATTOM SCHOO IMAINTENANCE WARD 7 | ERNAKULAM | KERALA | 680667 | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | murimakkil L2 | Sooraj P.R L1 |
|---|---|---|---|---|---|
| 1.00Renovation work | |||||
| 1.00 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 230 | kg | 125 ₹28,750 | 120 ₹27,600 Lowest |
| 1.00 | OD230881/2025-2026:Designing, fabricating, testing, installing Curtain Wall with
Aluminium Composite Panel Cladding, with open grooves for linear as well as
curvilinear portions of the building , for all heights and all levels etc. including: Providing,
fabricating and supplying and fixing panels of aluminium composite panel cladding including aluminium base frame work in pan shape in metalic colour of
approved shades made out of 3mm thick aluminium
composite panel material . The aluminium composite panel
cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based
fluoropolymer resin coating of approved colour and shade on face # 1 and polymer
(Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts,
washers, cleats, weather silicone sealant, backer rods etc. with aluminoum composite panel claddding till the handing over of the building for occupation. The Contractor shall provide
curtain wall with aluminium composite panel cladding, having all the performance
characteristics all complete , as per the Architectural drawings, as per item description,
as specified, as per the approved shop drawings and as directed by the Engineer-inCharge. However, for the purpose of payment, only the actual area on the external face
of the curtain wall with Aluminum Composite Panel Cladding (including width of
groove) shall be measured in sqm. up to two decimal places. | 37.35 | sqm | 2,900 ₹1,08,329.5 Lowest | 3,000 ₹1,12,065 |
| 1.00 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 38.28 | kg | 545 ₹20,862.6 Lowest | 800 ₹30,624 |
| 1.00 | 14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . | 21.46 | sqm | 250 ₹5,365.75 Lowest | 350 ₹7,512.05 |
| 1.00 | OD215607/2025-2026:Supplying and Fitting Stainless steel (grade 304) 3D Lettering MALAYALAM of size 20-25 cm, 30mm projection etc complete as per direction of Engineer in charge at site OD 78/21-22 | 25 | each | 1,005 ₹25,125 Lowest | 1,100 ₹27,500 |
| 1.01 | OD215651/2025-2026:Providing and laying 60 mm thick factory made Cement Concrete interlocking paver blocks of M-30 grade made by block making machine with strong vibratory compaction in of approved size design & shapes laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate ,etc al complete as per the direction of Engineer in charge | 485.69 | sqm | 962 ₹4,67,228.97 | 930 ₹4,51,687.05 Lowest |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.67 | cum | 8,200 ₹21,869.4 | 7,000 ₹18,669 Lowest |
Tender Value
₹7.6 L
EMD Value
₹19,055
Closing Date
29 Aug 2025, 12:00 pmClosed
Assistant Engineer LID EW Section Maneed
Office of Assistant Engineer LID EW Section Maneed
Renovation of Maneed LP School in Maneed GP
2025_LSGD_788664_1
10/AE/LSGD/MND/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Office of Assistant Engineer LID EW Section Maneed
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,685
Yes
₹19,055
Yes
19 Sept 2025
20 Aug 2025
30 Aug 2025
20 Aug 2025
29 Aug 2025
20 Aug 2025
20 Aug 2025 - 29 Aug 2025
Amount
Renovation work
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
OD230881/2025-2026:Designing, fabricating, testing, installing Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding including aluminium base frame work in pan shape in metalic colour of approved shades made out of 3mm thick aluminium composite panel material . The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. with aluminoum composite panel claddding till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-inCharge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).
14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .
OD215607/2025-2026:Supplying and Fitting Stainless steel (grade 304) 3D Lettering MALAYALAM of size 20-25 cm, 30mm projection etc complete as per direction of Engineer in charge at site OD 78/21-22
OD215651/2025-2026:Providing and laying 60 mm thick factory made Cement Concrete interlocking paver blocks of M-30 grade made by block making machine with strong vibratory compaction in of approved size design & shapes laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate ,etc al complete as per the direction of Engineer in charge
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
murimakkil (BID ID -2310578)
Bidder Name
murimakkil
Sooraj P.R
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1298423.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .