Construction of PHC Building at Patrapali under and at Kadobahal under Attabira block in the District of Bargarh Odisha

Construction of PHC Building at Patrapali under and at Kadobahal under Attabira block in the District of Bargarh Odisha.

Please Enable Macros to View BoQ information

GENERAL ABSTRACT

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT KADOBAHAL, ATTABIRA BLOCK, BARGARH, ODISHA

SAY Rs.

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT KADOBAHAL, ATTABIRA BLOCK, BARGARH, ODISHA

BILL OF QUANTITIES

Dismantling brick or stone masonry in cement mortar 3m. Height including stacking the useful materials for reuse and removing the debris within 50m. Lead.

Dismentaling & removing R.C.C columns beams, slab, staircase, landing, lintels, including stacking the useful materials for the reuse and removing the debries within 50 m lead.

Dismentaling & removing Doors, Windowss and ventilators including Removal of frame, hinges, fastening and stacking the useful materials for the reuse and removing the debries within 50 m lead.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings, and trees girth upto 300 mm, removal of slumps of trees cut earlier and disposal of unserviceable materials and stacking of servicable materials to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per the direction of the Engineer-in-charge.

Earth work in excavation of foundation in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

Filling in foundation trenches and plinth, with excavated earth in layers including watering and ramming with all leads & lifts including cost of all labour, T&P complete as directed by the Engineer-in-charge.

Construction of embackment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision).

Supplying & filling foundation and plinth with good quality river sand well watered and rammed including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm size hard granite C.B. metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone- III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Based on DAR-V1-2023-Item No. 4.17 Page-195

Providing 2.5cm thick Damp Proof Course with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of wall including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing and applying of pre-construction Anti-Termite treatment specification and the holes should be pluged with filling materials including cost of all materials, labour charges, conveyance and all taxes, hire charges of machinaries etc. complete as per direction of Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Ground Floor

Providing HYSD reinforcement of approved quality confirming to grade Fe-550D for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete with labour cess, including 5% overlaaping & wastage etc. as directed by the Engineer-in-charge.

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in foundation and plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Ground Floor

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Ground Floor

Head Room

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Ground Floor

Head Room

Providing 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of Engineer-in-charge.

Ground Floor

Head Room

Providing 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Ground Floor

Head Room

Providing 6mm thick C.P.(1:4) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Ground Floor

Head Room

Providing 12 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls punning including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor

Supplying, fitting and fixing Vitrified tiles (600x600) in floors of approved make conforming to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Vitrified tiles (600x600) in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Ceramic tiles (300x300) in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Ceramic tiles (300x450) in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Chequred tiles in floors of approved make conformaing to IS:13755 laid on 25 mm thick cement mortar (1:1) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Finishing plastered wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Inside

Ground Floor

Head Room

Outside

Ground Floor

Head Room

Priming one coat with Wall Primer water bond cement primer including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Inside

Ground Floor

Head Room

Out side

Ground Floor

Head Room

Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Head Room

Wall painting two coat with any approved Weather coat paint including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Head Room

Supplying and fitting-fixing of M.S work wrought and put up in grated doors windows & cage latrines as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Supplying and fitting-fixing of two rack Un-plasticised Poly Vinyl Chloride (UPVC) sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying and fitting-fixing of factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Supplying and fitting-fixing of factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge.

Supplying and fixing of Powder coated 50-60 microns approved colour of Aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass of make-Saint gobain/AIS/Gardian/modi. the rate quoted inclusive of hardwares like antilift,roller, Espag lock cum handle,epdm gaskets,T mullion ,Fly Mullion ,bottom adopter ,mid transom ,glazing clip for 12 mm glass felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealant in the outer side. Casement Door Outer frame - 40mm x 45.3mm Series x 1.4mm thickness, Fly mullion - 44 x 60 mm x 1.4mm thickness, T Mullion 40 x 78.4mm x 1.4mm thickness, Transom - 40.28 x 125.8 x 1.75 mm thickness, Bottom adopter - 34.6 x 26 x 1.5mm thickness, including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per direction of Engineer-in-Charge.

Priming one coat with Red Oxide primmer including cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Painting two coats with approved Enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge.

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per specification & direction of Engineer-in-charge.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete as per specification & direction of Engineer-in-charge.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design as per specification & direction of Engineer-in-charge.

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, color and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRC SP-63:2018 as directed by the Engineer-in-Charge.

Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm 150mm of M-30 grade of approved make, design, color and size made by block making machine with proper compaction fixed in required pattern etc. complete in all aspect confirming to IS 5758:1984 as directed by the Engineer-in-Charge.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C projections. DAR-2023-V-1-Item No. 5.30 Page No. 287

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm mesh and 300 mm wideth for construction joints and chasing in brick work for electrical conduits or water supply pipes including cement slurry and pegs/nails with nailing machine as required before pastering etc. complete .

GRAND TOTAL

Providing and fixing Clorinated Polyvinyl Chloride [CPVC] pipes SDR-11 conforming to IS:15778, having thermal stablity for hot & cold water supply , including all CPVC plain & brass threaded fittingincluding fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes and fittings with one stp CPVC solvent cement and testing of joints complete as per specification and direction of Enfineer-in-charge.

20 mm PVC sch-80 pipes

25 mm PVC sch-80 pipes

32 mm PVC sch-80 pipes

50 mm PVC sch-80 pipes

Supplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification.

250mm Thick

Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including for passing GI / PVC pipes and fittings etc. and repairing the holes after insertion of pipes etc. with cement concrete 1:2:4 including finishing complete to make it leak proof leak to the damages all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification.

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge.

Supplying fitting fixing of C.P health facuet high pressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification.

15mm dia CP Health Faucet of 1mtr long PVC tube

Providing and fixing of Rational moulded polyethylene cylendrical vertical water storate tanks confirming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and proviidng extra sockets and jam nuts , fixing ball volve ete. including hoisting up to a hite of 5.00metes above ground level and placing the tank to the required position etc. all complete as per specification and direction of the engineer-in-charge.

1000 litre capacity water storage tanks

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.

110mm diameter PVC SWR pipes

75mm diameter PVC SWR pipes

110mm PVC door Tee

75mm PVC door Tee

110mm PVC offset

110mm PVC door bend

75mm PVC door bend

110mm PVC plain shoe bend

75mm PVC plain shoe bend

110mm PVC vent cowl

75mm PVC vent cowl

110mm S-trap

110mm P-trap

110mm SWR Pipe Clip

75mm SWR Pipe Clip

Supplying all materials,labour and T&P for fixing of PVC 10 ltr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification.

10 Liters capacity PVC cistern

Supplying all materials,labour and T&P for fixing water closet ,squatting pan(Indian type.W.C.pan or Orissa pan) confirming to IS 2556 : Part-3-2004 duly embedded in cement concrete (1:4:8) using 40mm.nominal size h.b.g. chips [including foot rest for I.W.C. and trap] all complete as per specificationand directon of theEngineer - in - charge.

Orissa Pan

Supplying all materials,labour and Supplying all materials,labour and T&P for fixing in cement mortar (1:3) a pair of white vitereous china (250x130x30mm.) foot rest for squatting water closet. etc. all complete as per specificationand direction of the Engineer-in-charge.

Foot Rest -

Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral "S" or "P" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.

EWC with 'p' / S trap stanard size-

Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. All complete as per specification .

600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion)

Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed with chromium plated brass brackets fixed to wooden plugs with cromium plated brass screws complete as per specification.

CP towel rail-

Supplying all materials,labour and T&P for fixing of cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws as per specification.

CP soap dish-

Supplying all materials,labour and T&P for fixing standard size C. P. towel ring fixed fixed to wooden plugs with cromium plated brass screws complete as per specification.

Supplying all materials,labour and T&P for fixing of liquid soap container - glass container or plastic container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws as per specification.

Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good to the walls etc. all as per specification including cost of sink with all accessories.

Supplying fitting fixing of cromium plated CP over head shower rose with arm including polishing and complete as per specification and direction of the Engineer in charge. (Make-Somany/Cera/Hindware)

Supplying all labour and T&P for fixing CP Concealed stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete. (Make-Hindware/Cera/Somany)

Supplying all materials,labour and T&P for fixing Porcelain Flat Back Stall Type Urinal respectively with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification. (Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing Drinking Water Purifier etc. all complete as per specification.

Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification and direction of the Engineer in charge.

Supply and fixing of Geyser 2000 Watt (10 Lit.) of approved brand complete as per specification and direction of the Engineer in charge. (Make-Bjajaj/Crompton/V Guard or Equivalent Brand)

Supplying fitting fixing of cromium plated CP Wall Mixture 2 in 1 with out Telephonic Shower with arm including polishing and complete as per specification. (Make-Hindware/Cera/Somany)

Total Rs.

Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.

250mmx250mm with RCC cover

Constructing inspection chamber with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Inspection Chamber inside size 750mm x 750mm and 450mm

Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes.

Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Construction of 50 Users Septic Tank

Constructing RCC soak way pit with R.C.C top slab in (1:2:4) mix, inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, complete as per specification.

Sub Total Rs.

Borewell

Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89

Sub Total Rs.

Total Rs.

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT KADOBAHAL, ATTABIRA BLOCK, BARGARH, ODISHA

FIRE EXTINGUISHER

Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge.

Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.

Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.

Fire Extinguishers Signage.

Supplying and installing at approved location approved make fire buckets (4 nos./set) of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and black on the bottom, inscribed with letters '' FIRE'' in black and gold with dry clean fire sand. The scope shall also include the stand for mounting the sand bucket.

TOTAL

GENERAL ABSTRACT

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT PATRAPALI, ATTABIRA BLOCK, BARGARH, ODISHA

SAY Rs.

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT PATRAPALI, ATTABIRA BLOCK, BARGARH, ODISHA

BILL OF QUANTITIES

Dismantling brick or stone masonry in cement mortar 3m. Height including stacking the useful materials for reuse and removing the debris within 50m. Lead.

Dismentaling & removing R.C.C columns beams, slab, staircase, landing, lintels, including stacking the useful materials for the reuse and removing the debries within 50 m lead.

Dismentaling & removing Doors, Windowss and ventilators including Removal of frame, hinges, fastening and stacking the useful materials for the reuse and removing the debries within 50 m lead.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings, and trees girth upto 300 mm, removal of slumps of trees cut earlier and disposal of unserviceable materials and stacking of servicable materials to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per the direction of the Engineer-in-charge.

Earth work in excavation of foundation in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

Filling in foundation trenches and plinth, with excavated earth in layers including watering and ramming with all leads & lifts including cost of all labour, T&P complete as directed by the Engineer-in-charge.

Construction of embackment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision).

Supplying & filling foundation and plinth with good quality river sand well watered and rammed including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm size hard granite C.B. metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone- III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Based on DAR-V1-2023-Item No. 4.17 Page-195

Providing 2.5cm thick Damp Proof Course with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of wall including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing and applying of pre-construction Anti-Termite treatment specification and the holes should be pluged with filling materials including cost of all materials, labour charges, conveyance and all taxes, hire charges of machinaries etc. complete as per direction of Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Head Room

Ground Floor

Ground Floor

Providing HYSD reinforcement of approved quality confirming to grade Fe-550D for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete with labour cess, including 5% overlaaping & wastage etc. as directed by the Engineer-in-charge.

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in foundation and plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Ground Floor

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Ground Floor

Head Room

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Ground Floor

Head Room

Providing 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of Engineer-in-charge.

Ground Floor

Head Room

Providing 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Ground Floor

Head Room

Providing 6mm thick C.P.(1:4) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Ground Floor

Head Room

Providing 12 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls punning including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor

Supplying, fitting and fixing Vitrified tiles (600x600) in floors of approved make conforming to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Vitrified tiles (600x600) in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Ceramic tiles (300x300) in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Ceramic tiles (300x450) in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Supplying, fitting and fixing Chequred tiles in floors of approved make conformaing to IS:13755 laid on 25 mm thick cement mortar (1:1) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Finishing plastered wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Inside

Ground Floor

Head Room

Outside

Ground Floor

Head Room

Priming one coat with Wall Primer water bond cement primer including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Inside

Ground Floor

Head Room

Out side

Ground Floor

Head Room

Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Head Room

Wall painting two coat with any approved Weather coat paint including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

Head Room

Supplying and fitting-fixing of M.S work wrought and put up in grated doors windows & cage latrines as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Supplying and fitting-fixing of two rack Un-plasticised Poly Vinyl Chloride (UPVC) sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying and fitting-fixing of factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Supplying and fitting-fixing of factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge.

Supplying and fixing of Powder coated 50-60 microns approved colour of Aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass of make-Saint gobain/AIS/Gardian/modi. the rate quoted inclusive of hardwares like antilift,roller, Espag lock cum handle,epdm gaskets,T mullion ,Fly Mullion ,bottom adopter ,mid transom ,glazing clip for 12 mm glass felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealant in the outer side. Casement Door Outer frame - 40mm x 45.3mm Series x 1.4mm thickness, Fly mullion - 44 x 60 mm x 1.4mm thickness, T Mullion 40 x 78.4mm x 1.4mm thickness, Transom - 40.28 x 125.8 x 1.75 mm thickness, Bottom adopter - 34.6 x 26 x 1.5mm thickness, including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per direction of Engineer-in-Charge.

Priming one coat with Red Oxide primmer including cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Painting two coats with approved Enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge.

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per specification & direction of Engineer-in-charge.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete as per specification & direction of Engineer-in-charge.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design as per specification & direction of Engineer-in-charge.

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, color and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRC SP-63:2018 as directed by the Engineer-in-Charge.

Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm 150mm of M-30 grade of approved make, design, color and size made by block making machine with proper compaction fixed in required pattern etc. complete in all aspect confirming to IS 5758:1984 as directed by the Engineer-in-Charge.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C projections. DAR-2023-V-1-Item No. 5.30 Page No. 287

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm mesh and 300 mm wideth for construction joints and chasing in brick work for electrical conduits or water supply pipes including cement slurry and pegs/nails with nailing machine as required before pastering etc. complete .

GRAND TOTAL

Providing and fixing Clorinated Polyvinyl Chloride [CPVC] pipes SDR-11 conforming to IS:15778, having thermal stablity for hot & cold water supply , including all CPVC plain & brass threaded fittingincluding fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes and fittings with one stp CPVC solvent cement and testing of joints complete as per specification and direction of Enfineer-in-charge.

20 mm PVC sch-80 pipes

25 mm PVC sch-80 pipes

32 mm PVC sch-80 pipes

50 mm PVC sch-80 pipes

Supplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification.

250mm Thick

Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including for passing GI / PVC pipes and fittings etc. and repairing the holes after insertion of pipes etc. with cement concrete 1:2:4 including finishing complete to make it leak proof leak to the damages all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification.

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge.

Supplying fitting fixing of C.P health facuet high pressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification.

15mm dia CP Health Faucet of 1mtr long PVC tube

Providing and fixing of Rational moulded polyethylene cylendrical vertical water storate tanks confirming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and proviidng extra sockets and jam nuts , fixing ball volve ete. including hoisting up to a hite of 5.00metes above ground level and placing the tank to the required position etc. all complete as per specification and direction of the engineer-in-charge.

1000 litre capacity water storage tanks

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.

110mm diameter PVC SWR pipes

75mm diameter PVC SWR pipes

110mm PVC door Tee

75mm PVC door Tee

110mm PVC offset

110mm PVC door bend

75mm PVC door bend

110mm PVC plain shoe bend

75mm PVC plain shoe bend

110mm PVC vent cowl

75mm PVC vent cowl

110mm S-trap

110mm P-trap

110mm SWR Pipe Clip

75mm SWR Pipe Clip

Supplying all materials,labour and T&P for fixing of PVC 10 ltr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification.

10 Liters capacity PVC cistern

Supplying all materials,labour and T&P for fixing water closet ,squatting pan(Indian type.W.C.pan or Orissa pan) confirming to IS 2556 : Part-3-2004 duly embedded in cement concrete (1:4:8) using 40mm.nominal size h.b.g. chips [including foot rest for I.W.C. and trap] all complete as per specificationand directon of theEngineer - in - charge.

Orissa Pan

Supplying all materials,labour and Supplying all materials,labour and T&P for fixing in cement mortar (1:3) a pair of white vitereous china (250x130x30mm.) foot rest for squatting water closet. etc. all complete as per specificationand direction of the Engineer-in-charge.

Foot Rest -

Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral "S" or "P" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.

EWC with 'p' / S trap stanard size-

Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. All complete as per specification .

600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion)

Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed with chromium plated brass brackets fixed to wooden plugs with cromium plated brass screws complete as per specification.

CP towel rail-

Supplying all materials,labour and T&P for fixing of cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws as per specification.

CP soap dish-

Supplying all materials,labour and T&P for fixing standard size C. P. towel ring fixed fixed to wooden plugs with cromium plated brass screws complete as per specification.

Supplying all materials,labour and T&P for fixing of liquid soap container - glass container or plastic container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws as per specification.

Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good to the walls etc. all as per specification including cost of sink with all accessories.

Supplying fitting fixing of cromium plated CP over head shower rose with arm including polishing and complete as per specification and direction of the Engineer in charge. (Make-Somany/Cera/Hindware)

Supplying all labour and T&P for fixing CP Concealed stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete. (Make-Hindware/Cera/Somany)

Supplying all materials,labour and T&P for fixing Porcelain Flat Back Stall Type Urinal respectively with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification. (Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing Drinking Water Purifier etc. all complete as per specification.

Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification and direction of the Engineer in charge.

Supply and fixing of Geyser 2000 Watt (10 Lit.) of approved brand complete as per specification and direction of the Engineer in charge. (Make-Bjajaj/Crompton/V Guard or Equivalent Brand)

Supplying fitting fixing of cromium plated CP Wall Mixture 2 in 1 with out Telephonic Shower with arm including polishing and complete as per specification. (Make-Hindware/Cera/Somany)

Total Rs.

Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.

250mmx250mm with RCC cover

Constructing inspection chamber with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Inspection Chamber inside size 750mm x 750mm and 450mm

Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes.

Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Construction of 50 Users Septic Tank

Constructing RCC soak way pit with R.C.C top slab in (1:2:4) mix, inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, complete as per specification.

Sub Total Rs.

Borewell

Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89

Sub Total Rs.

Total Rs.

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT PATRAPALI, ATTABIRA BLOCK, BARGARH, ODISHA

FIRE EXTINGUISHER

Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge.

Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.

Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.

Fire Extinguishers Signage.

Supplying and installing at approved location approved make fire buckets (4 nos./set) of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and black on the bottom, inscribed with letters '' FIRE'' in black and gold with dry clean fire sand. The scope shall also include the stand for mounting the sand bucket.

TOTAL

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT KADOBAHAL, ATTABIRA BLOCK, BARGARH, ODISHA

PROPOSED BUILDING - GROUND FLOOR

C/C LENGTH

X-AXIS WALL

Y-AXIS WALL

COLUMN

ROOM SIZE

W/C ROOM

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

PATH LAB

O-PASSAGE

COLLECTION

STAIRCASE

TOILET

DAY CARE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

W/C ROOM

MEDICAL OFFICER 2

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

LANDING

ENTRY STEP-1

ENTRY STEP-2

PORTICO

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings, and trees girth upto 300 mm, removal of slumps of trees cut earlier and disposal of unserviceable materials and stacking of servicable materials to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per the direction of the Engineer-in-charge.

Building Area

Total Qty.

Earth work in excavation of foundation in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

Upto 1.50Mt. Depth

Footing

Wall Foundation, Step & Ramp

For Wall Foundation

ENTRY STEP-1

ENTRY STEP-2

LANDING

TOTAL=

Deduction

TOTAL=

Total Qty.

Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials as per the direction of the Engineer-in-charge. (Above 1.5m depth)

Above 1.50Mt. Depth

Footing

Total Qty.

Filling in foundation trenches and plinth, with excavated earth in layers including watering and ramming with all leads & lifts including cost of all labour, T&P complete as directed by the Engineer-in-charge.

Excavated Earth Qty.

TOTAL=

Deduction

Ded. PCC Below Foundation

Ded. Wall Foundation

Ded. Footing RCC

Ded. Column RCC upto G.L

TOTAL=

Total Qty.

Supplying & filling foundation and plinth with good quality river sand well watered and rammed including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Below Flooring

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

PATH LAB

O-PASSAGE

COLLECTION

STAIRCASE

TOILET

DAY CARE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

W/C ROOM

MEDICAL OFFICER 2

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

ENTRY STEP-1

ENTRY STEP-2

PORTICO

Inside Ramp

Below Intermediate Wall

Below Footing

For Wall Foundation

TOTAL=

Deduction

TOTAL=

Total Qty.

Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm size hard granite C.B. metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Below Flooring

For Wall Foundation

LANDING

PCC Below Plinth Beam

ENTRY STEP-2

TOTAL=

Deduction

TOTAL=

Total Qty.

Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Inside Building Area

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

PATH LAB

O-PASSAGE

COLLECTION

STAIRCASE

TOILET

DAY CARE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

W/C ROOM

MEDICAL OFFICER 2

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

LANDING

ENTRY STEP-1

ENTRY STEP-2

PORTICO

For Wall Foundation

LANDING

PCC Below Plinth Beam

ENTRY STEP-1

ENTRY STEP-2

TOTAL=

Deduction

TOTAL=

Total Qty.

Providing and applying of pre-construction Anti-Termite treatment specification and the holes should be pluged with filling materials including cost of all materials, labour charges, conveyance and all taxes, hire charges of machinaries etc. complete as per direction of Engineer-in-charge.

Inside Building Area

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

PATH LAB

O-PASSAGE

COLLECTION

STAIRCASE

TOILET

DAY CARE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

W/C ROOM

MEDICAL OFFICER 2

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

LANDING

ENTRY STEP-1

ENTRY STEP-2

PORTICO

Total Qty.

Providing 2.5cm thick Damp Proof Course with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of wall including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

250mm Brickwall

125mm Brickwall

TOTAL=

Deduction

TOTAL=

Total Qty.

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in foundation and plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

BRICK WORK UPTO GL

FIRST FOOTING

SECOND FOOTING

THIRD FOOTING UP TO GL

LANDING

TOTAL=

Deduction

TOTAL=

BRICK WORK UP TO PLINTH

For Wall Foundation

LANDING

TOTAL=

Deduction

TOTAL=

ENTRY STEP-1

1ST STEP

2nd STEP

3rd STEP

ENTRY STEP-2

1ST STEP

2nd STEP

3rd STEP

TOTAL=

Total Qty.

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Brickwork 250 mm

Brickwork 125 mm

Chajja Sides

For Elevation Work

TOTAL=

Deduction

TOTAL=

Total Qty.

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Brickwork 125 mm

Chajja Sides

Total Qty.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Ground Floor

Pedestal

Total=

Upto G.L

TOTAL=

Upto P.L

TOTAL=

Up to Roof

TOTAL=

Total=

TOTAL=

Deduction

TOTAL=

Total=

Brickwork 125 mm

Portico

TOTAL=

Deduction

TOTAL=

Total=

FRONT PORTICO

Counter

Total=

LANDING BEAM

TOTAL=

Deduction

TOTAL=

Total=

Roof Area

TOTAL=

Deduction

Roof Beam

Staircase

TOTAL=

Total=

WAIST SLAB

LANDING

STEPS

Total=

Portico

Total=

Total Qty.

Providing HYSD reinforcement of approved quality confirming to grade Fe-550D for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete with labour cess, including 5% overlaaping & wastage etc. as directed by the Engineer-in-charge.

Ground Floor

Total Qty.

Providing 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Internal Plaster

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

PATH LAB

O-PASSAGE

COLLECTION

STAIRCASE

TOILET

DAY CARE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

W/C ROOM

MEDICAL OFFICER 2

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

LANDING

ENTRY STEP-1

ENTRY STEP-2

PORTICO

PORTICO INSIDE

Door Sill

TOTAL=

Deduction

TOTAL=

Total Qty.

Providing 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of Engineer-in-charge.

External Plaster

For Elevation Work

Chajja Sides

TOTAL=

Deduction

FRONT PORTICO

TOTAL=

Total Qty.

Providing 6mm thick C.P.(1:4) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Ceiling Plaster

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

PATH LAB

O-PASSAGE

COLLECTION

STAIRCASE

TOILET

DAY CARE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

W/C ROOM

MEDICAL OFFICER 2

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

LANDING

ENTRY STEP-1

ENTRY STEP-2

PORTICO

FRONT PORTICO

Counter

Roof Beam

Portico

Column

Total Qty.

Providing 12 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls punning including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Upto Plinth

Total Qty.

Supplying, fitting and fixing Vitrified tiles (600x600) in floors of approved make conforming to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

PATH LAB

O-PASSAGE

COLLECTION

STAIRCASE

TOILET

DAY CARE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

W/C ROOM

MEDICAL OFFICER 2

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

LANDING

ENTRY STEP-1

ENTRY STEP-2

PORTICO

Total Qty.

Supplying, fitting and fixing Vitrified tiles (600x600) in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

O-PASSAGE

COLLECTION

STAIRCASE

O-PASSAGE

ILR POINT

HEALTH & WELLNESS

MED STORE

GEN STORE

DDC ROOM

MEDICAL OFFICER 1

CORRIDER

DRESSING INJECTION

HOUSE KEEPING

CORRIDOR

ENTRANCE LOBBY

TOTAL=

Deduction

TOTAL=

Total Qty.

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

STAIRCASE

TREAD

LANDING

LANDING

ENTRY STEP-1

ENTRY STEP-2

Window Bedding

Counter

Total Qty.

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

RISER

ENTRY STEP-1

ENTRY STEP-2

LANDING

Counter

Total Qty.

Supplying, fitting and fixing Ceramic tiles (300x300) in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

TOILET

W/C ROOM

Total Qty.

Supplying, fitting and fixing Ceramic tiles (300x450) in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

W/C ROOM

W/C ROOM

DRINKING WATER

CORRIDOR

TOILET

W/C ROOM

TOTAL=

Deduction

TOTAL=

Total Qty.

Supplying, fitting and fixing Chequred tiles in floors of approved make conformaing to IS:13755 laid on 25 mm thick cement mortar (1:1) and filling joints with white cement of approved quality including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

PORTICO

Total Qty.

Finishing plastered wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Same as 12mm CP and 6mm CP (Deduct Wall Tile)

Total Qty.

Finishing plastered wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Same as 16 mm CP

Total Qty.

Priming one coat with Wall Primer water bond cement primer including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Inside

Total Qty.

Priming one coat with Wall Primer water bond cement primer including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Outside

Total Qty.

Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Inside

Total Qty.

Wall painting two coat with any approved Weather coat paint including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Outside

Total Qty.

Supplying and fixing of Powder coated 50-60 microns approved colour of Aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass of make-Saint gobain/AIS/Gardian/modi. the rate quoted inclusive of hardwares like antilift,roller, Espag lock cum handle,epdm gaskets,T mullion ,Fly Mullion ,bottom adopter ,mid transom ,glazing clip for 12 mm glass felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealant in the outer side. Casement Door Outer frame - 40mm x 45.3mm Series x 1.4mm thickness, Fly mullion - 44 x 60 mm x 1.4mm thickness, T Mullion 40 x 78.4mm x 1.4mm thickness, Transom - 40.28 x 125.8 x 1.75 mm thickness, Bottom adopter - 34.6 x 26 x 1.5mm thickness, including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per direction of Engineer-in-Charge.

Total Qty.

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Total Qty.

Supplying and fitting-fixing of factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge.

Total Qty.

Supplying and fitting-fixing of two rack Un-plasticised Poly Vinyl Chloride (UPVC) sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Total Qty.

Supplying and fitting-fixing of factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Supplying and fitting-fixing of M.S work wrought and put up in grated doors windows & cage latrines as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Grill Work

@18Kg/Sqm

Total Qty.

Priming one coat with Red Oxide primmer including cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

PAINTING OF GRILL

Total Qty.

Painting two coats with approved Enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge.

PAINTING OF GRILL

Total Qty.

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per specification & direction of Engineer-in-charge.

STAIRCASE

Taking 10.46 Kg/Rmt.

Total Qty.

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

TERRACE

Total Qty.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone- III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Based on DAR-V1-2023-Item No. 4.17 Page-195

PLINTH PROTECTION

Total Qty.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C projections. DAR-2023-V-1-Item No. 5.30 Page No. 287

FRONT

Total Qty.

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm mesh and 300 mm wideth for construction joints and chasing in brick work for electrical conduits or water supply pipes including cement slurry and pegs/nails with nailing machine as required before pastering etc. complete .

LANDING BEAM

Total Qty.

Construction of embackment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision).

SITE DEVELOPMENT

Total Qty.

TOTAL=

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT KADOBAHAL, ATTABIRA BLOCK, BARGARH, ODISHA

PROPOSED - HEAD ROOM

C/C LENGTH

X-AXIS WALL

Y-AXIS WALL

COLUMN

ROOM SIZE

STAIRCASE ROOM

WATER TANK SUPPORT

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Brickwork 250 mm

Parapet Wall

TOTAL=

Deduction

TOTAL=

Total Qty.

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Brickwork 125 mm

WATER TANK SUPPORT

Total Qty.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

TOTAL=

Total=

Total=

Total=

TOTAL=

Dduction

TOTAL=

Total=

Head Room Roof

Water Tank Base

Total=

Total Qty.

Providing HYSD reinforcement of approved quality confirming to grade Fe-550D for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete with labour cess, including 5% overlaaping & wastage etc. as directed by the Engineer-in-charge.

Terrace Floor

Total Qty.

Providing 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Internal Plaster

Inner wall X Axis

Inner wall Y Axis

TOTAL=

Deduction

TOTAL=

Total Qty.

Providing 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of Engineer-in-charge.

External Plaster

Parapet Wall

For Elevation Work

Chajja Sides

WATER TANK SUPPORT

TOTAL=

Deduction

TOTAL=

Total Qty.

Providing 6mm thick C.P.(1:4) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as directed by the Engineer-in-charge.

Ceiling Plaster

STAIRCASE ROOM

Chajja

Total Qty.

Finishing plastered wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Same as 12mm CP

Same as 6mm CP

Total Qty.

Finishing plastered wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Same as 16mm CP

Total Qty.

Priming one coat with Wall Primer water bond cement primer including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Inside

Total Qty.

Priming one coat with Wall Primer water bond cement primer including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Outside

Total Qty.

Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Same as 12mm CP and 6mm

Total Qty.

Wall painting two coat with any approved Weather coat paint including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Same as 16mm CP

Total Qty.

Supplying and fitting-fixing of two rack Un-plasticised Poly Vinyl Chloride (UPVC) sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Total Qty.

Supplying and fitting-fixing of M.S work wrought and put up in grated doors windows & cage latrines as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

@30Kg/Sqm

@18Kg/Sqm

Total Qty.

Priming one coat with Red Oxide primmer including cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

PAINTING OF GRILL

Total Qty.

Painting two coats with approved Enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge.

PAINTING OF GRILL

Total Qty.

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Head Room

Total Qty.

Terrace

Total Qty.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design as per specification & direction of Engineer-in-charge.

Terrace

Total Qty.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete as per specification & direction of Engineer-in-charge.

Terrace

Total Qty.

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm mesh and 300 mm wideth for construction joints and chasing in brick work for electrical conduits or water supply pipes including cement slurry and pegs/nails with nailing machine as required before pastering etc. complete .

Total Qty.

TOTAL=

DISMANTALING WORK

DOOR AND WINDOWS

COLUMN

ROOM SIZE

Building

BMW AREA

CC BASE

Dismantling brick or stone masonry in cement mortar 3m. Height including stacking the useful materials for reuse and removing the debris within 50m. Lead.

250 mm Wall

250 mm Wall

375 mm Wall

375 mm Wall

TOTAL=

Total Qty.

Dismentaling & removing R.C.C columns beams, slab, staircase, landing, lintels, including stacking the useful materials for the reuse and removing the debries within 50 m lead.

Footing

TOTAL=

TOTAL=

Total=

TOTAL=

Total=

Total Qty.

Dismentaling and removing old tiles flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead.

CC BASE

Total=

Dismentaling & removing Doors, Windowss and ventilators including Removal of frame, hinges, fastening and stacking the useful materials for the reuse and removing the debries within 50 m lead.

Total=

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. (DAR-2023-Page No. 85-Item No. 1.1.18)

Brick & Stone

Door & Window

CC BASE

TOTAL=

NAME OF PROJECT: CONSTRUCTION OF PHC BUILDING AT KADOBAHAL, ATTABIRA BLOCK, BARGARH, ODISHA

PROPOSED PAVER PATHWAY

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings, and trees girth upto 300 mm, removal of slumps of trees cut earlier and disposal of unserviceable materials and stacking of servicable materials to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per the direction of the Engineer-in-charge.

Paver Area

Total Qty.

Earth work in excavation of foundation in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

Paver Area

Total Qty.

Supplying & filling foundation and plinth with good quality river sand well watered and rammed including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Paver Area

Total Qty.

Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm size hard granite C.B. metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Paver Area

Total Qty.

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, color and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRC SP-63:2018 as directed by the Engineer-in-Charge.

Paver Area

Total Qty.

Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm 150mm of M-30 grade of approved make, design, color and size made by block making machine with proper compaction fixed in required pattern etc. complete in all aspect confirming to IS 5758:1984 as directed by the Engineer-in-Charge.

Kerb Stone

Total Qty.

TOTAL=

DETAIL ESTIMATE OF INTERNAL & EXTERNAL ELECTRIFICATION

INTERNAL

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FALLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.

Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .

Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated ncluding wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge.

Supplying and fixing of Energy efficient surface mounted LED luminaire square/round shape 25W as required as per direction of Engg.-in-Charge

Supplying and fixing of Energy efficient surface mounted LED luminaire square/round shape 18W as required as per direction of Engg.-in-Charge

Supplying and fixing of Energy efficient surface mounted LED luminaire square/round shape 12W as required as per direction of Engg.-in-Charge

Supplying and fixing of Energy efficient surface mounted LED luminaire square/round shape 9W as required as per direction of Engg.-in-Charge

Supplying and fixing of Energy efficient LED bettern luminaire 20W as required as per direction of Engg.-in-Charge

SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.

Supplying and fixing of Energy efficient 2 Way Up & Down LED luminaire square/round shape 12W as required as per direction of Engg.-in-Charge

Supplying and fixing of Energy efficient LED Bollard light (16W) as required as per direction of Engg.-in-Charge

Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years

Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.

Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). The RCCB should be Replacement Warranty will be 5 years

Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years

Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years

Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The RCCB should be Replacement Warranty will be 5 years

Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years

S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.

Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.

Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.

Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

LAYING OF CABLE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.

Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.

Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

TOTAL

S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.

In commer-1-01 number of 160A 4P Icu=100%Ics,0, LSIG MCCB with micro processor based release Electrical locking for normal & DG (200 KVA TRANSFORMER)

Busbar-1&2 04 numbers of 300Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)

Out going- 06 numbers of 63A 4P MCB

Out going- 1 numbers of 125A 4P Icu=50%Ics, LSIG MCCB withTMR based release with adjustable overload

Out going- 06 numbers of 32A 4P MCB

Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.

(ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.

(iii) 4 nos of 65kA SP VSD WITH 32A SP MCB

TOTAL INTERNAL ELECTRICAL AMOUNT

INTERNAL ELECTRICAL WORK

INTERNAL WIRING

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.With 10Years Warenty

Group C

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge.Average Length: 3 mtr

Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge.Group "C"

Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge.Group "C"

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.Group "C"

Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge.Group "C"

Call bell point

Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

SUB TOTAL

SUBMAIN

Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 4 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.(For Switch Board Looping)

SUB TOTAL

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 5Years Warenty)

SUB TOTAL

CABLE

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 50 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 35 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required.

SUB TOTAL

END TERMINATION

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.

3.5C x 50 sq.mm

3.5C x 35 sq.mm

4C x 16 sq.mm

SUB TOTAL

PANEL

Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete.

MAIN PANEL with 125A 4P Change over Switch 1Nos, 125A 4P MCCB 25KA -1 No as incomer, 63A 4P MCB 10KA 4Nos,80A 4P Change over Switch 1Nos, 40A 4P MCB 10KA.-2Nos, 40A DP MCB 10KA-4Nos with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB.

SUB TOTAL

EARTHING

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.

SUB TOTAL

LIGHTNING ARRESTOR

SUB TOTAL

FIXTURE

Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.With 5Years Warenty.

Ceiling mounted indoor type batten type LED Luminaire with LED Lamp.

Ceiling/ Wall mounted type BULK HEAD Luminaire.

Supply, Installation, testing and commissioning of 10W Mirror Light.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.

Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.

Supply & fixing of 18W LED Down Light (S/R) with all accessories.

Supply & fixing of LED 36w 2'x2' Surface/Recessed Mounted Light etc as required .

Supply & fixing of 6W LED Down Light (S/R) with all accessories.

Supply, Installation, testing and commissioning of wall fan of 400 mm sweep as required.Model-400mm STRIKER HI SPEED.

Supply & fixing of 40W LED Strip light with all accessories.

SUB TOTAL

PERFORATED CABLE TRAY

Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays

Size of Cable Tray :150 mm x 50 mm

SUB TOTAL

TV /TEL & DATA

Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.

Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.

Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.

Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. (Tel junction Box)

Supplying & Commissioning of Telephone Hand Set.

Supplying & installation of 100 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.

SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant.

SUB TOTAL

SAFETY EQUIPMENTS

Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.

Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.

Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .

Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.

Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.

SUB TOTAL

TOTAL INTERNAL ELECTRICAL WORK=

ABSTRACT

Total Project Cost (A+B)

SEPTIC TANK (50 USER)

Earth work in excavation of foundation in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

Total

Filling in foundation trenches and plinth, with excavated earth in layers including watering and ramming with all leads & lifts including cost of all labour, T&P complete as directed by the Engineer-in-charge.

Total

Supplying & filling foundation and plinth with good quality river sand well watered and rammed including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Total

Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm size hard granite C.B. metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Total

Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering, curing etc. complete including cost, carriage, royalty, cost of all labour as directed by the Engineer-in-charge.

Total

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Total

Providing HYSD reinforcement of approved quality confirming to grade Fe-550D for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete with labour cess, including 5% overlaaping & wastage etc. as directed by the Engineer-in-charge.

Kg/Cum

Total

Total

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in foundation and plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour as directed by the Engineer-in-charge.

Total

Providing 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of Engineer-in-charge.

Total

Providing 12 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls punning including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Total

Unskilled

Semi skilled

Skilled

Highly skilled

Overhead charges

Contractor's profit

Contractor's profit & overhead charges

Labour CESS

PH ANALYSIS

Laying in trenches unplasticised PVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification compete.[Earth work in trenches to be measured and paid for separately]

PH analysis 2013 UPVC PIPES & SPECIALS item no 2.3.1 / P - 36

Data for

A.cost of material

90mm dia rigid UPVC pipe class - 3 [0.60mpa]

B.Labourfor laying

Plumber Fitter

Male worker

C.Labour for Jointing & testing

Plumber Fitter

Helper to plumber or fitter

Male worker

D.cost of Jointing materials

Solvent cement=30gms

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

90mm dia rigid UPVC pipe class - 3 [0.60mpa]

B.Labourfor laying

Plumber Fitter

Male worker

C.Labour for Jointing & testing

Plumber Fitter

Helper to plumber or fitter

Male worker

D.cost of Jointing materials

Solvent cement=40gms

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

110mm dia rigid UPVC pipe class - 3 [0.60mpa]

B.Labourfor laying

Plumber Fitter

Male worker

C.Labour for Jointing & testing

Plumber Fitter

Helper to plumber or fitter

Male worker

D.cost of Jointing materials

Solvent cement=56gms

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

125mm dia rigid UPVC pipe class - 3 [0.60mpa]

B.Labourfor laying

Plumber Fitter

Male worker

C.Labour for Jointing & testing

Plumber Fitter

Helper to plumber or fitter

Male worker

D.cost of Jointing materials

Solvent cement=71gms

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

140mm dia rigid UPVC pipe class - 3 [0.60mpa]

B.Labourfor laying

Plumber Fitter

Male worker

C.Labour for Jointing & testing

Plumber Fitter

Helper to plumber or fitter

Male worker

D.cost of Jointing materials

Solvent cement=100gms

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

160mm dia rigid UPVC pipe class - 3 [0.60mpa]

B.Labourfor laying

Plumber Fitter

Male worker

C.Labour for Jointing & testing

Plumber Fitter

Helper to plumber or fitter

Male worker

D.cost of Jointing materials

Solvent cement=133gms

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

Providing and fixing to wall or ceiling and floor rigid UPVC pipes classIV [8kgf/cm²]class III [6 kgf/cm²] conforming to IS:4985/2000 and pipe fittings of the following nominal bore with clamps including making good the wall , ceiling and floor all complete as per specification.

PH analysis 2013 WATER SUPPLY item no 3.1.3 / P - 98

Data for

A.cost of material

16mm dia UPVC pipe class IV

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber Fitter

Male worker

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

20mm dia UPVC pipe class IV

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B. labour

Plumber (Fitter )

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Material

25mm dia UPVC pipe class IV

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B. Labour for laying

Plumber Fitter

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

32mm dia UPVC pipe class IV

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber ,Fitter

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

40mm dia UPVC pipe class IV

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber (Fitter )

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

50mm dia UPVC pipe class IV

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber (Fitter )

Male mulia

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

Providing and fixing to wall or ceiling and floor rigid PVC pipes conforming to ASTM-D-1785/89[Sch-80] and pipe fittings of the following nominal bore with clamps including making good the wall , ceiling and floor all complete as per specification.

PH analysis 2013 WATER SUPPLY item no 3.1.4 / P - 100

Data for

A.cost of material

15mm dia PVC Sch-80 pipes

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber Fitter

Male worker

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

20mm dia PVC Sch-80 pipes

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B. labour

Plumber (Fitter )

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Material

25mm dia PVC Sch-80 pipes

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B. Labour for laying

Plumber Fitter

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

32mm dia PVC Sch-80 pipes

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber ,Fitter

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

SUPREME

Deduct 18% GST

A. Materials

40mm dia PVC Sch-80 pipes

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber (Fitter )

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

50mm dia PVC Sch-80 pipes

Pipe Fittings & wastage

Wooden plug , clamps cement etc

B.Labour

Plumber (Fitter )

Male mulia

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

Providing and fixing Clorinated Polyvinyl Chloride [CPVC]pipes SDR-11 conforming to IS:15778, having thermal stablity for hot & cold water supply , including all CPVC plain & brass threaded fittingincluding fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes and fittings with one stp CPVC solvent cement and testing of joints complete as per specification and direction of Enfineer-in-charge.

PH analysis 2013 WATER SUPPLY item no 3.1.5 / P - 102

Data for

A.cost of material

15mm dia CPVC pipes

Pipe Fittings & wastage

Cement sand & grit etc.

B.Labour

Plumber Fitter

Helper to plumber

Male worker

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

20mm dia CPVC pipes

Pipe Fittings & wastage

Cement sand & grit etc.

B. labour

Plumber (Fitter )

Helper to plumber

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Material

25mm dia CPVC pipes

Pipe Fittings & wastage

Cement sand & grit etc.

B. Labour for laying

Plumber Fitter

Helper to plumber

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

32mm dia CPVC pipes

Pipe Fittings & wastage

Cement sand & grit etc.

B.Labour

Plumber ,Fitter

Helper to plumber

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

40mm dia CPVC pipes

Pipe Fittings & wastage

Cement sand & grit etc.

B.Labour

Plumber (Fitter )

Helper to plumber

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

50mm dia CPVC pipes

Pipe Fittings & wastage

Cement sand & grit etc.

B.Labour

Plumber (Fitter )

Helper to plumber

Male mulia

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

Providing and fixing of 3 layer PP-R [ Poly propylene Random copolyer] pipes confirming to IS;15801,SDR 7.4, UV stabilized & anti - microbial fusion welded , having thermal stability for hot and cold water supply , including PP-R plain & brass threaded propylene Random fittings , i/c fixing the pipe with clamps at 1.00m spacing including testing of joints complete as per specification and direction of the engineer-in-charge.

PH analysis 2013 WATER SUPPLY item no 3.1.7/ P - 106

A. Materials:

16mm. OD PP-R pipe

Fittings & wastages

cement sand &grit etc.

B.Labour

Plumber fitter [S]

Helper

Male mulia

Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials:

20mm. OD PP-R pipe

Fittings & wastages

cement sand &grit etc.

B.Labour

Plumber fitter [S]

Helper

Male mulia

Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials:

25mm. OD PP-R pipe

Fittings & wastages

cement sand &grit etc.

B.Labour

Plumber fitter [S]

Helper

Male mulia

Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials:

32mm. OD PP-R pipe

Fittings & wastages

cement sand &grit etc.

B.Labour

Plumber fitter [S]

Helper

Male mulia

Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials:

40mm. OD PP-R pipe

Fittings & wastages

cement sand &grit etc.

B.Labour

Plumber fitter [S]

Helper

Male mulia

Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials:

50mm. OD PP-R pipe

Fittings & wastages

cement sand &grit etc.

B.Labour

Plumber fitter [S]

Helper

Male mulia

Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

Providing and fixing of Rational moulded polyethylene cylendrical vertical water storate tanks confirming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and proviidng extra sockets and jam nuts , fixing ball volve ete. including hoisting up to a hite of 5.00 metes above ground level and placing the tank to the required position etc. all complete as per specification and direction of the engineer-in-charge.

PH analysis 2013 WATER SUPPLY item no 3.1.8/ P - 108

Details of cost for one tank on the roof ground floor

A. Materials:

2 Layer ISI Marked

2000 liter capacity double layer cylendrical vertical water storage tanks

lead paint and yarn

B.Labour

Plumber fitter [S]

Helper

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Details of cost for one tank on the roof ground floor

A. Materials:

1000 liter capacity double layer cylendrical vertical water storage tanks

lead paint and yarn

B.Labour

Plumber fitter [S]

Helper

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Extra over item no.3.1.8 for hoisting Rational moulded polyethylene cylendrical vertical water storage tanks of following sizes for every additional height of 5.00m. Or part thereof complete as per specification and direction of the engineer-in-charge.

PH analysis 2013 WATER SUPPLY item no 3.1.9/ P - 108

Details of cost for hoisting one tank

A.Labour

Helper

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Details of cost for hoisting one tank

A.Labour

Helper

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Supplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification.

PH analysis 2013 Internal water supply item no 3.1.10 / P-109

Data for holes

a.Labour for cutting holes

Mason (2nd class )

Male worker

b.Brick work in cement mortar (1:4)[excluding CP&OHC]

Less33% for pipe etc.=0.012

c.12mm. thick cement plaster (1:4)

Add extra for labour and wastage in materials due to restricted area of b+c

Total

Add Contractor's profit &overhead charges

Rate per each hole

Labour CESS

Or Say.

cost of one hole 25cm depthmultiplied by 375 / 250 = 1.50

Or Say.

cost of one hole 25cm depthmultiplied by 500 / 250 = 2.00

Or Say.

Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including for passing GI / PVC pipes and fittings etc. and repairing the holes after insertion of pipes etc. with cement concrete 1:2:4 including finishing complete to make it leak proof leak to the damages all complete as per specification and direction of the Engineer-in-charge. [ data for 10 nos of holes ]

PH analysis 2013 Internal water supply item no 3.1.11 / P-109

a.Labour for cutting holes

Mason (2nd class )

Male worker

b.Cement concrete (1:2:4)[excluding CP&OHC]

Less33% for pipe etc.=0.011

Add extra for labour and wastage in materials due to restricted area of b

Finishing top and bottom and making the hole leak prof

Total

Add Contractor's profit &overhead charges Total [a+b]

Rate per each hole

Labour CESS

Or Say.

Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification.

PH analysis 2013 water supply item no 3.1.12 / P-110

Data for

a.Labour for cutting

Plumber fitter

Helper to Plumber

b.Labour for redoing

Mason special

Male worker

c. Materials

Cement concrete (1:3:6) with 4cm metal [excluding CP&OHC]

12mm. thick cement plaster (1:3)

Cement punning

Total

Add Contractor's profit &overhead charges Total [a+b+c]

Rate per one meter

Labour CESS

Or Say.

Supplying all materials, labour and T&P and laying in trenches, PVC pipes conforming to ASTM-D-1785/89 ,the following nominal bore and pipe fittings including testing as per specification all complete. [excluding earth work in trenches ]

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.7 / P - 121

Data for

A.cost of material

15mm. dia ASTM sch-40 pipe [considering 6m length]

Pipe Fittings & wastage

B.Labour

Plumber (Fitter )

Male worker

C.Add Contractor's profit &overhead charges Total [a+b+c]

Rate per 1Rmt.

Labour CESS

Or Say.

A.cost of material

20mm. dia ASTM sch-40 pipe [considering 6m length]

Fittings & wastages of ( med)

B. labour

Plumber (Fitter )

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Material

25mm. dia ASTM sch-40 pipe [considering 6m length]

Fittings & wastages

B. Labour for laying

Plumber Fitter [S]

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

32mm. dia ASTM sch-40 pipe [considering 6m length]

Pipe Fittings & wastages

B.Labour

Plumber ,Fitter [S]

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

40mm. dia ASTM sch-120 pipe [considering 6m length]

Pipe Fittings & wastages

B.Labour

Plumber (Fitter )

Male worker

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

A. Materials

50mm. dia ASTM sch-120 pipe [considering 6m length]

Fittings & wastages of ( med)

B.Labour

Plumber (Fitter )

Male mulia

C.Add Contractor's profit &overhead charges

Rate per 1Rmt.

Labour CESS

Or Say.

Making connection of Galvanised mild steel distribution branch with galvanised mild steel main 25mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.11 / P - 132

A. Materials

32mm. GI Tee

32mm. GI 5mm nut

B.Labour for laying

Plumber ,Fitter [S]

Male worker

C.Add Contractor's profit &overhead charges

Rate per each

Labour CESS

Or Say.

Making connection of Galvanised mild steel distribution branch with galvanised mild steel main 50mm to 80mm nominal bore by providing and fixing tee including cutting and threading the pipes complete.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.12 / P - 132

A. Materials

65mm. GI Tee

65mm. GI 5mm nut

B.Labour for laying

Plumber ,Fitter [S]

Male worker

C.Add Contractor's profit &overhead charges

Rate per each

Labour CESS

Or Say.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.14 / P - 133

Data for

A. Materials:

15mm dia CP short body bib cock

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.15 / P - 134

Data for

A. Materials:

15mm dia long body Bib cock

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Supplying all labour and T&P for fixing 2 in 1 bib cock of the following size as per specification all complete (including cost of cock )

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.15 / P - 134

Data for

A. Materials:

15mm dia 2 in 1 Bib cock

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Supplying all labour and T&P for fixing CP Angular stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete .

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.16 / P - 134

Data for

A. Materials:

15mm dia CP angular stop cock

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

20mm dia CP angular stop cock

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Supplying all labour and T&P for fixing CP Concealed stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.16 / P - 134

Data for

A. Materials:

15mm dia CP concealed stop cock

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

20mm dia CP concealed stop cock

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Supplying all labour and T&P for fixing Brass /Gunmetal full way volve confirming to IS:781-1995 of the following nominal sizes as per specification all complete.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.17/ P - 135

Data for

A. Materials:

15mm dia brass /Gun metal fullway volve

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

32mm dia brass brass /Gun metal fullway volve

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

65mm dia brass brass /Gun metal fullway volve

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

100mm dia brass brass /Gun metal fullway volve

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Supplying all labour and T&P for fixing Brass /Gunmetal full way volve [ horizontal plungr type] confirming to IS:1703-1977 of the following nominal sizes as per specification all complete.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.18/ P - 136

Data for

A. Materials:

20mm dia brass full way volve telfon brass ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

25mm dia brass full way volve telfon brass ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

50mm dia brass full way volve telfon brass ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Supplying all labour and T&P for fixing Brass /Gunmetal Ball valve [horizontal plungr type] confirming to IS:1703-1977 of the following nominal sizes as per specification all complete.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.18/ P - 136

Data for

A. Materials:

15mm dia brass ball volve telfon brass ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

32mm dia brass brass ball valve

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

40mm dia brass brass ball valve

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Supplying all labour and T&P for fixing U.P.V.C Ball valve [ horizontal plungr type] confirming to IS:1703-1977 of the following nominal sizes as per specification all complete.

PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.18/ P - 136

Data for

A. Materials:

15mm dia ball volve with ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

25mm dia ball volve with ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

50mm dia ball volve with ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

65mm dia ball volve with ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

A. Materials:

65mm dia ball volve with ball & spindle

b. Labour

Plumber Fitter(S)

helper to plumber / fitter

Jointing materials on labour

Add Contractor's profit &overhead charges

Rate per each

Providing and fixing on wall face unplasticised rigid PVC soil waste and rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion [i] Single socket pipes.

PH analysis 2013 PLUMBING SOIL WASTE,VENTILATING PIPES &FITTINGS item no 3.3.2/ P - 139

Details of cost for

A.Materials

75mm diaUPVC single socket pipe

rubber seal ring

Adhesive etc.

Scaffolding

B. Labour

Plumber fitter

Helper to plumber

Male worker

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Details of cost for

A.Materials

110mm dia PVC single socket pipe

rubber seal ring

Adhesive etc.

Scaffolding

B. Labour

Plumber fitter

Helper to plumber

Male worker

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Providing and fixing on wall face unplasticised rigid PVC moulded fittings / accessories for unplastidsied rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion.

PH analysis 2013 PLUMBING SOIL WASTE,VENTILATING PIPES &FITTINGS item no 3.3.3/ P - 140

Coupler

Details of cost for

A.Materials

75mm diaUPVC coupler for drainage pipes 75mm

rubber seal ring

Adhesive etc.

Carriage and fixing charges

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Details of cost for

A.Materials

110mm diaUPVC coupler for drainage pipes 110mm

rubber seal ring

Adhesive etc.

Carriage and fixing charges

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Single pushfit Coupler

Details of cost for

A.Materials

75mm diaUPVC coupler for drainage pipes 75mm

rubber seal ring

Adhesive etc.

Carriage and fixing charges

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Details of cost for

A.Materials

110mm diaUPVC coupler for drainage pipes 110mm

rubber seal ring

Adhesive etc.

Carriage and fixing charges

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Single tee with door

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

75mm dia UPVC equal tee with door

rubber seal ring

Adhesive Carriage of materils rubber wash etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

110mm dia UPVC equal teewith door

rubber seal ring

Adhesive Carriage of materils rubber wash etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Single tee without door

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

75mm dia UPVC equal tee without door

rubber seal ring

Adhesive Carriage of materils rubber wash etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

110mm dia UPVC equal tee without door

rubber seal ring

Adhesive Carriage of materils rubber wash etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Bend 87.5ᴼ

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

75mm dia Bend

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

110mm dia bend

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Door Bend 87.5ᴼ

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

75mm dia Bend

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

110mm dia bend

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

PVC Pipe Clip

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

75mm dia pipe clip

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

SUPREME

Deduct 18% GST

Details of cost for

A.Materials

110mm dia bend

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

PVC Vent Cowl

Details of cost for

A.Materials

110mm dia bend

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

B.Materials

110mm dia bend

rubber seal ring

Adhesive etc

Carriage of materils & fixing charges etc.

Add Contractor's profit &overhead charges

rate per one meter

Labour CESS

Or Say.

Providing cemet joints confirming to IS:3114-1994 tocand cost iron / centrifugally cast [spun] spigot and socket , soil waste ventilating pipes and fittings with spun yarn socked in cement or bitumen and cement mortar 1:1 etc. complete as per specification and direction of the Engineer-in-charge.

PH analysis 2013 PLUMBING SOIL WASTE,VENTILATING PIPES &FITTINGS item no 3.3.4/ P - 143

ii . 100mm diameter

Details of cost for

A.Materials

spun yarn

cement

Sand/ Bitumen etc.

B. Labour for cutting & alining

Plumber fitter

Helper to plumber

Male worker

curing na scaffolding 10% on labour

Add Contractor's profit &overhead charges

carrige

cement

Labour CESS

Or Say.

with out OH charges per joint

Supplying all materials, labour and T&P for cutting holes through existing brick or laterite masonry walls for taking sand cast iron [SCI] / centrifugally cast[spun] iron pipes . pipes and fittings including mending good to the damages all complete as per specification.

PH analysis 2013 PLUMBING SOIL WASTE,VENTILATING PIPES &FITTINGS item no 3.3.6/ P - 145

A.Materials

cement

KB Bricks

B. Labour

Mason (2nd class )

Male mulia

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

A.Materials

cement

KB Bricks

B. Labour

Mason (2nd class )

Male mulia

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Supplying all materials,labour and T&P for cutting holes in R.C.C. floors, roofs,or cornice including making good and leak proof to the damages for taking sand cast iron [SCI] / centrifugally cast[spun] iron pipes . pipes and fittings including mending good to the damages etc. all complete as per direction of the Engineer-in-charge.

PH analysis 2013 PLUMBING SOIL WASTE,VENTILATING PIPES &FITTINGS item no 3.3.7/ P - 145

A.Materials

cement

chips

B. Labour for cutting & alining

Plumber fitter

Mason (2nd class )

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Supplying all materials,labour and T&P for cutting holes in R.C.C. chajja including making good and leak proof to the damages for taking sand cast iron [SCI] / centrifugally cast[spun] iron pipes / PVC pipes and fittings including mending good to the damages etc. all complete as per specification and direction of the Engineer-in-charge.

PH analysis 2013 PLUMBING SOIL WASTE,VENTILATING PIPES &FITTINGS item no 3.3.8/ P - 146

A.Materials

cement

chips

B. Labour for cutting & alining

Plumber fitter

Mason (2nd class )

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Supplying all materials,labour and T&P for cutting by chiselling in brick masonry for fixing sand cast iron pipes of follwoing nominal size and fitting including making good the same with brick work in cement mortar 1:3 including plastering to the damages etc. all complete as per direction of the Engineer-in-charge.

PH analysis 2013 PLUMBING SOIL WASTE,VENTILATING PIPES &FITTINGS item no 3.3.9/ P - 146

75mm Diameter

A.Materials

KB Bricks

cement

B. Labour for cutting & alining

Mason (2nd class )

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

100mm Diameter

A.Materials

KB Bricks

cement

B. Labour for cutting & alining

Mason (2nd class )

Male worker

Add Contractor's profit &overhead charges

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing water closet ,squatting pan(Indian type.W.C.pan or Orissa pan) confirming to IS 2556 : Part-3-2004 duly embedded in cement concrete (1:4:8) using 40mm.nominal size h.b.g. chips [including foot rest for I.W.C. and trap] all complete as per specificationand directon of theEngineer - in - charge.

PH analysis 2013 Sanitary installation item no 3-4-1 / P-147

A. Materials

Cost of IWC 580mm

Cost of Trap Nahani without Jali

Cement for .12cum cc

metal

B.Labour

Plumber /Mason

Male mulia

A+B[ labour+material]

Add Contractor's profit &overhead charges

D.Carriage of materials:

Cement for .12cum cc

metal

E.Royality of materials:

metal

Labour CESS

Or Say.

Supplying all materials,labour and Supplying all materials,labour and T&P for fixing in cement mortar (1:3) a pair of white vitereous china (250x130x30mm.) foot rest for squatting water closet. etc. all complete as per specificationand direction of the Engineer-in-charge.

PH analysis 2013 Sanitary installation item no 3.4.2 / P-147

I.W.C. foot rest:-

A.Material

Cost of IWC Foot rest one pair

Cement & sand including carriage of materials

B.labour

Plumber (fitter)

contractors profit &Over head charges on A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing of 100mm size'P' or 'S' trap [ with horn or without horn]for water closet sqatting pan including jointing the trap with pan in cement mortar 1:1 etc. all complete as per specification and direction of the Engineer-in-charge.

PH analysis 2013 Sanitary installation item no 3.4.3 / P-147

S' trap

A.Material

Rate same as per item no.3.3.4 [ ii ] excluding sundries and OH charges

B.110mm dia PVC SWR 'S' trap

contractors profit &Over head charges on A+B

Labour CESS

Or Say.

P' trap

A.Material

Rate same as per item no.3.3.4 [ ii ] excluding sundries and OH charges

B.110mm dia PVC SWR 'P' trap

contractors profit &Over head charges on A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral "S" or "P" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.

PH analysis 2013 Sanitary installation item no 3.4.4/ P-148

White vtreous China wash down water closet [E.W.C.]

A.Materials

White vtreous China EWC with 'S' trap

C.P. screw,washers,plugs,white cement etc

Jointing trap with soil pipe as per item no.3.3.4 [ ii ] excluding sundries and OH charges

Carriage of materials

B.Labour

Plumber (fitter)

Male mulia

Over head charges on A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.

PH analysis 2013 Sanitary installation item no 3.4.5/ P-148

Plastic Seat & Cover

A.Materials

White Plastic seat and cover

B.Labour

Fixing charges including sundries ,T&P and carriage of T&P

Over head charges on A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing of PVC 10.00 ltr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification.

PH analysis 2013 Sanitary installation item no 3.4.6/ P-148

10 ltrs capacity low level cistern:-

A.Materials

Cost of 10lt. Low level cistern fittings and accessories

Carriage of materials

B.Labour[ considering one fitter & one belder can fix 8 cisterns per day]

Plumber (fitter)/Mason.

Man mulia

Over head charges & C.Profiton A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing Porcelain Flat Back Stall Type Magnum Urinal respectively with waste pipe by means of white lead mixed with choppedhempetc. all complete as per specification.

PH analysis 2013 Sanitary installation item no 3.4.8/ P-150

i.Vitreous china -Flat Back urinal of 380x580x350mm size

A.Materials

Cost of Flat back urinal 375x390x590mm

Urinal Spreader

Domed Waste coupling

Waste pipe 50x800mm

Carriage materials

B.Labour

Plumber (fitter)/Mason.

Male mulia

Over head charges on A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing glazed earthen-ware squatting plate of size (600 mmx350mm.) confirming to IS : 2556-part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:4:8) using 40mm. size h.b.g. chips all complete as per specification.

PH analysis 2013 Sanitary installation item no 3.4.9/ P-150

One - seated Urinal 600 x 355 mm size

A Materials

A.Vitreous china squatting plate urinal

Cement ,sand grit etc.

Carriage of materials

B.Labour

Plumber (fitter)

Mason.

Male mulia

D. oh charges etc.

Over head charges contractors profit

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.

PH analysis 2013 Sanitary installation item no 3.4.11/ P-151

Vitreoous china flat back Wash hand basin 460x350x180mm

A. Materials

Cost of Counter Top Basin Oval Shape 450X400

CI bracket for wash basin and sinks

Waste pipe 32x1150mm

Cement, sand and wooden plugs etc.

B.Labour

Plumber (fitter)

Mason.

Man mulia

Over head charges contractors profit

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing corner wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.

PH analysis 2013 Sanitary installation item no 3.4.11/ P-151

Vitreoous china corner Wash hand basin 16" x 16"

A. Materials

Cost of wash hand basin 550x400

CI bracket for wash basin and sinks

Waste pipe 32x1150mm

Cement, sand and wooden plugs etc.

B.Labour

Plumber (fitter)

Mason.

Man mulia

Over head charges contractors profit

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing Pedestal for wash hand basin complete recessed at the back for the receiptionof pipe and fittings etc. all complete as per specification including cost of pedestal for wash basin

PH analysis 2013 Sanitary installation item no 3.4.12/ P-151

Pedestal

A.Materials

Cost of Pedestal

Cement, sand and wooden plugs etc.

Carriage of materials and fixing charges

Over head charges on A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good to the walls etc. all as per specification including cost of sink with all accessories.

PH analysis 2013 Sanitary installation item no 3.4.14/ P-152

sink 24"x18"10"

A.Materials

Cost of Sink

castiron brackets[one pair]

Cement, sand and wooden plugs etc.

Painting of bracketsetc.

Carriage of materials

B.Materials

Plumber (fitter)

Mason.

Man mulia

Over head charges on A+B

Labour CESS

Or Say.

B.Materials 36"x18"10"

Cost of Sink with drain board

castiron brackets[one pair]

Cement, sand and grit etc.

Painting of brackets etc.

Carriage of materials

B.Materials

Plumber (fitter)

Mason.

Man mulia

Over head charges on A+B

Labour CESS

Or Say.

Supplying all materials,labour and T&P for fixing CP Gratings of the following nominal diameter of outlet, of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting and making good to the walls and floors etc. all complete as per specification.

PH analysis 2013 Sanitary installation

C.P Gratings IS :1729 :-

A.Materials

Cost of CP Gratings

Cement, sand and grit etc.

Carriage of materials

B.Labour

Mason.

Man mulia

Over head charges on A+B

Labour CESS

Or Say.

II.A.Floor trap Centrifugally cast [spun]iron SS as per IS :3989 :-