New Construction of P.M. Room & SITC of Lift With Lift well At SDH Dhoraji , Ta. Dhoraji, Dist. Rajkot

Name of Work :- New Construction of P.M. Room At SDH Dhoraji & SITC of Lift With Lift well at SDH Dhoraji , Ta. Dhoraji, Dist. Rajkot

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Demolition including stacking of serviceable materilas and disposal of Rupees One Thousand One

1 20002.00 2.00 unserviceable materials with all lead and lift. (i) R.C.C. work 1133.89 Hundred Thirty Three and Cmt

Eighty Nine Paise

Demolition of Brick work and stone masonry including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.(ii) In Rupees Five Hundred Eighty

Cement Mortar. Nine and Seventy Paise

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of Rupees Twenty and Eighty

unserviceable from site of work with all lead and lift Four Paise

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Rupees One Hundred Twenty

Loose or soft soil Eight and Seventy Nine Paise

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Rupees One Hundred Sixty

Dense or Hard soil Four and Eighty Two Paise

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Rupees Two Hundred Seventy

Murrum Nine and Eighty One Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

stacking of useful materials and disposing off the excavated stuff upto 50 Meter Rupees Three Hundred and

lead.(C) Hard Murrum Eighty Nine Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

stacking of useful materials and disposing off the excavated stuff upto 50 Meter Rupees Three Hundred

8 04002D 13.00 316.22 Sixteen and Twenty Two Cmt

lead. (D) Soft rock not requiring Blasting Paise

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal size) and curing complete excluding cost Rupees Three Thousand

9 05010AA 20.00 of formwork in (A) Foundation and Plinth 3772.13 Seven Hundred Seventy Two Cmt

and Thirteen Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

Rupees Seventy Seven and

10 05014C 11254.00 binding and placing in position complete upto floor two level

Twenty Nine Paise

Providing and laying controlled cement concrete M250 work with curing etc.

complete including the cost of form work but excluding cost of Reinforcement for

RCC work in (A) Foundation footing base of columns and mass concrete. Rupees Four Thousand Two

11 RA 23.00 4220.92 Hundred Twenty and Ninety Cmt

Providing & laying controlled cement concrete M-250 with curing etc. complete

Rupees Eight Thousand Fifty

12 RA 4.00 incl. the cost of form work but excluding the cost of rainrorcement for R.C.C.

Five and Seventy Six Paise

work up to floor two level for column.

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork and excluding the cost of rainrorcement work in Rupees Four Thousand Eight

13 RA 75.00 4821.74 Hundred Twenty One and Cmt

(B) Fins, Walls, from foundation level upto Any Height. Seventy Four Paise

Provinding and Laying controlled cement concrete M-200 and with curing

etc.complete. Including the cost of formwork but excluding the cost of Rupees Six Thousand Three

14 RA 6.90 reinforcement for R.C.C work in beam heving any cross section area of BEAM. 6312.50 Hundred Twelve and Fifty Cmt

Providing and Laying controlled Cement Concrete M-200 and curing etc.

Rupees Four Thousand Nine

Complete including the cost of form work but excluding the cost of reinforcement

15 RA 14.50 4968.19 Hundred Sixty Eight and Cmt

for R.C.C. work at Ground Floor for Slabs & Shelves etc. Nineteen Paise

Providing and laying controlled cement concrete M200 work with curing etc. Rupees Five Thousand Eight

16 RA 3.20 complete including the cost of from workbut excluding cost of Reinforcement for 5838.31 Hundred Thirty Eight and Cum.

