Development of Shri Tulshishyam Yatradham, Ta. Una Dist. Gir- Somnath(2nd attempt)

Name of Work: Development of Shri Tulshishyam Yatradham Ta. Una Dist. Gir- Somnath

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Clearing and grubbing road land including uprooting rank vegetation grass Rupees Twenty Eight

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier Thousand Four Hundred

and disposal of unserviceable materials (C) By mechanical means in area of light jungle Fifty Five And Paise Nine

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas Rupees Fifty One And

and disposal of unserviceable materials with all lead and lift. Paise Forty Four Only

Scraping oil paint from steel and other metal surface and making the surface even (with Rupees Fifty Four And

Hand Scraping.) Paise Twenty Four Only

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C

Rupees Twenty And Paise

4 669.00 member including stacking of serviceable material and disposal of unserviceable from site smt 20.83

Eighty Three Only

of work with all lead and lift

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of

Rupees Fifty One And

5 372.00 serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) smt 51.44

Paise Forty Four Only

G.I.sheet roofing.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats Rupees Two Hundred

6 25.00 architraves, holdfasts and other attachment etc. complete and stacking them within all Each 201.23 One And Paise Twenty

lead and lift.(i) Not exceeding 3 Sq.M. in area. Three Only

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps Rupees Eighty And Paise

including stacking the materials with all lead and lift ( for any dia, of pipe) Thirty Two Only

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing Rupees Four Hundred

8 10.00 tank etc. including stacking the materials with all lead and lift. Nos 433.95 Thirty Three And Paise

Ninety Five Only

Demolition including stacking of serviceable materilas and disposal of unserviceable Rupees One Thousand

materials with all lead and lift. (i) R.C.C. work One Hundred Thirty

Three And Paise Eighty

Demolition of Brick work and stone masonry including stacking of serviceable materilas and Rupees Five Hundred

10 43.00 disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. Cum 589.69 Eighty Nine And Paise

Sixty Nine Only

Excavation for foundation upto 1.5 m depth including sorting out and stacking of Rupees Two Hundred

11 2160.00 useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Cum 281.72 Eighty One And Paise

Murrum Seventy Two Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and Rupees Three Hundred

12 186.00 stacking of useful materials and disposing off the excavated stuff upto 50 Meter Cum 314.30 Fourteen And Paise

lead. (D) Soft rock not requiring Blasting Thirty Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and Rupees Six Hundred

13 168.00 stacking of useful materials and disposing off the excavated stuff upto 50 Meter Cum 682.26 Eighty Two And Paise

lead.(E) Hard Rock Twenty Six Only

Earthwork in cutting including preparing the slope and camber andstacking or utilising the Rupees Two Hundred

14 3857.00 cutting stuff in bank as directed upto 200 Meters from the end of cutting with all lead and Cum 272.97 Seventy Two And Paise

lift.(i) Hard murrum. Ninety Seven Only

Carting & carriage Loading - unloading of excavated earth up to 15 km to 25 km from out Rupees Two Hundred

15 145.00 side campus with all lead & lift as per Directed Engineer in Charge Cum 222.77 Twenty Two And Paise

Seventy Seven Only

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

Rupees One Hundred

foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited

16 4858.81 Cum 137.47 Thirty Seven And Paise

layer by ramming and watering.

Forty Seven Only

Filling in plinth with sand under floors including watering ramming, consolidating and Rupees Four Hundred

17 121.00 dressing complete Cum 496.76 Ninety Six And Paise

Seventy Six Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Rupees Three Hundred

18 1325.00 including watering, ramming and consolidating etc. complete. Cum 307.41 Seven And Paise Forty

Rolling and consolidation of soling including filling in depression which occur during the

Rupees Twenty Two And

19 5142.00 process, with power roler 8 tonne to 12 tonne. Smt 22.74

Paise Seventy Four Only

Applying general insecticide pest control treatment to floors, cupboards etc including

labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part-II( (0.075%

concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of water Rupees Forty And Paise

application 0.5 litre chemical /Sqm of surface is recommended as per I.S Ninety Five Only

Providing and laying cement concrete 1:3:6 (1- Cement :3- Coarse sand : 6- Graded brick bat

Rupees Three Thousand

aggregate 40mm normal size) and curing complete including cost of formwork in (A)

21 653.00 Cum 3 089.19 Eighty Nine And Paise

Foundation and Plinth

Providing and laying controlled cement concrete M.150 for curing complete including cost Rupees Four Thousand

of formwork and reinforcement for reinforced concrete work in Foundations, footings,Base One Hundred Thirty

of columns and Mass concrete. Three And Paise Ninety

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

Rupees Five Thousand

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Five Hundred Seventy

23 250.00 required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Cum 5 574.19

Four And Paise Nineteen

setting of concrete, improve workability as per direction of engineer in charge and approved

, rates includes all levels , heights as specified , excluding reinforcement : (A) Footing

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Eight Hundred Eighty

24 46.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 883.46

Three And Paise Forty Six

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Column FOR up to Plinth

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Eight Hundred Eighty

25 71.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 883.46

Three And Paise Forty Six

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Column FOR Ground Floor

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Nine Hundred Twenty

26 31.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 925.42

Five And Paise Forty Two

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Column First Floor

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Nine Hundred Sixty

27 6.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 967.39

Seven And Paise Thirty

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Column for Second Floor

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Eight Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

One Hundred Thirty Five

28 1.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 8 135.25

And Paise Twenty Five

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Column for Third Floor

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Rupees Seven Thousand

29 147.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 217.46 Two Hundred Seventeen

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, And Paise Forty Six Only

shuttering, formwork staging scaffolding work in Plinth Beam .

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Two Hundred Twenty

30 92.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 224.53

Four And Paise Fifty

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Floor beam for Ground Floor

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Two Hundred Sixty Six

31 25.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 266.28

And Paise Twenty Eight

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Floor beam for First Floor

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Rupees Seven Thousand

32 3.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 308.24 Three Hundred Eight And

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, Paise Twenty Four Only

shuttering, formwork staging scaffolding work considering for Floor beam for Second

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Nine Hundred Twenty

33 156.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 922.44

Two And Paise Forty Four

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for at Ground Floor (c) For

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Nine Hundred Sixty Four

34 39.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 964.49

And Paise Forty Nine

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for First Floor (c) For Floor

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Rupees Eight Thousand

35 5.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 8 006.46 Six And Paise Forty Six

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, Only

shuttering, formwork staging scaffolding work considering for Second Floor(c) For floor

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Four Hundred Seventy

setting of concrete, improve workability as per direction of engineer in charge and approved And Paise Ninety Seven

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, Only

shuttering, formwork staging scaffolding work considering for Stair Case for GF TO FF

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

37 4.00 Cum 7 512.51 Five Hundred Twelve And

setting of concrete, improve workability as per direction of engineer in charge and approved

Paise Fifty One Only

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Stair Case for FF TO SF

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Rupees Seven Thousand

38 32.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 463.90 Four Hundred Sixty Three

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, And Paise Ninety Only

shuttering, formwork staging scaffolding work considering for Lintel for GF

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Rupees Seven Thousand

39 6.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 505.42 Five Hundred Five And

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, Paise Forty Two Only

shuttering, formwork staging scaffolding work considering for Lintel for FIRST FLOOR

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Five Hundred Forty Seven

40 1.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 547.38

And Paise Thirty Eight

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Lintel for SECOND FLOOR

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Rupees Seven Thousand

41 21.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 181.10 One Hundred Eighty One

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, And Paise Ten Only

shuttering, formwork staging scaffolding work considering for Chajja for GF

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Two Hundred Twenty

setting of concrete, improve workability as per direction of engineer in charge and approved Two And Paise Ninety

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, Five Only

shuttering, formwork staging scaffolding work considering for Chajja for FF

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

Two Hundred Sixty Four

43 1.00 setting of concrete, improve workability as per direction of engineer in charge and approved Cum 7 264.91

And Paise Ninety One

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for Chajja for SF

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Eight Hundred Sixty Five

setting of concrete, improve workability as per direction of engineer in charge and approved And Paise Ninety Five

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, Only

shuttering, formwork staging scaffolding work considering for RCC WALL for GROUND

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard,

45 4.00 Cum 7 907.91 Nine Hundred Seven And

setting of concrete, improve workability as per direction of engineer in charge and approved

Paise Ninety One Only

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering,

shuttering, formwork staging scaffolding work considering for RCC WALL for FIRST FLOOR

Providing and laying in position control cement concrete mix M-300 grade for reinforced

cement concrete work , using cement content as per approved design mix including

pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if Rupees Seven Thousand

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, Nine Hundred Forty Nine

setting of concrete, improve workability as per direction of engineer in charge and approved And Paise Eighty Eight

, rates includes all levels , heights as specified , excluding reinforcement .rates for centering, Only

shuttering, formwork staging scaffolding work considering for RCC WALL for SECOND

Providing and Laying controlled Cement Concrete M-200 and curing etc. Complete including

Rupees Four Thousand

the cost of form work but excluding the cost of reinforcement for R.C.C. work at Ground

47 97.00 Cum 4 963.14 Nine Hundred Sixty Three

Floor (c) For Grad Slab

And Paise Fourteen Only

Providing CRS Bar (Corrosion Ressitance Steel Bars) Reinforcement confermed to IS-1786 FE-

Rupees Eighty One And

48 154360.00 500D for R.C.C. work including bending, binding and placing in position complete upto floor Kg. 81.44

Paise Forty Four Only

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

White Stone Bela mesonry block in course in superstructure with stone of approved quality

Rupees Six Thousand Six

in Lime Mortar 1:6 (1-Cement : 6- course sand) including packing the joints etc. complete.

49 105.00 Cum 6 671.13 Hundred Seventy One

And Paise Thirteen Only

White Stone Bela mesonry block in course in superstructure with stone of approved quality

Rupees Six Thousand Six

in Lime Mortar 1:6 (1-Cement : 6- course sand) including packing the joints etc. complete)

50 264.00 Cum 6 671.13 Hundred Seventy One

And Paise Thirteen Only

White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement Mortar Rupees Seven Hundred

51 309.00 1:4 ( 1- Cement : 4- course sand) GROUND FLOOR Sqm 708.40 Eight And Paise Forty

White Stone Bela mesonry block in course in superstructure with stone of approved quality

Rupees Six Thousand Six

in Lime Mortar 1:6 (1-Cement : 6- course sand) including packing the joints etc. complete)

52 65.00 Cum 6 671.13 Hundred Seventy One

And Paise Thirteen Only

White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement Mortar Rupees Seven Hundred

53 206.00 1:4 ( 1- Cement : 4- course sand) First FLOOR Sqm 708.40 Eight And Paise Forty

White Stone Bela mesonry block in course in superstructure with stone of approved quality

Rupees Six Thousand Six

in Lime Mortar 1:6 (1-Cement : 6- course sand) including packing the joints etc. complete)

54 32.00 Cum 6 671.13 Hundred Seventy One

And Paise Thirteen Only

White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement Mortar Rupees Seven Hundred

55 29.00 1:4 ( 1- Cement : 4- course sand) Second FLOOR Sqm 708.40 Eight And Paise Forty

Uncoursed Rubble Masonry with hard stone of approved quality in foundations and plinth Rupees Two Thousand

in Cement Mortar 1:6 (1-cement : 6-coarse sand including levelling up etc. complete Five Hundred Ninety

Nine And Paise Eight

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for

Rupees One Hundred

interior plastering upto floor two level and finished even and smooth in (i)Cement mortar

57 1869.00 Sqm 188.46 Eighty Eight And Paise

1:4 (1-cement:4-sand) Ground Floor

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for

Rupees Two Hundred

interior plastering upto floor two level and finished even and smooth in (i)Cement mortar

58 362.00 Sqm 215.76 Fifteen And Paise

1:4 (1-cement:4-sand) First Floor

Seventy Six Only

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for

Rupees Two Hundred

interior plastering upto floor two level and finished even and smooth in (i)Cement mortar

59 48.00 Sqm 243.06 Forty Three And Paise Six

1:4 (1-cement:4-sand) Second Floor

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or

Rupees Two Hundred

half brick walls for interior plastering upto floor two level and finished even and smooth in

60 1972.00 Sqm 233.25 Thirty Three And Paise

(i) Cement mortar 1:4 (1-cement:4-sand) Ground floor

Twenty Five Only

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or

Rupees Two Hundred

half brick walls for interior plastering upto floor two level and finished even and smooth in

61 792.00 Sqm 258.28 Fifty Eight And Paise

(i) Cement mortar 1:4 (1-cement:4-sand) First floor

Twenty Eight Only

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or

Rupees Two Hundred

half brick walls for interior plastering upto floor two level and finished even and smooth in

62 146.00 Sqm 283.31 Eighty Three And Paise

(i) Cement mortar 1:4 (1-cement:4-sand) Second floor

Thirty One Only

Providing cement vata (10 mm. x 10 mm. size) quarter round in cement mortar 1:1 including

Rupees Twenty Four And

63 479.00 neat cement finishing, watering etc. complete. Rmt 24.28

Paise Twenty Eight Only

Providing 20 mm thick double coat mala cement vplaster on interior brick / concrete work

for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Rupees Two Hundred

64 3829.00 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 Sqmt 290.71 Ninety And Paise Seventy

(1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete. One Only

Providing and applying 2mm thick Texture Plaster of Earthen Textures, Travertino Texture,

Coral texture or equivalent make incorporating fine filaments made of polymer and

Rupees Four Hundred

aggregating natural stone powder with making grooves on existing base coat of 20 mm

65 3563.00 Sqmt 443.39 Forty Three And Paise

thick smooth mala plaster etc. Complete Exterior weather proof two coat paint in any

Thirty Nine Only

shade as approved by Architect/ Engineer in charge for all floor all height.

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag

of cement for all floors on brick / concrete wall work using water proofing materials in C M

1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting coat of neat cement slurry Rupees Two Hundred

66 236.00 etc complete for all floor. and shall be guaranteed for minimum period of 10 years after Sqmt 299.97 Ninety Nine And Paise

handing over the completed building by the main contractor to be finished as directed. Ninety Seven Only

Stamp paper guarantee 10 years to be furnished before receiving any payment from the

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing 1 CM X 1 CM groove/notch in plaster including finishing the same etc.complete

Rupees Twenty Eight And

67 992.00 for all height. Rmt 28.28

Paise Twenty Eight Only

Providing and filling cinder inlcuding watering and consolidation etc complete. Rupees Four Hundred

68 15.00 Cum 464.60 Sixty Four And Paise Sixty

Applying two coats of putty & two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly brushing the surface free from

Rupees Forty And Paise

69 5189.00 mortar dropping and other foreign matter and sand papered smooth. Sqmt 40.59

Fifty Nine Only

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture

on undecorated Ceiling surface to give an even shade including throughly brushing the

Rupees Ninety Two And

70 5189.00 surface free from mortar droppings and other foreign matter and sand papered smooth and Sqmt 92.57

Paise Fifty Seven Only

colour approved by architect.

Finishing wall with weather proof exterior acrylic emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to remove all Rupees One Hundred

71 3829.00 dirt, and remains of loose powdered materials.etc complete olour and shade approved by Sqm. 122.13 Twenty Two And Paise

architecture. Thirteen Only

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Rupees One Thousand

adhesive material including dismentaling of existing flooring and jointed with color cement Four Hundred Seventy

slurry including finised with flush pointing & cleaning the surface etc. complete for antiskid Two And Paise Ninety

Full body vitrified tiles flooring as approved by architect or Engineer in charge. One Only

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Rupees One Thousand

adhesive material including dismentaling of existing flooring and jointed with color cement Three Hundred Seventy

slurry including finised with flush pointing & cleaning the surface etc. complete Soluble salt One And Paise Eighty Six

vitrified tile flooring for light shade/ dark shade as approved by architect or Engineer in Only

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of steps

Rupees One Thousand

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

Five Hundred Thirty One

74 173.00 finishing with flush pointing in white cement& cleaning the surface etc. complete Soluble sqm 1 531.81

And Paise Eighty One

salt vitrified tile flooring for light shade/ dark shade as approved by architect or Engineer in

Providing and laying Antiskid Ceramic tiles of 450mm x600 mm / 600mm X 600 mm 6mm

thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 Rupees Nine Hundred

75 175.00 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement selected as per Sqm 943.15 Forty Three And Paise

attached detail architectural drawing and materal selection list as approved by architect. Fifteen Only

Providing and laying white glazed tiles 300x600 mm 6mm thick in skrting risers of steps and Rupees One Thousand

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white One Hundred Twenty

cement slurry selected as per attached detail architectural drawing no.09 and materal Seven And Paise Forty

selection list. Eight Only

Providing and laying coloured glazed tiles of the size 450 mm x 600 mm x 8 mm / 600 mm x

Rupees One Thousand

600 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1

77 750.00 Sqm 1 559.09 Five Hundred Fifty Nine

cement : 3 coarse sand) & jointed with white cement slurry as approved by architect.

And Paise Nine Only

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse Rupees One Thousand

78 1086.00 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade Sqm 1 019.39 Nineteen And Paise

of slab including rubbing and polishing etc. complete. (A) 25mm thick Thirty Nine Only

Providing and fixing Sand which type Granite platform including supplying and fixing granite

stone 18 mm thick mirror polished 1st quality Granite stones in top and side posiition and Rupees Four Thousand

vertical strip at front over 25 mm thick polished kotah stone platform fixing in top and Nine Hundred Twenty Six

sides and itermediates supports fixing with cement mortar and adhesivee and finishing And Paise Seventy Eight

including cutting for fixing of sink any size (as directed by engineer incharge) at required Only

position etc complete.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

Rupees Three Hundred

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of

80 1090.00 Sqm 355.21 Fifty Five And Paise

neat cement. (B) 50mm thick.

Twenty One Only

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using white cement including

Rupees Eight Hundred

rounding off junctions and extending them upto 15 cm along the wall,clearing with water

81 1050.00 Sqm. 828.95 Twenty Eight And Paise

and oxalic acid etc. as directed. Providing and mixing water proofing materials in cement

Ninety Five Only

mortar in proportion recommended by the manufacturer.

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and laying 16-18 mm thick polished granite stone machine cut in single piece

(Max. available) in sill and jambs of door ,window,ventilation & lift wall cladding,staircase

flooring landing, risers & treads, skirting laid over 10 mm thick cement mortar 1 : 3 (1 Rupees Two Thousand

cement : 3 coarse sand) and jointed with grey cement slurry with matching pigment incl. Eight Hundred Fifty Eight

rubbing and polishing, half rounding edge and incl. fixing of hilty fastener at every 1/3 span And Paise Fifty Seven

of sill as required size etc. complete colour and shed as approved by architect engineer in Only

Providing and laying 19mm x 25mm round ,'D' edge and polished granite pencil patti on top,

with cement paste and including backing coat in C.M. 1:4. All joints filled with colour / Rupees Three Hundred

epoxy grout and wiped to give sharp joints with flush pointing and washed clean with acid Four And Paise One Only

Providing and fixing main door 50mm.th. double shutter specially designed hollow door

made out of 7.5x5 cm.t.w. frame work with 6mm.th. waterproof ply and lamination over it,

Rupees Six Thousand Five

on both the sides, colour pattern and design of which is to be approved by the architect.

84 31.00 Sqm. 6 555.02 Hundred Fifty Five And

doors shall be provided with pivot and 60 cm. long stainless steel handles as/detail. as per

attached detail architectural drawing.

Providing and fixing Single/double shuttered door having black granite frame with all open

edges machine cut & machine polished, fixed by special hinges with double shutter of

Rupees Five Thousand

mm th both side pre laminated md flushed door, from "greenply" or equivalent company. as

85 85.00 Sqmt 5 409.39 Four Hundred Nine And

per attached detail architectural drawing.

Paise Thirty Nine Only

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-

locked together through their entire length and jointed together at the ends by end locks

Rupees Three Thousand

mounted on specially designed pipe shaft with bracket plates, guide channels and

86 54.00 Sqmt 3 554.40 Five Hundred Fifty Four

arragements for inside and outside locking with push pull operation including the cost of

And Paise Forty Only

hood cover and spring etc. complete.(A) Shutters having width below 3.5 M

Toilet Cubical : @1000(W) X 1500(D) x 2000(H) mm. Supply & Installation of Toilet Cubicles

S.S. 304 Series as per approved make & selection by Architect. 12 mm Compact Grade

mm thick laminate Board of the approved shade by Architect . Accessories for cubicles.1.

Aluminum “U” Section with SS Exterior grade Finish.2. Aluminum “H” Section with SS Rupees Four Thousand

87 34.00 Exterior grade Finish.3. Aluminum Top Rail with SS Exterior grade Finish.4. SS Coat Hook ( Nos. 4 504.60 Five Hundred Four And

SS 316 )5. SS Privacy Thumb Turn ( SS 316)6. SS Door Knob ( SS 316)7. SS Hinges ( SS 316)8. Paise Sixty Only

SS Adjustable Leg ( SS 316)With Rubber lining and Screw Etc. Work complete including all

type of fittings, fixtures, tools, etc complete as per manufacturer specification and drawing.

Providing and Fixing heavy duty S.S. Door Closer as directed by Engineer In charge. Rupees Nine Hundred

88 11.00 Each 943.34 Forty Three And Paise

Thirty Four Only

Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat of

Rupees One Hundred

primer and two coat oil paint as per details given by architect instructions given by engineer

89 2620.00 Kg. 118.17 Eighteen And Paise

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size

122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x [email protected]/mt ,vertical member of size 40mm x 18mm x Rupees Two Thousand

90 30.00 1.29mm @ 0.456 kg/mt with 5 mm thick transparentbronze colour tinted float glass with Sqmt 2 140.33 One Hundred Forty And

powder coatedaluminum fittings and fixtures and transparent silicon sealant glass fixing to Paise Thirty Three Only

frame as per details etc complete for window(3 SHUTTER +1 MOSQUITO SHUTTER )With

fixed glass above as per given in detail drawing and approved By engineer in charge.

