Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-Finance | ₹2.4 L | L1 | Accepted-Finance L1 |
| 2 | L2₹2.7 LRejected-Finance | ₹2.7 L | L2 | Rejected-Finance L2 |
| 3 | L3₹2.9 LRejected-Finance | ₹2.9 L | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Sandeep Jamwal L1 | SAHIB SINGH L3 | Anil Kumar Guleria L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/ hard rock, chiselling/ wedging out of rock (where blasting prohibited) saturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposting of all surplus excavated earth as directed within all leads and lifts including uprooting of trees dressing of beds and sides and preparation of sub-grade, restoration of unmetalled/ metalled/ paved surfaces to its original condition including soring, strutting, timbering and dewatering where ever houses, fixing caution boards, crossing over trenches and to the entire satisfaction of the complete in all respect as per direction of Engineer in Charge with in all Leads & Lifts. | 202.5 | cum | 410 ₹83,025 Lowest | 450 ₹91,125 | 430 ₹87,075 |
| 2.00Laying, Jointing & Testing in trenches Galvanised mild steel tubes medium class of following diameter including tube fitting (Earth work to be measured and paid separately) including testing of joints within complete in all respect as per direction of Engineer in Charge with in all Leads & Lifts. (Labour Rate) | ||||||
| 2.10 | 50 mm dia | 1,500 | Rmt | 60 ₹90,000 Lowest | 80 ₹1,20,000 | 75 ₹1,12,500 |
| 3.00Providing MS flanges (in pair) for the joints of GI pipes mentioned as below and same shall confirm to BIS 6392-1971 (latest with upto date amendment) including the cost of nuts and bolts of required sizes, 3mm thick compressed asbestos fiber/ synthetic rubber gasket confirming to relevant BIS standards and it shall also include carriage of materials complete in all respect as per direction of Engineer in Charge with in all Leads & Lifts. | ||||||
| 3.10 | 80 mm dia | 4 | Pair | 910 ₹3,640 Lowest | 1,150 ₹4,600 | 1,100 ₹4,400 |
| 4.00Providing and Fixing of cast iron sluice valve (with hand wheel )confirming to BIS 780-1984 (Latest with upto date ammendments) class PN-1.00 of 10.20 kg /cm2 sheet pressure of kartar/ Bir make of dia i/c brass spindle as per IS 2906 class -11 complete (The cost of flanges to be measured and paid for separately) complete in all respect as per direction of Engineer Charge with in all leads and lifts. | ||||||
| 4.10 | 50 mm dia | 1 | Nos. | 11,000 ₹11,000 Lowest | 13,000 ₹13,000 | 12,000 ₹12,000 |
| 4.20 | 80 mm dia | 2 | Nos. | 14,900 ₹29,800 Lowest | 17,000 ₹34,000 | 16,000 ₹32,000 |
| 5.00 | Making connection (80mm & 50mm) from Main/ branch line including Cutting/ threading all necessary fitting i.e. tee, nipple, union etc as per site requirment complete in all respect as per direction and to the entire satisfaction of Engineer in charge (Non schedule item) | 4 | Job | 4,500 ₹18,000 Lowest | 6,000 ₹24,000 | 5,500 ₹22,000 |
Tender Value
₹1.8 L
EMD Value
₹3,564
Closing Date
10 Feb 2026, 10:30 amClosed
EE Jal Shakti Division Thural
EE Jal Shakti Division Thural
AR and MO to WSS Menjha upper and lower Kaliarkar in Tehsil Palampur Distt. Kangra (HP) (SH Laying, Jointing and testing of GI pipe 50mm dia SS at from village upper Bindraban to GWSR at Village Kulharkar)
2026_HPIPH_127223_1
EE/JSD/THL/2025-26-12894-12930 Dt.31.01.2026
Open Tender
Pipe Laying Works
Item Rate
90 days
EE Jal Shakti Division Thural
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
EE Jal Shakti Division Thural
₹3,564
3 Jul 2026
2 Feb 2026
10 Feb 2026
2 Feb 2026
10 Feb 2026
2 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/ hard rock, chiselling/ wedging out of rock (where blasting prohibited) saturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposting of all surplus excavated earth as directed within all leads and lifts including uprooting of trees dressing of beds and sides and preparation of sub-grade, restoration of unmetalled/ metalled/ paved surfaces to its original condition including soring, strutting, timbering and dewatering where ever houses, fixing caution boards, crossing over trenches and to the entire satisfaction of the complete in all respect as per direction of Engineer in Charge with in all Leads & Lifts. | 202.5 | cum | - | - |
| 2Laying, Jointing & Testing in trenches Galvanised mild steel tubes medium class of following diameter including tube fitting (Earth work to be measured and paid separately) including testing of joints within complete in all respect as per direction of Engineer in Charge with in all Leads & Lifts. (Labour Rate) | |||||
| 2.1 | 50 mm dia | 1,500 | Rmt | - | - |
| 3Providing MS flanges (in pair) for the joints of GI pipes mentioned as below and same shall confirm to BIS 6392-1971 (latest with upto date amendment) including the cost of nuts and bolts of required sizes, 3mm thick compressed asbestos fiber/ synthetic rubber gasket confirming to relevant BIS standards and it shall also include carriage of materials complete in all respect as per direction of Engineer in Charge with in all Leads & Lifts. | |||||
| 3.1 | 80 mm dia | 4 | Pair | - | - |
| 4Providing and Fixing of cast iron sluice valve (with hand wheel )confirming to BIS 780-1984 (Latest with upto date ammendments) class PN-1.00 of 10.20 kg /cm2 sheet pressure of kartar/ Bir make of dia i/c brass spindle as per IS 2906 class -11 complete (The cost of flanges to be measured and paid for separately) complete in all respect as per direction of Engineer Charge with in all leads and lifts. | |||||
| 4.1 | 50 mm dia | 1 | Nos. | - | - |
| 4.2 | 80 mm dia | 2 | Nos. | - | - |
| 5 | Making connection (80mm & 50mm) from Main/ branch line including Cutting/ threading all necessary fitting i.e. tee, nipple, union etc as per site requirment complete in all respect as per direction and to the entire satisfaction of Engineer in charge (Non schedule item) | 4 | Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.33 MB
Form6.pdf
Tender Documents • 0.43 MB
Form8.pdf
Tender Documents • 1.22 MB
BOQ_187836.xls
BOQ • 0.28 MB
Termsandconditions.pdf
Additional Documents • 0.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].