COMPREHENSIVE REPAIRS TO VARIOUS BUILDING OF MH AMBALA UNDER GE (SOUTH) AMBALA CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries out side defence area Complete all as specified and directed by Engineer-in-Charge.

Material and labour for premium quality vitrified ceramic tiles 9 to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 1 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) Complete all as specified and directed by Engineer-in-Charge.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) Complete all as specified and directed by Engineer-in-Charge.

Material and labour for coloured glazed ceramic tiles (600 x300x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20 to 25mm thick black granite stone of any type with table rubbed, polished & moulding, as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in with white cement (1:2) using marble with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding to edges of stone slabs one edge etc Complete all as specified and directed by Engineer-in-Charge.

Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of complete all as specified & directed.

Material and labour for machine cut kota stone slab 20-25 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) Complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine cut kota stone slab 18-20 mm thick ( size of each stone in single piece, laid on vertical surfaces of skirting/dado, over and including cement screed bed 15 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) Complete all as specified and directed by Engineer-in-Charge.

Material and labour for mirror polishing on existing kota stone/ marble stone work where ever required to give high gloss finish including repair/ replacement of broken kota stone/marble stone complete all as specified and diected by Engineer-in-Charge.

Supply and fixing of heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed Complete all as specified and directed by Engineer-in-Charge. (Note: Design/pattern shall be as approved by GE before execution of work)

Material and labour for 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors complete all as specified and directed

Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed

Material and labour for 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

Material and labour for PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in coping, kerbs, benching and bed block etc Complete all as specified and directed by Engineer-in-Charge.

Materila and labour for machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 100 mm thickness M-50 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion.Complete all as specified and directed.

Material and labour Sand filling under interlocking paver block including watering and consolidation Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 10 mm thick laminated/coloured PVC fluted wall panelling of width 250/300 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith WPC 'U' and 'L' beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 8 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of UV Marble Sheet(Digital) of size 1220x2440x2.5/3mm made from (PVC+Calcium+Adhesive) material with self adhesive material, weight-(12-14)kg/sheet, surface Pattern(Marble,Wood grain, Solid colour) Manufacture by an ISO:9001-2015 certified company. The UV marble Sheet should be 100% water-resistant, fungus-resistant, corrosion-resistant, termite-resistant & non-flammable. Complete all as specified and as directed by Engr-in-charge. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of matel false ceiling at all heights of perforated with fleece 595 mm x 595 mm x 0.5 mm TEGULAR EDGE TILES in global white powder quoted with 60-70 micron front coating and including regular 24 mm wide T-section flange colour white having rotary stitching on the main runner with web height 26 mm, exposed grid system including frame work comprises of main runner spaced at 1200 mm max (centre to centre), hangers with GI wire to be fixed by hiliti consisting of HLS sleeve anchor fastencer of thread size 6.5 mm x 25/5 with soffit cleat made of galvinised steel of size 27 mm x 37mm x 25mm x 1.6mm and level clip in dimensions of 85mmx30mm 0.8mm at 600x1200 intervals. The last hanger at the end of each main runner shoud not be greater than 450 mm from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stiching) to be interlocked between main runner at 600 mm shall be 'T'shape section with single rotary stitching made of GS sheet and of size 15 mmx32mm and 3000mm long, crosssed runner shall be 'T' shaped with double rotary stiching made of GS sheet and size 15 mmx 32mm x 1200 mm long and perimeter wall angle shall be made from GS sheet and of size 19mm x 19mm and 3000mm long, colour white, centre to form 600 mm x 600 mm modules, cut cross tees longer than 600 mm to be supported independently, 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), complete including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description Complete all as specified and directed by Engineer-in-Charge. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, urinal spreader of PTMT any colour, including providing & fixing plugs bedding urinal against wall in cement mortor 1:2 securing urinal to plug with and including 60 mm long brass screws etc pointing around urinal back in cement Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of vitreous china, white coloured, counter top wash hand basin of size 600 mm x 400 mm x 120 mm, oval type, including cutting for and pinning in, but excluding waste pipe Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of PVC waste pipe 32/40mm dia flexible PVC hose pipe of standard length/size suitbable for wash basin, urinal, kitchen sink etc complete all as specified and as directed.

Supply and fixing in repair for 15mm fancy type WHB mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd & directed.

Supply and fixing in repair of vitreous china squatting pan of Orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of single piece suite floor mounted coupled WC, bowl for coupled WC with US soft close slim seat cover, hinges, cistern fixed accessories and accessories set, size 695 x 385 x 770mm, P trap size 180mm etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of 10 litres PVC valve less, symphonic action type low level flushing cistern , white/coloured, with inlet ball valve, float and handle including flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern and brackets Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing (in repair) PVC connections 450mm long and 15mm dia PTMT with PVC washers on both ends, Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of fancy type chromium plated wall mixer (Hot & old), cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe 15 mm, Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of chromium plated shower roses 125 size with or without swivel joints, any size, including fixing to steel pipe or union Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, Complete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repair of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, Complete all as specified and directed by Engineer-in-Charge. (NOTE: - Weight of bib tap shall not be less than 0.575 Kg)

Supply and fixing in repair of fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of CP Hand shower (Health faucet) including 1.50 meter long flexible tube with wall hook Complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removal to store yard etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of GI tubing, 15mm bore, `medium grade, with all fittings and fixed to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, Complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removal to store yard etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of GI tubing, 20mm bore, `medium grade, with all fittings and fixed to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, Complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up 100/75 mm (PVC (SWR) pipe, salt glazed ware, AC or reinforced concrete) pipes, set in cement mortar from walls and taking out of trenches, if required, Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors etc Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of 110mm bore PVC (SWR) bends any radius including jointing with solvent cement Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of 75mm bore PVC (SWR) bends any radius including jointing with solvent cement Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of PVC (SWR) junction single, (Single T) 110mm bore equal or unequal fitted with access door Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of 75 mm bore PVC (SWR) vent cowl Complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness Complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge.

Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I Complete all as specified and directed by Engineer-in-Charge. Note:-(i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.

Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick as per manufacturer's instruction Complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls Complete all as specified and directed by Engineer-in-Charge.

Material and labour for three coats of white wash including preparation of new surfaces of ceiling Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site Complete all as specified and directed by Engineer-in-Charge. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing of Stainless steel 304 pillar corner/pillar guard size 50mmX50mm and 1m height Complete all as specified and directed by Engineer-in-Charge.

Material and labour for Plain Cement concrete 1:2:4 type B-1 (using 20mm mechanically graded crushed stone aggregate) as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.

Supply for liquid water proofing compound for external surfaces 200ml for 50 Kg bag of cement Complete all as specified and directed by Engineer-in-Charge.

Material and labour APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.6 Kg/Sqm black finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or butan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface Complete all as specified and directed by Engineer-in-Charge. Note :-i) The water proofing treatment shall be got carried out by the manufactarer or their authorised applictor's duly approved by GE in writing.

Supply and fixing of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters with chowkhats, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, 4mm thick figured glass, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) etc complete including taking down of existing frame with shutter Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of powder coated aluminum frame (minimum thickness of powder coating 50 micron) as in frame of door/ window / partitions , etc with one or more rebates including hinges, handles, jointing cleat for fixing etc. Complete all as specified and directed by Engineer-in-Charge. NOTE : - Only aluminium section measured and paid under this item. (ii) Rate quoted by the contractor shall demmed to inclusive for necessary fittings and fixture such as roller, handle locks etc. (iii) Glass, XPM wire mesh shall be measured and paid separately

Supply and fixing of powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos, hinges type B-21 100mm long (3Nos), anodised aluminum snap beading, screws etc in each door complete all as specified and directed by Engineer-in-Charge.

Material and labour of 19/20mm thick Pre-laminated particle board interior grade both side laminated including dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of powder coated anodised aluminium grill made of mesh size 100x100mm of bar 8mm dia using U channel 25x12mm fixed to aluminium frame work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of rubber Neoprene/ EPDM rubber gasket for aluminium door & windows Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of sheet glass 3mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane pane and glazing with oil putty to steel window or with wooden beads to wooden windows, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple ccomplete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repair of 75 mm long mortice lock with two levers (vertical type), mild brass body in aluminium door Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 5.0 mm thick tinted glass in square exceeding 0.5 sqm in each pane with heat reflecting properties, black glass file of 50 micron, fixed to aluminium frame with glazing clips, etc., Complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish Complete all as specified and directed by Engineer-in-Charge. (NOTE : - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish Complete all as specified and directed by Engineer-in-Charge. (NOTE : - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Supply and fixing of providing solid WPC door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed . The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity.complete all as specified and directed by Engr-in-charge.

Supply and fixing of 30 mm thick moulded WPC factory made 100% solid door (confirming as per IS : 4020) made from 100% lead free single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kh/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be water proof,termite rpoof,fire retardent and having screw holding capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing mild steel butt hinge of 100mm length, cold rolled, medium weight, Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150 mm long aluminium handles, cast type anodised complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 300mm long aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium partition wall, 60micron powder coated sections, (minimum thickness of powder coating shall be 50microns) fabricated, size of members 100x44x1.6mm, including making provision for opening, etc. and all necessary cleats, panel inserts not more than 1.44sqm and arrangement to receive and including 5.5mm thick glass and 19mm thick pre-laminated particle board with aluminium beading, glazing cleats, and stainless steel screws, rubber gaskets, beading, etc. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed by Engr–in–Charge.

Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed by Engr–in–Charge.

Supply and fixing magnet catcher of 25mm length, at in cabinet shelves complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair continuous (Piano) hinges mild steel, bright finish or electro galvanised, width of flap 40mm completed as specified and directed.

NOTE:- Amount of credit of Rs. 1,03,445.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s R.K.Jain (BID ID -3512157)

Swami Enterprises (BID ID -3518216)

JS CONSTRUCTION COMPANY (BID ID -3520073)

Puneet Sharma (BID ID -3513857)