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track

member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member Rupees One Thousand

size 40 mmx18mmx1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x Five Hundred Eighty

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass Three And Paise Ninety

with powder coated aluminum fittings and fixtures and transparent silicon sealant glass Five Only

fixing to frame as per details etc (2 SHUTTER +1 MOSQUITO SHUTTER ) With fixed glass

above as per given in detail drawing and approved By engineer in charge.

Providing and fixing louvered glass windows and ventilators with alluminium section of

Rupees One Thousand

size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame

One Hundred Seventy

92 13.00 for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation selected Sqmt 1 175.55

Five And Paise Fifty Five

as per attached detail architectural drawing.

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush

finish and 304 grade as per Indian Standrd and detailed drawing including grinding, cleaning

Rupees Three Thousand

and filling the welded spots with SS railing (Only Length will be paid for payment heigth

One Hundred Seventy

93 103.00 max.1.0 mt.). The Work to be executed as per consultant drawing . 50mm dia.(16 gauge) Rmt. 3 173.42

Three And Paise Forty

TOP RAIL ,32 mm dia.(16 gauge) VERTICAL SUPPORT ,16 mm dia.(16 gauge) HORI. MEMBER

,100mm dia. x 8mm size plate

Providing and fixing in position S.S. daso by providing top 50 mm dia stain less steel pipe rail Rupees One Thousand

with starting and end point vertical post of 50 mm dia with wall/column including bending Seven Hundred Ninety

welding and fixing for staircase and balcony as directed. (testing is required of s.s 304) for Four And Paise Seventy

all floor Seven Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concealed as directed Rupees Seventy Two And

including necessary fittings etc. including testing of pipe and joints and fixing the same with Paise Sixty Four Only

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concealed as directed Rupees Ninety One And

including necessary fittings etc. including testing of pipe and joints and fixing the same with Paise Eighty Three Only

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

Rupees One Hundred

wall with the help of clamp at every two metre C/C or shall be concealed as directed

97 674.00 Rmt. 148.11 Forty Eight And Paise

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

Rupees One Hundred

wall with the help of clamp at every two metre C/C or shall be concealed as directed

98 520.00 Rmt. 195.66 Ninety Five And Paise

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal Rupees One Hundred

99 140.00 bore tube fittings and clamps including making good the wall, ceiling and floor etc. Rmt. 170.35 Seventy And Paise Thirty

complete.[A] 15 mm. Five Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

Rupees Two Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal

100 200.00 Rmt. 208.79 Eight And Paise Seventy

bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

Rupees Two Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal

101 230.00 Rmt. 253.82 Fifty Three And Paise

bore tube fittings and clamps including making good the wall, ceiling and floor etc.

Eighty Two Only

complete. [B] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

Rupees Four Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal

102 1620.00 Rmt. 447.72 Forty Seven And Paise

bore tube fittings and clamps including making good the wall, ceiling and floor etc.

Seventy Two Only

complete. [B] 40 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal Rupees Six Hundred Sixty

bore tube fittings and clamps including making good the wall, ceiling and floor etc. And Paise Fifty Eight Only

complete. [B] 50 mm.

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Rupees Four Hundred

104 20.00 No. 420.63 Twenty And Paise Sixty

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Rupees Six Hundred Sixty

105 28.00 No. 663.42 Three And Paise Forty

Providing and fixing Butterfly valves IS 13095 with ISI mark PN 1.6 of aprroved brand &

Rupees One Thousand Six

follwing internal dia including fixing in pipe lines etc.complete (A) 50 mm Dia

106 15.00 No. 1 675.59 Hundred Seventy Five

And Paise Fifty Nine Only

Providing and fixing special type clamping system made out from C patti, Z patti, L Clamp , U

clamp with Nut/ Bolt and washer as suitable arrangement for water supply and plumbing

Rupees One Hundred

system like Drainage Line , Rain Water line and supply line for Hot and Cold water etc line

107 60.00 Nos. 160.59 Sixty And Paise Fifty Nine

fitting from GF to 2nd Floor required as per site condition for fixing etc complete. 15 to

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and fixing special type clamping system made out from C patti, Z patti, L Clamp , U

clamp with Nut/ Bolt and washer as suitable arrangement for water supply and plumbing

Rupees One Hundred

system like Drainage Line , Rain Water line and supply line for Hot and Cold water etc line

108 60.00 Nos. 187.86 Eighty Seven And Paise

fitting from GF to 2nd Floor required as per site condition for fixing etc complete.50 to

Eighty Six Only

Providing and fixing special type clamping system made out from C patti, Z patti, L Clamp , U

clamp with Nut/ Bolt and washer as suitable arrangement for water supply and plumbing

Rupees Two Hundred

system like Drainage Line , Rain Water line and supply line for Hot and Cold water etc line

109 80.00 Nos. 220.18 Twenty And Paise

fitting from GF to 2nd Floor required as per site condition for fixing etc complete.75 to

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low densidy, complete with special falnge compression Rupees Two Hundred

110 344.00 type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Rmt. 280.23 Eighty And Paise Twenty

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low densidy, complete with special falnge compression Rupees Three Hundred

111 535.00 type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 110mm Rmt. 339.04 Thirty Nine And Paise

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

Rupees Nine Hundred

PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every

112 1168.00 Rmt. 918.66 Eighteen And Paise Sixty

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

Rupees Eight Hundred

PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every

113 1295.00 Rmt. 834.38 Thirty Four And Paise

mm center to center or shall be concealed in walls as directed including necessary fittings

Thirty Eight Only

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing and fixing ECO Drain Pipes in including supporting the ECO Drain pipe on the Rupees Five Hundred

114 390.00 bricks at each joint including leakproof joints ECO Drain Pipe etc., complete Rmt. 580.75 Eighty And Paise Seventy

200mm dia. Five Only

Providing and fixing ECO Drain PVC Pipes in including supporting the ECO Drain pipe on the Rupees One Thousand

bricks at each joint including leakproof joints ECO Drain Pipe etc., complete Three Hundred Seventy

300 mm dia.pipe And Paise Fifty Seven

Providing and fixing PVC /SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of

Rupees Six Hundred One

the following nominal diameter of self cleansing design with C.I scread down or hinged

116 63.00 No. 601.93 And Paise Ninety Three

grating including the cost of cutting and making good the walls.

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap Rupees One Hundred

117 52.00 polished bright. (i) 15mm dia. No. 186.82 Eighty Six And Paise

Eighty Two Only

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks Rupees Three Hundred

118 52.00 and back nuts. (i) 15mm dia. Nos. 308.72 Eight And Paise Seventy

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding fittings.(A) Rupees Two Thousand

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. With Five Hundred Fifty Nine

pillar tap 15 mm dia , MI fisher union and cp brass waste pipe fixing as per approved by And Paise Thirty Four

engineer in charges . Only

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S

Rupees Eight Thousand

trap includingBjointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

Seven Hundred Seven

120 29.00 (A) vitreous China Pattern :(i) in white colour With metropole , 2 way bib cock, health No. 8 707.21

And Paise Twenty One

faucet, toilet paper holder, 2 way bib cock ,plastic seat and cover as per approved by

engineer in charges.

Providing and fixing Urinal or approved quality including conecting the Urinal with waste Rupees One Thousand

pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x Five Hundred Forty Four

260mm x 350mm With half turn flush cock and waste pipe as per approved by engineer in And Paise Twenty Nine

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and fixing 2 Nos. support arms and backrest to mount at fixed height (Model R Rupees Twenty Six

1100 -Commander or equivalent) for handicap toilet complete as recommended by the etc Thousand Five Hundred

completed as directed/ approved by engineer In charge or Architect. Seventy Seven And Paise

Providing and fixing raised toilet seat with cover for handicap toilet (Model R-35: Presalit – Rupees Twenty Four

Commander or equivalent) as recommended by the etc completed as directed/ approved Thousand Six Hundred

by engineer In charge or Architect. Seven And Paise Sixty

Providing and fixing brackets, tracks (Model R4140) with flexible feed & waste pipes for Rupees Forty Three

adjustable type wash basin complete as recommended, for handicap toilet (Make : Presalit Thousand Five Hundred

– Commander or equivalent)etc completed as directed / approved by engineer In charge or Six And Paise Seventy Six

Architect. Only

Providing erecting and fixing double coated ISI water tank of required capacity each with all

Rupees Three And Paise

125 17000.00 necessary fittings and connection etc. complete on terrace Lit 3.94

Ninety Four Only

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on

Rupees Eight Hundred

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws

126 30.00 No. 859.40 Fifty Nine And Paise

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Rupees Six Hundred

127 20.00 plugs with C.P. brass scews.(B) 600mm x 20mm size. No. 616.42 Sixteen And Paise Forty

Providing and fixing brass screw down stop tap.(A) 15mm dia. Rupees Two Hundred

128 49.00 No. 205.82 Five And Paise Eighty

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

Rupees Three Thousand

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

129 28.00 No. 3 660.75 Six Hundred Sixty And

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a

Paise Seventy Five Only

floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

Providing and fixing in position cowel went to pipes.(B) 75mm dia. Rupees Three Hundred

130 30.00 No. 393.04 Ninety Three And Paise

Providing and fixing in position cowel went to pipes.(C) 100mm dia Rupees Five Hundred

131 30.00 No. 505.17 Five And Paise Seventeen

Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size

finished with radium sticker including necessary scaffolding for fixing with epoxy material Rupees Two Thousand

132 28.00 etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are No. 2 027.97 Twenty Seven And Paise

consider as a half letter) Ninety Seven Only

Providing and constructing SOAK WELL of 3.50 m internal dia and 8 .00 depth depth internal

clear dimention including the cost of execavation,PCC 1:4:8 foundation for honey combed

masonary in C.M. 1:4 (1cement : 4 sand) , casting R.C.C. 1:2:4 (1cement : 2 sand : 4 graded

Rupees Seventy Seven

stone aggregate 20mm nominal size) top slab 12 thick with C.I. manhole cover 600mm x

Thousand Four Hundred

133 5.00 450mm size of 35 kg. weight and 75mm dia C.I. pipe 1800mm long with 75mm dia cowel Nos. 77 421.55

Twenty One And Paise

vent and filling the wall 1000mm in depth with dry brick bats including providing vata in

Fifty Five Only

C.M. 1:3 (1cement : 3 sand), curing including cost of reinforcement etc. complete as per

detailed drawing and directed by E.I.C.

Construction Septic tank inside dimention of 4.00 m in length & 2.50 m in width & 2.00 m

depth including excavating any type of soil as shown and mentioned in the

drawing,providing and laying 0.10 m thick plain cement concrete 1:3:6 ( 1 cement : 3 coarse

sand : 6 graded stone agg.) 40 mm thick IPS flooring at bottom with brick masonary 0.23 m

Rupees Seventy Eight

thick walls CM 1:5 ( 1 cement : 5 coarse sand ) and intermediate partition CM 1:4 & RCC Top

Thousand Nine Hundred

134 5.00 slabs12 cms thick in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg) including Nos. 78 961.80

Sixty One And Paise

reinforcement as per design and 15 mm thick cement plaster in CM 1:4 with floating coat

of neat cement slurry inside, top and around tank below 15 cm on ground level, Also

provide Two nos CI Manhole frame and cover of size 60 cm x 45 cm & 75 mm dia. PVC

kgf / Sq cm pressure air vent pipe in 3.00 length with cowl etc complete as per direction of

Engineer in charge.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip

Rupees Ninety One And

135 55520.00 and jack rafters, purlins conneted to common rafters and the like with one coat primer & Kg. 91.08

Paise Eight Only

two coat oil paint as per detail drawings etc. complete. in columns, beams and joists,

channels M.S. flat, Angles, Pipes, tees flats with connecting plates or angle cleats

STRUCTURAL STEEL

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of

Rupees One Hundred

Kg/cm2 UPVC Pipes and diameter of taking out service pipelines cables road infrasturcture

136 8.00 Each 181.98 Eighty One And Paise

work etc. upto 1 mtr. length for all floors/ all levels / all heights. 50 mm dia

Ninety Eight Only

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of

Rupees Two Hundred

Kg/cm2 UPVC Pipes and diameter of taking out service pipelines cables road infrasturcture

137 8.00 Each 280.23 Eighty And Paise Twenty

work etc. upto 1 mtr. length for all floors/ all levels / all heights. 75 mm dia

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of

Rupees Three Hundred

Kg/cm2 UPVC Pipes and diameter of taking out service pipelines cables road infrasturcture

138 8.00 Each 339.04 Thirty Nine And Paise

work etc. upto 1 mtr. length for all floors/ all levels / all heights. 110 mm dia

Providing and fixing 3 mm thick PVC sheets as Signage and Display of health

signs/information of required size having retro reflective letters/design as per requirement, Rupees Six Hundred Fifty

139 59.00 fixing the same through approved adhesive etc. complete work shall e carried out as per Nos. 650.44 And Paise Forty Four

instruction of Engineer-in-charge (45 x 15 cms.) (work for all the floors) Only

Supplying & installing Brass Ball Valve conforming to IS 778, of RB, Italy or equivalent. Ball Rupees Two Thousand

valve must be having screwed ends. The ball valve should be with stand with maximum One Hundred Forty

pressure up to 16 Kg/cm2. Complete job as specified & directed. 50 mm Seven And Paise Sixty

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting Rupees Two Thousand

holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) Three Hundred Twenty

600mm x 450mm x 150mm size Six And Paise Sixty Five

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

Rupees Three Hundred

30cm length,30cm height and 15cm thick of M250 grade concret as per approved design

142 2790.00 Rmt 374.92 Seventy Four And Paise

and including excavation for fixing in proper line and level,filling the joint with C:M 1:3

Ninety Two Only

(1cement:3fine sand) etc complete

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as Rupees Seven Hundred

143 2698.00 per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for Smt 708.16 Eight And Paise Sixteen

levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63- Only

2018 etc. Complete

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks,

Rupees Seven Hundred

Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer.

144 1445.00 Smt 734.18 Thirty Four And Paise

filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1)

mm thick sheet.

Place Identification Sign :-Providing and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size 150x90 cms. rectangular as per design

of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat

of epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x Rupees Twelve Thousand

145 10.00 3mm; painted with bestquality epoxy coatings in black and white bends. The details of Nos 12 341.52 Three Hundred Forty One

symbol for each board shall be as per the instruction of engineer in charge. The fixing at site And Paise Fifty Two Only

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting

Providing and fixing retro Reflective Prismatic grade Board using 2mm Aluminum / 4mm

ACP, angle iron 75 x 75 x 6mm. Descaling and degreasing the board as per requirement

using epoxyprimer epoxy paint and carrying retro reflactive process by screen painting as

directed etc. complete including transporting and fixing in C.C. 1:2:4 with necessary Rupees Twelve Thousand

146 1.00 excavation curing etc. complete as per I.R.C 67-2012 design. A warranty for 10 years for the NOS 12 310.89 Three Hundred Ten And

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor Paise Eighty Nine Only

exposure test report from third party test lab for the product offered shall be submitted by

contractor. (A) Class -C Type-11(NH/SH) retro reflective sheeting

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight

Rupees One Thousand

C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square

147 25.00 Nos 1 292.19 Two Hundred Ninety Two

mouth traps. (A) 100mm x 100mm size P type.

And Paise Nineteen Only

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each Rupees Two Hundred

148 21.00 Nos 282.16 Eighty Two And Paise

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water

proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of

size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at

Rupees Seven Hundred

mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and

149 493.00 Smt 710.96 Ten And Paise Ninety Six

perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper

tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top

coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed

GRC WORK : Providing & fixing architectural moldings profiles and other decorative elements made

out of GRC (Glass Fibre reinforced Cement) in required shape, size & thickness all as per

manufacturers specifications, such as all decorative articles should be made by using high power spray

machine, using AR Glass fiber with minimum ZrO2 16% including necessary scaffoldings for all heights,

as per approved drawings and reference images. GRC elements thickness shall be 12-15 mm. fixing

edges will be 4O TO 50 MM GRC Elements shall be fixed on RCC Structure/Brick Work/ Primary Steel Rupees Five Thousand

Structure (MS with protective coat of Red oxide/Zinc Primer Shall be Used). Hilti make GI Screw Nine Hundred Seventy

150 392.00 Fastners or equvalent, GI Thread Rods and MS cleats shall be used for fixing of GRC elements on Smt 5 977.18

Seven And Paise Eighteen

RCC/MS Primary fabricated structure. Joints shall be filled with PU sealants/ base material of GRC as Only

and where required. The quote rate shall be inclusive of all design, & shop drawing and sample mock

of all elements approval from Architect & consultant..Rate shall be inclusive of all required fabrication

work for fixing only primary strcure shall be provided as base structre only as per requirement. Mode

and method of measurement shall be in accordance with IS: 1200. Contractor shall submitt Shop

drawing for approval of Architect/ EIC before execution.

Providing and fixing brass work for kalash Execution sampe approved by Engineer in charge Rupees One Thousand Six

151 1131.00 /Architect, Kg. 1 646.30 Hundred Forty Six And

Paise Thirty Only

Proving and fixing Lampost top : 1' Height before Execution sampe approved by Engineer

Rupees Seven Thousand

in charge /Architect .

152 90.00 Nos 7 805.28 Eight Hundred Five And

Paise Twenty Eight Only

Providing and fixing C.I Manhole cover 0.60 mt x 0.45 mt size having weight not less than Rupees Nine Hundred

153 2.00 35 Kg Each 958.16 Fifty Eight And Paise

Providing & Fixing iron steps of size 500mm x 150mm x 22.5 mm and painting with two Rupees Two Hundred

154 10.00 coats of anticorrosive paint etc. complete. each 207.65 Seven And Paise Sixty

Proving & supplying Field soil and Spreading and mixing of soil & silt as per approved By Rupees Six Hundred

155 284.00 engineer In charges . Cmt 688.62 Eighty Eight And Paise

Proving & farm Yard Manure and laobur for spreading and mixing farm yard before Rupees One Thousand

156 189.00 Execution sampe approved by Engineer in charge /Architect. Cmt 1 238.06 Two Hundred Thirty Eight

And Paise Six Only

Supplying well grown shrub plants of average height 3' to 4' and planting in

300x300x300mm size pits by mixing of FYM & existing soil in ration 1:3 with soil, pesticide &

insecticides. Plant should be disease free and fungus free 8"x10" polythene bag. Plastic bag

Rupees One Thousand

or pots should be removed carefully and soil around the roots should not be dropped or

157 947.00 Smt 1 133.06 One Hundred Thirty

disturbed much. Bill shall be placed after 45 days of plantation of shrubs. Mortality rates to

Three And Paise Six Only

be inclusive. Work shall be done as shown in the drawing or as directed and approved by

EIC/Architect. The ground coverage should be dence and uniform throuout the planting

Supply and planting of tree of specified variety including excavation of pit 600x

600x600mm depth mixing of FYM & existing soil in ratio 1:3 termite treatment and planting

of plants (height 8' to 10' above bags/pots). Soil mounts 4'-8" in size. Tree plantation should

be carried on neatly accurately and with perfection as per drawing and instruction given by

EIC. Plastic bags or pots should be removed carefully and soil around the roots should not Rupees Seven Hundred

158 300.00 be dropped or disturbed much. Bill shall be placed after completion of maintenance period No 759.89 Fifty Nine And Paise

but not before stabilizing the hedges. Rates for mortality to be inclusive. Providing and Eighty Nine Only

fixing tripod made of wooden ball, height 1.5m. Top bracket to be 300x300mm leg

embedded in ground up to 300mm and to have tar coat. Work shall be done as shown in

the drawing or as directed and approved by EIC.

Lawn Grass:- Excavation the area upto the depth of 15-20 cm., Removing all excavated soil

and dump as and where directed as per instructions of Engineer-in-charge, Removing all

unwanted material like brick-bats, grass roots stumps, stone etc, breaking the clods,

Levelling the area, Providing and Mixing 20-23 cm layer of the local fertile field soil, (free

Rupees Four Hundred

from stone, grass roots etc.) mixing of fertilizer and Providing and Mixing farm yard manure

159 1894.00 Smt 461.79 Sixty One And Paise

at the rate of 3 cu.mt. per 100 sq. mt.- mixing the same with layer of soil, Levelling, Rolling,

Seventy Nine Only

Pre-planting, Watering , Trimming , all labour , tools , tackles , maintenance with 30 days or

more till the grass forms a thick lawn, etc and planting the readymade Carpet Lawn Grass in

the form of approved 30 x 30 cm size slabs etc complete as per detail specification.

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Supply and planting box hedge shrub of average height 1' to 2' by providing and fixing FYM

@ rate of 0.06 cmt/pit with soil pesticide & insecticides. Plants shoud be disease free and

fungus free in 6"x8" polythene bag. Plastic bags or pot should be removed carefully and soil

Rupees One Thousand

around the roots should not be dropped or disturbed much. Bill shall be placed after

160 947.00 Smt 1 133.06 One Hundred Thirty

completion of maintenance period but not before stabilizing the shrubs. Mortality rates to

Three And Paise Six Only

be inclusive. Work shall be done as shown in the drawing or as directed and approved by

EIC. The ground coverage should be dense and uniform throughout the planting area.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- Rupees Four Hundred

161 120.00 pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends MTR 454.95 Fifty Four And Paise

prepared for collar joints including testing of joints complete.(D) 300mm Ninety Five Only

Double Swing – 1Nos. Length – 10-15 ft. Width – 5-7 ft, Height – 9-12 ft. All round and

Rupees One Lakh(s)

rectangular pipes are GI or CR, ISI make Gauge 14 gauge, 2 coating are red oxide and final

Twenty Five Thousand

162 1.00 paint of PU/ Epoxy/ industrial paint, Nut bolt GI Bearing heavy, (branded, as per buyer Nos 1 25 442.00

Four Hundred Forty Two

approval) FRP seat thickness 4-5mm, Swing assembly 6mm chain with all

accessories and fixing before Execution sampe approved by Engineer in charge /Architect.

Rupees One Lakh(s)

Wave Slides – 1Nos. Wave Slide-16*4Ft. L-10ft,Platform 6ft,Structure 60mm,50mm GI Pipe.

