KGQ - Supply, Erection, Testing & Commissioning (SETC) of 11kV/433v Sub-Station and Power Supply arrangements to PH shelters, PWI store, Covered Parking area etc - Electrical Arrangements

Description:- Excavation of cable trench in all kinds of soil up to a depth of 1.0 Mtr. & Width of 0.3

and Width can be varied based on site Condition as directed by site engineers in charge. Concerned Measurement will be taken in Cubic meters. easily inserted and removed wherever need arises

Description:- Supply and laying /fixing of HDPE pipe 110mm dia pressure rating up to 4PN (Material

like T-Joints, L-Joints, shall be used at appropriate locations. So that cable can be easily inserted and removed wherever need arises

Description:- Supply and laying /fixing of HDPE pipe 50mm dia pressure rating up to 4PN (Material

like T-Joints, L-Joints, shall be used at appropriate locations. So that cable can be easily inserted and removed wherever need arises

Description:- "Supply, erection, testing and commissioning of feeder pillar bunk made in 16SWG

going a) 4Pole MCB-32A-2nos. b) DP RCCB 25A/100mA-1 no. c) DP MCB-16A-2 nos. d) Conventional analog type timer-1no, e) 20A 4Pole contactor- 1no. f) 63A 4way connector-4 nos. g) Drawing approval to be obtained before fabrication"

PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY

Sheet Medium Voltage Main Distribution Board. ( MTDB ) In comer 1) 1 Nos. of MCCB 4 Pole 160A, 36kA with thermal magnetic release, Ground fault Protection having specification similar to L&T Model No. CM92108OOM1OG. Out Going 1) 4 Nos. of MCCB 4 Pole 63A, 36kA with thermal magnetic release, Ground fault Protection having specification similar to L&T Model No. CM97919OOH2OG. 2)

copper bus bar of size 300 Sq.mm (main) and Other standard fittings, as per relevant IS. Note :- 1) All MCCB has to be fitted with Spreader & ROM "

be fixed on the wall/ceiling/PF Shelter with suitable clamps. "

efficient type of 1200 mm sweep, with 5 star rating having input power (max) 28 Watts, suitable for

controlling switch on the already erected modulr control /switch boards including internal wiring [ Socket - 2 Module, Switch 1 Module ]

switch on the already erected modulr control /switch boards including internal wiring [ Socket - 2 Module, Switch 1 Module ]

Description:- "Supply and Single phase wiring by means of 2 nos. of 1.5 Sq.mm (P&N) and 1 No. of

multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

Description:- "Supply and Single phase wiring by means of 2 nos. of 2.5 Sq.mm (P&N) and 1 No. of

multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

Description:- "Supply and Single phase wiring by means of 2 nos. of 4 Sq.mm (P&N) and 1 No. of 6

multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

frame & plate including plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

16 Description:- Supply and fixing of 3 plate ceiling rose as ditected by site engineer incharge.

17 Description:- Supply and Fixing of 1Way 6A Modular switch as directed by site engineer incharge

18 Description:- Supply and Fixing of Dummy Plates as directed by site engineer in Charge.

& Wall thickness 1.6mm+/-0.2mm for Concealed Wiring including, tees, bends, junction boxes etc.., plastering and finishing to original level. "

20 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY 20 Description:- "Supply and laying of ISI marked Medium duty PVC rigid wiring conduit pipe of size 20mm dia for Open wiring including, tees, bends, junction boxes etc and finishing to original level & Wall thickness 1.4mm +/- 0.2mm. "

Description:- "Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size up to &

site, with suitable clamps, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical/W/PGT."

Description:- "End termination using single brass compression gland of Size from 4 core 16 Sq.mm

including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge."

Description:- "End termination using single brass compression gland of Size from 4 core 70 Sq.mm

including supply and Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge."

concrete in an approved manner

clamps and sealing compound shall be provided on the top of the GI pipe as per standard. "

50mm. Note:- Existing Power cable has to be arranged in the U-PVC Trunking System as directed bysite engineer incharge."

