MAINT AND CLEANING OF SEWAGE LINE, MANHOLE, DRAINAGE SYSTEM ALONG WITH REPAIRS TO CULVERT PATH AND DRAIN INCLUDING MISC B/R WORKS AT AF-II UNDER GE (AF) JAMNAGAR NO.2

Amount

Cleaning of sewage lines 100 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of sewage lines 150 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of sewage lines exc 150 but n exc 300 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning & desludging manholes/chamber depth not exc 1.0 m, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning & desludging manholes depth exc 1.0 m but not exc 2.0 m, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of gully traps by removing all sludge / waste etc including cleaning of connected pipe up to 1st Man Hole to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of floor traps by removing all sludge / waste etc including cleaning of connected pipe up to gully trap to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Removal of blockage from Indian WC / EWC by removing all sludge / waste etc including cleaning of connected pipe up to first manhole to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning & desludging septic tank of cap 25 users by pumping out sewage & sludge and disposing all waste including liquid in covered tanks outside M.O.D land, burried in ground and finally cleaning & washing with fresh water complete all as specified and directed.

Excavation in trenches or cleaning of drain n.exc 1.50 meter wide & n.exc 1.50 meter depth for foundations etc shafts, well cesspits, manholes, pier holes etc n.exc 10.00 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Demolition and breaking up 150 mm dia bore RCC / salt glazed stone ware drain pipe including PCC packing under hunching against the sides of pipe bed and complete PCC of bed and removal of debris to outside MOD land complete all specified and directed.

Demolition and breaking up 200 mm dia bore RCC / salt glazed stone ware drain pipe including PCC packing under hunching against the sides of pipe bed and complete PCC of bed and removal of debris to outside MOD land complete all specified and directed.

M&L for 150 mm bore reinforced concrete hume pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M&L for 200 mm bore reinforced concrete hume pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M & L for PCC 1:4:8 type D-1 using 20 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 150 mm bore, after they are laid and tested complete all as specified and directed.

M & L for PCC 1:4:8 type D-1 using 20 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 200 mm bore, after they are laid and tested complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil complete all as specified and directed.

Removing excavated soil/drain waste material to a distance exc 1.5 Km but n.exc 5 Km and depositing at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Cutting into existing manholes in running sewage line for connecting new drains of 150 / 200 mm internal dia of pipe, making good to walling and rendering, cutting out branch channel, and as required complete all as specified and directed.

Demolition of reinforced cement concrete (including cutting of reinforcement as required to facilitate demolition) in any position and of any description complete all as specified and directed.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for manholes/soakage well and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement steel will be measured & paid separately.

M&L for Reinforced cement concrete M-25 (20mm graded aggregate) (normal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,culverts and in shelves and the like all as specified and directed. Note:- Reinforcement steel will be measured & paid separately.

M & L mild steel TMT bars 10mm dia and over cut into length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with clips.quality conforming to Fe-410-W (Gde,E-250) complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, jointed with solvent cement , fixed on walls or floors with clamp incl dismantling of rain water pipes complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, jointed with solvent cement , fixed on walls or floors with clamp incl dismantling of rain water pipes complete all as specified and as directed.

S&F PVC (SWR) bends of 75 mm bore of any radius all as specified and directed

S&F PVC (SWR) bends of 110mm bore of any redius all as specified and directed.

S&F PVC (SWR) cowl of 75 mm bore of any radius all as specified and directed

S&F PVC (SWR) cowl of 110mm bore of any redius all as specified and directed.

S & F PVC (SWR) branch piece. Single (single Y) equal or unequal 75 mm bore fixed complete all as specified and directed.

S & F PVC (SWR) branch piece. Single (single Y) equal or unequal 110mm bore fixed complete all as specified and directed.

S &F PVC (SWR) branch piece, double (double Y) EQUAL OR UNEQUAL 75 mm bore fixed complete all as specified and directed.

S &F PVC (SWR) branch piece, double (double Y) EQUAL OR UNEQUAL 110mm bore fixed complete all as specified and directed.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap of Cast iron 100 mm , front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover with hinges, white, closed pattern with flat bottom, and cover with aluminised hinging device, 'P' or 'S' trap of 100 mm bore including all connection complete all as specified and directed.

S&F in repairs stainless steel grating with or without hole of size 150 mm x 150 mm fixed with cement complete all as specified.

S&F in repair PVC (SWR) floor trap/Nahani trap, plain with grating including jointing with solvent cement, outlet dia 75 mm, including jointing to waste pipe fixed in cement concrete 1:2:4, Type B1 using 20 mm graded stone aggregate complete.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, plain with grating including jointing with solvent cement, including jointing to waste pipe fixed in cement concrete 1:2:4, Type B 1 using 20 mm graded stone aggregate complete.

Demolition of brick / stone masonry / Block masonry work built in cement mortar or cement lime mortar complete & removal of debris to a distance exc 1.5 km but n.exc 5 Km, complete all as specified and as directed.

M&L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exc 10 cm in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars complete all as specified and directed.

Demolition Concrete of any description and in any position not otherwise specifically provided for sunken floor and similar work all specified and directed.

M & L for Broken stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all specified and directed.hg

M&L 40mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring laid in panels finished even and smooth with out using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortat (1:3) using water proofing compound @ 3% by weight of cement finished even and fair as in sunken floor and wall complete all as specified and directed. Note: WPC will be measured and paid separetely.

M&L for applying two coats of water proofing coating by using Super Latex manufacured by pidilite industries Ltd or equivalent product manufactured by Sika/ Fosroc/ Choksey mixed in chemical water and cement ratio as per manufacturer's instructions both on floor as well as on walls of sunken complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M &L for cement concrete type E-2 1:5:10 (using 40 MM graded crushed stone aggregate) as in mass filling in sunken floor of toilets and similar work complete all as specified and directed.

Cutting / drilling hole in brick wall / RCC beam or slab exc 300mm deep of WC/bath by mechanical mean and fixing with and including 40mm GI pipe as spouts pipe of require length at site, complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.

Material & Labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed.

M&L for sand filling (25mm thick sand screed bed) under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.

Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debris to a distance exc 1.5 Km but n.exc 3 Km complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (12.5mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed.

M&L for light shade colour vitrified ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 56 but in skerting including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 350x 250x 7 mm/ 450X 350X 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

Dismantling of granite, marble or kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed.

M&L for Granite of 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for 15 to 20 mm thick one piece Marble of any shade other than white and black as in steps, trade or risers of stairs, butt nosing cutting grove 2 Nos at the edge of steps to make antyskid. fixed with need cement slurry, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of Granite/ Kota stone slabs one edge, such as in steps cooking plateform, and other similar situation.

S&F in repairs waste coupling of PTMT of bore dia 40mm (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

S&F in repairs for health faucet including PVC connection 1 mtr complete all as specified and directed.

Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed.

Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed.

Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle 18322 Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, fixed in position and connecting complete all as specified and directed.

S&F in repairs for 750 mm long PVC waste pipe including all fitting complete all as specified and directed.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete.

S&F in repairs 20 mm size Ball valve high pressure of PTMT with Epoxy Coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 15 mm-142 gms / 20 mm-210 gms / 25 mm-455 gms / 40 mm-690 gms / 50 mm-1240 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25 mm size Ball valve high pressure of PTMTwith Epoxy Coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 15 mm-142 gms / 20 mm-210 gms / 25 mm-455 gms / 40 mm-690 gms / 50 mm-1240 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

Dismantling water tanks of any description, 250-500 litre capacity and removing from site.

Dismantling water tanks of any description, 500-1000 litre capacity and removing from site.

S&F Rotational moulded polyethylene water storage tanks tripple layer. (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity, all as specified in SSR Part-I.

S&F Rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity, all as specified in SSR Part-I.

S&F in repair water storage tank covers of any size at any height complete all as specified and as directed.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F for 450 mm long PVC connections 15 mm size with PTMT nuts at both ends complete all as specified and directed.

S&F for 600 mm long PVC connections 15 mm size with PTMT nuts at both ends complete all as specified and directed.

Cleaning and removing all scale and dirt etc cepacity exc 250 & n exc 500 ltrs from tanks and from mouths of circulating pipes, etc

Cleaning and removing all scale and dirt etc cepacity exc 500 & n exc 1000 ltrs from tanks and from mouths of circulating pipes, etc

S & F in repair Brass CP mixer of 15mm dia of mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair Pillar taps cast copper alloy, chromium plated, screwed down high pressure with with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repairs Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and directed.

S&F in repairs Swivel shower of PTMT any Colour for fixing with 15mm pipe (Minimum weight 40 gms) complete all as specified and directed.

S & F in repairs Gun metal gate valve, with iron wheel head screwed both ends for 20 mm bore pipe complete all as specified and directed.

S & F in repairs Gun metal gate valve, with iron wheel head screwed both ends for 25 mm bore pipe complete all as specified and directed.

Dismantling of wrought iron or mild steel work (i.e. purlin wind tie and similar works etc) or of any description not other wise provided for complete all as specified and directed.

Dismantling fencing wire mesh / chain link fencing, any type all as specified and directed.

S & F posts struts in fencing with hole size 50mm to 100mm and wire thickness 3mm to 5mm with coating including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F PVC coated chain link fencing 50 x 50 x 3.9mm thick mesh secured with MS flats, straining bolts including provision of binding wire complete all specified and directed. Note : Straining bolts, nuts and washers flat iron and 10mm dia round bars shall be, measured and paid seperately.

M & L for rendering 15mm thick on fair face of concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with need cement slurry, laid over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.

sanu enterprise

Suraj Builders

aarti construction

SohanandCompany