PROVIDING AND FIXING LED STREET LIGHTS IN VARIOUS 03 LOCATIONS (GUPTESWAR AREA, BALAJI PARK SOCIETY, GANESH RESIDENCY) AT TALALA DIST. GIR SOMNATH SOMNATH (2nd Attempt)

NAME OF WORK: - PROVIDING AND FIXING LED STREET LIGHTS IN VARIOUS 03 LOCATIONS

(GUPTESWAR AREA, BALAJI PARK SOCIETY, GANESH RESIDENCY) AT TALALA DIST. GIR SOMNATH

UNDER SJMMSVY 2025-26 SCHEME (2nd Attempt)

SR. NO. DISCRIPTION AMOUNT

SCHEDULE LED STREET LIGHT IN VARIOUS STREETS OF GUPTESWAR AREA AT

B-1 TALALA DIST. GIR SOMNATH UNDER SJMMSVY 2025-26 SCHEME

SCHEDULE LED STREET LIGHT IN BALAJI PARK SOCIETY AT TALALA DIST. GIR

B-2 SOMNATH UNDER SJMMSVY 2025-26 SCHEME

SCHEDULE LED STREET LIGHT GANESH RESIDENCY AT TALALA DIST. GIR SOMNATH

B-3 UNDER SJMMSVY 2025-26 SCHEME

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs. 41,96,019.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

Net Rs. Net Rs.

In words In words

President, Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika

TALALA NAGARPALIKA -TALALA

NAME OF WORK :- LED STREET LIGHT IN VARIOUS STREETS OF GUPTESWAR AREA AT

TALALA DIST. GIR SOMNATH UNDER SJMMSVY 2025-26 SCHEME

Description Qty Unit Rate Amount

Mains with 1.1 KV Grade FRPVC insulated ISI marked

standard copper conductor wire in existing pipe erected

1 with 1.5 sq.mm. copper conductor FR PVC insulated

standard wire of green color for earth continuity of

following size. c) 3 wire 1.5 sq.mm. 350.00 Mtr 62.62

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95,

2 THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (i) above 36 to 48 watts Cat-lll 70.00 Ea. 3345.12

Providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

Mark - Cat-III 70.00 Ea. 270.68

Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (a) 6 to 32 A. Cat - III 1.00 Ea. 578.73

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand

capacity of 6 KA and suitable for operation on 3 phase and

5 neutral 415V. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as

directed. (ii) 40 Amps. FP cat - III 1.00 Ea. 2637.11

Pipe type earthing having 150 cms. Long and 2.5 cms. Dia.

Galvanised iron pipe with coupling and bunch buried in

specially prepared earth pit complete with necessary 8 SWG

earth wire. 70.00 Ea. 368.65

for using salt and charcoal/coke as required for pipe type

earthing 70.00 Ea. 171.70

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (B) 4 core 6 Sq. mm 1140.00 Mtr 126.25

Making trench in soft soil of suitable width of 90 cms deep

for laying cable or locating the fault all over the run and

backfilling the same and making the surface as normal

ground. 1050.00 Mtr 55.55

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below ground

/ road surface for enclosing cable and back filling the same

to make ground as per original. (A) 50 mm dia 1120.00 Mtr 62.62

Solderless crimping type aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

11 pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

Supply of approved make GRP / FRP Pole having following

specifications: GRP Light Pole made by CNC filament

winding machine using thermoset resin polyester/epoxy

resin system) having minimum 62% glass content. The pole

should be in one piece and tapered round in shape, having

12 smooth finish and should be totally free from corrosion as

well as non conductive & shock proof Pole should be

provided with FRP Anchor Base and it should be heavy duty,

or MS Material duly painted with Epoxy paint. Pole should

be flame retardant as per IS 6746. Resin used shall be UV

resistance and pigmented.