Description:- "Supply and erection of 300 x 50mm size 14 SWG Hot dipped GI perforated tray for

ESSAR, TATA or any other reputed makes. Note:- 1) The scope of work includes supply and fixing of suitable length & size of thread rods and strut channels etc.., including all other accessories for successful completion of the above work"

Description:- "Supply and fixing of Poly carbonate box of similar to Hensel Model No. Mi 0600/0601 in the PF shelter for cable termination with the following, 1) 25x3x200mm-6Nos. of Copper Bus bar

LSH) PVC insulated single core multistranded flexible copper cable with ISI mark has to be used for connecting between Copper bus bar and MCBs. 2) Out going from MCBs has to be neatly wired and covered as directed by site engineert in charge. "

0300/0301 in the PF shelter for cable termination with 1 No. of 200A 4 Way Connector. Note :- For 24 Hrs supply, Stall supply etc.., tapping points. "

in the PF shelter for cable termination with 1 No. of 64A 4 Way Connector. Note :- For Inverter/Emergency supply tapping points etc."

approved manner. "

PF shelter. 8mm Steel rod has to be used for provision of ""S"" Hooks. Same has to be fixed in the said MS flat. Note:- 2 cots of Aluminium painting has to be done on the MS Flat."

35 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY

25mm dia for Open wiring including, tees, bends, junction boxes etc and finishing to original level & Wall thickness 1.4mm +/- 0.2mm "

sheets on the top and fitted with 1 No. of three plate ceiling rose, 6A Flush type KITKAT fuse unit. The box will be fixed by the suitable size of GI clamps

Description:- "Supply, Fabrication and fixing of supporting arrangments for fixing of LED tube light

red oxide and two coats aluminium paint as directed at site. Note:- MS angle to be welded in the PF Shelter as directed by site engineer incharge"

Description:- "Supply, installation, testing and commissioning of Aesthetically designed Mobile Phone Charging Points with plug sockets and control accessories complete as per specification enclosed. Including Single phase wiring by means of 2 nos. of 1.5 Sq.mm (P&N) and 1 No. of

multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through PVC Casing and capping or pipes, junction boxes, distribution boards etc.,from OH aerial mains. Note:- Number of Sockets Required - 6Nos. of 3pin 6A Sockets with suitable controlling switches."

for PF light control with the followings, 1)1 No.of On Delay timer Similat to (L&T) Model No.GIC 12ODT4 with 1No. of contactor."

Description:- "Provision of Inspection pit of 0.6m x 0.6 m x 0.6 m depth (Inner dimensions) for

be of Concrete slab/ heavy duty FRP/ cast iron as directed by site Engineer in charge. Note :- 1) Edges of the Top cover and top of the Inspection pit shall be protected by Suitable MS / GI ""L Angle"" as directed by site Engineer in charge."

stacking to the proper location as directed by site engineer in charge.

Description:- "Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size above70

as directed at site, with suitable clamps and termination duly supplying required Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical/W/PGT. "

Description:- "Transportation &Laying / clamping / threading of 2Core/4 Core XLPE cable (Size

Wall/shelters, FOB, etc as directed at site, with suitable clamps and termination duly supplying required cable glands, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical/W/PGT."

Description:- Supply,Transportation &Laying/ clamping /threading of HT XLPE cable 3x300 Sq mm Aluminium including stacking place to work site and laying it carefully using cable rollers, taking

identification tags at 5m intervals, filling the space around the cable with riddled soil, providing cable route markers at 100m intervals, inclusive of cost of all materials (other than cost of GI/HDPE pipe & UG Cable), labour, transport and crane charges.

Description:- "End termination using single brass compression gland of Size from 4 core 120

of work including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge."

Description:- "End termination using single brass compression gland of Size from 4 core 240 Sq.mm up to & Including 4 Core 300 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply ad Fixing of said glands 2) PVC type glands may be used for cable

PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY

suitable clamps and sealing compound shall be provided on the top of the GI pipe as per standard

including one number of clamp made out of MS flat of 40mmx6mm size, one per metre length including applying of end sealing compound on top etc

Grade-PE 80) Under Railway track/Road Crossing/ in the excavated cable trench with suitable fixing hardware.

Description:- Excavation and refilling of cable trench along/across Tarred Road up to a depth of 1.0

finishing back to the original level with bituminous macadam using crushed stone aggregates as per standards. Depth and width can be relaxed by site Engineer and Measurement will be recorded based on the Proportionate reduction in length of trench/meter.

Description:- Excavation and refilling of cable trench across the Railway track 30cm width and

contamination of soil and rearranging the formation to original level. Depth can be relaxed by the site engineer as per the site condition and measurement will be recorded based on the volume of the trench under the formation.

Description:- Excavation of Cable trench in Granite/Paved block/Kota stone area duly removing Granite/Paved block/Kota stone and Excavation of cable trench in all kinds of soil upto a depth of 1.0

up to normal level. Depth and Width can be varied based on site Condition as directed by site engineers in charge. This includes Restoring the floor by using removed Granite/Paved block/Kota stone.

Description:- "Supply at site & placing of flat type cable route indicator at regular intervals on

The said cable Route Indicator has to be grouted in a concrete mix of ratio 1:3:6with 300mmX200mmX300mm size."

Rail poles will be supplied by Railway at nearest location same has to be cut in to suitable size as directed by site engineer."

the Dwarf Rail poles for cable termination with the following 1) 2 No. of 200A 4 Way Connector. "

Core / 3.5 Core PVC/XLPE LTUG cables of size 50sq.mm to 95sq.mm

core/3.5Core PVC/XLPE LTUG cables of size 120sq.mm to 185sq.mm

Description:- "Supply, Erection, Testing and Commissioning of 9m Double Pole (Rail pole) structure inclusive of 11kV, 200A/400A D/B GOS, Post Insulator, Pin Insulator, Disc Insulator, 1set of Lightning

cross bracings etc,,. confirming to KSEBL Standards inclusive of all accessories such as clamps, bolts, nuts, washers etc.., as per Detailed Sketch Enclosed and painting with two coats in each of primer zinc chromate and aluminium paints. (Rail pole will be supply by railway at nearest depot) Note:- Necessary drawing approval may be obtained before commencement of work. "

engineer incharge.

PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY Description:- Supply, Erection, Testing and Commissioning of Outdoor Type 11kV, 3 Phase

all other Standard accessories as per enclosed detailed specification, relevant standards and requirements of KSEB

kiosks and as instructed by Engineer-incharge with 1:2:4 ratio using 20 mm blue metal

for 11kV, 3 core, 300sq.mm XLPE UG cable

for 11kV, 3 core, 300sq.mm XLPE UG cable

Description:- Supply, Erection, testing and commissioning of Drop Out Fuse unit complete to work

fuse elements of appropriate current rating inclusive of all accessories, all conforming to IS No: 2692, 5792 & IS No: 9385 with all accessories

yardto avoid growth of grass/Bushes.

and transformer plinth structure as per standard 1542154.0

type Distribution Transformer with cable box on both HT & LT side as per enclosed detailed specification and relevant standards 2053365.0

with VCB as incomer and two nos. of VCB as outgoing as per enclosed detailed specification and relevant standards

chequered MS plate to cover cable duct to suit site requirements and as instructed by Engineer-in- charge

required for covering cable duct as instructed by the Engineer-in-charge. Floor and MS plate should be in the same level

as per standard

Automatic Power factor Correction Panel of 75kVAr capacity as per enclosed detailed specification and relevant standards

summation CT in the existing Non essential MV panel (for APFC panel) '

between APFC Panel and CT .

PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY

and commissioning of G.I. Earth Electrode 50mm dia, 3000mm long, 'C' class (heavy duty/ISI marked supply and and fixing of earth inspection chamber, lid, as per Construction Drg. No.EL/P/TYPE-1022 with charcol & salt / Bentonite Compound Filling, which includes the cutting and removing of granite / marble / kadappa stone paved platform and cement concreted areas etc., excavation / augering of earth pit by suitable boring equipments. The earth pot shall be provided in level with flooring. The above includes reconstruction of the area of granite / marble / kadappa stone / cement concrete etc.., to bring back to the original condition duly providing granite / marble / kadappa stone / cement concrete etc.., duly making interconnection between electrical equipment and earth electrode using 6SWG GI earth wire. The earth pot shall be painted black and earth value to be recorded"

Description:- "Supply and fabrication of fencing panel of 2.4mtr Height and 1m Width made with 8SWG (Nominal Size ) GI Chain Link Mesh 50X50mm inner size of the diamond design, 40X40X5/6mm MS angle Outer frame in 2mtr wide and Vertical T section support with

40X5/6mm MS flat etc.., In welded Construction, Install the Fencing panels on the channel poles already erected by welding,Suitable door and locking Arrangements , painted with approved enamelShade/AL paint after Applying epoxy Primer etc., as Required. Note:- Fencing to be done as per the drawing enclosed."

100X50mm with MS base plate of size 200X200X5mm, painted with approved enemal Shade/AL pain after epoxy primer for welded mesh fencing of the substation including concreting.

Six Numbers of fire buckets each of 10litre capacity, filled with Coares, River sand and painted in red with white letters. Note :- Drawing approval may be obtained before fabrication work."

complete with discharge swivel bend , horn & hose, screwed valve, mounting bracket and cylinderfully charged.

81 Description:- Supply of earth discharge rod with suitable length of flexible copper wire for earthing

82 Description:- Supply of fuse link rod of suitable length for fixing and removing of DO fuses

ambulance Brigade of indian re cross society Confirming to IS:-2217-1963

84 Description:- Artificial Resuscitator in a portable case ready for use with adult face piece

85 Description:- Shock treatment chart duly framed and written in englih, Hindi & Regional language.

86 Description:- Supply of 15kV grade rubber hand gloves pair of 15" size as per IS :4770-1991.

IS.No: 2551, along with one number of clamp made out of 25mm X 4 mm size including bolts & nuts for fixing on structures and painting

Description:- Supply, erection and testing of earthing arrangements duly stencilling of earth

earth treatment

RDSO/SPN/197/2008 or latest

Description:- "HT Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including

watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Note :- 1) The work has to be done as per the drawing enclosed. 2) Drawing Approval may be obtained before Commerncent of work. "

91 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY 91 Description:- Supply, fixing and laying of 6SWG copper wire for earthing purpose on structures/ground as instructed by the Engineer-in-charge

relevant standard and as instructed by the Engineer-in-charge

and 12 mm thick to withstand 40 kV(rms) as per IS No: 5424

No.EERE/TSS/16-Enamel type

including fixing clamps, bolts and nuts and painting with two coats of primer zinc chromate paint and aluminium paints

including fixing clamps, bolts and nuts and painting with two coats of primer zinc chromate paint and aluminium paints. 1662788.0

0 Description:- "Design, fabrication, supply, erection, testing and commissioning of medium voltage main distribution board (Non Essential) with the followings Incoming 1) 2 Nos of 630A, 50kA ACB motorised with Electrically Draw-out Type, Microprocessor Based SR18G (Similar to L&T Model No. SL96071) with mechanical inter lock. Outgoing 1) 1 Nos. of MCCB 4 Pole 400A, 36kA similar to L&T Model No. L&T Model No. CM93003OOOOX1 with Microprocessor Based, adjustable over load, adjustable Short circuit 2) 4 Nos. of MCCB 4 Pole 250A, 36kA similar to L&T Model No.

of MCCB 4 Pole 100A, 25kA similar to L&T Model No. CM91712OOKOOG with Thermal Magnetic Release, adjustable over load, adjustable Short circuit 4) 3 phase KWH meters (L&T model WL400010OOOO or similar) -2 Nos., 5) 3 phase Digital Voltmeters (L&T model WL132010OOOO or similar) - 2 Nos., 6) 3 phase Digital Ammeters (L&T model WL131010OOOO or similar)- 2Nos., 7) Earth Faut Relay (similar to L&T Model MC12) -2Nos., 8) Suitable length of electrolytic copper busbar of 60mm x 10mm (main) and other standard fittings as per enclosed detailed specifications and relevant IS Note:- 1) Approximate size of the panel - 3000mm x 2000mm x 1000 (L x H x D) 2) Panel depth of 1000mm may be provided for ACB side 3) All MCCB has to be fixed with Ground fault protection arrangements, Spreader & ROM"

Description:- "Design, fabrication, supply, erection, testing and commissioning of medium voltage main distribution board (Essential) with the following Incoming : 1) 1 No. of 4 pole 315A on load change over switch similar to L&T Model No. CO33150OOOO. 2) 2Nos. of MCCB 4 Pole 400A, 36kA similar to L&T Model No. CM98403OOROOG with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit. Mechanical interlocking has to be provied between the said MCCB Outgoing 1) 3Nos. of MCCB 4 Pole 160A, 25kA similar to L&T Model No. CM90642OOMO with Thermal Magnetic

L&T Model No. CM91712OOKOOG with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit. 3) 4Nos. of MCCB 4 Pole 63A, 25kA similar to L&T Model No. CM91712OOHOOG with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit 4) 3 phase KWH meters (L&T model WL400010OOOO or similar) -2 Nos., 5) 3 phase Digital Voltmeters (L&T model WL132010OOOO or similar) - 2 Nos., 6) 3 phase Digital Ammeters (L&T model WL131010OOOO or similar)- 2Nos., 7) Suitable length of electrolytic copper busbar of 40 x10mm (main) and other standard fittings conforming to enclosed detailed specifications and relevant IS,Note:- 8) Approximate size of the panel - 2600mm x 2000mm x 500mm (L x H x D)"

100 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY 100 Description:- "Design, fabrication, supply, erection, testing and commissioning of medium voltage main distribution board with the following Incoming : 1) 1Nos. of MCCB 4 Pole 250A, 36kA similar to L&T Model No. CM92109OOP1OG with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit. Outgoing 1) 3Nos. of MCCB 4 Pole 100A, 25kA similar to L&T Model No. CM91712OOKOOG with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit 2) 3Nos. of MCCB 4 Pole 63A, 25kA similar to L&T Model No. CM91712OOHOOG with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit. 3) Multifunction meter similar to L&T model WL440521OOOO - 1 Nos., 4) Suitable length of electrolytic copper busbar of 40 x10mm (main) 5) Indication lamp for 3 phase - 1 set 6) Approximate size of the panel - 1600mm x 1500mm x 500mm (L x H x D) and other standard fittings conforming to enclosed detailed specifications and relevant IS, "

an approved manner

cable trenches, fencing Kerb wall.

wall, brick foundation etc..,

trench and instructed by Engineer in charge with 1:3:6 ratio using 20mm blue metal

inforcement 100mm C/C metal etc.., for covering the open cable duct out side.

25x3mm size including painting suitable for clamping/fixing of GI pipe/LTUG cable on walls of buildings/sheds, shelter etc. using bolts and nuts of suitable sizes

Description:- "Supply and erection of 300 x 50mm size 14 SWG GI perforated tray for cable laying

TATA or any other reputed madek Note:- 1) The scope of work includes supply and fixing of suitable length & size of thread rods and strut channels etc..,"

Description:- "Supply and Three phase wiring by means of 4 nos. of 10.0 Sq.mm (P&N) and 1No. of

multistranded flexible copper cable with ISI mark of approved make with coded color for Three Phases, Neutral and Earth Respectively through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

Description:- Supply and wiring to pre-Cooling Plug socket by means of 4 Runs of Flame Retardant

50mm dia PVC pipe including clamping of PVC pipe along the rail post/PF Shelter/Pillar with suitable MS painted fixing hardware (1m = 4 Runs of 25 Sq.mm copper wire)

