Interior/Furnishing Work, Conference Hall, Electrical Work, Landscaping and Road/ Parking Work Of Office Building Of Bhadbhut Barrage Project, Bharuch

Name of Work: Interior/Furnishing Work, Conference Hall, Electrical Work, Landscaping and Road/ Parking Work Of Office Building Of

Bhadbhut Barrage Project, Bharuch

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

FULL HEIGHT PARTLY GLAZED PARTITION UP TO FALSE CEILLING:- Providing & Fixing

Laminate Finish partly glazed partition up to false ceiling ht (thickness of partition is

mm) having 12 mm thick commercial plywood both side on Powder coated Aluminium

framing. Powder coated Aluminum framing size for vertical & horizontal support is 50 mm

x 50 mm, edge vertical support 120 mm x 50 mm. Grid of Aluminum framing is 600 mm x

600 mm. All exposed surfaces finished with 1 mm thick laminate of approved shade. Make

necessary grooves as per shown in drawing. Necessary framing to be erected above false

ceiling (up to beam and slab height.) No extra cost to be paid for the same. Before

installation, make hole/face plate for conduit pipes of electrical/ networking cables with

openable stud from partition Including all materials and labour etc. For glazing using of

mm thick glass with Powder coated Aluminum framing size for vertical & horizontal

support is 120 mm x 50 mm with proper crystal edges & with suggested frosted films as

given pattern on glass or reflective glass as decided by EIC. All joints are covered with

Burma teak bidding Patti finished with laminate/polish as per actual site finish. Complete

with all necessary hardwares & adhesives as per details given in drawing and as per

instructions of Architect /Engineer In charge. Contractor has to provide all necessary cut

outs (race ways) for Electrical works & no extra payment shall be made for it.

FULL HEIGHT FLUSH PARTITION UP TO FALSE CEILLING (LAMINATE FINISH) : Providing

& fixing flush partition up to false ceiling ht (thickness of partition is 76 mm) having 12 mm

thick commercial plywood both side on Aluminum framing. Powder coated Aluminum

framing size for vertical & horizontal support is 50 mm x 50 mm. All exposed surfaces

finished with 1 mm thick laminate of approved shade without any air gap and grooving as

per design. Necessary framing to be erected above false ceiling. No extra cost to be paid

2 for the same. Before installation, make hole/ face plate for conduit pipes of electrical/ 669.23 SM 2589.90

networking cables with open able stud from partition Including all materials and labour

etc. Make necessary grooves/suggested colour laminates as per shown in drawing. All

bottom ends are covered with Burma teak bidding Patti finished with laminate Complete

with all necessary hardware & adhesives as per details given in drawing and as per

instructions of Architect/ consultant/ Engineer In charge. Contractor has to provide all

necessary cut outs (race ways) for Electrical works no extra payment shall be made for it.

ACAUSTIC WALL PANELING: Providing Material & Labour charges for making acaustic

wall panelling with 12 mm various shed acaustic panel & fluted acaustic panel having

powder coated aluminium grid framing of size 600 mm x600 mm by aluminium pipes of

size 50 mmx50 mm. Glass wool of 50 mm filled in alu grid framing to create sound

insulation effect. & covered with 12 mm thk MDF plywood. top surface covering by

suggested shed acaustic sheet in suggested pattern panelling to create suggested

groove of 4 mm deep and indicated nieces as suggested. All grooves and nieces are

3 finished with laminate. All exposed surfaces covered with Acaustic panel/ fabric of 88.79 SM 3454.72

approved shade as instructed by Architect/Engineer In charge. Complete with all

hardwares like nails, ss screws, adhesives etc.shown in detail drawings. Contractor has to

provided all necessary cut outs for Electrical works & no extra payment shall be made for

it. Please see the Attached Make List for Apporoved Makes. Amount (Rs) shall be paid only

for the Partition between the False Ceiling & Flooring.

Glass wool slab: Providing and Fixing in position 50mm thick glass wool in slab form of

density 48 KG/CM Rock wool/Twiga make or any other approved make behind

wall/ceiling/between partition panelling as shown in the drawings and manufacture

specification. The Installation shall be as per following steps: 1. Fix framework / Batten out

backside of wall panelling to suit width of insulation slabs 2. Fix expanded metal

galvanized chicken mesh or agro net before the insulation on battens as a key for

rendering, fixing it into vertical batten with staples or flat head nails. 3. Insulation slabs

3… shall be fixed snugly between battens without gaps. 4. Before fixing the ply/ wall panelling,

the entire surface shall then be covered with black fiberglass tissue as a vapour barrier.

The joints of the vapour barrier shall be sealed with self-adhesive Aluminum tape. 5. Fixing

shall be done on vertical batten with staples or flat head nails or adhesive solution. Ply/

panelling item shall be paid as per tender item. Item shall be operated, measured and paid

if and only not mentioned in relevant tender item.

ACAUSTIC FLUSH PARTITION UP TO FALSE CEILLING:- Providing Material & Labour

charges for making Acoustic partition having powder coated aluminium grid framing of

size 600 mm x600 mm by aluminium pipes of size 50 mmx50 mm. Glass wool of 50 mm

filled in aluminium grid framing to create sound insulation effect & covered with 12 mm

thick MDF plywood both side. Finish with suggested PU paint on MDF (thickness of

4 partition is 76 mm) having 12 mm thick MDF sheet both side on Aluminum framing. 52.89 SM 2981.42

Aluminum framing size for vertical & horizontal support is 50 mm x 50 mm. Grid of

Aluminum framing is 600 mm x 600 mm. All exposed surfaces finish with suggested paint.