RCC work in LINTEL & COPING (G.F.) Thirty One Paise

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Provinding and Laying controlled cement concrete M-200 for reinforced conerete

chhajja not exceeding 10cm thickness up to floor two level including finishing the Rupees Four Thousand Seven

17 RA 0.50 exposed surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth 4720.84 Hundred Twenty and Eighty Cum.

surface ,centering and formwork and curing complete. excluding cost of Four Paise

reinforcement for GF

White Stone Bela mesonry block in course in superstructure with stone of

Rupees Five Thousand One

approved quality in Cement Mortar 1:5 (1- Cement :5- course sand) including

18 07010A 52.90 5109.37 Hundred Nine and Thirty Cmt

packing the joints etc. complete. Seven Paise

White Stone Bela mesonry block in course in superstructure with stone of

approved quality in Cement Mortar 1:6 (1-Cement : 6- course sand) including Rupees Five Thousand Eighty

packing the joints etc. complete. Two and Forty Six Paise

White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement Rupees Four Hundred Ninety

Mortar 1:4 ( 1- Cement : 4- course sand) (b) Conventional Five and Forty Eight Paise

Filling available excavated earth (excluding rock) in trenches. plinth,

Ch-4 Rupees One Hundred Thirty

21.70 sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating

Seven and Forty Seven Paise

each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

4008 It . No 0 Rupees Two Hundred Ninety

17.40 thickness including watering, ramming and consolidating etc. complete.

Nine and Sixty Seven Paise

4007 It . No Filling in plinth with sand under floors including watering ramming, Rupees Four Hundred Seventy

4.24 page-6 consolidating, and dressing etc. comp. Seven and Thirty One Paise

Providing 10mm thick cement plaster in single coat on brick/concrete walls for

interior plastering upto floor two level and finished even and smooth in (i)

Rupees One Hundred Forty

24 17001A 102.80 Cement mortar 1:3 (1- cement :3-sand)

One and Ninety Two Paise

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished Rupees One Hundred Eighty

even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Eight and Ninety Eight Paise

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

Rupees Three Hundred Thirty

26 17009.00 544.60 sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

and Seventy Two Paise

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

Rupees One Hundred Thirty

27 18031 + 18032 304.00 throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface

Rupees One Hundred Twenty

28 19031.00 854.60 to remove all dirt, and remains of loose powdered materials.etc complete

Two and Fourteen Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing flooring and Rupees One Thousand Five

29 14022A 28.00 1546.85 Hundred Forty Six and Eighty Smt

jointed with color cement slurry including finised with flush pointing & cleaning Five Paise

the surface etc. complete for light shade

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. Rupees One Thousand Five

30 14036.00 159.30 1559.10 Hundred Fifty Nine and Ten Smt

Providing & laying Precast cement concrete Tactile 300mm x 300mmx 25mm

thick with aggregate of size upto 6mm laid on floors, ramps, treads of steps and

landing on 20 mm thick bed of cement mortar 1:6 (1-Cement : 6 coarse sand) Rupees Five Hundred Twenty

jointed with neat cement slurry with pigment to match the shade of tiles complete Three and Eighteen Paise

with precast tiles of Dark shade (Red/Yellow ) using ordinary cement

Providing and laying machine cut free edges machine polished Kota stone for

shelves in cupboard and walls in single piece (Maximum 150) 25 mm including Rupees Four Hundred Fifty

cutting grooves in walls and fixing the stone with neat cement slurry in true line and Eighty Six Paise

and level as directed . etc. complete. for Shelves

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

CH.14 IT. Providing & laying polished Kota stone slab flooring (600 mm X 600 mm) over

20 mm (average) thickbase of cement mortar 1:6 (1 cement : 6 coarse sand) or Rupees One Thousand

33 18.90 1019.39 Nineteen and Thirty Nine Sqm.

14.43 L.M. 1:1.5 laid over and jointed with gray cement slurry including rubing & Paise

Mirror polishing etc. complete. (A) 25 mm thick

Providing and laying machine cut free edges machine double polished Granite

stone for shelves/sill/jam in walls in single piece 18 mm thick including cutting Rupees One Thousand Eight

34 RA 50.62 grooves in walls and fixing the stone with cement mortar 1:4 and finishing the 1838.20 Hundred Thirty Eight and Smt

same with neat cement slurry in true line and level as directed . etc. complete. Twenty Paise

(All Open edges should be full round polished)

Providing and fixing M.S. grills of required pattern to wooden frames of windows

etc. with M.S. flats at required spacings and frame alround, square or round bars

Rupees One Hundred

35 10025AA 600.00 with round headed bolts and nuts or by screws (A) Plain Grill.

Fourteen and Forty Four Paise

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams and Rupees Nine Thousand One

36 11002AA 14.29 joists, channels angles Tees, flats, with connecting plates or angle cleats as in 9108.48 Hundred Eight and Forty Qtl

main and cross beams. Hip and jack rafters, purlins conneted to common rafters Eight Paise

Providing proprietary Acrylic Polymer modified cementations water proofing,

System to horizontal rocf and part of parapet (300 mm hight) including

providinhg and laying broken china moasiaca tile over 50mm thick CC 1:2:4

flooring and mortar 1:3 grouthing with white cement slurry with matching

pigment including mixing of water proofing compound with cement mortar (plan

area to be measured) with 10 years guarantee 1. Cleaning the roof surface by

means of wire brush to make it free from all dust, loose particle, letents etc.

Add. Cutting groove at height 300mm from finished roof surface all along the parapet / Rupees One Thousand

37 Specificatio 42.00 1072.61 Seventy Two and Sixty One Smt

vertical walls. 3. Applying one coat of Acrylic polymer modified. Cementitious Paise

slurry coating over RCC roof slab and continue upto groove at a height of 300mm

from finished roof slab. 4. Laying fiber glass cloth over coated surface while the

coating is still green. 5. Laying a protective layer of screed concrete (1:2:4) in

slope (Averge thickness 50mm) 6. The quoted rate shall include the provision of

chequered making strings while top layer of IPS (1:2:4) is green.

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC.

As Per 6131_paret-II Consentration Weight one percent is recommended i.e one Rupees One Hundred Twenty

litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of Four and Thirty Five Paise

one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Providing and fixing 35mm thick good quality flush door shutter with 01 mm

laminated sheet of Royal Touch,Durian ,Green lam or equvalent both side and

Rupees Four Thousand Six

39 RA 6.30 necessary aluminium fixtures and fastening as per satisfaction of Engineer in

Hundred Forty Six Only

charge and applying primer putty and two coat of oil paint etc. complete

Providing and fixing window having extrudedaluminum Colour anodized section

frame mainouter size 95mm x 24mm x 1.17mm (of JindalSection no:2459 @

wt.of 0.738 Kg/mt),horizontal Three track member size 92mm x31.75mm x

1.30mm (of Jindal Sectionno:8688,@ Wt.1.07 Kg/mt), vertical member ofsize

92mm x 31.75mm x 1.50mm (of JindalSection no:8933,@ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40mmx18mm x1.29mm (of Jindal Rupees One Thousand Five

40 4.35 Sectionno:8947@ wt.of 0.456 Kg/mt), vertical memberof size 40mm x 18mm x 1583.95 Hundred Eighty Three and Sqm.

1.29 mm (of JindalSection no:8949 @ wt.of 0.456Kg/mt/ with 5mm th transparent Ninety Five Paise

bronze colour tinted floatglass with powder coated aluminum fittings & Fix

fixturesl S.S. Mosquito net and two Sliding Shutter transparent silicon sealant

glass and one Sliding Shutter S.S.Wire gauge of I.S.I gauge designation 85 G

with wire of .56 mm fixing to frame as per details etc

Providing and fixing extruded alluminium window section of size 63mm X

Rupees One Thousand One

11030 Item 38.10mm X 1.2mm (of jindal Section no : 2434 @ wt. of 0.643 kg/mt.), with

41 1.10 1175.56 Hundred Seventy Five and Sqm.

No.0.00 Pg.82 colour anodizedalluminium frame For Ventilation with 5mm thick frosted glass Fifty Six Paise

as per details etc com plete for Ventilation

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Providing and fixing Sandwich type Granite platform including supplying and

fixing granite stone 18 mm thick mirror polished 1st quality Granite stones in top

and Vertical side posiition and vertical strip at front over 25 mm thick polished

kotah stone platform fixing in top and sides and intermediates supports( at Every Rupees Six Thousand Thirty

one Mtr C/C) fixing with cement mortar and adhesive and finishing including Seven and Seventy Eight Paise

cutting for fixing of sink 600x450x150mm size (As per drawings and

instruction given by authority and E.I.C.) at required position etc complete.

Providing and fixing 18mm thick Heavy PVC shutters of 55 kg/cm2 density for

cupboard cabinet on shutter with PVC frame of size 50 mm x 30 mm including Rupees Five Thousand Eight

43 R.A. 3.50 materials & necessary S.S fixtures and fastening as handles, lock, stopper, hinges 5847.50 Hundred Forty Seven and Sqm.

etc. complete as directed by Engineer-in-charge . Fifty Paise

Providing and fixing 0.90cm high 50mm dia 16G ASIS 304 Grade pipe railing as

per detailed drawing with 32x32mm 16G ASIS 304 Grade Pipe @ 1.0mt or as per Rupees Three Thousand Four

44 R.A. 10.00 required interval with passing 16mm Dia 16G ASIS 304 Grade pipe bar and 3477.43 Hundred Seventy Seven and Rmt

necessary hold fast and fixing in line and level etc. complete. Forty Three Paise

Applying two coats of birla(White cement based) or Asian (acrylic lappy putty) or

equivalent two coats of primer of approved brand and manufacture on new wall

Item code Rupees Forty and Fifty Nine

45.00 surface to give an even shade including thoroughly brushing the surface free from

mortar dropping and other matter foreign and sand papered smooth.

Painting two coats (including priming coat ) on new steel & other metal surfaces

Sr No 19002, Rupees One Hundred Thirty

11.00 with sythetic enamel paint brushing interior to give an even shade including

Four and Seventy Three Paise

cleaning the surface of all dirt , dust & other foreign matter.

Providing & laying 50 mm thick cement concrete flooring 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer

finished with a floating coat of neat cement to required slope including ramming

at junction of wall and slab after two days of proper curing applying broken china

mosaic flooring for plain and curve surface 12mm to 20mm white colour broken Rupees One Thousand One

47 27.40 piece of glazed tiles to be laid over 12mm thick cement mortar bedding of CM 1134.92 Hundred Thirty Four and Sqm.

(1:3) to plain and slop and to be tampered to bring mortar cream up to surface Ninety Two Paise

with using white cement and incl. Rounding of junctions and extending them up to

15 cm along the wall and curing with bends any patterns or design as per drawing

and direction incl. cleaning with water and oxalic acid

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40)

including fitting make or equivalent as approved by Engineer In charge. Pipe shall

23061 Item No. be fixed on the wall with the help of clamp at everytwo meter C/C or shall be Rupees Seventy Two and

Pg.152 concealed as directed including necessary fitting etc. including testing of pipe and Sixty Five Paise

joints and fixing the same with adhesive solvent, including cost of all materials. (i)

Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40)

including fitting make or equivalent as approved by Engineer In charge. Pipe shall

23062 Item No. be fixed on the wall with the help of clamp at everytwo meter C/C or shall be Rupees Ninety One and

Pg.152 concealed as directed including necessary fitting etc. including testing of pipe and Eighty Four Paise

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure

23004G Item polythelene pipes of the following outside dia. high density, complete with special Rupees Three Hundred Thirty

No.23.8 Pg.145 flange compression type fittings wall clamps etc. including making good the wall, Nine and Five Paise

ceiling and floor 110mm

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jali of the

23068 Item following nominal diameter of self cleansing design with C.I. Scread down or Rupees Six Hundred Fourteen

51 No.NEW 2.00 614.19 Each

Pg.153 hinged grating including the cost of cutting and making good the walls. (i) 100 and Nineteen Paise

23019+23020B Providing and fixing ( 600 X 450 X 150 mm) size vitreous china laboratory sink

+23021B Item with CI or MS brackets painted white including cutting holes in wall and making Rupees Two Thousand Five

52 No.23.13+23.1 1.00 good the same 40 mm dia CP waste couplin rails etc. complete. 2505.13 Hundred Five and Thirteen Each

35+23.136 Paise

Sr No Providing and fixing 15 mm dia brass chromium plated screw down bib taps. Rupees One Hundred Eighty

23028A1 Six and Eighty Three Paise

Providing and fixing brass Cromiam Plated Sergical handle Cock of Size 15mm Rupees Eight Hundred Eight

23031C Item Providing & fixing gun metal check or non-return full way wheel valve (C)25 mm Rupees Four Hundred Twenty

dia and Sixty Three Paise

23024 Item Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass with

Rupees Eight Hundred Fifty

56 No.23.143 1.00 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs

Nine and Forty One Paise

Pg.148 with C.P brass screws and washers.

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

23025 Item Providing & fixing C.P. Brass towel rails complete with C.P. brass brackets fixed

Rupees Six Hundred Sixteen

57 No.23.144 1.00 to wooden plugs with C.P. brass screws (B) 600 mm x 20 mm size

and Forty Two Paise

Const. of brick masonary chamber for under ground inspection chambers & bends

with brick having crushing strength not less than 35 Kg. / cm² in C.M. 1:5 precast

24016A Item R.C.C. top slabs with 1:2:4 (1-cement, 2-course sand : 4-graded stone aggregate Rupees Two Thousand Nine

58 No.24.44 2.00 20 mm nominal size) foundation concrete 1:5:10 in side plaster 15 mm thick with 2932.93 Hundred Thirty Two and Each

Pg.163 C.M. 1:3 finished smooth with floating coat of neat cement on walls & bed Ninety Three Paise

concrete, inside dimension 455x 610 mm and 450 mm deep for single pipe line.

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

22014 Item Rupees Three and Ninety Five

1000.00 required capacity each with all necessary fittings and connection etc. complete on

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base frame covered Rupees Four Hundred Eighty

with textured/metallic/white front plate modules erected on / in wall / ceiling as Five and Eighty One Paise

per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic/Wooden box, Rupees Six Hundred Seventy

single mounting base frame covered with textured/metallic/white front plate Four and Sixty Eight Paise

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with Rupees Five Hundred Ten and

following type of accessories. Five Paise

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

Rupees Seven Hundred Forty

99 3.00 board. (f) with medium class Rigid PVC pipe and accessories erected concealed

Five and Thirty Eight Paise

in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame Rupees Two Hundred Fifty

covered with textured / metallic/white front plate modules erected on / in wall / Seven and Fifty Five Paise

ceiling with following type accessories

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

Rupees Twenty Four and

101 1-3-2 10.00 fittings & Junction boxes fixed with adhesive solution & Clamps with following

Twenty Four Paise

dia of pipes, in approved manner as directed

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Rupees Eighty Two and

insulated stranded wire of green colour for earth continuity of following size (A) Eighty Two Paise

With medium class Rigid PVC pipe and accessories b) 2 wire 2.5 Sq.mm.

Providing & erecting Switch board for Computer or electric apparatus consisting

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as Rupees One Thousand One

103 1-6-2(B). 1.00 1133.22 Hundred Thirty Three and Mtr.

directed Twenty Two Paise

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp Rupees One Hundred Twelve

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP and Eleven Paise

holder (ii) 5 to 8 watts

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED Rupees Three Hundred

105 2-15-1. 4.00 373.70 Seventy Three and Seventy Mtr.

LED driver efficiency > 85 % Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminium housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire Rupees Two Thousand Two

106 2-16-1. 1.00 2201.80 Hundred One and Eighty Mtr.

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- Paise

79 & LM-80 certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-voltage

protection. (iii) above 24 to 36 watts

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Rupees Seventy Nine and

trench / pipe of following size of cables. (A) 2 core 4 Sq. mm Seventy Nine Paise

Supplying & erecting single phase approved make industrial exhaust fan suitable

for medium duty ring mounted low noise operation suitable for medium duty Rupees Two Thousand Fifty

having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Four and Thirty Four Paise

Providing suitable M.S. louver shutter of the Exhaust fan. Rupees Three Hundred Sixty

Eight and Sixty Five Paise

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm Rupees One Thousand Nine

110 5-1-6. 2.00 sweep complete having 3blades with aluminium blades with , canopy & 30 cms. 1948.29 Hundred Forty Eight and Ea.

down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(Make shall be Twenty Nine Paise

approved by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

Rupees One Hundred Eight

111 5-2-1. 2.00 rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible

and Seven Paise

wire with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box Rupees One Hundred Eight

/ Heavy Duty PVC box complete erected concealed in Ceiling with necessary and Seven Paise

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen and Eighteen

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of quick Rupees One Thousand Nine

114 3-12-1. 1.00 1969.50 Hundred Sixty Nine and Fifty Ea.

action & tripping with all advance feature & do not incorporate any electronic Paise

component. for following Max. rating erected as directed (i) 25 Amps.DP Cat

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. Rupees One Hundred Seventy

MCB. Six and Seventy Five Paise

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Supplying & erecting funnel type earthing having earth plate of following size

burred in specifically prepared earth pit 3 mtr. below ground with 40 kg.

charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe

with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover

complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Rupees Two Thousand Five

116 3-14-12. 1.00 2568.43 Hundred Sixty Eight and Forty Ea.

Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 Three Paise

mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear

with end socket as per direction & duly tested by earth tester confirming to IS (As

per drawing) with following specification (B) With 45 x 45 x 0.35 cms. C.I. earth

Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Rupees Seven Hundred Ninety

Four and Eighty Seven Paise

“ B ” class Galvanised iron pipe having smooth finished bore of the pipe on both

Rupees Two Hundred Forty

118 6-5-5. 1.00 ends erected nuts and bolts along the pole / wall shaping the pipe as per site

Nine and Forty Seven Paise

requirement. Pipe dia as following. (c ) 40 mm dia.

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift

having following main features: [1] GEAR LESS LIFT DRIVE comprising of

High Starting torque Lift duty 3 phase 440 V A. C. Permanent magnetic

synchronous motor of proper rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response, UP/DOWN

hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and

Rupees Twenty Lac Twenty

safety controls. [3] Car with M S platform with bracings of adequate size and to

119 13-1-AQ 1.00 2023094.64 Three Thousand Ninety Four Ea.

sustain the impact load cabin + passenger with safety factor of fire for steel and and Sixty Four Paise

side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be

of anti skid PVC with choice of colour of engineer in charge. Car doors shall be

of stainless steel grade 304, hairline finish with centre opening / telescopic

automatic doors. Car panel will also be S.S. 304 finished with emergency stop

device, mechanical door safety device, facility of auto/ attended mode. All car

panel buttons and all floor switches must be with brail language as per lift act.[4]

All landing doors shall be fully automatic centre opening/ telescopic opening

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

[5] Appropriate battery operated emergency light in the car along with alarm

switch shall be provided.

[6] Digital scrolling indicator system for up-down arrow along with floor position

indicator shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple criss / crossing light beams shall be

120 No Rupees Only

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger

[9] Audio visual indication in the lift car showing over loading shall be provided

such that doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan with automatic sleep timer shall be provided.

[12] Voice annunciater with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be

provided in control panel.

[14] Mechanical over speed governor, door key holes in the floor doors, fireman

switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey

ladder for lift pit should be provided by the lift agency, along with the other steel

121 No Rupees Only

structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where

ever required as / if directed by engineer in charge.[17] Permanent wiring in lift

machine room and lift well with proper numbers of light points, with fixtures,

exhaust fan and plug points shall be provided by the agency. Power supply of

phase 440 V shall be made available by department in lift machine room.

