Maintenance and repairs to Lighthouse Tower, Buildings and Compound wall, granite flooring inside LH tower, fixing of concertina coil on compound wall etc, at Pudimadaka Lighthouse Station

Amount

Jungle clearance including up-rooting of rank vegitation,grass,bush wood,sapling and trees not exceeding 30 cm grith including deposing the debris within a lead of 50 m and as directed including suply of all labour, tools & plants and all other charges etc. complete.

SE paint two coats on previously painted exterior surface of L.H. tower in bands with synthetic enamel paint of approved quality and colour to give an even shade over a coat of oil bound primer includinig cleaning the surface of all dirt, dust and other foreign matter and sand papering, as required, all as per direction and as per standard specification including cost of all labour, materials, tools and plants, scaffolding, bosum chair, and all other charges etc. complete. (Make Asian paints Apcolite Hi-Gloss enamel/Bergr Luxol Hi-Gloss enamel)

Plastic emulsion paint two coats of approved quality and colour on inside surfaces of LH tower after removing of existing distemper paint to give an even shade after thoroughly wire brushing the surface to remove all dirt, mortar drops and remains of loose powdered materials, preparing the surface even and sand paper smooth , applying wall putty at all heights and wherever directed all as per standard specification and as directed, including cost of all materials, labour, tools and plants, necessary scaffolding, and all other charges etc. complete. (Make Asian paints/Bergr )

WPC paint two coats of approved quality and shade on previously painted wall surfaces of building and compound wall surfaces to give an even shade after thoroughly wire brushing the surface to remove all dirt, mortar drops and remains of loose powdered materials and all as directed and as per standard specification including cost of all materials, labour, tools & plants, curing, scaffolding and all other charges etc. complete. (Make Snowcem plus)

Acrylic Distemper two coats of approved quality and colour on previously painted biulding inside surfaces to give an even shade after thoroughly wire brushing the surface to remove all dirt, mortar drops and remains of loose powdered materials, preparing the surface even and sand paper smooth, applying wall putty at all heights and wherever directed all as per standard specification and as directed, including cost of all materials, labour, tools and plants, necessary scaffolding, and all other charges etc. complete.(Make Asian paints/Bergr)

S E paint two coats on previously painted doors & windows of approved quality and colour to give an even shade after cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping all as directed and as per standard specification including cost of all materials, labour, tools and plants, scaffoldiing and all other charges etc. complete. (Make Asian paints Appcolite Hi-Gloss enamel/Bergr Luxol Hi-Gloss enamel)

Aluminium paint two coats of approved quality and colour on previously painted stairecase hand rail in LH tower after chipping, scraping the rusted portions, cleaning the surface with emery paper all as directed and as per standard specification including cost of all materials, labour, tools and plants, scaffolding, and all other charges etc. complete. (Make Asian paints/Bergr)

Providing and laying vitrified floor tiles in size(600mm x 600mm) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Make Somay, Kazaria, Johanson)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.including supply of all material,labours, tools & plants and all other charges etc., complete. (Make Somay, Kazaria, Johanson)

Plaster in patches of 2.50 m.sq. and under, and 15 to 20 mm thick with cement mortor 1:3 (1 cement:3 coarse sand), cutting the patch in proper shape, after preparing the concrete & masonry surfaces good for plastering, disposal of debris within a lead of 50 m all as directed including cost of all materials, labour, tools & plants, scaffolding, curing and all other charges etc. complete.

Replacing of window glazed panes of 5 mm thick, after removing damaged/cracked glazed panes with bedded in putty and fixed with wooden beadings of 15x15 mm size, disposiing of debris within a lead of 50 m all as directed including cost of all materials, labour, tools and scaffolding, and all other charges etc. complete.

provision beadings to 15 mmx15mm size of teakwood for window glazed panes after removing old and deteriorated putty completely, cleaning the surface and glazed panes are fixed in position with panel pins and applying new putty as directed including supply of all materials, labour, tools & plants etc.,complete.

Providing & fixing new netlon mesh fly proof shutters in windows after removing old deteriorated/unserviceble netlon mesh in window shutters of approved quality, fixed in wooden frames with 15 mm wooden beading, and as directed including cost of all materials, labour, tools and plants and all other charges etc. complete.

Replacement of netlon mesh after remving old and unserviceble wired mesh in meat safe of approved quality, fixed in frames with 15 mm wooden beading, and as directed including cost of all materials, labour, tools and plants and all other charges etc. complete.

Touch wood polishing for wooden cup-board shutters to give smooth finish, applying putty wherever necessary, prepare the surface good for touch wood polishing with sand paper and as directed including cost of materials, labour, tools & plants and all other charges etc. complete.

Replacement of door and window fittings & fixtures after removing carefully the existing damaged/broken fittings and fixtures without damaging the other parts and replacing with new Anodised Aluminum fittinigs/fixtures of heavy duty with C.P. brass screws and as directed including cost of all materials, labour, tools & plants and all other charges etc. complete.

Al Tower bolt 250 mm

Al Drop bolt 125 mm

Al. Butt hinges 100 mm

Al. Handle 100 mm

Al. Aldrop 230 mm

Providing and laying 25 mm Ǿ U-PVC water supply pipeline with specials, necessary earth work excavation, refilling the trenches after completion of work and as directed including cost of all materials, labour, tools & plants, checkiing the waterline for leakage and all other charges etc. complete (making holes in walls etc.)

providing and placing on terrace polyethylene water storage tank with Three layer approved manufacture (sintex)Is:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlit, outlet and overflow pipes with fittings &fixture connecting to existing water supply line and as directed and the base support for tank,including cost of all materials, labour, tools & plants and all other charges etc. complete.

1000 lt Capacity

Providing & fixing sanitary items

Providing and fixing vitreous china Wash down water closet (europin type W.C. Pan) with 10 litre low level P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required including supply of all labours, materials, tools etc. complete as directed by the engineer in charge including fittings & fixtures , supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock,32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin of approved brand( Cera/ parryware ) , size 550x400 mm with single 15 mm PTMT pillar cock.including cost of all materials, labour, tools & plants and all other charges etc. complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including cost of all labour, materials, tools & plants etc., and all other charges complete

Providing and fixing C.P. Brass Towel rail of size 750mm long, 20mm dia with C.P. Brass screw and brackets etc. including cutting, threading, fixing in position all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete.

Providing and fixing C.P. Brass soap dish holder 138 x 102 mm with brass screws and C.P. brass brackets etc., including fixing in position as directed including cost of all labour, materials, tools & plants etc., and all other charges complete.

Providing water supply of C.P. Brass fittings and fixtures of heavy duty of approved quality fixing in position and as per requirement of water supply line and as directed including cost of all materials, labour, tools & plants and all other charges etc. complete.

32 mm dia G.M. Gate valve.

25 mm dia G.M. valve/stop cock.

15 mm dia G.M. stop cock.

Cleaning of septic tank by bailing out water by pumping, removal of sludges and residues as directed, closing the sludge in a pit and disposal of debris within a lead of 50 m, removinig the obstruction in the manhole and sewer lines removing the grass/bush at leas t1.00 m wide around the water sump replacing the cover of septic tank immediatly, and as directed including cost of all labour, tools & plants, and all other charges etc. complete.

Providing edge moulding to 18 mm thick granite stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge.

Brick work with burnt clay bricks of approved quality as per I.G.1977 in cement mortor 1:4 (1 cemenr:4 coarse sand) including scaffolding,curing,simultaneously pointing wherever required below and above ground level etc., complete and as directed, suply of all materials,labour, tools & plants and all other charges etc. complete.

20 mm thk plastering on newly construct masonary wall & main gate pier's exposed surface of concrete faces and brick wall masonary for all level with cement mortor 1:3 (1 cement: 3 coase sand) in one layer after prepaing the surace good for plastering and as directed including cost of all materials, labour, tools & plants, scaffolding, curing and all other charges etc. complete.

Providing & laying Cement concrete with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including dismentling of the exiting copping ,chipping,grouting for anglers, compacting, placing in position, curing up-to floor two height and finishing complete.Centering and shuttering including strutting, propping etc. and removal of form for all heights including cost of all materials,labours, tools & plants and all other charges etc., complete.

Supply & fixing structural steel work in single section with 50x50x6 mm angle iron in required shape for concertina coil on existing compound wall 2.85 m apart and make necessary provision for horizontal R.B.T. reinforced barbed wire, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer (zinc chromite) including cost of all materials,labours, tools & plants and all other charges etc., complete as per drawing and approved by Engineer In-Charge.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia having 50 nos rounds per 6 metre length, upto 3 m height of wall with 50x50x6 mm angle iron in required shaped placed 2.85 m apart and with 13 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre including cost of all materials,labours, tools & plants and all other charges etc., complete.

Earth work excavation in trenches for foundation not exceeding 1.5 m width on plan incuding dressing of sides and ramming of bottoms lift up-to 1.5 m including getting out the excavated earth soil and disposal of surplus excavated earth soil as directed within a lead of 50 m including filling the sides of trenches after foundation work with surplus earth, cost of all materials,labour, tools & plants and all other charges etc. complete.

Providing Dry stone packing of required thickness under floors, ramps, roads and pathways as per drawing and wherever directed with approved 1st quality stone, by proper hand packing, consolidation by rolling/ramming as required filling interstices with spalls and sand all as per standard specifications and as directed, consolidating to required gradient and camber, watering including cost of all labour, materials, tools and plants etc., and all other charges complete.

Providing and laying cement concrete 1:3:6 (1 cement: 3 Coarse sans: 6 Hard granite stone aggregate of 20 mm down gauge of approved quality) under foundation trenches including mixing,laying,ramming,curing etc., and as directed, suply of all materials,labour, tools & plants and all other charges etc. complete.

Construction of uncoarsed rubble masonry for foundation & plinth with HBG stone of approved quality with cement mortor 1:5 ( cement, 5 sand ) including providing necessary suitable boud/through stores of approved quality and size evenly placed at the rate of two per sqm area below ground level and whenever required and ramming out joints etc. including supply of all labour, materials, tools etc complete.

Supplying, cutting, bending, placing in position, binding of tested Tor Steel reingorcement of approved quality for R.C.C. work as per drawing and as directed at all heights including cost of all labour, materials, tools and plants etc., complete. ( 10 mm dia 2 nos & 6 mm dia bars @ 200 mm c/c)

providing and laying cement concrete 1:1½:3 ( 1 cement, 1½ coarse sand, 3 stone aggregate 20 mm down gauge of approved quality ) for R.C.C. works as per drawing at all heights including mixing, laying, consolidation with approved vibtator, curing etc., all as per standard specifications, fixing conduits for concealed wiring and junction boxes, providing fan hooks and leaving holes as required all as directed and as per drawing including form works, cost of all labour, materials, tools and plants etc., complete. (Excluding cost of all reinforcement, conduits for concealed wiring and junction boxes)

supplying & fixing of main gate as per drawing including all welded, required 1st quality heavy duty GI pipes, flats,plates,fittings and fixtures of approved quality &fixed in position and asdirected including supplying of all materials, labours, transportation, loading & unloading, tools & plants and all othercharges etc. complete. (size 3.6 Mx1.65 M ) ( vide sanction estimate No.31/3/2002-Ms,vol-III, dated 17-02-2016 for the work of construction of Approach Road at sacramento Lighthouse station-Item No. 18 (a)

Main gate (3.60 x 1.50) mt

Wicket gate (0.90 x 1.50) mt

Providing and fixing Granite Name board of lighthouse in enterence size 0.45m x 1.8m. 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture granite stone of required size and shape of approved shade, colour and texture in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse: sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups complete etc. all as directed and as per standard specification including cost of all materials, labour, tools & plants and all other charges etc. complete.

ARP ENTERPRISES

SAI KRISHNA ASSOCIATES