Make necessary grooves as per shown in drawing. Necessary

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

framing to be erected above false ceiling (up to beam and slab height.) No extra cost to be

paid for the same. Before installation, make hole/face plate for conduit pipes of electrical /

networking cables with open able stud from partition Including all materials and labour

etc. All joints are covered with Burma teak bidding Patti finished with laminate/polish as

4.. per actual site finish. Complete with all necessary hardwares & adhesives as per details

given in drawing and as per instructions of Architect/Engineer In charge. Contractor has to

provide all necessary cut outs (race ways) for Electrical works & no extra payment shall be

Glass wool slab: Providing and Fixing in position 50mm thick glass wool in slab form of

density 48 KG/CM Rock wool/Twiga make or any other approved make behind

wall/ceiling/between partition panelling as shown in the drawings and manufacture

specification. The installation shall be as per following steps. 1. Fix framework / Batten out

backside of wall panelling to suit width of insulation slabs 2. Fix expanded metal

galvanized chicken mesh or agro net before the insulation on battens as a key for

4.. rendering, fixing it into vertical batten with staples or flat head nails. 3. Insulation slabs

shall be fixed snugly between battens without gaps 4. Before fixing the ply/ wall panelling,

the entire surface shall then be covered with black fiberglass tissue as a vapour barrier.

The joints of the vapour barrier shall be sealed with self-adhesive Aluminum tape. 5. Fixing

shall be done on vertical batten with staples or flat head nails or adhesive solution.

Ply/panelling item shall be paid as per tender item. Item shall be operated, measured and

paid if and only not mentioned in relevant tender item.

GYPSUM CEILLING: Providing and fixing single layer water proof gypsum board 12.5 mm

thick sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by

GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x

mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm

5 at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges 4671.90 SM 606.95

& drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as directed

ALUMINIUM CHANNEL PROFILE LED LETTER: Providing & Installation of Aluminium

Channel profile led letter Material & structure Front: Acrylic (3mm imported cast acrylic, UV

resistant) side: Aluminium channel profile (powder-coated / painted as per design) Back:

ACP / Aluminium sheet with waterproof sealing LED Module : High-quality waterproof LED

6 modules with 1 years onsite warranty Color options: White / Warm White / Red / Blue / 522.00 INCH 191.90

Green Branded SMPS power supply (waterproof) clean installation Energy efficient (low

power consumption) with 1 years onsite warranty Wall-mounted, frame-mounted, or

hanging option On-site professional installation with strong fixings. Scaffolding rate is

include in the Item. No extra payment shall be made for it.

Acrylic Sandwich Letters (10mm+3mm); Providing & Installation Acrylic Sandwich Letters

(10mm+3mm) Wall Mounted with Screws:Sandwich Design: 10mm acrylic base + 3mm

7 acrylic top (total thickness 13mm) CNC laser cut for sharp edges and precision finish 348.00 INCH 111.10

Scaffolding rate is include in the Item. No extra payment shall be made for it.

CEMENT SHEET CEILLING: The works include supply installation and fixing of Cement

Sheet Ceiling which in-corporates a fully concealed GI fixing grid. Complete with all

necessary hardware, fittings, Luster paint and accessories. The job also includes

providing access panels, cutting of spot lights, etc. The steel stud frame consisting of

8 main furring GI channel at every 600 mm and cross channel at every 600 mm. Both main 376.58 SM 1045.91

and cross channels are attached though jaw clip. Screws will be corrosion proof either

Chromised or Cynated. Contractor has to provided all necessary cut outs for Electrical

works & no extra payment shall be made for it.

S.S GLASS RAILING FOR BALCONY: Providing & Fixing on floor glass supporting

systems high tensile aluminium S.S champagne finish -Transline 20RH ,On glass profile

9 variations S.S champagne finish with accessiories -TRA-PR-6539 ,with 12mm clear 36.57 RM 4141.00

toughened straight glass & glass hight up to 2'feet.etc complete ,selection as directed by

Providing and fixing pipe railing as per detailed drawing including with anchoring 0.075m

in RCC or masonry including 50mm dia. SS pipe 18 gauge @ 1.40 kg./m as hand rail, and

16mm dia. SS pipe 18 gauge @ 0.45 kg./m as side mounting member including welding,

grinding, fixing in position with necessary fixtures and fastenings (base SS cap 50mm dia.

hole, SS pipe cap 16mm) and polishing etc complete., as directed by architect /E.I.C.

CORIAN TOP MDF FINISH (MDF CNC CUTTING) CONFERENCE TABLE: Providing & fixing

corian top veneer finish conference table 750 mm height, 600 mm wide & 21.0mt running

length (longitunal side) meeting table having 6 mm Thick. Corean Top based on 19+19 mm

thick MR Grade plywood finished by rubbing, buffing & pasting (Core an top covers

mm bottom of table at longitunal side & 100 mm bottom of table at shorter side including

edges) table have base of 19+19 mm thick plywood and 19mm for footrest & supporting

sandwitch 36 mm vertical supports made by of 18mm+18 mm thick sandwiched Ply

including grooving as indicated in drawing. (As per details given in sectional drawing)

11 Base of the table covered by burmateak bidding Patti finished with pu polish. Use of 18 21.00 RM 20328.46

mm MDF fluted panel finish with PU as suggested pattern along with back lit. All external

surfaces covered by 4mm thick veneer, complete with PU spray polish. At Elevation from

internal side and for exposed side fixing of MDF fluted panel fixing as per given pattern.

All complete with given no of Cable Manager as per shown in detail drawings & as per

instructions of architect/consultant /in charge engineer. Contractor has to provide all

necessary cut outs for Electrical works & no extra payment shall be made for it.