A highly weather resistant polyurethane coating shall be

applied to the pole after applying suitable primer system

that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole

shall not exceed more than 10% of the length of pole for the

given load“? Pole should be generally made as per the

dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI C

136.20 latest version or ASTM D 4923/01 . The size of pole

and type of installation are as below .

(1) Suitable for base plate mounting single arm Bracket.

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm Top/

Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight

of Pole 32 kg approx. (Without Base) Anchor Base (Size

Providing FRP arm bracket of having 2 sets of suitable

SS304 hardware for fixing the brackets & spread of

Mtr(Suitable for 89 to 114 mm pole top dia)

(a) Single arm bracket 70.00 Ea. 2551.26

Providing M-20 / 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of size

x 45 x 100 cms. Deep in below ground level with plinth of

cms x 45 cms (or 45 cms dia x 45 cms) high upper ground 70.00 Ea. 809.01

level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole)

Supplying & erecting MINI SECTION PILLAR 75 x 60 x

cms fabricated from 16 Gauge thick joint legs M.S. Sheet with

angle iron legs 45 cms long made from 35 x 35 x 5 mm thick.

Jointless M.S. Angle with cable clamps to be buried in ground

to have appropriate erection to work Uniform Until erected

with cement concrete foundation and 45 cms high bricks

work finishing with plaster etc. hinged double door with 3" x

4" vision panel covered with Mesh & V. panel overlapping

with flap for meter reading internally supported on both

15 side, with internal and outside looking arrangement with

look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two

Nos. one is welded and other with nut and bolt for erecting

bakelite sheet. Painting the Section Pillar inside and out side

with three tank powder coated paint.. Section pillar roof

should be without joint with water leakage proof & tested as

per IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

45 cm section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm thick

MS angle. 1.00 Ea. 3595.60

Supplying and erecting Bakelite sheet 12mm thick HYLAM

make on existing angle iron frame. 2.00 sq.mtr. 2311.89

Supplying & erecting approved make time switch with single

pole air break contacts suitable for 230 V.15/16A.complete

with self-starting motor driven clock ‘ON’ &’ OFF’ automatic

arrangement at any predetermined time during each

hours, With nickel cadmium rechargeable battery backup

erected as directed. 1.00 Ea. 2354.31

Supplying & erecting power contactor for time switch

18 complete erected as per direction [D] 4 Pole 440 V 40 Amps.

Cat III 1.00 Ea. 2782.55

/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered

amount mentioned above.

Tendered amount put to tender Rs. 41,96,019.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika

TALALA NAGARPALIKA -TALALA

NAME OF WORK :- LED STREET LIGHT IN BALAJI PARK SOCIETY AT TALALA DIST. GIR

SOMNATH UNDER SJMMSVY 2025-26 SCHEME

Description Qty Unit Rate Amount

Mains with 1.1 KV Grade FRPVC insulated ISI marked standard

copper conductor wire in existing pipe erected with

1 sq.mm. copper conductor FR PVC insulated standard wire of

green colour for earth continuity of following size. c) 3 wire

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminium housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V ,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings. The Engineer in charge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(i) above 36 to 48 watts Cat-lll 45.00 Ea. 3345.12

Providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

Mark - Cat-III 45.00 Ea. 270.68

Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to

IS :8828 in existing box having following capacity

(a) 6 to 32 A. Cat - III 1.00 Ea. 578.73

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand

capacity of 6 KA and suitable for operation on 3 phase and

5 neutral 415V. having characteristic of quick action & tripping

with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed.

(ii) 40 Amps. FP cat - III 1.00 Ea. 2637.11

Pipe type earthing having 150 cms. Long and 2.5 cms. Dia.

Galvanised iron pipe with coupling and bunch burried in

specially prepared earth pit complete with necessary 8 SWG

earth wire. 45.00 Ea. 368.65

for using salt and charcoal/coke as required for pipe type

earthing 45.00 Ea. 171.70

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to 765.00 Mtr 126.25

be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 4 core 6 Sq. mm

Making trench in soft soil of suitable width of 90 cms deep for

9 laying cable or locating the fault all over the run and

backfilling the same and making the surface as normal ground. 675.00 Mtr 55.55

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable and back filling the same to make

ground as per original. (A) 50 mm dia 720.00 Mtr 62.62

Solderless crimping type aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

11 pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Supply of approved make GRP / FRP Pole having following

specifications: GRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system)

having minimum 62% glass content. The pole should be in one

piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP

Anchor Base and it should be heavy duty, or MS Material duly

painted with Epoxy paint. Pole should be flame retardant as

per IS 6746. Resin used shall be UV resistance and pigmented.

A highly weather resistant polyurethane coating shall be

applied to the pole after applying suitable primer system that

ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole

shall not exceed more than 10% of the length of pole for the

given load“? Pole should be generally made as per the

dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI C

136.20 latest version or ASTM D 4923/01 . The size of pole

and type of installation are as below .

(1) Suitable for base plate mounting single arm Bracket.

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm Top/

Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight of

Pole 32 kg approx. (Without Base) Anchor Base (Size 300X300

Providing FRP arm bracket of having 2 sets of suitable SS304

13 hardware for fixing the brackets & spread of 1.2 Mtr(Suitable

for 89 to 114 mm pole top dia)

(a) Single arm bracket 45.00 Ea. 2551.26

Providing M-20 / 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of size 45 x

45 x 100 cms. Deep in below ground level with plinth of

cms x 45 cms (or 45 cms dia x 45 cms) high upper ground

level with necessary curing and finishing in approved manner.

( for 4 & 6 Mtr pole) 45.00 Ea. 809.01

Supplying & erecting MINI SECTION PILLAR 75 x 60 x 45 cms

fabricated from 16 Gauge thick joint legs M.S. Sheet with angle

iron legs 45 cms long made from 35 x 35 x 5 mm thick. Joint

less M.S. Angle with cable clamps to be buried in ground to

have appropriate erection to work Uniform Until erected with

cement concrete foundation and 45 cms high bricks work

finishing with plaster etc. hinged double door with 3" x 4"

vision panel covered with Mesh & V. panel overlapping with

flap for meter reading internally supported on both side, with

15 internal and outside looking arrangement with look and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and outside with three tank

powder coated paint.. Section pillar roof should be without

joint with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X 35 X

5 mm thick MS angle. 1.00 Ea. 3595.60

Supplying and erecting Bakelite sheet 12mm thick HYLAM

make on existing angle iron frame. 2.00 sq.mtr. 2311.89

Supplying & erecting approved make time switch with single

pole air break contacts suitable for 230 V.15/16A.complete

with self-starting motor driven clock ‘ON’ &’ OFF’ automatic

arrangement at any predetermined time during each 24 hours,

With nickel cadmium rechargeable battery backup erected as

directed. 1.00 Ea. 2354.31

Supplying & erecting power contactor for time switch

18 complete erected as per direction [D] 4 Pole 440 V 40 Amps.

Cat III 1.00 Ea. 2782.55

/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered

amount mentioned above.

Tendered amount put to tender Rs. 41,96,019.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika

TALALA NAGARPALIKA -TALALA

NAME OF WORK :- LED STREET LIGHT GANESH RESIDENCY AT Talala DIST. GIR

SOMNATH UNDER SJMMSVY 2025-26 SCHEME

Description Qty Unit Rate Amount

Mains with 1.1 KV Grade FRPVC insulated ISI marked

standard copper conductor wire in existing pipe erected

1 with 1.5 sq.mm. Copper conductor FR PVC insulated

standard wire of green colour for earth continuity of

following size. c) 3 wire 1.5 sq.mm. 270.00 Mtr 62.62

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminium housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V, Power Factor more than 0.95, THD < 10 %, CCT 3000 K

2 to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings. The Engineer in charge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral

and, Light must have 440VAC line supply with over-

voltage protection. (i) above 36 to 48 watts

Cat-lll 45.00 Ea. 3345.12

Providing and erecting Miniature circuit breaker single

pole 0.5A to 2A system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark - Cat-III 45.00 Ea. 270.68

Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (a) 6 to 32 A. Cat - III 1.00 Ea. 578.73

Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

5 phase and neutral 415V. Having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

Rating erected as directed. (ii) 40 Amps. FP cat - III 1.00 Ea. 2637.11

Pipe type earthing having 150 cms. Long and 2.5 cms. Dia.

