GENERAL-Sewage treatment plant rejuvenation-Aluva Munciplaity-STP rejuvenation-General Mechanical Work-work contains rejuvenation of STP only with out modernization or capacity enhancement

Amount

Supply, fabrication and erection of MS shutter

OD29982/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges

OD30042/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

OD30047/2024-2025:Fabrication and supply of Structural steel materials as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

OD30050/2024-2025:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including handrails, ladder, etc. for the same including. alignment correcting and setting complete including the cost of all labor, machinery, incidental and conveyance, lead and lift charges etc complete but excluding the cost of materials already supplied

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Fixing Embedment

OD29972/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges

OD29974/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

85.107:Supply of MS round bar including cost of conveyance charges

OD29975/2024-2025:Fabrication and errection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD29964/2024-2025:Fabrication, Supply, erection, and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, seal seat etc. as per approved specifications, drawings and direction of dept. Officer at site including cost of labour, machinery for planing, welding, shearing, grinding etc. All leads and lifts, conveyance, incidental and handling charges etc. complete

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

4.2.2:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 20 mm nominal size)

Supply fabrication and erection of hoisting mechanism

OD30058/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges

OD30059/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

85.103:Supply of MS checquered plates including cost of conveyance charges

OD30062/2024-2025:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD30061/2024-2025:Erection of Repair shed including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD30071/2024-2025:Providing EN-8 screw rod with one number of EN8 screw shaft hand operation including cost of all materials, labour, hire charges and conveyance.

OD30074/2024-2025:Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc

Supply and Installation of Pumps

OD29389/2024-2025:Supply and Installation of sewage dewatering submersible pump.2.2 KW/3 HP,head 8 to 20M Three phase, 2.2KW/3HP Pipe size: 50mm Head range-8m to 20m Capasity 590 to 202LPM Maximum solid size 20mm. Kirloskar model ETERNA 2200 CW or equivalent.

OD29390/2024-2025:Supply and Installation of filter feed pump, Three Phase, 3.7KW/5HP,Centrifugal Monobloc Pump set Model : KDS 520,Suc 80 x Del 80mm with Cast Iron body and Impeller and Gland Packing connected to a TEFC induction motor suitable for 400/440 volts, Head : 6 to 20 mtrs , , Capacity : 24 to 11 LPS Kirloskar Model KDS 520 or equivalent.

OD29391/2024-2025:Supply and Installation of Recirculation pump Three Phase, 1.5KW/2HP self priming monoblock sewage dewatering pump set , coupled with totally enclosed fan cooled induction motor Capacity - 5.9 to 1.5 LPS Head Range-8m to 20m Power -2 hp Solid handling - 20MM Kirloskar Model SP1HM or equivalent

OD29392/2024-2025:Supply and Installation of Sludge Transfer Pump Three Phase, 1.5KW/2HP self priming monoblock sewage dewatering pump set , coupled with totally enclosed fan cooled induction motor Capacity - 5.9 to 1.5 LPS Head Range-8m to 20m Power -2 hp Solid handling - 20MM Kirloskar Model SP1HM or equivalent

OD29394/2024-2025:Supply and installation of Single phase Dosing pump operating on 230V 50 Hz. Flow rate Max. 12.1 LPH @ 1.5 Bar Max injection pressure 2 kg/sq.cm Speed adjestment 0 to 100 spm including all accessories.

Supply and installation of reduction gearbox and motor

OD29395/2024-2025:Supply and installation worm Reduction gearbox for Agitator Gear ratio 20:1 L , Input motor power 5 HP input RPM 1500

OD29525/2024-2025:Supply and installation worm Reduction gear box clarifier, Gear ratio 70:1 L , Input motor power 1 hp input RPM 1500

OD29526/2024-2025:Supply and installation of TEFC Squirrel Cage induction motor for Agitator,3.7KW/5HP, 1500 RPM suitable for Three Phase AC Supply.

OD29528/2024-2025:Supply and installation of TEFC Squirrel Cage induction motor for Clarifier,0.74KW/1HP, 1500 RPM suitable for Three Phase AC Supply.

Supply and installation of Floating aerator

OD29529/2024-2025:Supply and installation of 5 HP High speed Floating Aerator with accessories,Degree of Protection : IP55,Speed RPM : 1440,Operating Voltage : 415 V,Normal Frequency : 50 Hz Shaft material : SS 304, Air dissolving capacity :min 1.5 kg of oxygen per KW

Media Changing of Filters

OD29547/2024-2025:Media changing of pressure Sand filter,Refilling of new Media : Pebbles, Silex, Sand,Vessel size Dia 1.5M,Height 2M

OD29870/2024-2025:Media changing of Activated carbon filter Refilling of new media Media : Pebbles ,Silex ,Activated Carbon Vessel size Dia 1.5M,Height 2M

OD29871/2024-2025:Changing of strainer inside filter tank. Strainer : 3” MS pipe with 6 mm hole.

OD29872/2024-2025:Supply and fixing of butterfly valve Size : 2.5 “

OD29875/2024-2025:Flange End Water Flow Meter 50mm Class B

OD31738/2024-2025:Supply and Fixing of HDPE chlorine dosing tank 100 Liters. Installation and testing of Hypochlorite dosing system works include tubing and conducting trial run and testing including all cost of labor, conveyance, incidental charges etc complete.

Control panel and Automation

Bar screen and covers

OD30117/2024-2025:Fabrication, Supply, erection, and assembling in correct position and alignment by welding SS bar screen in 304L Grade size 2M x 1.8 M. as per approved specifications, drawings and direction of dept. Officer at site including cost of labour, machinery for planing, welding, shearing, grinding etc. All leads and lifts, conveyance, incidental and handling charges etc. complete

OD31175/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

OD31202/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges

OD34926/2024-2025:Supply of MS rod having diameter 5mm including cost of conveyance

OD31177/2024-2025:Fabrication and erection of motor cover and tank cover including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete.

Rework of Fixed aerator and clarifier

OD29887/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC, Pipe etc including cost of conveyance charges.

OD29957/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges

OD29910/2024-2025:Repairing cone scrapper and arm and overhauling thrust bearing including cost of all materials, labour, incidental charges, hire charges etc complete

OD29914/2024-2025:Dismantling fixed aerator mixer arm and shaft cleaning and servicing of shaft blades including welding cracks at blade joints etc complete

Painting of filter tanks and other allied materials

OD29927/2024-2025:Painting all the exposed surfaces with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

SAI ENGINEERING (BID ID -2222741)

GREEN METHOD ENGINEERING PVT. LTD (BID ID -2222633)

Bidder Name

GREEN METHOD ENGINEERING PVT. LTD

SAI ENGINEERING

P V Moosa Engineering Contractor