Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.7 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹39.6 L+₹70,677.10 (1.82%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹41.7 L+₹2.8 L (7.26%)Rejected-Finance 40 608A PULLOMPARAMBLI HOUSE MANDAKKARA ROAD KOCHI 682 018 | KOCHI | ERNAKULAM | KERALA | 682018 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹45.6 L+₹6.7 L (17.3%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹47.4 L+₹8.6 L (22.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2023_MES_614074_1
8262_GE_NW
Open Tender
Civil Works
Item Rate
240 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹96,000
Yes
22 Jan 2024
17 Aug 2023
13 Sept 2023
17 Aug 2023
11 Sept 2023
30 Aug 2023
17 Aug 2023 - 4 Sept 2023
Amount
S&F MS plates as in base plate , cleats Fe- 410 W (Gde-E-250) quality 'A' plain 5 mm thick cut to required size and welded to GI pipe etc complete all as specified and directed.
S&F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10 cm but n exc 15 cm and dia of neck 11 to 15 mm complete all as specified and directed.
M&L PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in coping to pole and mass concrete complete all as specified and directed.
S&F steel work in tubular truss, purlins, vertical posts etc including special shaped washer etc complete using ERW or induction butt welded tubes using pipe medium grade conforming to IS-1161-1979 grade St.-240 including tarring the ends of posts embedded in concrete complete all as specified and directed.
M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.
M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
M&L for preparation of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces as in backing coat complete all as specified and directed.
M&L for Glazed ceramic tiles 350x250x7mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.
M&L for precast cement concrete solid block masonry 1:3:6, type C1 using 20 mm graded stone aggregate exc 10 cm in width and setting in cement mortar 1:6 in foundation, load bearing wall and wall complete all as specified and directed.
M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
Mel for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & Smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be paid separately.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for preparation of surfaces and applying two coats of oil emulsion distemper over and incl a coat of primer and 1.5 mm thick wall care putty to newly plastered surface complete all as specified and directed.
M&L for preparation new plastered External surfaces and applying two coats of weather proof antifungal paint ( Asian Ultima Protek or equivalent) t over a coat of suitable primer complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.
M&L for cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in coping incl provn of formwork etc complete all as specified and directed
M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr and every corner and filled with bituminous filler complete all as specified and as directed.
M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified
S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete all as specified and directed.
M&L for preparation of new surfaces of steel surface of any descriptions not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/blankets, any thickness including cover fillets.
S&F Aluminium snap grid false ceiling on frame work of aluminium angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm with hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia, 40 mm long with and including provn of 4mm thick Non asbestos fibre cement building boards fixed to aluminium frame work with screws including preparation of new ceiling surfaces and applying one coat of white washing to new ceiling surfaces including preparation of surfaces etc complete all as specified as per manufacturer's instructions and all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube all as per specification and drawing shown in SSR complete all as specified and directed.
S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, S&F in frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm long mild steel butt hinges medium weight complete all as specified and directed.
S&F aluminium anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.
S&F aluminium bow handle "D" type anodized 150mm long complete all as specified and directed.
S&F Aluminium powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification complete all as specified and directed.:- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design
Dismantling wall/floor tiling/ terrazzo tile/ mosaic tiles/ pack tiles incl. cement mortar bedding and removing rubbish off the premises complete all as specified and directed.
M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 10mm thick screed bed in CM (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L for Glazed ceramic coloured joint free tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
S&F PVC flushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.
S&F vitreous China WHB white with flat back of size 550x400mm with bracket including waste coupling and PVC waste pipe complete all as specified and directed.
S&F vitreous China wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.
S&F CP towel Rail 600mm long "D" type complete all as specified and directed.
S&F vitreous China soap dish fixed to wall with screw complete all as specified and directed.
S&F and fix 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
Cutting openings, through brick walls (in cement mortar) for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m ® complete all as specified and directed.
Excavation in trenches n.exc 1.5m and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil all as specified and as directed.
Removing excavated soil to a distance n.exc.250m but n.exc 500m and depositing where directed by Engr-in -charge.
Returning filling in soft/loose soil including spreading levelling watering and wall ramming in layers n/exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.
M&L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) challah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 incl formwork complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, RETAINING WALLS hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed
S&F mild steel TMT bar 8 to 10mm dia cut to length ben to shape required etc as in stirrup complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed.
S&F PVC (SWR) bend with access door any radius 110mm bore complete all as specified and directed.
S&F PVC (SWR) bend with access door any radius 75mm bore complete all as specified and directed.
S&F PVC (SWR) floor trap 75/110mm bore plain with grating including jointing with solvent cement complete all as specified and directed.
S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore complete all as specified and directed.
M&L for home pipe septic tank 25 users capacity incl AC vent pipe, earth work excavation in soft/loose soil, erecting Hume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete and provide new connections to the new septic tank complete all as specified and directed.
M&L for Cement concrete in surface channels and drains in pack 1:2:4 complete all as specified and directed.
M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 ( 40mm graded aggregate) complete all as specified and directed.
Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated materials to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for RCC 1:1.5 :3, type B1 (20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns and RCC lintels and band, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for RCC 1:1.5 :3, type B1 (20mm graded stone aggregate) as in column, pillars and piers and strut complete all as specified and directed.
M&L for Reinforced cement concrete 1:2:4 Type B1 (20mm graded stone aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, etc slab and in shelves and the like complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams sides and soffits of foundation and plinth beams, and similar work , vertical or batter, rough finished surface of concrete complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs and similar works for rough finished surface of concrete complete as specified.
M&L for formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for formwork to sides of column, posts, pillars etc circular in shape, rough finished surface of concrete complete all as specified and directed.
M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
M&L PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass complete all as specified and directed.
S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspender including provn of 4mm thick E-board decorative type in false ceiling including fixing arrangement from any type of steel truss complete all as specified and directed.
M&L for Vitreous China Half stall type urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panelling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvent cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and directed..
S&F Coloured Glazed ceramic tiles 450 x 350 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm screeding in Cement mortar 1:3 complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed
S&F Plastic water closet seat for single piece closet, white, closed pattern with flat bottom and cover size 360 x 640x 685mm , and mild steel chromium plated or aluminised hinging device complete all as specified and directed. Make : Jaguar- catalogue No. SLS-WHT-6851S110P or equivalent from list of manufacturers.
S&F in repair, vitreous China wash basin, white, oval type size 550 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, with anchor bolts 2 Nos cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
M&L for preparation of newly plastered wall surface and applying two coats of Oil emulsion distemper over and incl a coat of 1 mm layer wall care putty and a coat of primer complete all as specified and directed.
M&L for Newly plastered surfaces of external wall with applying thin layer of wall care putty to get smooth surface and applying two coats of apex /weather coat paints over a coats of damp shield complete all as specified and directed.
S&F, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and directed.
S&F 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
S&F tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.
S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.
S&F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified and directed.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters(two/three track), sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.
S&F 4 mm thick figured glass, pin head type in square or rectangle not exc 0.50 sqm in each pane complete all as specified and directed.
S&F in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.
M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent
M&L Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling and ramming as specified complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.
M&L for PCC type B-0, 1:2:4 (12.5 mm graded aggregate) as in mass concrete / kerb around the Machine pressed precast concrete paver block or chamfered on edges complete all as specified and directed.
M&L for point wiring with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames/ covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed for One light point controlled by one switch
All as per item No. 99 above but for one 5 pin 5 Amps socket point controlled by one switch on independent board .
All as per item No. 99 above but for one 5 pin 5 Amps socket point controlled by one switch on same board .
All as per item No. 99 above but for one fan / ceiling fan point controlled by one switch on independent board .
All as per item No.99 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board.
S&F modular switch 1 way 6 Amps,1 module complete all as specified and directed.
S&F Modular socket 6 Amps and 2/3 pin 2 module. Complete all as specified and directed.
S&F switch 15 A One way SP modular type complete all as specified and directed.
S&F Modular socket 6 A/16 A - 2/3 pin 2 module complete all as specified and directed.
S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type single pole one way 15 Amps complete all as specified and directed by Engr-in-Charge.
S&F Socket 5 and 5 amp flush type complete all as specified and directed by Engr-in-Charge.
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed by Engr-in-Charge.
S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F SPN sheet metal enclosure for DB 4 ways double door with 200A rated bus bar complete all as specified and directed.
S&F MCB 'B' Curve 6 to 32 Amp SPN ,240 Volts Make L&T Cat Part No. BB20400B complete all as specified and directed.
S&F MCB 'B' Curve SP 6 to 32 Amp, 240 Volts, Make L&T Cat Part No. BB10060B to BB10320B complete all as specified and directed.
S&F MCB SPN 40 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
S&F MCB SP 32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
S&F LED Tube light fitting 20 Watts DAWN PLUS, smart Extruded Aluminium LED Batten (4 ft) with higher efficiency, Microwave sensor to save more energy reduces the light by 70% during non-occupancy complete all as specified & directed. Make:- Cat Part No. BCLAB 20W LED PS of Bajaj or equivalent model of manufacturers mentioned in list of manufacturers
S&F LED Mirror light fitting 10 watt with connected accessories complete all as specified & directed. Make:- Philips Cat Part No. BN 021 LED10S 6500 PSU GR S1 or equivalent model of manufacturers mentioned in list of manufacturers
S&F in repair recessed mounted 2 feet by 2 feet LED flat panel with high brightness with glare free recessed mounted 36 Watt fittings, 240 Volts, 5700 K, Premium signature series, including all connection where required some copper conductor 1.5 sqmm, complete all as specified and as directed by the Engineer-in-Charge. Make:- Crompton Cat Part No. LCTRI-36-CDL or equivalent manufacturers mentioned in list of manufacturers
S&F Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, with efficiency not less than 120 Lumen/Watt, both side connection all as specified and as directed. Make of batten : Havells Cat Part No. Regal batten 8UPT001X22WSSBSWH / Crompton Cat Part No. IGP131LT8-16 / Philips Cat Part No. TMC501P1XTLED22WP3241 Make of tube rod : Havells Cat Part No. Crystal 1213T8DSTL20W LED 865 GLASS / Crompton Cat Part No. LG-T8-20-865-2 / Philips Cat Part No. Essential LED tube 1200mm 20W865T865T81ND-1 or other manufacturers in the approved price list.
S&F LED mirror light 1 x 10W/12W Watt, with efficiency of 120 Lumen/Watt, Wall/Surface mounted luminaries with engineering plastic housing, wired with all accessories complete incl provn of flexible copper wire from ceiling rose to light fitting terminal. Make :- Crompton Cat No. LDL-10-WW / Luker Cat Part No. LTSM10 / Philips B No 21LED12S or equivalent model of other manufacturers in the approved list.
S&F in repair Building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 30 Watt, with efficiency not less than 120 Lumen/Watt including suitable GI bracket of 25 mm dia (max 1.2m) with fixing arrangement on walls all as specified and directed . Make:- Crompton Cat Part No. LSTS-30-CDL/NL-M or equivalent model of other manufacturers in the approved list.
S&F Power Unit 25 Amp modular type for AC complete all as specified and as directed. Make:- Havells Cat Part No AHOO002504 or equivalent model of other manufacturers in the approved list.
S&F Vertical type Geyser (Water Storage Heater) 25 litres, 230 volt., 50 Hz, working pressure 0.8 map with storage tank of mild steel material 5 star rating including necessary grouting complete all as specified and directed. Make:- V-Guard Cat Part No. SPRINHOT PLUS / Crompton / Bajaj / Resold or equivalent model of other manufacturers mentioned in list of approved manufacturers
S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed. Make:- Havells - Turbo force SP or equivalent model of manufacturers mentioned in list of manufacturers
M&L submain wiring with 2 single core 4 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 4 Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connecting with suitable size thimble complete all as specified and as directed. Note: Two runs of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length
M&L for sub main wiring with 2 runs of 6 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 6 Sqmm (FRLS) cable as earth continuity wire in and including PVC conduit/ casing capping on wall with all accessories complete all as specified and directed. Note :- Two runs of 6 sqmm FRLSH and one run of 6 sqmm FRLSH copper conductor and one run of PVC conduit shall be measured as one unit length
M&L for 4mm dia galvanised iron or steel wire Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounded from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electrode connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as protection pipe for GI wire connected main control board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel, wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion complete all as specified & directed
M&L in repair earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth strip 25x4 mm upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 of SSR part I connected to earthing test point complete all as specified and indicated including testing on completion including taking out old earthing complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber, RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI med grade earth lead protection pipes with funnel and wire mesh all complete all as specified and directed.
S&F in repairs on wall/ floor concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 25 mm dia complete all as specified and directed.
S&F in repairs on wall/ floor concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 20 mm dia complete all as specified and directed.
M&L for CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed
M&L for CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.
S&F Bib cock, CP quarter turn with flange and aerator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed. Make :- Model No F2004152 of Cera or equivalent manufacturers mentioned in list of manufacturers
S&F 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for CPVC pipe complete specified and as directed. Make :- Model No: F2004201 of Cera or equivalent manufacturers mentioned in list of manufacturers
S&F Concealed stop cock regular body, Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm and taking down old unserviceable one, complete all as specified and as directed by the Engineer-in-charge. Make:- Model NO: F1020362 of Cera or equivalent manufacturers mentioned in list of manufacturers
S&F health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed. Make : - Model No: F8030102 of Cera or equivalent manufacturers mentioned in list of manufacturers
S&F self closing angle cock pressure for urinal with wall flange and 200 all as per specified and directed. Make :- Model No: F9020203 of Cera or equivalent manufacturers mentioned in list of manufacturers
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres, hoisted & fixed in position with all accessories complete all as specified and directed.
S&F Float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and fly nut complete all as specified and directed.
S&F swivel overhead shower of PTMT any colour with shower arm, 80 mm dia (3”) with, 200 mm (8”) long shower arm and wall flange and all as specified and as directed by the Engineer -in-Charge. Make:- Cat Part No. F7020108AB of Cera or other manufacturers in the approved price list.
S&F health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed. Make : Model No: F8030108AB of Cera or other manufacturers in the approved price list.
Supply and fixing two way angle cock with flange 15 mm, chromium plated for fixing with CPVC pipe complete specified and as directed by the Engineer-in-charge. Make : Model No: F1018211 of Cera or other manufacturers in the approved price list.
S&F Wall mixer (3- in - 1) with arrangement of both Telephonic shower and over head shower with 210 mm long bend pipe and taking down old unserviceable one complete all as specified and as directed by the Engineer in Charge . Make :- CERA Model : F1018403 or other manufacturers in the approved price list.
S&F PVC connection pipe 16mm dia (outer 450mm long cold water and complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed by the Engineer-in-charge.
K A ANTONY & SONS
WELTRONENGINEERINGSERVICES
Anjaneya Builders and Designers
REIGN CONSTRUCTIONS
MS BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .