Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.8 LAccepted-Finance | L1 | Accepted-Finance L1 after negotiation | |
| 2 | L2₹50.0 L+₹7.2 L (16.9%)Rejected-Finance TELIWALA PADLI GUJJAR MILAP NAGAR ROORKEE 247667 | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-Finance L2 |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
26 Jul 2022, 3:00 pmClosed
Institute Engineer
IWD IIT Roorkee.
Provision of self supported arch shaped trussless proflex or equivalent roofing at DG Govindpuri Substation, IIT Roorkee
2022_IITR_698382_1
IWD/IE/E-Tender/133
Open Tender
Civil Works
Item Rate
180 days
Roorkee
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
Yes
Registrar
₹83,000
Yes
19 Sept 2022
4 Jul 2022
27 Jul 2022
4 Jul 2022
26 Jul 2022
14 Jul 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavate dearth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size
Centering and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for mass concrete
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
12 mm cement plaster finished with a floating coat of neat cement of mix :
1:4 (1 cement: 4 fine sand)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Provinding and fixing of self supported arech shaped mechanically seemed trussless pre coated Galvalume proflex or equivalent Roofing as per below mentioned specification &as per instructions of EIC. Color Coated Galvalume steel (Complied to ASTM A792 Standards ) (a) Base Metal Thickness 'BMT' :1.50 MM (b)Tolerance :-/+0.02 MM (c)Width of coil :914 MM (d)Tolerance :-/+ 2MM (d)Coating Mass : Coating Mass of AZ-150(e) Yield Strength :350 MPA, This item also includes provinding and fixing of all consumables at site such as anchors, Fasteners, Washers, Epoxy Paint, Lacer,Rubber Paint,Galvalume light hangers for the purpose of hanging lights and running electrical conduits etc. complete in all respects [Structural stability certificate to be provided]
M/S AARIF CONTRACTOR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .