Providing And Fixing Of Open Gym Equipments.

Providing And Installation Of Rower • DIMENSIONS: - 1200mm (Length) x 1000mm (Width) x 920mm. (Height) • SAFE AREA: - 1.5 Mtr x1.5 Mtr. • Rower Equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The Main frame is of 80NB “C” class G.I. Pipe welded with M.S. round plate of 250mm X 10mm. • The handle frame 25NB is made from “C” class G.I. pipe. •The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” Class Welded with M.S. round plate of Ø250 mm &10mmthick. Main pipe supported with 25mm X 25mmM.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • To join the movement frame to main frame connecting links made up from 32 NB G.I. “C” class pipe. • The seat fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mm X 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Pins used of Diameter 17mm are made up from SAE 8620 bright material. • The bearings used are of “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). • High tensile steel with galvanized nuts and bolts are used for assembly. • The P.U. bushes (Stopper) used to avoid the collision. • The circlips used for assembly is of A 16 • The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness

SINGLE SEATED PULLAR- *DIMESIONS: - 1900mm (Length) x 740mm (Width) x 1920mm (Height). *SAFE AERA: - 1.2Mtr x 3Mtr. *Seated puller equipment made up of “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. *The center pipe is of 100NB made from “C” Class G.I. pipe. *Bottom support is of M.s. round plate of 0250mm & 10mm thickness is welded. *All linkages are made up of 25NB “C” Class G.I. pipe. *The handle frame is of 32NB “C” Class G.I. pipe. *The seat frame is of 32NB “C” class G.I. pipe. *To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. *The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “C” class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. *Foundation cover Closing Cap is made from FRP Material. *The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and form radius of 20 mm with no sharp edges. *Closing Caps are made up of high quality Fiber reinforced Plastic material. *Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. *The bearings used are of “6205zz” and “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). *High tensile steel with galvanized nuts & bolts are used for assembly. *The cerclips used of assembly are of A16. *The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Providing & installation of Parallel Bar • DIMENSIONS:-1870 mm (Length) x 530 mm (Width) x 2000 mm. (Height). • SAFEAREA: - 5.0 Mtr x 2.5Mtr. • Parallel Bar equipment made from “C” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The main frame made from 50 NB “C” Class G.I. pipe. • The handle frame is of 32NB made from “C” Class G.I. pipe. • The foundation used for fixing is25mmx25mmx3mmthickness L Angle. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The powder coating done with Polyester powders from Ackzonoble or Berger P aints with 60 to70 micron thickness.

Providing & fixing of Cycle as per specifications as under Area - 1.8 x 0.8 mtr. Safe Area – 2.8 x 1.8 mtr. Height – 1.10 mtr. Providing & fixing of Cycle having its required Area ( 6’0” x 2’6” ) and height of 3’6” Feet. The wheel of cycle should be made by 2” x 2” square pipe with wheel support of 2 nos. half round plate of thickness . The Handle & Centre support should be made by 1’6” x 1’6” Square pipe & handle should be made by 25mm ‘ B’ class pipe for balancing the cycle . The seating arrangement should be supported by 5mm thick plate & the FRP seat of size (13” x 13”) to seat properly on the cycle. The mechanism of the paddle consist of 2 nos. 6305 heavy duty bearing of reputed make with shaft, solid bar & bush for smooth operation of the cycle.