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Projector unit with Corian Top Vineer Finish Side Credenza. (2.4 x 0.45)SM: Providing

Material & Labour charge for making Screen projector unit of 5.2mx2.85m size having

Aluminium grid framing of size 600 mm x600 mm by powder coated aluminium pipes of

size 50 mm x 50 mm and MDF ply of 12 mm ply with all exposed surface 1 mm laminate

finish, Corian Top Veneer Finish back credenza having height of 750 mm, with Corian top

having 36 mm Thick ply, width is 450 mm (which covers sides, edges & 100 mm bottom of

ply, front edge1.5") commercial Plywood with all necessary proper solution, finished with

rubbing and buffing having vertical sandwich supports for shutters & horizontal single

self as per given in detail drawings drawers made out of 19mm Thick Plywood. Backside

of credenza is covered with 12 mm thick waterproof plywood. Credenza have suggested

12 NO of drawers and shutters. All exposed and internal Joints complete with Burma teak 1.00 NO 50820.10

bidding Patti (25 mm x 12 mm) finished with melamine polish. All exposed and internal

Joints complete with Burma teak bidding Patti (25 mm x 12 mm) finished with melamine

polish. All exposed surfaces covered with 4 mm veneer and finished with PU polish and

internal surfaces covered with 1 mm thick approved shade laminates as instructed by

Architect/Engineer In charge. Complete as per detail Drawings, with all hardwares like MS

nails, SS-304 screws, magnet, Stoppers, L - hinges, table chain, 4" mat finish SS handles,

Cable manager (Table cable hole cap), etc.

Panasonic / CKS Acoustics 86'' Interactive Display: Supply, Installation, Testing and

Commissioning of 86" Interactive touch Should have Edge-Type LED Display,2H Screen

Treatment,Should 3840 x 2160 mm Ultra HD Resolution,Glass Should Anti Glared (AG),

4mm Tempered type,Should B:38| T:38 | L/R:38 mm Bezel width,creen size Should be

218.44 cm ,Aspect Ratio Should 16:9, Brightness Should 400 cd/m², Effective display Area

Should be 1907 x 1076 mm,Horizontal & Vertical Viewing Angle Should 178º, Should have

VGA input,Four HDMI2.0 & Two USB2.0 Video Input terminals, HDMI2.0 Video output

terminal, L/R audio Input, headphone Audio Output ,RS232 Serial Input, Ethernet (RJ45)&

Service(RJ12) Terminals, Should Support USB 2.0 Connectivity,Should support HID, TUIO,

Flash Connectivity,Touch Sensitivity Should Any touch with finger, gloved hand or pointer

Supported, Should Support Infrared Technology,Should Support Windows®7, Windows ®

8, Windows®10,Vista, XP, Mac® OS, Linux, Android Applications,Reporting

Rate & Frame Rate Should be Up to 450 fps,Should Support HID Compatibility,Should

Have Feature like USB-Autoplay, Auto-switch on Failover, Control button lock, HDMI Wake-

Up & Mechanical Features like IR Touch, Remote, IR Extender Support, Rocker Switch,

Detachable power cable, Carrying slots, Detachable logo positioning, Internal usb cover,

13.. Cable Holder.Should support OPS Compliance-Android/ Windows,Should have 2X12 W

Built-in Speaker, Power Requirements Should110 VAC - 240 VAC,Power consumption

Should 280 W. Approved Make : Panasonic / Planar / Trueview

OPS for Interactive Display:Supply, Testing and Commissioning of OPS.Approved Make :

Wall Bracket for 86'' Display:-Supply, Testing and Commissioning of Wall Bracket for

inch Video Wall. Approved Make : Standard

Panasonic 43'' Display for Chairman:Supply, Installation, Testing and Commissioning of

43" 4K professional digital display Should 3840 x 2160 Ultra HD Resolution, Screen Size

should be 108 cm diagonal, Aspect Ratio Should be 16:9, Horizontal & Vertical Viewing

Angle Should 178 º, Pixel Pitch Should be 0.2451H X 0.2451V mm, Display Colour Should

be 1.07 Billion,Should have one RF Input Terminal,one DVI Input Terminal,one AV Input

16 Terminal,two USB2.0 Inputs,three HDMI2.0 Input terminals,one Headphone Output 1.00 NO 41031.25

terminal, SPDIF Output,one RJ-45 ConnectionTerminals,Should Support PNG/BMP/JPEG

Picture Formate, H.265/ H.264/SPDIF Output,one RJ-45 Connection Terminals, Should

Support PNG/BMP/JPEG Picture Formate,

H.265 / H.264 / H.263 / MPEG1 / MPEG2 /MPEG4 Video Formate, SPDIF SPDIF Output,one

RJ-45 Connection Terminals,Should Support PNG/BMP/JPEG Picture Formate, H.265 /

H.264 / H.263 / MPEG1 / MPEG2 /MPEG4 Video Formate, MPEG1/2/MPEG4/AC3/EAC3/AAC/

MP3/WMA /FLAC Audio Formate.Should have 20W(10+10) Built-In Speaker, Should have

Features such as CEC,Hotel Mode,Sound Out,Dolby Audio/Dolby MS12,Bluetooth,

16.. 802.11a/b/g/n 2.4 G 2T2R WiFi.CPU Should be Cortex-A55 x4,1.1 GHz Processor,GPU

Should be Triple core Mali470 600 Mhz,Should Support Android 'P'- 9.0 OS Version, should

have 2GB RAM & 16GB Memory, Power Supply should be 110 V-240 Vat 50/60 Hz,Power

Consumption should be 95W. Approved Make: Panasonic /Planar/ Trueview

17 Providing & Fixing Floor Stand for 43'' Display along with all hardwares:- 1.00 NO 4279.37

Supply, Installation, Testing and Comissioning of USB PTZ Full HD 1080p@30fps Video