Twenty One Thousand

163 1.00 Powder coated. Slide roller LLDPE Plastic 52mm rolls before Execution sampe approved by Nos 1 21 957.50

Nine Hundred Fifty Seven

Engineer in charge /Architect.

And Paise Fifty Only

Seesaws Two Sets – 2 Nos. 1 normal see saw, 1 spring Length – 8-10 ft., Width – 2-3 ft.,

Height – 2-3 ft. All round and rectangular spring legs are GI or CR, ISI make Gauge 14 gauge, Rupees Eighty Two

2 coating are red oxide and final paint of industrial paint, Nut bolt GI, FRP thickness 5-6 mm Thousand Two Hundred

All round and rectangular pipes are GI or CR, ISI make Gauge 14 gauge, 2 coating are red Thirty Four And Paise

oxide and final paint of PU/ Epoxy/ industrial paint, Nut bolt GI Bearing heavy before Twenty Only

Execution sampe approved by Engineer in charge /Architect.

Sitting Type 2: Providing & placing Circular Bench as per ref images or drawing. Material: Rupees Thirty Two

Canadian wood top finish with metal supports Size : 6m perimeter , 450mm height before Thousand Nine Hundred

Execution sampe approved by Engineer in charge /Architect. Forty Four And Paise Fifty

Box cutting the road surface to proper slope and camber for making a base for road work

Rupees One Hundred

including removing the excavated stuff and depositing on the road side slope as directed

166 1308.00 Cmt 114.62 Fourteen And Paise Sixty

Providing and Laying 125mm thick W.B.M., in one layers, using B.T.M.C. metal of size 40mm Rupees One Thousand

to 63mm in layers including 16% stone screening 13.2mm size and 8% stone dust as filler, Two Hundred Sixty One

including spreading, watering and cosolidation by vibratory roller as per MoRTH And Paise Forty Nine

specifications etc. complete as directed by Engineer-in-charge. Only

Construction of un-reinforced, dowel jointed M-250, plain cement concrete pavement over

a prepared sub base with 53 grade cement, coarse and fine aggregate conforming to IS

maximum size of coarse aggregate not exceeding 25 mm, mixed in a b laid with a fixed form

Rupees Five Thousand

spread, compacted and finished admixtures as approved, concrete surface hardner, curing

Three Hundred Twenty

168 312.00 compound, finishing to lines and grades as per drawing Compactionand finishingof cement Cmt 5 326.74

Six And Paise Seventy

concrete road by trimix process providing extra Labour charges for the trimix vacume

dewatering service process on cement concrete road sutface by using vacuumdewatering

pump floater surface vibrator including making groves and rough finish to surface including

leveling etc complete.

Road marking with hot applied thermoplastic paints with reflectorising glass beads on

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge

Rupees Three Hundred

line/cut patta. The white color marking should provide liminance coefficinet on cemend 367.72

169 360.00 Smt Sixty Seven And Paise

road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during

Seventy Two Only

the service life during the day time. The marking should meet the performance criteria for

night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

Driling of bore 215 mm Dia strata ( 0 to 30 metre) Indcluding lowering and fixing of 175 mm Rupees Three Hundred

170 200.00 dia ERW pipes / PVC pipe up to required depth and furthether driling of 165 mm dia bore Meter 330.27 Thirty And Paise Twenty

hole in rocky strata DTH ring indluding fiting etc. complete (As per Zone) Seven Only

Supply of 175mm dia UPVC casing pipe :Cstype: of si marked approved qulity Rupees Nine Hundred

171 100.00 Meter 915.06 Fifteen And Paise Six

Providing standerd lenth ISI mark high density polythenc HDPE pipes suitale for potable

Rupees Fifty Five And

172 100.00 water as per IS speecification 4984/1995 ncluding all charges etc,cmplete 40 mm dia (10 kg Meter 55.55

Paise Fifty Five Only

/ Sqm Cm.PE 80)

Providing Flat PVC cable for submersible pumnp as per detail specification as per GWSSB Rupees One Hundred

173 250.00 R/C Size of 4.00Sq.mm. Meter 124.23 Twenty Four And Paise

Twenty Three Only

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing and fixing M.S.Clamp with 5mm thick M.S.plate bore plug including arrangement Rupees One Thousand

with nuts,bolts and lock nuts etc.complete. Two Hundred Twenty

Seven And Paise Eighty

Providing and constructing and junction chamber of size 0.45x0.45x0.45 mt. including

Rupees Two Thousand

necessary excavating 23 Cum. brickwall, beding CC 1:2:4, top RCC slab, 15mm thick plaster

175 15.00 Each 2 807.80 Eight Hundred Seven And

and connection of rain water pipes as per detail drawings and as directed by engineer – in –

Paise Eighty Only

Providing rain water harvesting filter chamber of 2.10x2.10 Mt size and 1.20 Mt depth

Rupees Fourteen

including necessary excavation 23cm brickwall beding CC 1:2:4 top RCC slab. 15mm thick

Thousand Three Hundred

176 5.00 plaster and filling up to 0.30 mt Kapachi 25 to 40mm size 0.30 mt. Kapachi 10 to 12mm size Each 14 319.78

Nineteen And Paise

and coarse sand 0.60 mt. etc. as directed.

Seventy Eight Only

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length

, in below type of pipe erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting Rupees Four Hundred

177 270.00 base frame covered with textured/metallic/white front plate modules erected on / in wall Pt. 485.81 Eighty Five And Paise

/ ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as Eighty One Only

directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type Rupees Six Hundred

178 45.00 erected on PVC / Metallic/Wooden box, single mounting base frame covered with Pt. 674.68 Seventy Four And Paise

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe Sixty Eight Only

erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

Rupees Five Hundred Ten

179 97.00 PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in Pt. 510.05

And Paise Five Only

wall / ceiling as per pipe erected with following type of accessories. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) Rupees Eight Hundred

180 54.00 earthing wire from mcb d b board. (f) with medium class Rigid PVC pipe and accessories Pt. 871.63 Seventy One And Paise

erected concealed in wall/ceiling complete Cat. III Sixty Three Only

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected

Rupees Two Hundred

on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

181 80.00 Pt. 257.55 Fifty Seven And Paise

metallic/white front plate modules erected on / in wall / ceiling with following type

Fifty Five Only

accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires erected in below type of pipe with 6A Modular type switches and following type of

Rupees Six Hundred

accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered

182 20.00 Pt. 603.98 Three And Paise Ninety

with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete. Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Rupees One Hundred

183 6.00 front plate , modules erected with necessary connections as per site situation directed by Ea. 160.59 Sixty And Paise Fifty Nine

Engineer In charge. (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat. III Only

Providing following type of Modular Type Accessories mounted with PVC /

Rupees One Hundred

metallic/Wooden box, single mounting base frame covered with textured / metallic/white

184 30.00 Ea. 160.59 Sixty And Paise Fifty Nine

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge (4) TV Co-axial Socket outlet . Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Rupees Three Hundred

185 5.00 front plate , modules erected with necessary connections as per site situation directed by Ea. 398.95 Ninety Eight And Paise

Engineer In charge (5) Electronic hum Free steps EME Fan regulator Cat. III Ninety Five Only

Providing following type of Modular Type Accessories mounted with PVC /

Rupees Three Hundred

metallic/Wooden box, single mounting base frame covered with textured / metallic/white

186 5.00 Ea. 329.26 Twenty Nine And Paise

front plate , modules erected with necessary connections as per site situation directed by

Twenty Six Only

Engineer In charge(19) Modular Indicating Call Bell Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

Rupees One Hundred

metallic/Wooden box, single mounting base frame covered with textured / metallic/white

187 5.00 Ea. 149.48 Forty Nine And Paise

front plate , modules erected with necessary connections as per site situation directed by

Forty Eight Only

Engineer In charge(20) Modular Buzzer Cat.III

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Rupees Six Hundred

188 5.00 front plate , modules erected with necessary connections as per site situation directed by Ea 682.76 Eighty Two And Paise

Engineer In charge(23) USB Charger with output of 5 V DC,2.1 A with inbuilt surge Seventy Six Only

protection. Cat-III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed Rupees Twenty Four And

with adhesive solution & Clamps with following dia of pipes, in approved manner as Paise Twenty Four Only

directed (a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed Rupees Thirty Three And

with adhesive solution & Clamps with following dia of pipes, in approved manner as Paise Thirty Three Only

directed(b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed Rupees Fifty Four And

with adhesive solution & Clamps with following dia of pipes, in approved manner as Paise Fifty Four Only

directed(c) 32 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

Rupees Sixty Two And

192 250.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Mtr. 62.62

Paise Sixty Two Only

colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

accessories( a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

Rupees Eighty Two And

193 650.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Mtr. 82.82

Paise Eighty Two Only

colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

Rupees One Hundred

194 250.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Mtr. 102.01

Two And Paise One Only

colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

accessories (d) 3 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 Rupees One Hundred

195 710.00 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Mtr. 112.11 Twelve And Paise Eleven

continuity of following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire Only

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 Rupees One Hundred

196 345.00 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Mtr. 147.46 Forty Seven And Paise

continuity of following size (A) with medium class Rigid PVC pipe and accessories(b) 2 wire 6 Forty Six Only

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising

inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made Rupees Thirty Nine And

of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black Paise Thirty Nine Only

PVC insulation (b) RG-6 .

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC

Rupees Twenty And Paise

198 120.00 or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing Mtr. 20.20

pipe. of following size of conductors & nos.of pairs. With necessary connections. [A]

Conductor Size 0.5 mm (a) Unarmoured (2) Two Pairs

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC Rupees One Hundred

199 50.00 or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing Mtr. 125.24 Twenty Five And Paise

pipe. of following size of conductors & nos.of pairs. With necessary connections. [A] Twenty Four Only

Conductor Size 0.5 mm(b) Armoured [Jelly Filled] (1) Ten Pairs

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC

Rupees Forty Seven And

200 60.00 box erected flushed on wall or concealed in wall with necessary plastering & finishing as Ea. 47.47

Paise Forty Seven Only

directed of following size.(a) 100 mm x 100 mm x 75 mm(d)

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC

Rupees Seventy Six And

201 24.00 box erected flushed on wall or concealed in wall with necessary plastering & finishing as Ea. 76.76

Paise Seventy Six Only

directed of following size(b) 175 mm x 100 mm x 75 mm(d)

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC

Rupees Eighty Eight And

202 10.00 box erected flushed on wall or concealed in wall with necessary plastering & finishing as Ea. 88.88

Paise Eighty Eight Only

directed of following size (c) 200 mm x 250 mm x 75 mm(d)

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC Rupees One Hundred

203 12.00 box erected flushed on wall or concealed in wall with necessary plastering & finishing as Ea. 112.11 Twelve And Paise Eleven

directed of following size (d) 250 mm x 300 mm x 75 mm(d) Only

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open box with Rupees One Thousand

single mounting base frame covered with textured/metallic /white front plate,modules One Hundred Thirty

erected with necessary connections as directed1 no. 6A/16A universal plug-switch Three And Paise Twenty

combined. 3 nos. 6A Switch3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III Two Only