Providing and fixing of Cycle • DIMENSIONS:-1570mm (Length) x 570mm (Width) x 900mm. (Height). • SAFE AREA:-2.5Mtrx1.5Mtr. • Cycle equipment made from “C” class G.I. Pipe of different NB. (NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters). • The main frame of 50 NB made from “C” Class G.I. pipes. • M.S. round plate of Ø 300mm & 10mm thickness used to form a paddle assembly. • The handle frame is of 25 NB made from “C” Class G.I. pipe. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • For foundation 32NB “C” class G.I. pipe used. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mm are made up from SAE 8620 bright material. • Pins used of Diameter 13mm are made up from EN8 material with CRCA pipe 20mm X 20mm of thickness 3.00mm for paddle assembly. • The bearings used are 6001zz &6205zz permanent lubricated sealed bearing of reputed brand (SKF/FAG). • High tensile steel with galvanized nuts and bolts are used for assembly. • The circlip used for assembly are of A24 type. • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Providing & Fixing Of Seating & Standing Twister • DIMENSIONS:-1700mm (Length) x 540mm (Width) x 1250mm. (Height). • SAFE AREA:-3 Mtr x 1Mtr. • Seating & Standing Twister equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The Center Pipe is of 100mm NB made from “C” Class G.I. Round Pipe. • The M.S. round plate of Ø 250mm & 10mm thickness is welded at bottom. • Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB and 25 NB made from “C” class G.I. pipe. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from “C” class G.I. pipe of 25mm NB. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class, Welded with M.S. round plate of Ø 250 mm &10 mm thick. Main pipe supported with 25 mm X 25 mm M.S. angles of 3 mm thickness and 20 mm x 40mm CRCA square pipes of 3mm thickness. • The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The Pins used are made up of Ø35mm SAE 8620 bright material. • The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder of Berger Paint with 60 to70micron thickness.

Providing and fixing of Air Walker:- • DIMENSIONS:-1060mm (Length) x 810mm (Width) x 1600mm. (Height). • SAFE AREA: - 2.0 Meter x1.8 Meter • Air Walker Equipment made from “C” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in Millimeters. • The main frame pipe is of 80mm NB made from “C” Class G.I. Material which is bent at the radius of 250mm. • The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be easily disassembled from main frame. • The bottom support of M.S. round plate of dia 250mm&10mmthick. • The leg movement frame is of 32NB made from “C” Class G.I. pipe. This link is supported with MS flat of size 60X8 mm. • The handle frame is of25NB made from “C” Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class welded with M.S. round plate of Ø250mm&10mmthick. Main pipe supported with25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes. • Foundation cover Closing Cap is made from FRP Material with 0.7 mm thickness. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mmaremadeupfrom SAE 8620 bright material. A24 circlips are used for assembly. The bearings used are“6205zz permanent lubricated sealed bearing of reputed brand (SKF/FAG). • High tensile steel galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with60to70 micron thickness. • The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. • To build structure bushes are used which are made from M.S. seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. • Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust

Providing And Installation of AERO RIDER / HORSE WALKER • DIMENSIONS:-1180mm (Length) x 400mm (Width) x 1400mm. (Height). • SAFE AREA:-2.2Mtr x1.4Mtr. • Horse rider equipment made from “C” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame of 100NB made from “C” Class G.I. pipes welded with M.S. round plate of Ø250 mm &10mmthick • Seat provided are made up of MS deep draw quantity of 2mm thickness with no joint with Uniform outer edge radius 20mm. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm&10mmthick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The leg movement frame is of 32NB made from “B” G.I. pipe. • The handle frame is of 32 NB made from “B” Class G.I. pipe. • The foot rests are made from 25 NB “B” class G.I. pipe. • Pinsused of Diameter 17 mm are made up from SAE 8620 bright material. • The bearings used are “6203zz”permanent lubricated sealed bearing of reputed brand (SKF/FAG). • High tensile steel with galvanized nuts & bolts are used for assembly. • The circlips used for assembly are of A24mm. • The powder coating done with Pure Polyester powders of Ackzonoble or Berger with60 to70micron thickness

SINGLE CHEST PRESS - *DIMENSIONS:- 9000mm (Length) x 710mm (Width) x 2200mm.(Height). *SAFE AREA: - 2.0Mtr x 1.7Mtr. *Chest press equipment made up of “C” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *Make of G.I. Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. *The center pipe is of 100NB made up of “C” Class G.I. pipe. *The bottom welded with support of M.S. round plate of 0250mm & 10mm thickness. *The connecting pipes are made up from 25NB “C” Class G.I. pipe. *The handle frame is made up from 32NB “C” Class G.I. pipe. *To build structure bushes are used which are made from M.S. seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. *The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” Class Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. *Foundation cover Closing Cap is made from FRP Material with 0.7mm thickness. *The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mm X 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. *Closing Caps are made up of high quality Fiber reinforced Plastic material. *Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. *The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). *High tensile steel with galvanized nuts & bolts are used for assembly. *The cerclips used for locking is made up of A24 mm & A16mm. *The powder coating done with Pure Polyester powder from Ackzonoble or Berger Paints with 60 to 70 micron thickness.