[18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without any

extra cost.(granite/marble fixing around all landing door openings are not in lift

[20] As per statutory requirement of Got. Of Gujarat lift & escalator act 2000, lift

agency has to provide

1. Car top safety barricade

122 2. Push & talk communication system. No Rupees Only

3. Fireman's switch operation at 15/16 Passengers, Ground plus 3 upper floor

with Rated Speed of 1.0 m/sec., (C) With General PLUS ADDITIONAL

SPECIAL FEATURES attached herewith. Prem. Cat.

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Providing & erecting approved make overload non-start feature & overload

warning Indicator system in the lift with making use of sound isolated floating

platform & micro switches on SI frame to get sensation of live load inside lift

cage at any given moment, with provides new fixtures of overload warning inside Rupees Thirty Two Thousand

123 13-2-2 1.00 lift cage with new relay in the existing control panel to activate ‘Overload Non- 32527.05 Five Hundred Twenty Seven Ea.

Start Function with carrying out additional wiring including laying of new and Five Paise

travelling cable, include minor civil work & without changing the existing

capacity speed stops, travel & operation of the desired lift

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV Rupees Seven Hundred

124 4-2-1. 87.00 grade to be erected as directed of following size. (N) 4 core 16 Sq. mm 728.21 Twenty Eight and Twenty One Mtr.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including value of earth

Rupees Five Thousand Eight

resistance of installation duly stamped and signed by agency and officer Incharge

125 3-14-10 1.00 5842.85 Hundred Forty Two and Ea.

has to ensure the value of earthing resistane mentioned in test Certificate) & Eighty Five Paise

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency.[A] For electrical installation up to

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell push & accessories and

Rupees Four Hundred Forty

126 1-2-1. 4.00 earth continuity of following type, erected on PVC / Metallic box, single 449.45 Pt.

Nine and Forty Five Paise

mounting base frame covered with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed. (a) with medium class Rigid PVC pipe and

accessories Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered Rupees Four Hundred Seventy

with appropriate front plate modules erected on / in wall / ceiling as per pipe Five and Seventy One Paise

erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu.

Wire (a) with medium class Rigid PVC pipe and accessories Cat. III

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid PVC Rupees Seven Hundred Eleven

pipe and accessories Cat. III and Four Paise

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic box, single mounting base frame covered with textured / Rupees Two Hundred Fifty

metallic front plate modules erected on / in wall / ceiling with following type Seven and Fifty Five Paise

accessories Cat. III

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp Rupees One Hundred Twelve

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP and Eleven Paise

holder (ii) 5 to 8 watts

Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Rupees Seven Hundred Ninety

Four and Eighty Seven Paise

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of Rupees Three Thousand Forty

quick action & tripping with all advance feature & do not incorporate any and Ten Paise

electronic component for following Max. rating erected as directed.(iii) 63 Amps.

RATE (With 1% L.C.)

SR NO. NBO NO. TOTAL QTY ITEM DESCRIPTION IN FIGURS UNIT AMOUNT

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Rupees Seven Hundred Thirty

133 3-10-5. 2.00 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

Seven and Thirty Paise

having following capacity (c)63 Amp.

In words Rupees Rupees Fifty Three Lac Seventy Two Thousand Five Hundred Eleven and Sixteen Paise

I / We am/are willing to carry out the work at __________________________________________________ % Above / Below

percent ( Should be written in figures and words ) of the Estimated rates mentioned above. Amount of my/our tender works

Estimated Amount put to tender Rs.

Add/Deduct ______________________% above/ below Rs.

In words Rupees

1 All works shall be carried out as per Public Work Department Handbook and other specification of Division or as directed.

2 All the columns in Schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature

3 Rates quoted include clearance of site ( prior commencement of work and at its close ). In all respect and hold good for work under all condition, site, moisture, weather etc.

4 Serviceable material available ( if any ) after Demolishing / Dismentalling any item should be hand over to the concerned PIU Site Engineer In Charge as per instruction.

Signature of the contractor with Seal Signature of Contracting Authority with Seal