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser,

Rupees One Hundred

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type,

205 19.00 Ea. 188.87 Eighty Eight And Paise

with PC diffuser suitable LAMP holder (iii) 10 to 15 watts Cat-III

Eighty Seven Only

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Rupees Four Hundred

206 324.00 Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & Ea. 427.23 Twenty Seven And Paise

LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED Twenty Three Only

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat-llI

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

Rupees Three Hundred

mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

207 58.00 Ea. 312.09 Twelve And Paise Nine

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.)(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to

Rupees Six Thousand Five

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, 6 566.01

208 12.00 Ea. Hundred Sixty Six And

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79

& LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iv) above 90 to 120 watts Cat-llI

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 Rupees Four Thousand

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Eight Hundred Nineteen

209 40.00 Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 Ea. 4 819.72

And Paise Seventy Two

& LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of Only

LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.)(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (ii)32-40W Cat-llI

Bollards(b) LED Bollard fittings of minimum height 600 mm & dia.100mm having

Rupees Three Thousand

polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished powder

210 30.00 Ea. 3 161.30 One Hundred Sixty One

coated pipe with base plate 160x160mm with erection by M8x75mm fastner with required

And Paise Thirty Only

RCC foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III

Supplying and erecting LED Solar street lights with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink Rupees Thirty Six

extruded aluminium with diffuser and Polycarbonate optics/ lenses with company Thousand One Hundred

mark/name engraved or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge Fifty Four And Paise

controller with 12 hours automatic switch on/off with wind speed resistance 44 m/s as per Ninety Seven Only

(E) 36W,3000 lumens, IP-65, PV Module – 2x100W and 6 mtr poles complete erected

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System

having a Smart Panel comprising of 3 Phase IoT Streetlight Smart 4G Timer with 16x2 LCD to

display RSSI, relay status, RTC time & diagnostics., Controller works on 3-phase & also on

any available 1-Phase., Controller with 8-hour battery backup during external power failure.

External power failure alert immediately to cloud., 110-630 V AC @ 50-60 Hz – 3 phase

operating range., Standby power consumption <3W., Smart 4G Timer with RS232 port for

DLMS Energy meter & RS485/UART/RS232 port for any external device communication.,

Smart 4G Timer must be compatible with any make / brand of DLMS (RS232) Energy Meter.,

DI: 5 Nos. (3 Contactor / Latch detection, 1 for SPD, 1 for Door Sensor.)., DO: 3 Relays for

Independent control each phase (R, Y, B) with 1 extra spare relay., Highly Precise TCXO RTC

with 10-year battery reserve., Automatically syncs with internal, cellular, server & GPS clock;

with logs stored in the CCMS Web Software., Smart 4G Timer with dual SIM functionality for

connectivity backup., 4G M2M SIM 5-Year communication included., Local configuration via

Rupees Two Lakh(s) Fifty

WiFi / BLE for maintenance or during force majeure., GPS chip inbuilt of Smart 4G Timer for

Two Thousand Two

212 1.00 auto location tracking & astronomic schedule location., 50 programmable schedules., Ea. 2 52 230.33

Hundred Thirty And Paise

Astronomic scheduling with monthly offsets., Smart 4G Timer has inbuilt timer stores

Thirty Three Only

schedules locally & also stores schedule execution logs locally, syncs to cloud whenever

connected to cloud., Auto-scheduler overrides manual operations., Monitoring & alerts for

MCB trips & SPD failure., Over/under voltage, current, overload, power factor & short

circuit protections with alerts via Dashboard, App, SMS, WhatsApp & Email., Contactor /

Latch chattering protection & alerts., Smart 4G Timer with neutral failure protection and

alert., During earthing failure to Panel, it must generate alerts on CCMS Dashboard for

safety., Bulit-in Watchdog for anti-jamming., Smart 4G Timer must send Regular "heartbeat"

on software for CCMS status., Accelerometer for tamper & panel movement detection &

alerts., Smart 4G Timer must be tested from an NABL Lab for Surge Test @ 6 KV (IEC 61000-

4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @

150 KHz-30 MHz (CISPR11), Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours

(IS: 9000 (Part 5/Sec.2):1981 latest) with all test passing criteria as “Temporary degradation

or loss of function or performance which is self-recoverable”., FOTA functionality required

Providing Smart 4GApproved

and erecting Timer sends & stores

make online/offline

Four pole moulded casedatacircuit

Rupees Sixteen Thousand

breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable

Two Hundred Twenty

213 1.00 Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Ea. 16221.61

One And Paise Sixty One

connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having

Rupees Twenty Five

breaking capacity ICU of 50 KA and above at 415 V having Normal current rating 400A.

Thousand Two Hundred

214 1.00 with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all Ea. 25228.79

Twenty Eight And Paise

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

Seventy Nine Only

housing. ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on Rupees One Hundred

215 184.00 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. Ea. 112.11 Twelve And Paise Eleven

confirming to IS 8828/1996 with ISI Mark Cat.I Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following Rupees Two Hundred

216 14.00 capacity providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to Ea. 299.97 Ninety Nine And Paise

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing Ninety Seven Only

box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having Rupees Seven Hundred

217 2.00 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Ea. 737.3 Thirty Seven And Paise

(c)63 Amp. Cat.III Thirty Only

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having Rupees Five Hundred

218 14.00 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (a) Ea. 587.82 Eighty Seven And Paise

6 to 32 Amp. Cat.III Eighty Two Only

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having Rupees Seven Hundred

219 2.00 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Ea. 716.09 Sixteen And Paise Nine

(c)63 Amp. Cat.III Only

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket,

Rupees Six Hundred Sixty

220 9.00 company fabricated powder coated sheet steel enclosure erected as directed with Ea. 660.54

And Paise Fifty Four Only

connection. [B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

Rupees One Thousand

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

Four Hundred Ninety

221 14.00 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used Ea. 1492.78

Two And Paise Seventy

of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43) (iv)12

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Rupees Three Thousand

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used Eight Hundred Seventy

of same company of MCB to be used) suitable for(B) three phase incoming and single phase Four And Paise Thirty Six

horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (iv)12 Only

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation

Rupees Three Thousand

223 2.00 on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all Ea. 3040.1

Forty And Paise Ten Only

advance feature & do not incorporate any electronic component for following Max. rating

erected as directed. (iii) 63 Amps. FP Cat. III Page 17 of

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on

residual current device having 10 KA short circuit breaking capacity and 30 mAmp. Rupees One Thousand

Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free Nine Hundred Forty Four

mechanism operating for rated leakage at nominal ten volt, complete erected including all And Paise Twenty Five

materials lugs screws etc. completed. [b] 32A / 40A, 2 pole Single Phase Cat. II Only

Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB / Rupees Two Hundred

225 100.00 Transformer, LT panel board, Motors etc. using copper clamp. Kg. 225.23 Twenty Five And Paise

Twenty Three Only

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised Rupees Three Hundred

226 8.00 iron pipe with coupling and buch buried in specially prepared earth pit complete with Ea. 368.65 Sixty Eight And Paise

necessary 8 SWG earth wire. Sixty Five Only

For using salt and charcoal / coke as required for pipe type earthing. Rupees One Hundred

227 8.00 Ea. 171.7 Seventy One And Paise

providng and erecting Approved make single phase electronic energy meter rating

5A/20A/40A based on ASIC (Application Specific integral circuit) digital technology with Rupees One Thousand

accuracy Class-I, temper proof, free from effect of external magnetic field with phase, earth, Seven Hundred Thirty

reverse and impulse indications, 6 digit electro-mechanical counter suitable to work on 120 Eight And Paise Twenty

V to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as directed with 3 One Only

year replacement guarantee. Cat. III

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated

indoor type cubical panel board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for Rupees Nineteen

measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, Thousand Three Hundred

sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy Eighty Seven And Paise

duty end terminal connection,danger notice board,necessary ventilation,earthing strip Ninety Six Only

complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size.(B) The standard

companies switch gear shall be used and only manufacturers at CPRI approved factory (ii)

with 550 mm. Depth

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium conductor for

Rupees Ninety Two And

230 150.00 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of Mtr. 92.92

Paise Ninety Two Only

cables. (B) 2 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Rupees Three Hundred

231 20.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 321.18 Twenty One And Paise

of following size of cables. (I) 3 core 70 Sq. mm Eighteen Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Rupees One Hundred

232 100.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 183.82 Eighty Three And Paise

of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) Eighty Two Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Rupees Two Hundred

233 150.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 220.18 Twenty And Paise

of following size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) Eighteen Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Rupees Two Hundred

234 150.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 284.82 Eighty Four And Paise

of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Eighty Two Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Rupees Five Hundred

235 100.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 540.35 Forty And Paise Thirty

of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) Five Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Rupees Seven Hundred

236 80.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 731.24 Thirty One And Paise

of following size of cables (G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) Twenty Four Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper Rupees Two Hundred

237 130.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 292.9 Ninety Two And Paise

of following size of cables (C) 2 core 6 Sq. mm Ninety Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper Rupees Six Hundred

238 95.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 676.7 Seventy Six And Paise

at road crossing or floor of following size of cables.(A) 4 core 10 Sq. mm Seventy Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper Rupees Nine Hundred

239 95.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Mtr. 987.78 Eighty Seven And Paise

at road crossing or floor of following size of cables.(B) 4 core 16 Sq. mm Seventy Eight Only

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the

Rupees Fifty Five And

240 10.00 fault all over the run and back filling the same and making the surface as normal ground. Mtr. 55.55

Paise Fifty Five Only

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Rupees Sixty Two And

material at required depth in existing trench for laying of cable. below ground / road Paise Sixty Two Only

surface for enclosing cable (A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of

Rupees Seventy Three

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

242 340.00 Mtr. 73.73 And Paise Seventy Three

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (B)63mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Rupees Ninety Five And

material at required depth in existing trench for laying of cable. below ground / road Paise Ninety Five Only

surface for enclosing cable (C))90 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

Rupees Thirty Three And

244 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following Ea. 33.33

Paise Thirty Three Only

size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

Rupees Thirty Eight And

245 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following Ea. 38.38

Paise Thirty Eight Only

size of cables.C(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

Rupees Thirty Eight And

246 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following Ea. 38.38

Paise Thirty Eight Only

size of cables.(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

Rupees Forty Seven And

247 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following Ea. 47.47

Paise Forty Seven Only

size of cables. (D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland

Rupees Sixty Six And

248 6.00 with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Ea. 66.66

Paise Sixty Six Only

tape etc for following size of cables.(A) 3 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland

Rupees Eighty Nine And

249 6.00 with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Ea. 89.89

Paise Eighty Nine Only

tape etc for following size of cables. (B) 3 core 70 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with Rupees Six And Paise Six

brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with Rupees Thirteen And

brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm Paise Thirteen Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with Rupees Fifteen And Paise

brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Sq.mm. Fifteen Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with Rupees Twenty And Paise

brass/cadmium plated nut bolts in an approved manner. (D) 35/50 Sq.mm. Twenty Only

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling

fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Rupees Two Thousand

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

Eight Hundred Eighty

254 45.00 with remote unit for Speed Control and all remaining accessories including safety pin, nut Ea. 2885.57

Five And Paise Fifty

bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

Supplying & erecting approved make low noise decorative exhaust fan having square frame Rupees One Thousand

ABS body with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II Seven Hundred Three

And Paise Eighty Seven

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 6 mtr. Long duly

Rupees Four Thousand

painted with two coats of aluminium paint complete with metallic base- plate of 300 mm x

256 30.00 Ea. 4440.97 Four Hundred Forty And

300 mm x 4mm thick for using as a compound light pole with approx. weight 47 Kg.