Conferencing Camera, 1/2.8" CMOS 2.16 MP sensor, 62 degree FOV, 10X Optical Zoom

with Enhanced PTZ, PAN ± 90 degree, Tilt (+) 90 degree and (-) 30 degree, H.264/MPEG

18 Video compression, Auto/Manual Focus, USB 2.0 Interface Plug & Play, BIS, CE,FCC, 1.00 NO 52036.21

RoHS certified [Approved by Competent Authority i.e. not Below the rank of Executive

Supply, Testing and Commissioning of Pop UP Box should provide an extremely simple,

affordable and elegant single-push pop-up multi-connection solution. By pressing down

19 gently on the lid, the unit opens and closes pneumatically, fast and easy to install and 5.00 NO 14122.83

flexible to configure, should have HDMI, Audio, Power, CAT6 inputs. Approved Make :

Kramer / Rampo / Wyrestorm

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Supply, Testing and Commissioning of HDMI Extender Set with Bidirectional IR with EQ

and EDID management should have point to point extension of HDMI over UTP supporting

1080p@60hz/24bit video and audio up to 40m/131ft along a single Cat5e/6 cable, should

support all high definition resolutions like 1080p, 1080i, 720p with screen refresh rates of

24Hz, 30Hz, 50Hz and 60Hz, should transmits discrete wide-band bidirectional IR control

signal together within the HDMI signal over UTP, includes wide-band and dual-band IR

Receivers for improved IR performance, extensive EDID management on Transmitter and

EQ management on Receiver for improved communication between connected devices

20 and transmission over cable distances, low profile chassis of 17mm / 0.67” for easier, NO

more convenient installations behind screens at display zones, full 3D compatibility,

extenders cascadable up to 7 times within a single output zone, 24bit True Color, cable

termination follows IEEE-568B standards, HDCP compliant, should be with additional

power via phoenix connection, LED indication for visual confirmation of power supply to

units and signal status to show established connection between connected devices.

Approved Make: Kramer / Rampo / Wyrestorm Model No.: EX-40G3 or latest model

Supply, Testing and commissioning of 2 Meter HDMI Cable for display. 4K UHD and HD

compatible, 99.999% oxygen free copper conductors, Flexible, durable foil-insulated

housing material increases ease of installation and product life Exceptional high speed

21 performance for 4K UHD and HD 1080p displays with 3D, Perfect opaque plug end as well 19.00 NO 1882.64

as excellent conductivity and protection against oxidation, Kink protection and strain relief

to protect conductor. Approved Make : Purelink / Kramer / Wyrestorm

Wyrestorm 4 x 4 HDMI Matrix Switcher:Supply, Testing and Commissioning of

Presentation Digital Scaler/ Switcher Should HDTV Compatible,HDCP Compliant, Should

have 10 HDMI Video Inputs & 2 computer graphics video on 15–pin HD connectors,2 HDMI

Scaled Outputs,22 Output Resolutions Up to WUXGA/1080p,2 Microphone Inputs, Auto

Input Scanning and Switching Features, Companion AFV (Audio–Follow –Video) Stereo

audio for every input,Should have 12 unbalanced stereo on terminal blocks & embedded

audio for HDMI inputs, each with individual level controls, & 1 S/PDIF on an RCA

connector, 1 balanced stereo audio on a terminal block, embedded audio on the HDMI

22 outputs, Should have Multiple Aspect Ratio Selections such as Full, overscan, underscan, 1.00 NO 136350.00

letterbox & panscan should have Built–in ProcAmp for Color, hue, sharpness, noise,

contrast & brightness.Should Supports 4:4:4 (RGB and YUV) as well as 4:4:2 (YUV) color

sampling, Should have Built–in Web Pages,Should have Non–Volatile Memory, Should

have Flexible Control Options such as Front panel, IR remote with OSD (on–screen

display), Ethernet with built–in Web pages & RS–232,Power Supply should be 100–240V

AC. Approved Make : Kramer / Rampo / Wyrestorm

1 x 4 HDMI Splitter: Supply, Testing and Commissioning 1 x 4 HDMI Splitter Model No.

UHD-104, specification : Input/ Output: 1 HDMI 2.0 input-4 HDMI 2.0 output (mirroring/

splitting), Maximum resolution 7 refresh rate: Up to 4K @ 60 Hz with HDMI 2.0, HDR

HDMI/HDCP version: UHD-104 support HDMI 2.0, HDCP 2.2, EDID Management/ Downs-

23 caling: UHD 104, Audio support: Higher models support lossless audio formats UHD 104 1.00 NO 14122.83

LPCM, Dolby AC-3, DTS, 3D are supported, Power/ Build/Enclosure: all have metal (or

metal shell) enclosure to help heat dissipation, UHD-104 uses a 5V/1A adapter Physical &

other specs: ESD protection. Approved Make OREI UHD-104/ J-tech Digital/ Kinivo

Providing & erecting, programming, testing of chairman unit microphone with flexible

stem of 480 mm in length and light ring built in loud speaker ,two head phone socket

,attractive design ,priority button for chairman microphone,built in volume control for head

24 phones,chime tone facility to precede chairman priority calls,microphone on/off button,red 1.00 NO 5992.33

indicates for microphone is active,frequency response -400Hz to 10kHz,nominal acoustic

input -85 dB SPL [[Approved by Competent Authority i.e. not Below the rank of Executive

Providing & erecting, programming, testing of Delegate unit microphone with flexible stem

of 480 mm in length and light ring built in loud speaker ,two head phone socket ,attractive

design ,built in volume control for head phones,chime tone facility to precede chairman

25 priority calls,microphone on/off button,red indicates for microphone is active,frequency 12.00 NO 5565.10

response -400Hz to 10kHz,nominal acoustic input -85 dB SPL [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

CKS Acoustics Conference Control Unit:Supply, Installation, Testing and Commissioning

of Central Control Unit should have adapting digital technology and embeded high

performance CPU. It should be with high effect circuit that ensure the anti-interference

function. System should be with USB recording in WAV format, 4 channels input, each

channel supports 30 units. VIP units can be preset, Multi system can be connected.