Description:- "Design, fabrication, supply, erection, testing and commissioning of 14 SWG, Outdoor, Double door type medium voltage main distribution board (Non Essential & Essential) with the followings Incoming 1) 1 Nos. of MCCB 4 Pole 250A, 36kA similar to L&T Model No. CM92109OOP1OG with Thermal Magnetic Release, adjustable over load, adjustable Short circuit. Outgoing 1) 3Nos. of MCCB 4 Pole 100A, 36kA similar to L&T Model No. DZ1F0100DXD1A with Thermal Magnetic Release, adjustable over load, adjustable Short circuit 2) 2Nos. of MCCB 4 Pole

over load, adjustable Short circuit 4) 3 phase KWH meters (L&T model WL400010OOOO or similar) -2 Nos., 5) 3 phase Digital Voltmeters (L&T model WL132010OOOO or similar) - 2 Nos., 6) 3 phase Digital Ammeters (L&T model WL131010OOOO or similar)- 2Nos., 7) Earth Faut Relay (similar to L&T Model MC12) -6Nos., 8) Suitable length of electrolytic copper busbar of 50mm x 6mm (main) and other standard fittings as per relevant IS Note:- 1) Approximate size of the panel - 1500mm x 1500mm x 350mm (L x H x D) 2) All MCCB has to be fixed with Ground fault protection arrangements, Spreader & ROM"

112 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY

model No.Mi 0100/Mi 0101 fitted with the followings 1) 63A 4 Way connector - 1Nos. "

Description:- "Supply at site, erection, testing and commissioning of wall mounting metallic, 1- phase, double door, MCB Distribution Board 12way Similar to L&T Model No. DBSPN012DDS, powder coated with the supply and fixing of the following, In Coming DP MCB - 40Amps - 1Nos. DP ELCB-

wiring connection, with earthing / neutral link, din channel complete with all accessories. Copper lugs shall be used for termination of wire in MCB'S and Aluminium sockets for cables termination and plastering and finishing to original level as directed by Engineer In charge. Note :- 1) Makes of MCB / ELCB is L&T / Legrand / ABB / Siemens."

switch to street light fittings

with clamps including construction of hole on the wall as directed by site Engineer.

Poles/Wall of the building with suitable GI pipe and clamps if necessary. GI pipe has to be bend as directed at site including wiring arrangements/Point wiring to the fittings. "

frame & plate including plastering and finishing to original level. Preferable makes:- Legrand, ABB, L&T, C&S, Crabtree or any other reputed makes."

& Wall thickness 1.6mm+/-0.2mm for Concealed Wiring including, tees, bends, junction boxes etc.., plastering and finishing to original level. "

Description:- Supply and wiring to light/fan points by means of by means of 2 nos. of 1.5 Sq.mm (P&N) and 1 No. of 2.5Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC

color for Phase, Neutral & Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., and including supply and fixing of modular type 1way controlling switches 6A on the already erected boards/boxes including supply and fixing of PVC round block, PVC angle holder/Ceiling rose

Description:- "Supply, erection, testing and commissioning of Octagonal poles of 4 m high with

casting of cement concrete foundation & muffing Including Supply,fixing of 40W to 50W LED Street light and wiring to the LED Fittings. Note :-Drawing to be submitted for approval before fabrication of Octagonal poles."

Description:- "Supply, erection, testing and commissioning of Octagonal poles of 4 m high (without

concrete foundation & muffing Including wiring to the LED Fittings. Note :-Drawing to be submitted for approval before fabrication of 4m Octagonal poles."

(Two Way Cross Arm Complete) with Suitable Fixing Arrangements. Note :- Said C channel (Two way Coss Arm) has be fixed on the Octagonal poles as directed by site Engineer in charge. "

rail poles / 2 way cross arms of Octogonal poles.

model No. KG 9003/KG 9003 IN fitted with the followings 1) 100A 4 Way connector - 1Nos."

to street light fittings

126 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY 126 Description:- Steel work in build up tubular trusses including cutting hoisting, fixing, fixing in position and appling priming coat approved steel primer, and two coats of enamel paint, welded and bolted including special shaped washers etc. Complete Hot finished welded type tubes