Paise Ninety Seven Only

Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should be as per IS specification. Basic steel

tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and Rupees Eight Thousand

257 12.00 two coat of Aluminium /approved paint to be erected on / in existing Foundation. The Ea. 8463.8 Four Hundred Sixty Three

length of poles are as below. (C) 9.0 mtr. Long Swaged Steel tubular pole (i) Pole as per IS And Paise Eighty Only

code 410-SP-25 with 300 X 300 X 4 mm base plate with necessary G.I. J Bolts (Approximate

weight 78 Kg) For burial erection

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation

for the pole of size 60 x 60 x 150 cm. Deep in below ground level with plinth of 45 cm x 45 Rupees One Thousand Six

258 25.00 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in Ea. 1652.36 Hundred Fifty Two And

approved manner. Paise Thirty Six Only

( for 9 & 10 mtr pole)

Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should be as per IS specification. Basic steel

tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and Rupees Nine Hundred

259 12.00 two coat of Aluminium /approved paint to be erected on / in existing Foundation. The Ea. 982.73 Eighty Two And Paise

length of poles are as below. (C) 9.0 mtr. Long Swaged Steel tubular pole(ii) Add Extra for Seventy Three Only

M.S. Base plate 300 X 300 X 16 mm for pole, mounting on surface of foundation on GI

foundation bolt. with required stiffeners.

Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should be as per IS specification. Basic steel

Rupees Four Hundred

tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and

260 12.00 Ea. 481.77 Eighty One And Paise

two coat of Aluminium /approved paint to be erected on / in existing Foundation. The

Seventy Seven Only

length of poles are as below. (C) 9.0 mtr. Long Swaged Steel tubular pole(iii) Add Extra for

PU base primer and PU Paint on pole.

Providing and erecting C.I./M.S. flange type base plate of 300mm x 300mm x 6mm Rupees Two Hundred

261 12.00 Ea. 240.38 Forty And Paise Thirty

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with Rupees One Hundred

262 12.00 suitable brass studs with nuts, washers and clamps of size 25mm x 3mm suitable for pole Ea. 146.45 Forty Six And Paise Forty

painted with one coat of red lead paint. Five Only

Providing and erecting cable clamp of 25 mm X 3 mm M.S. flat suitable for fixing 2 Rupees One Hundred

263 12.00 Nos.of armoured cable with nuts and bolts. (B) for 140 mm dia. Pole Ea. 112.11 Twelve And Paise Eleven

Supplying and erecting Water tight M.S.Box of size 20 x 15 x 15 cm. to erect suitable kitkat

fuse / MCB to be . erected on polished wooden board inside the box with hinged/sliding Rupees Two Hundred

264 12.00 door with rubber rings and erected on pole with suitable pole clamp, all duly painted with Ea. 234.32 Thirty Four And Paise

one coat of red oxide and two coats of paints. (Cost of Fuse / MCB shall be taken extra) Thirty Two Only

Providing and erecting street light pole bracket comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient

Rupees Six Hundred

fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per

265 20.00 Ea 614.08 Fourteen And Paise Eight

site condition & suitable welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr

Supplying & erecting approved make Digital time switch having lithium cell 6 years

operative and operate battery backup 1 channel day clock with 14 memory programme, Rupees Three Thousand

suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup One Hundred Sixty Eight

time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. And Paise Thirty Seven

Programming switches & housed in fire proof thermoplastic enclosure & transparent cover Only

erected as required with necessary connection erected as directed.

Providing and erecting Inverter based approved make split air-conditioning unit consisting

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately erected evaporating unit and Rupees Forty Seven

blower motor with its accessories by means of extra supplied proper insulated copper Thousand Eight Hundred

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A Seventy Nine And Paise

plug top & Remote Control & MS Stand) with necessary core cutting. (2)For ISEER Range Five Only

(KWH/KWH)(4.0 to 4.49) (B) for 1.5 ton capacity

Supplying and erecting horizontal / vertical mounting type storage water heater with copper

container housed in M.S./S.S./ABS body insulated with glass wool/puff complete with Rupees Nine Thousand

268 9.00 heating elements,adjustable thermostats 300C to 850C, indicating lamp, safety valve, Ea. 9564.7 Five Hundred Sixty Four

fusible plug, etc.complete erected with coach bolts, nuts. washers & cementation (C)25 And Paise Seventy Only

Ltr. with 2 KW. heating element Cat.III

Supplying and erecting push button operated fully automatic Star-Delta starter with 3 Nos.

Rupees Nine Thousand

of 15A.rating contactors and directly operated thermal overload relay having 10-21A

Seven Hundred Fifty

269 1.00 range and erected in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. motors from 7.5 Ea. 9758.62

Eight And Paise Sixty Two

to 15H.P. complete erected on (A) P.W. Block with necessary connection. Cat.III

Providing & erecting open well horizontal mono block pump set with cast iron body, Rupees Twenty Eight

complete for three phase submersible motor having[F] For 10 HP 3 phase open well Thousand Four Hundred

horizontal mono block pump set suitable for 1725 LPM to 940 LPM @ 15 to 36 MTR head Sixty Four And Paise

suitable for 65/80 mm dia delivery pipe Cat.II Eighty Three Only

Providing and fixing printed instruction chart both in English and Gujarati and duly framed Rupees One Hundred

271 4.00 with front glasses, for treatment of person suffering from Electric shock with minimum 50" Ea 130.29 Thirty And Paise Twenty

diagonally size. Nine Only

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. Rupees Two Hundred

272 2.00 Ea 214.12 Fourteen And Paise

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm Rupees One Thousand

273 10.00 Sq.Mtr 1027.17 Twenty Seven And Paise

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn,

Rupees Two Hundred

crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape

274 2.00 Ea 299.97 Ninety Nine And Paise

for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents

Ninety Seven Only

shall be of standard makes)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet

Rupees Two Hundred

with extra handle at bottom duly painted white inside and Red out side with FIRE mark,

275 6.00 Ea. 214.12 Fourteen And Paise

filled with dry-sand and kept on existing stand provided or hung on wall hook.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets

Rupees Nine Hundred

comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm

276 2.00 Ea. 942.33 Forty Two And Paise

angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat

Thirty Three Only

of red lead and two coats of approved enamelled silver paint.

Filtration of transformer oil as per I.S. for removal of moisture, carbon. slurry etc.by means

of circulating oil through vacuum pump from heating elements and filters to with stand the Rupees Eight And Paise

breaking strength of the oil above 40KV beyond one minute tested in oil testing Kit. (A) on Eight Only

Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6" x 3" ‘I’-Section Girder,

4" x 2"channels, clamps, nuts, bolts etc. Suitable for erection of the followings duly

connected with necessary ACSR conductors. as per drawing approved by the Engineer- in

charge complete with following. Height as per IS 7 Mtr above ground ) (A) 11 KV 200 Amps Rupees Ninety Eight

Dr op out fuses with S.R.B.P. tubes carries.-Three nos (B) 11 KV G.O.D. switch complete Thousand Four Hundred

with insulators, operating handle with galvanised pipe, Sq.bar etc. 400 Amp.- One Set (C) Thirty Three And Paise

11 KV lightening arrestor with clamp- Three Nos. (D) 11 KV shackle insulators- Six Nos. Fifty Nine Only

(E) The above D.P. structure should be earthed with 25 mm.X 3 mm thick double copper

earth strips run separately and connected with separate copper plate earth electrode.

Providing and erecting ISI Marked 3core 70 Sq.mm XLPE insulated 11 KV armoured cable Rupees One Thousand

Aluminium conductor IS-7098 to be laid on wall with clamps or in provided cable trench / Three Hundred Thirty Six

pipe approved manner as directed. And Paise Twenty Three

Providing and erecting cable end termination kit, heat shrinkable Push on type Densons’/

Rupees Twelve Thousand

‘Raychem’/ Elastimold make suitable for 11 KV XLPE cable 3 core 50 & 70 Sq.mm (A)

280 1.00 Ea. 12840.13 Eight Hundred Forty And

Paise Thirteen Only

Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with

Rupees One Thousand

gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171

281 2.00 Ea. 1712.96 Seven Hundred Twelve

and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts and

And Paise Ninety Six Only

bolts grouted in wall complete. [A] For 5 Kg Capacity

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with

Rupees Six Thousand Five

necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall

282 2.00 Ea. 6591.26 Hundred Ninety One And

complete.[A] For 4.5 Kg Capacity

Paise Twenty Six Only

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with

Rupees Eight Thousand

necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall

283 2.00 Ea. 8671.86 Six Hundred Seventy One

complete.[B] For 5.5 / 6.5 KG Capacity

And Paise Eighty Six Only

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 &

BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity at

1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil

cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure

gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover,

joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete with

standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy

duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both logged with asbestos rope,

save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping

and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of Rupees Nineteen Lakh(s)

delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to Sixty Nine Thousand

284 1.00 IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and Ea. 1969798.96 Seven Hundred Ninety

alternator fitted on a common fabricated steel base plate with antivibration mounting engine and alternator

Eight And Paise Ninety

both connected to each other by flexible flange coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator lamps Six Only

duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity

armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing

material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm.

The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level

not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity of

minimum 8 hrs of continous running capacity on full load . Erection, commissioning and satisfactory testing as per

requirement with first filling of fuel (minimum up to the 80% of fuel tank capacity), oil, etc. with guarantee /

Warrantee of complete system for Two years. & with obtaining all necessary certificate from Electrical Inspector.

The Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo

Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Providing & erecting approved make AMF control panel suitable for following size of

phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1)

Power module: A pair of electromechanically interlocked contactors (for mains &

generator) Overload relay for generator contactor Neutral contactor for mains and

generator Power socket for connections. 2) Control and metering module: Line voltage Rupees Two Lakh(s)

monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit Twenty Two Thousand

285 1.00 breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Ea. 222714.09

Seven Hundred Fourteen

Emergency stop push buttons. Manual start push button. frequency meter. Engine hour And Paise Nine Only

meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely

event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators

with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency

stop battery charger. The AMF Panel of following capacity(D) AMF Control Panel for200

KVA/250 KVA3 phase DG Set

Providing & erecting approved make ATS panel suitable for following size of 3 phase,

V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: Rupees Ninety One

1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor Thousand Five Hundred

with NO & NC contacts with Automatic Battery Charger, indicating lamps for Generator ON, Eighty Five And Paise

Mains ON, Load and suitable control terminals and power terminals with neutral earthing Seventy Nine Only

studs.(G) ATS Panel for 180 / 250 KVA 3 phase DG Set

Supplying and erecting Acoustic enclosure (canopy) made out of 18 SWG, CRCA Sheet,

sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 Rupees Two Lakh(s) Sixty

The resin bonded Rockwool / PU FOAM covered from inside level not more than 75 dB at a Four Thousand Eight

distance of 1 mtr, as PVCT norms , on provided foundation suitable for following size of DG Hundred Twenty Seven

Set. The enclosures for following capacity of DG sets.(E) For for 160/180/200/250 KVA And Paise Five Only

Supply of 250 KVA Outdoor type Compact Substation consisting of Transformer,HT switchgear and LT Switchgear

and confirming to IEC-62227. a) Transformer: 250 KVA Copper wound 11KV /433 V DYn11, Dry Cast resin type

Transformer with tapping range +10 to -10% @ 2.5% ( with tolerance), class F , with surge restorers, Digital WTI,

IS1171 as per b) HT Compartment: 11KV, 21kA for 3 Sec . 630 A 50 Hz, gas insulated VCB in SS tank in sheet

enclosure having provision for one no. direct connection of Incoming supply cable upto 300sq mm and one no.

VCB( Manually charging & closing) in series with LBS between VCB and Transformer, Self Powered Relay 3 O/C +1

E/F Relay type CSPR-V5, mechanical ON/OFF indicator, trip coil , Manual Close & Trip PB, live cable indicator,

mechanical interlocks, pad locking facility, SF6 gas manometer, cable boots, 3 nos. CTs with Ratio -/1A, Cl: 5P10,

Rupees Two Lakh(s)

2.5 VA for protection c) LV side compartment : one no. MCCB of 400A, 36kA, 4Pole, Microprocessor based release

with arrangement for bottom cable termination ( 100% for phase & 50% for N, Current density - 1A/ sq mm) Ninety Nine Thousand

The enclosure should be of IK10 type.The Enclosure shall construction shall be GI of thickness at least Five Hundred Eighty Two

1.6/2mm.The enclosure shall be Powder Coated. Each compartment will be provided with the door and pad And Paise Sixteen Only

locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for each

compartment. The Transformer compartment will have IP-34 ingress protection, whereas the HT/LT compartment

will have IP-54 protection.The connection between HT and Transformer shall be by 3 runs of single core 95 sq mm

XLPE aluminium cable and between Transformer to LT switchgear shall be by appropriate Aluminium PVC sleeved

Busbar Add extra Rs 9000/- for integrated steel cubical panel IP 54 to house upto 03 Nos additional outgoing

switchgears with proper rating busbar drop,supports etc with arrangment for cable termination etc.( Switchgears is

not included in this) Add extra Rs 16000/- for integrated steel cubical panel IP 54 to house upto 06 Nos additional

outgoing switchgears with proper rating busbar drop,supports etc with arrangment for cable termination etc.(

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical

Panel fabrication should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for

switching as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with

OC, SC, internal earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, Rupees Two Lakh(s)

with OC, SC, internal earth fault protection,Copper tinned insulated Busbar,Cubical panel should be Eighty Eight Thousand

289 1.00 indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De Each 288878.18 Eight Hundred Seventy

tuning Reactor for each capacitor,Panel having Short Circuit and Overload protection,Each step Eight And Paise Eighteen

Capacitor having suitable MCB with Sc, OL, internal earth fault relay,Each stage having Stage Contactor

(Capacitor load rating),PF regulator master controller having suitable steps with LCD display, Rs

Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS

Chanel for Floor mounting, Cable entry as per site situation,Cooling fans for panel(C)100KVAR

Providing Batteries With Standard . IEC61056-3 OR JIS C 8702, Battery type - Maintenance

Free Or Minimum Maintenance Lead Acid , Battery @ C20 Rating -12V, Cut Off Voltage( at Rupees Three Thousand

25 deg C- 10.2V, Float Charging Voltage-13.5 volts per module @ 27 deg C, Voltage ripple Four Hundred Twelve

290 8.00 allowable - <2% of the RMS value, AH Efficiency- Above 95%, Operating Temperature range Each 3412.79

And Paise Seventy Nine

of Battery- -20 deg C to + 60 deg C, Date of manufacturing - The date of Manufacturing shall Only

not be more than 6 Months older than the date of supply.28Ah

SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long.

Rupees Nine Thousand

Air Termination Base tested for conditioning, Ageing Test & Lightning impulse current

Four Hundred Sixteen

291 1.00 withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per Each 9416.23

And Paise Twenty Three

6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use

exclusively for lightning protection (Vertical Riser/Down Conductor which shall be

concealed in Column OR Flushed on) to meet the requirement of IS IEC 62305 With

Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia tail connector

used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For

Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector

to connect Earth fixing point to vertical raiser/Down conductor, SS Straight Splicer at every 4 Rupees Seven Hundred

292 50.00 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every 3 mtr suitable for Mtr 728.21 Twenty Eight And Paise

interconnecting round conductor with reinforcement inside the concrete for structural Twenty One Only

earthing system, SS connector -To connect external conductor 8- 10 mm with earth fixing

point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning &

Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs

waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt.

accredited Third party laboratory to meet the requirements of IS/IEC

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with

micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as Rupees Five Thousand

per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided Nine Hundred Ninety

clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber Two And Paise Thirty

with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). Three Only

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by Rupees Fifty Five

15˚C within a hour, The water cooler should be comprising of hermetically sealed Thousand Eight Hundred

compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, Ninety Three And Paise

thermostats, relay etc.complete with necessary inlet & outlet connection. The body of Forty Only

water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S.

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon Rupees Twenty Nine

filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon Thousand One Hundred

filter auto low & high pressure switches with following size of storage tank & LPH capacity & Eighty Seven And Paise

erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump Ninety Nine Only

Supply of 60W LED Decorative Post Top type luminaire with System efficacy of 120 lm/W (7800

lumens), suitable for external poles of dia. 65mm to 75mm. Luminaire shall be

made up of pure polyster power coatedAluminum Extrusion/die cast housing duly Powder coated with

gray pure polyester powder. Post top should have decorative dual triangle

top with more elegant look. All external hardwaremust be of SS304 grade. LM 80-08 compliant LEDs of

EMC/ceramic package from reputed makes such as Nichia/Cree/ Bridgelux/

Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for

Photo-biological safety and certificate for the same from manufacturer shall

be provided. Luminaire shall be with IP66 and IK10 protection. The LED shall be compliant with LM80- Rupees Twenty Eight

08 standard with L70 life of 50000 Hrs tested at maximum current

Thousand Six Hundred

296 55.00 (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used Nos 28699.15

Ninety Nine And Paise

should be with CCT of 4000 K, CRI of Minimum 80 and SDCM <5. LEDs must be

driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 Fifteen Only

micron to be used for LED mounting.LED Driver shall be silicone potted,

Integrated type, Isolated, Constant Current with range 140-290V AC. Driver Efficiency > 85% & 5 KV

internal surge protection, Power factor greater than 0.95 and total harmonic

distortion (THD) of less than 10% should be integral to the luminaire. Manufacturer shall have inhouse

lab approved by NABL or ministry of science of govt of India. LM79 and

LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS

16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 should be there.

Supply of LED based bollard of squared cross section (83 X 83mm), housing made up of extruded

aluminium,sturdy and embossed brand name/logo name of manufacturer and

optics made of milky white PC diffuser with pattern. The fixture should have a minimum system

efficacy of 55lumen/Watt and a minimum system lumen output of 850 lumens

and minimum system wattage of 15Watts.The fixture shall have a CRI of minimum 80. The fixture shall

be designed for a system life of 50,000 hours @70% lumen maintenance.

Ingress Protection of IP65 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of Rupees Seven Thousand

297 30.00 IK10, CCT: 4000/5700K. The fixture driver should have an operating voltage Nos 7585.1 Five Hundred Eighty Five

range of 140-280 V, surge protection of >=3KV, external surge protection 10KV, PF >0.95, THD<10% & And Paise Ten Only

Driver efficacy >80% @full load and rated voltage. Ambient temp range:

0deg to 45deg C. The Drivers should be a potted driver not a printed circuit board without casing,

mounted inside the luminaire. The fixture should comply with the parameters

as per IS10322. Manufacturer shall have inhouse lab approved by NABL . LM 79 and LM80 reports

need to be submitted from a NABL/UL accredited lab to verify above

parameters. Height: 800mm & Weight including all accessories should not be more than 2.2Kg.

Approved Make: Wipro LB35-J2

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

Supply of LED based Spike light, housing made up of pressure die cast aluminum Alloy with effective

thermal management,sturdiness and embossed brand name/logo name of

manufacturer and optics made of surface mount reflector with toughened. The fixture should have a

minimum system efficacy of 80lumen/Watt and a minimum system lumen

output of 640 lumens and maximum system wattage of 8 Watts.The fixture shall have a CRI of

minimum 80 and beam angle: 50-55deg. The fixture shall be designed for a system

life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP67 (lamp and gear Rupees Four Thousand

Compartment) and Mechanical Impact Resistance Rating of IK >=07, CCT: 2700K. The Six Hundred Thirty Two

fixture driver should have an operating voltage range of 100-270 V, surge protection of >=3KV, PF And Paise Eighty Seven

>0.9, THD<10% & Driver efficacy >80% @full load and rated voltage. Ambient Only

temp range: 0deg to 45deg C. The Drivers should be a potted driver not a printed circuit board without

casing, mounted inside the luminaire. The fixture should comply with the

parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL . LM 79 and LM80

reports need to be submitted from a NABL/UL accredited lab to verify

above parameters. Dimension: Ø115 X 158 X 93mm & Weight including all accessories should not be

more than 1.5Kg.

LED LF05 Post Top type luminaire with System efficacy of 100 lm/W. Luminaire

shall be made up of extruded Aluminium housing with PC Diffuser (Tubular Milky white LED light

column). All external hardware must be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic

package from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be

provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and

certificate for the same from manufacturer shall be provided. Luminaire shall be with IP65 and IK08

protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at

maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing).

The LEDs used should be with CCT of 4000/5700 K, CRI of Minimum 80 and SDCM <5. LEDs must be Rupees Twenty Six

driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of

Thousand Seven Hundred

299 20.00 micron to be used for LED mounting. It should have IP 65 potted driver and accessories pre-wired up Nos 26779.14

Seventy Nine And Paise

to terminal block., Integrated type, Isolated, Constant Current with range 140-270V AC. Driver

Efficiency > 85% & 4 KV internal surge protection, 10KV External surge Protection, Power factor Fourteen Only

greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the

luminaire. LED driver should have CISPR 15 / EN 55015 compliance to limit for radio disturbance

characteristics. Manufacturer shall have inhouse lab approved by NABL or ministry of science of

govt of India. LM79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify

above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS

16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 should be there. Length: 3000mm (40W).

Dia: Ø100mm Approved Make: Wipro LB34

Tender Value In Words

Rupees Eight Crore Thirteen Lakh Seventy Four Paise Fifty Eight Only

I/We am/are willing to carry out the work at…% above/below percent (Should be written in figures and words) of the estmated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct…........% below Add…........% above

Item Description of Item Unit Rate in

Quantity Rate in Words Total Amount

Quantity Rate in Words Total Amount

No. Figure (Rs.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C,Date:11/05/2017 as

stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender

Dy. Executive Engineer Executive Engineer

Gujarat Pavitra Yatradham Vikas Board Gujarat Pavitra Yatradham Vikas Board

Gandhinagar Gandhinagar