Systemshould can be set by main controller or via computer by USB. It includes modes

26 like FIFO, LIFO,FREE, C-ONLY etc. System also should set Time off, auto off and voice 1.00 NO 68089.15

control. It should be with 20Hz-20kHz Frequency response, greater than 96dBA S/N ratio,

less than 0.05% T.H.D, USB Recording connector, DIN-8 x4 Input connector, DIN-8 x2

Extension connector, RS-232 x1 Central controller connector, USB x1 Computer

connecting, RCA x2 &6.3mm x1 Audio input, RCA x2, 6.3mm x1, XLR x1 Audio

output.Model No.: CKC-550E

CKS Acoustics 8 core Conference Cable: Supply, Installation, Testing and Commissioning

of 8 core shilded Conference Cable

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Soundcard:Supply, Installation, Testing and Commissioning of 2 x 2 USB interface for

recording Microphones and Instruments having 48kHz resolution for professional audio

quality, Compatible with Popular Recording Software, Streams 2 inputs / 2 outputs with

ultra law latency to your PC, Analog Inserts for use of external effects such as

28 compressors etc.., Zero latency direct monitoring while recording, Input / Playback mix 1.00 NO 22253.33

control and sterero / mono switch for direct monitoring, Mini Desktop Foam Factor, USB

Audio Interface, +48 V Phantom Power, Inputs : 1 x Mic/line, 1 x instrument, Outputs: 2 x

RCA, 1 x Phone.

Supplying and erecting wall/ceilling mount speaker with rated power of 30 watt/power

tapping 30/15/7.5 watt available,opening angle 180 degree H * 77 degree V ,sound pressure

29 level 88 dB ,frequency response of 70Hz to 20KHz [[Approved by Competent Authority i.e. 10.00 NO 2569.44

not Below the rank of Executive Engineer ]

CKS Acoustics Power Amplifier:-Supply, Installation, Testing and Commissioning of Audio

power Amplifier with FM , Mp3 Player, Through USB, SD & MMC, CARD READER WITH

REMOTE CONTROL. It should have 240W Power Output, 100V & 4Ohms-8 Ohms-16 Ohms

Speaker Outputs, 1 x Line 1V/50,6 x Mic. 1mV/4.70k 2xAux.100mV/470k Input. It should

have 50Hz-15kHz Frequency Response. Approved Make : LD System/ CKS Acoustics /

Quest Model No.: CKB-501

1.5 Sq.mm Speaker Cable: Supply, Cabling and Commissioning of 1.5 Sq.mm 16 AWG,

Speaker Cable. Approved Make : CKS Acoustics / Draka / Beldon

0.5 Sqmm Microphone Cable: Supply, Cabling and Commissioning of 2 core shielded

32 Sq.mm Microphone bulk cable. Approved Make:CKS Acoustics / Draka / Beldon 200.00 MTR 89.89

Supplying & erecting approved make LAN cable of following size in existing pipe as per

System Rack - 30U:Supply, Testing and Commissioning of system rack should be with

x 800 mm size height 30U with 2 cooling fan, 2 power strip, multi print, front glass door,

side ventilation with appropriate hardware for mounting, one tray, two L Bracket set.

Approved Make : Elixir / Valrack / APW President

Connectors & Accessories:Supply, Testing and Commissioning of Connectors and

Accessories,XLR Male,XLR Female etc.. Approved Make : Standard

Supplying & erecting approved make LAN cable of following size in existing pipe as per

direction [C] CAT -

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm dia

Supply & installation of surface mounted U PVC snap-on adaptable trunking raceways,

fabricated out of U-PVC to Off-White or approved shade as per IS 733 of thickness 2.0mm

Providing & and sideseight

Erecting with module

all accessories

floorremovable covers,

box/flushed jointssurface

with table ,height Conform to

39 IEC 60670-1, IEC 60670-23 & IEC 60884-1 with required items as demanded by engineer in 10.00 Ea 1544.29

charge with complete finishing .cat-III

40 Providing and erecting Decorative call bell Ting-tong box type 250 volts complete erected 3.00 Ea 71.71

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) -

flush / surface mounted double door (IP54) fitted with copper insulated busbar, isolated

neutral bar, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for

250 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The

providing be erecting

and used of same company

Miniature ofbreaker

circuit MCB to single

pole 6Away outgoing

to 25A suitable to operate

42 on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 100.00 Ea 112.11

confirming to IS 8828/1996 with ISI Mark Cat.III (10 Amp SP MCB)

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate

43 on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 100.00 Ea 112.11

confirming to IS 8828/1996 with ISI Mark Cat.III (16 Amp SP MCB)

Providing & erecting 240 V MCB double pole switch for motor & inductive load(C Curve)

44 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following 22.00 Ea 330.27

capacity.(B) 40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

45 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c) 30.00 Ea 737.30

63 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

46 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 8.00 Ea 668.62

(b) 40 Amp. Cat.III

Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for

47 operation on 3 phase and neutral 415V. having characteristic of quick action & tripping 7.00 Ea 3040.10

with all advance feature & do not incorporate any electronic component for following Max.

rating erected as directed. (iii) 63 Amps. FP

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

48 cover.(approved make OEM has to submit test certificate) & having back filling compound 19.00 Ea 5760.03

of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted. (b)For Electrical installation up to 11 KV in

normal soil. Length of Pipe : 2.00 RMrs Back filling Compound :1 no. Bag of 25 Kg.

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

49 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 40.00 KG 794.87

providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at 415 V having Normal current rating 400A.

50 with variable Thermal & magnetic release suitable to work on A.C. supply 50 c/s. With all 1.00 Ea 25228.79

internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU

Supplying & erecting approved make Four Pole 415V change over switch interior for panel

51 mounting with operating mechanism A.C.23 duty confirming to IS for (D)200A Cat III 1.00 Ea 12241.20

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

53 insulated armoured cable complete with out going tails, insulating tape etc for following 2.00 Ea 190.89

size of cables.(F) 3 & 1/2 core 150 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (H) 150 Sq.mm.

Providing and erecting Inverter based approved make split air-conditioning unit consisting

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with necessary core cutting. (1)For 3 Star

Rating of current year (B) for 1.5 ton capacity

Providing and erecting Inverter based approved make split air-conditioning unit consisting

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately erected evaporating unit and

56 blower motor with its accessories by means of extra supplied proper insulated copper 4.00 Ea. 56353.96

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with necessary core cutting. (1)For 3 Star

Rating of current year (B) for 2 ton capacity- Premium cat.

Providing and erecting Inverter based approved make Cassette type split air-conditioning

unit consisting of condensing unit with fan motor, hermetically sealed scroll/rotary

compressor with accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by Eco friendly Green gas charging & Internal copper

wiring & Remote control ( 3 star and above of current year) with necessary core cutting. (b)

for 2 ton capacity

Providing and erecting Inverter based approved make Cassette type split air-conditioning

unit consisting of condensing unit with fan motor, hermetically sealed scroll/rotary

compressor with accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by Eco friendly Green gas charging & Internal copper

wiring & Remote control ( 3 star and above of current year) with necessary core cutting. (a)

for 1.5 ton capacity

Supplying and erecting insulated pair of soft copper tubing including power and control

59 cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity 75.00 Mtr 965.56

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s

400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete

with guard, flexible Core plug top complete erected with lead wires as directed. Cat.II

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having

61 3blades with aluminium blades with , canopy & 30 cm. down rod erected with 101.00 Ea 1948.29

earthing.(Make shall be approved by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

62 erected duly painted for fan complete with proper insulation without leakage and earthing. 101.00 Mtr 108.07

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up

63 to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 116.00 Ea 108.07

complete erected concealed in Ceiling with necessary finishing.

64 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 116.00 Ea. 18.18

Supplying & erecting approved make low noise decorative exhaust fan having square

65 frame ABS body with inbuilt lowers & square frame.200mm with 1350RPM cat ii 42.00 Ea 1703.87

Providing recess in wall or window frame suitable for erection of Exhaust fan complete

with plastering and colour washing to match the colour of the wall or window complete

66 with expanded metal in order to render the fitting in accessible and the room water-proof. 42.00 Ea 189.88

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt LED driver efficiency > 85 %

67 CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux or equivalent make LED 78.00 Ea 295.93

used for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Tube Light with integral driver (iii) 18-

20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name 120 to 300 V,Power Factor

more than 0.9, THD < 10 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

68 ,LED efficiency-110 lumens/watt LED driver efficiency > 85 % CREE / OSRAM / PHILIPS 67.00 Ea 165.64

Lumileds / NICHIA / SEOUL/Bridgelux or equivalent make LED used for luminaire. ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver (i) 5-10 Watts, Surge-2 KV,

IP-20, conventional 1 to 2 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED efficiency 110 lumens/watt. LED driver

69 efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux or 801.00 Ea 220.18

equivalent make LED used for luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (C) Square/ Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (a) 8 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED efficiency 110 lumens/watt. LED driver

70 efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux or 97.00 Ea 589.84

equivalent make LED used for luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (C) Square/ Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (C) 20 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED efficiency 110 lumens/watt. LED driver

71 efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux or 138.00 Mtr 135.34

equivalent make LED used for luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (E ) LED Strip Light (a) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with non

integral suitable Driver complete Cat-lll

Providing and erecting decorative wall bracket fittings complete with LED lamp and rust

free fittings components mounted in chrome finish housing with holder ,clear/opaque

glass diffuser complete erected with lead wires with minimum 15 wattage capacity as per

instruction engineer incharge/architect/authority .cat-III

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

73 Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- 19.00 Ea 7266.95

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.It should withstand 48 hours for 440VAC

line supply (iv) above 100 watts Cat-lll

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated

indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary supporting angles, flats including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears, BUSBARS, with suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-

74 base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber 4.00 SM 16392.30

gasket complete. The Panel shall be painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The

panel shall be supplied with following approved manufacturers with following size (C) The

standard companies switch gear shall be used and only manufacturers as per IEC

for beneficial use. (i) with 350mm depth board

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles, flats, bars, channels, sections complete with

75 cutting, welding, grinding & finishing duly painted with one coat of red oxide with 60.00 KG 77.77

erection on site as per direction of engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

providing and erecting Approved make Three Phase & Neutral LT Heavy Duty Switch

Disconnector Fuse Unit Cubical type for panel mounting complete with operating

76 mechanism suitable to operate on 415V A.C. , 23A duty With HRC fuses of suitable load 3.00 Ea 8141.61

confirming to IS. 13947 (Part I & III). of following capacities. (e) 250 Amp Cat.III

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for

77 phase sequence of following current carrying capacity, erected with necessary bus bar 3.00 Mtr 3202.71

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.(B) Suitable for 200 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for

78 phase sequence of following current carrying capacity, erected with necessary bus bar 1.00 Mtr 7319.47

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.(D) Suitable for 400 Amp. Capacity

Supplying and erecting approved make panel mounting type Digital Voltmeter having

79 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all 4.00 Ea 1275.63

connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having

digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary connections.

Supplying and erecting approved make suitable panel indicator lamps of LED type lamp,

lens cover, Bakelite holder complete erected with necessary connections.

Providing & erecting approved make AMF control panel suitable for following size of

phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains &

generator) Overload relay for generator contactor Neutral contactor for mains and

generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor

Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for

auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start

83 push button. frequency meter. Engine hour meter. Two earthing studs.3) Protection 1 Ea 97320.57

module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder

head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.The

AMF Panel of following capacity

AMF Control Panel for 50/62.5 KVA 3 phase DG Set

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by

15˚C within a hour, The water cooler should be comprising of hermetically sealed

84 compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, 5.00 Ea. 55893.40

thermostats, relay etc.complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder

coated pedestal frame, prefilter housing carbon filter suitable buster DC pump, auto low &

high pressure switches with following size of LPH capacity & erected as directed with one

year comprehensive maintenance guarantee.[D] 100 LPH with 3 phase Raw water pump of

500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi or equivalent), Dual media filter 10"x54" -

85 (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - 5.00 Ea. 77891.20

(1No - Shimge /CRI /Lubi or equivalent), RO Membrane housing with RO membrane of

40*40 - (1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with

Recovery Rate 50%.

(A)LED Bollard fittings of minimum height 400 mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with

base plate 160x160mm with erection by M8x75mm fastner with required RCC

foundation.IP65 for 9watt ,surge-4kv cat-III

Providing and erecting street light pole bracket comprising main B Class MS pipe of

cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of 1 RMr. length with suitable rise as

per site condition & suitable welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single Arm bracket 1 RMt

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail

88 for mounting mob & hinged doors as per requirement having locking arrangements with 18.00 Ea 476.72

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. ( c)150mm x 125mm x 100mm [deep]

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 120 to 300 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA /

89 SEOUL/ BridgeLux (U.S.A.) or equivalent make LED used for luminaire. ( fittings required 18.00 Ea 2201.80

LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and 10 kv non

integral ,Light must have 440VAC line supply protection. It should withstand 48 hours for

440VAC line supply. (iii) above 24 to 36 watts Cat-lll (REQUIRE-25 WATT) cat iii

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

90 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing 300.00 Mtr 140.39

trench / pipe of following size of cables (c) 4 core 10 Sq. Mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

91 marked copper wires of following size to be erected as directed. e) 1.50 Sq.mm 3 core 300.00 Mtr 46.46

round PVC sheathed

Supplying submersible pump set suitable for bore of 100 mm. dia. or more having three

phase motor capacity not more than 3 H.P. of different range with following capacity (B)

(15 stage) 130 LPM discharge at 50 RMrs. Respectively head suitable for 50 mm dia.

delivery pipe Cat.III

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible

93 copper cable approved make of following Size. (c) 3 Core x 4 Sq. Mm 100.00 Mtr 146.45

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A.

range, directly operated thermal overload relay in sheet steel enclosure for 3phase 415V.50

c/s. A.C. motor up to 7.5 H.P.complete erected on P.W. Block with necessary connection.

Supplying & erecting Digital / PCM / TDM EPABX System having SRM design, system with

flexible universal slots, Inbuilt Auto attendant facility, Minimum 15 Nos. conference,

Analog extension line, Calling GSM, E&M line, PRI / E1 & VOIP program me through

Analog telephone digital key from Ethernet, public address cord, shall have unrestricted

simultaneous dialling facility, QSIG protocol on PRI, 95 / STD / ISD / Local- Locking ,Class

of Service, Quick Dial- Single Digit dialling of any two external numbers, Once only ring

device, Boss/Secretary- Do not Disturb Facility, Power Down Mode, Hot Line, Hot Outward

Dialling, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call

transfer while Ringing. With Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF,CLI

Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most

Calculation(ASMDR), DID Direct Inverse Dialling, External Music Input, Fax Homing,

Global Directory Printing. with following capacities. [C] No of Extension 48, No of

Junctions 9, 8 Port IP Resource in-built, 4 Port Web base Video Conferencing, No of

expandable ports : 128, Operators Console - 01 Compatible : ISDN

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation

for the pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x

cm (or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in

approved manner. (for 4 & 6 mtr pole)

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Supplying and erecting approved make Conical Pole (Standard ) Made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759 with required base plate and integral Junction box consist of terminal plate

of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud

97 type terminal and arrangement for cable terminationas erected on suitable foundation 18.00 Ea 6403.40

(included) with necessary nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below. (C) 5 Mtr Long 65mm Top

X140 mm bottom dia, 3mm thickness.

Supplying and erecting, commissioning and testing diesel generating set having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally

enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not

less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with

standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty

fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners, screw drivers, feeder

gauge, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12/24

98 volts electric starting equipment complete with standard battery, dynamo, cut-outs, 1.00 Ea 675844.53

ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type

exhaust silencer and vertical hot air duct both logged with asbestos rope, save oil trays,

exhaust piping of required length, standard wall/floor mounted fuel with level indicator

and piping and drip proof alternator, self excited, self regulated, screen protected, with

excitation system, capable of delivering the rated system output at 415 volts, 3 phase,

4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of

rated voltage from no load to full load. Both the engine and alternator fitted on a common

fabricated steel base plate with antivibration mounting engine and alternator both

connected to each other by flexible flange coupling and with floor/wall mounted control

panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of

98.. adequate capacity, indicator lamps duly wired with HRC fuses. The alternator & control

panel shall be connected with provided suitable capacity armoured cable and complete

with Acoustic enclosure (canopy) made out of 18 SWG CRCA Sheet, sound absorbing

material Rockwool of 64 density & 100 mm thick

conforming to IS:8183 The resin bonded rockwool covered from inside the canopy by

perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of

mtr, as per PVCT norms. Erection, commissioning and satisfactory testing as per

98.. requirement with first filling of fuel, oil, etc. with guarantee of complete system for One

year. & with obtaining all necessary certificate from Electrical Inspector. The Capacity and

Ratings of DG sets are as below continuous Rating of 62.5 KVA, BHP not less than 76 BHP

Providing, laying and jointing in true line nand level 25 mm dia. UPVC Pipe (SCh-40) for

cold water including fittings make prince/ SUPREME/ASTRAl/FINOLEX or equivalent as

approved by SIC. Pipe shall be fixed on the wall with the help of clamp at every 2 m c/c or

shall be concealed as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adesive sovent, includung cost of all materials

Providing, laying and jointing in true line nand level 50 mm dia. UPVC Pipe (SCh-40) for

cold water including fittings make prince/ SUPREME/ASTRAl/FINOLEX or equivalent as

approved by SIC. Pipe shall be fixed on the wall with the help of clamp at every 2 m c/c or

shall be concealed as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adesive sovent, includung cost of all materials

Provinding and fixing gun metal check or non return full way WHEEL VALVE 40 mm dia.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (ii) 20mm dia.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal

daimeters.(ii) 450mm dia.

Providing and laying precast cement concrete tiles 20mm thick with aggregate of sizes

upto 6mm laid on floors, treads of steps and landing on 20mm thick bed of cement mortar

104 1:6 (1-cement : 6-coarse sand) or L.M. 1:1.5 (1) Lime putty : 1.5 - coarse sand) jointed with 132.00 SM 494.73

neat cement slurry with pigment to match the shade of tiles complete with precast tiles of

(C) Dark shades using ordinary cement

Providing and laying Precast RCC Jali 25 mm thick as drain cover etc. Complete as

selection and directed by Architect / EIC.

Providing & Plantation of semi carpet Lawn (Selection 1) the scope includes prepaid

ground for planting of lawn, soil spreading, mixing of soil & manures, rolling the same etc

comp. Labour cost for Lawn Plantation semi carpet Lawn Cost including carting, loading &

106 unloading at site etc and includes required dose of pesticides & Ant termite treatment 708.78 SM 212.10

Labour charges for maintenance of semi carpet Lawn including tools & tackles. including

Providing, mixing & spreading fertilizer Manure, 1 year maintenance etc complete as

directed by architect /E.I.C

Item Description of Item (with brief Rate in

Quantity Unit Amount

No. specification and reference to book of specifications) Figures

Providing & Plantation of Shrubs (mini 3 feet height) by digging of pit size 1x1x1 feet,

adding soil, farm yard manure, DAP, Pesticide, Plantation of sapling. Making proper tree

107 basin & putting proper support including Providing, mixing & spreading fertilizer Manure 100.00 NO 151.50

,1 year maintenance etc complete as directed by architect /E.I.C

Providing & Plantation of Green belt trees by digging of pit size 2x2x2 feet, height 10 feet

adding soil, farm yard manure, DAP, pesticide, plantation of sapling. Making proper tree

108 basin & putting proper support including back filling the trench, watering etc including 100.00 NO 858.50

Providing, mixing & spreading fertilizer Manure etc complete as directed by architect

Artificial grass : Providing and fixing 50 mm premium artificial grass made with 100% fresh

yarn having lush green colour, density 15000, two layer black backing, Dtex 7700, pile

height 40mm, including necessary fiting, labour,lead, transportation, etc. Complete as

selection and directed by Architect / EIC.

Excavation for foundation in dence or Hard soil upto 1.5 m. depth including sorting out

110 and stacking of useful materials and disposing of the excavated stuff upto 50 meter Lead 172.57 CM 149.67

as directed by Engineer in charge.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

111 including watering, ramming and consolidating etc. complete. (upto 10 ton) 2199.30 CM 289.06

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level

Providing and laying cement concrete 1:1.5:3 (1-Cement: 1.5-coarse sand: 3-graded stone

113 aggregates 20 mm nominal size) and curing complete including cost of formwork, 77.56 CM 4070.58

Dewatering etc.

Providing and laying cement concrete 1:2:4(1-Cement :2-coarse sand: 4-graded stone

114 aggregates 20 mm nominal size) and curing complete including cost of formwork, 10.94 CM 3481.28

Dewatering etc. (In Foundation & plinth)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as

115 per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for 2418.82 SM 685.42

levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of read lead paint & two coat oil paint. (A)In beams

and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to common rafters, including all

vertical supports and all other neccessary requirements as directed by Engineer in

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with

118 hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete 298.20 SM 1441.90

as directed by Engineer in charge.

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level

Providing and fixing M.S. grating of required pattern to RCC drain as function of cattle

guard, drain etc. with M.S. I-section beam of 75mmX150mm at required spacings with

120 welding including priming coat and two coats of Painting Complete as selection and 756.00 Kg 106.30

directed by Architect / EIC.

Providing and fixing galvanised Mild steel tube Heavy Grade 100 mm dia including cutting,

121 welding, jointing priming coat and two coats of Painting etc.Complete as selection and 97.50 RM 837.97

directed by Architect / EIC.

I/We am/are willing to carry out the work at… ...................... % above/below percent (Should be written in figures and words) of the estimated

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words