Galvanised iron pipe with coupling and bunch burried in

specially prepared earth pit complete with necessary

SWG earth wire. 45.00 Ea. 368.65

for using salt and charcoal/coke as required for pipe type

earthing 45.00 Ea. 171.70

Providing and erecting XLPE (IS: 7098)(I)-88 ISI

8 armoured cable multistrand / Solid Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps or in 765.00 Mtr 126.25

existing trench / pipe of following size of cables (B) 4 core

Making trench in soft soil of suitable width of 90 cms deep

for laying cable or locating the fault all over the run and

backfilling the same and making the surface as normal

ground. 675.00 Mtr 55.55

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II) with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable and back filling

the same to make ground as per original. (A) 50 mm dia 720.00 Mtr 62.62

Solderless crimping type aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

11 high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm 360.00 Ea. 6.06

Supply of approved make GRP / FRP Pole having

following specifications: GRP Light Pole made by CNC

filament winding machine using thermoset resin

polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered

12 round in shape, having smooth finish and should be totally

free from corrosion as well as non conductive & shock

proof Pole should be provided with FRP Anchor Base and

it should be heavy duty, or MS Material duly painted with

Epoxy paint. Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance and pigmented.

A highly weather resistant polyurethane coating shall be

applied to the pole after applying suitable primer system

that ensures proper adhesion of the paint. Minimum

coating thickness shall be 80 to 100 micron. Deflection of

the pole shall not exceed more than 10% of the length of

pole for the given load“? Pole should be generally made as

per the dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI

C 136.20 latest version or ASTM D 4923/01 . The size of

pole and type of installation are as below .

(1) Suitable for base plate mounting single arm Bracket.

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ± 2mm approx. approx.

Weight of Pole 32 kg approx. (Without Base) Anchor Base

Providing FRP arm bracket of having 2 sets of suitable

SS304 hardware for fixing the brackets & spread of

Mtr(Suitable for 89 to 114 mm pole top dia)

(a) Single arm bracket 45.00 Ea. 2551.26

Providing M-20 / 1:2:4 cement concrete foundation &

% PCC from bottom including excavation for the pole of

size 45 x 45 x 100 cms. Deep in below ground level with

plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high

upper ground level with necessary curing and finishing in

approved manner.( for 4 & 6 mtr pole) 45.00 Ea. 809.01

Supplying & erecting MINI SECTION PILLAR 75 x 60 x

cms fabricated from 16 Gauge thick joint legs M.S. Sheet

with angle iron legs 45 cms long made from 35 x 35 x

mm thick. Joint less M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work

Uniform Until erected with cement concrete foundation

and 45 cms high bricks work finishing with plaster etc.

hinged double door with 3" x 4" vision panel covered with

Mesh & V. panel overlapping with flap for meter reading

internally supported on both side, with internal and

outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and outside with

three tank powder coated paint.. Section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long made

from 35 X 35 X 5 mm thick MS angle. 1.00 Ea. 3595.60

Supplying and erecting Bakelite sheet 12mm thick HYLAM

make on existing angle iron frame. 2.00 sq.mtr. 2311.89

Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self-starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours, With nickel cadmium

rechargeable battery backup erected as directed. 1.00 Ea. 2354.31

Supplying & erecting power contactor for time switch

18 complete erected as per direction Cat III [D] 4 Pole 440 V

/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered

amount mentioned above.

Tendered amount put to tender Rs. 41,96,019.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika