Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹46.7 L
EMD Value
₹47,000
Closing Date
23 Nov 2026, 6:00 pmDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Godhra
Construction of New Atalwadi at village Katol, Ta :- Kalol, Dist:- Panchmahal
364966
25 of 2026-27
Open
Civil - All
Works
Panchmahal
7 documents required · 7 mandatory
₹1,500
Executive Engineer, Panchayat (R&B) Division, Godhra
₹47,000
10 Nov 2026
10 Nov 2026
10 Nov 2026
23 Nov 2026
10 Nov 2026
120 days
BILL OF QUANTITIES (SCHEDULE-B)
Memorandum showing items of works to be carried out
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
1 Excavation for foundation upto 1.5 m depth including 151.96 Cu.mt 261.70
sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(B)
Dense or Hard soil
2 Excavation for foundation for depth from 1.5 m to 3.0 m 47.96 Cu.mt 185.19
including sorting out and stacking of useful materials
and disposing off the excavated stuff upto 50 Meter
lead.(B) Dense or Hard soil
3 Providing and laying cement concrete work 1:2:4 (1- 13.96 Cu.mt 4099.59
Cement : 2- Coarse sand : 4- graded stone aggregates
mm nominal size) and curing complete excluding cost of
formwork and reinforcement for reinforced concrete work in
(A) Foundations, footings, Base or columns and Mass
4 Provinding and laying controlled cement concrete M -250 44.18 Cu.mt 4447.06
and finishing smooth with curing etc complete, including the
cost of formwork but excluding the cost of reinforcement
for R.C.C. work in(A) Foundations, footings, Base of
Columns and Mass concrete.
5 Providing and laying controlled c.c. M.250 & curing 7.83 Cu.mt 7568.94
complete including the cost of form work but excluding the
cost of reinforcement for reinforced concrete work in
Collumns, pillars, posts & struts upto floor two level for G.F.
(For Column Up to PL)
6 Providing and laying controlled cement concrete M.250 and 21.00 Cu.mt 5746.90
curing complete including the cost of formwork but
excluding the cost of reinforcement for reinforced concrete
work in (C) Slabs, landing, shelves, Balconies, Lintels,
Beams, Girders and Cantilever upto floor two level.(For
7 Filling available excavated earth (excluding rock) in 121.28 Cu.mt 130.39
trenches. plinth, sides of foundations etc. in layers not
exceeding 20 cm. in depth consolidating each
disposited layer by ramming and watering.
8 Filling in foundation and plinth with murrum or selected soil 21.68 Cu.mt 273.96
in layers of 20cm. thickness including watering, ramming
and consolidating etc. complete.
9 Filling in plinth with sand under floors including watering 2.72 Cu.mt 460.19
ramming, consolidating and dressing complete
DTP 07 Atalwadi katol Kalol
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
10 Anti-Termite System : Providing and laying of permanent 54.30 Sq.mt 134.33
piping technology anti-termite treatment before flooring
work by installing LLDP(Low linear density polyethylene)
tube of 8mm O.D. & 6.4mm 1.D. within built pressure
compensation chip every 30cm interval in the tube, having
working pressure of 2Kg/cm2 and release rate of
Itr/hour fixed by P-clips and nails. The LLDP pipe shall be
installed at theen tire periphery of the building and atinternal
network of building at a depth of 20 to 200mm under floor at
every 2 to 3 mtr. c/c distance (adjusted as per building
layout) & Ends of loop pass through a PVC elbow of
minimum 32mm ID at junction box of wall and floor
level,entering into a steel reinforced grooved flexible pipe
ofminimum 22mm ID leading into junction box and the
loopsshall terminate injunction boxes & test every
junctionduring injecting chemicals for termite control
treatment.The anti termite chemical Imidacloprid 30.5% SC
mix as perIS-6313(partIII) shall be injected by the pressure
pumpdiluted with [email protected]/5ltr of water at the rate of
2Kg/sq.cm@5Ltr/SMT.The contractor shall submitapproved
line plan for piping system and junction boxesdully
approved by Engineer-in-Charge with bond of
yearwarranty.(II)Anti Termite chemical injected area
injecting incl. labour cost
11 Providing and laying damp proof course 25mm thick 8.58 Sq.mt 306.64
cement concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone
aggregate 10 mm nominal size) and curing complete
12 Brick work using common burnt clay building bricks having 6.59 Cu.mt 4021.02
crushing strength not less than 35 kg./Sq.Cm. in foundation
and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine
sand)(B) Conventional
13 Brick work using Common burnt clay building bricks 19.52 Cu.mt 4289.33
having crushing strength not less than 35 kg/sq.cm in Super
Structure above plinth level and up to floor Two Level in
cement mortar 1:6 ( 1 cement : 6 fine sand ) GF (B)
14 Providing and laying Controlled cement concrete M200 and 1.96 Cu.mt 7088.18
curing etc. complete including the cost of form work but
excluding the cost of reinforcement. (C) Slabs Landings
shelves Balconies ,Lintel -chhaja ,beams ,girders and
cantilever up floor to level (For Lintel)
15 Providing and laying controlled c.c.M.150 & curing complete 51.75 Cu.mt 4272.30
including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in
Slabs,landing,cantilevers upto floor two level for G.F. slab
16 Providing and laying controlled c.c. M.200 & curing 2.84 Cu.mt 7523.49
complete including the cost of form work but excluding the
cost of reinforcement for reinforced concrete work in
Collumns, pillars, posts & struts upto floor two level for FF
17 Providing and laying controlled Cement Concrete M.200 & 4.31 Cu.mt 6216.55
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Beam upto floor two level for G.F.
DTP 07 Atalwadi katol Kalol
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
18 Providing and laying controlled Cement Concrete M.200 & 6.79 Cu.mt 6309.47
curing complete including the cost of formwork but
excluding the cost of reinforcement for reinforced concrete
work in Slabs,landing,cantilevers upto floor two level (For
Slab) for G.F. slab
19 Providing and laying controlled Cement Concrete M.200 & 5.43 Cu.mt 4612.67
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Slabs,landing,cantilevers upto floor two level for
20 Providing TMT Bar FE 500D reinforcement for R.C.C. work 12214.10 Kg 76.21
including bending, binding and placing in position complete
upto floor two level
21 Providing and fixing M.S. Fan clamps type 1 to 16mm dia 10.00 Nos 132.20
M.S. bar bent to shape with hooked ends to R.C.C. slabs
curing, laying including painting the exposed portion of
loops, all as per standard design complete.
22 Providing & fixing 40 mm thick Single shutter flush door 3.15 Sq.mt 7342.70
solid core finished with both side 1 mm thick lamination
both side like 'NOVAPAN 'or equivalent, of natural wood
grain shade as approved by this office having telephone
black granite 18 mm thick frame with double stone as per
the instruction of Engineer in charge.with necessary SS
hinges and fixtures etc . complete.
23 Providing corrugated G.I. sheet of class-3 roofing fixed 553.90 Sq.mt 727.13
withglavanished iron J or L Hooks, Bolts and nuts 8mm
diameterwith bitumen and G.I. limpet washer or G.I. limpet
washer.filled with white lead complete excluding the cost
ofpurlins, Rafters and Trusses.(1) 0.80 mm thick sheet.
24 Providing and fixing window having extruded aluminum 2.88 Sq.mt 3199.68
colour anodized section frame main outer size 95mm x
24mm x 1.17mm (of Jindal section no.2459 @ Wt.
Kg/mt), horizontal three track member size 92mm x
31.75mm x 1.30mm (of Jindal section no. 8688, @ Wt.
Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm
(of Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding
shutters of horizontal member size 40mm x 18mm x
1.29mm (of Jindal Section No. 8947 @ Wt. of 0.456 Kg/mt),
vertical member of size 40mm x 18mm x 1.29 mm (of
Jindal section no: 8949 @ Wt. of 0.456 kg / mt) with 5 mm
th transparent bronze colour tinted float glass with powder
coated aluminum fittings and fixtures and transparent
silicon sealant glass fixing Including Granite Frame as per
25 Providing and fixing Louverd type ventilators with powder 0.72 Sq.mt 13732.97
coated aluminum fittings and fixtures and Blur glass fixing
to Adjustable louverds and black granite frame as per
details and executed as per directed by Engineer Incharge.
DTP 07 Atalwadi katol Kalol
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
26 Steel work, welded in built up sections framed work 225.00 Quint. 6595.16
including cutting, hoisting, fixing in position and applying a
priming coat of red lead paint. (A)In beams and joists,
channels angles Tees, flats, with connecting plates or angle
cleats as in main and cross beams. Hip and jack rafters,
purlins conneted to common rafters and the like
27 Providing and fixing M.S. grills of required pattern to 281.19 KG 143.42
wooden/ Marble/ Granite/ Stone frames of windows etc.
with M.S. flats at required spacings and frame alround,
square or round bars with round headed bolts and nuts or
by screws (A) Ornamentle Grill.
28 Providing and laying Vitrified tiles 8 to 10 mm thick , 24''x 34.61 Sq.mt 1073.13
24'' in flooring treads of steps and landing laid on abed of
12mm thick cement mortar 1:3 (1-cement :3-coarse sand )
finishing with flush pointing in white cement.
29 Providing and layingMarbo Grenite tiles 8 to 10 mm thick , 21.86 Sq.mt 1141.45
24'' x 24'' in skrting risers of steps and dedo on 10mm thick
cement plaster 1:3 (1-cement : 3-coarse sand) and jointed
with white cement slurry
30 Providing and laying polished Kota stone slab flooring over 425.34 Sq.mt 976.72
20mm (Average) thick base of cement mortar 1:6 (1-
cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -
coarse sand) laid over and jointed with grey cement slurry
mixed with pigment to match the shade of slab including
rubbing and polishing etc. complete. (A) 25mm thick.
31 Providing and laying 18 mm thick machine cut ,free edges 4.04 Sq.mt 3325.93
,machine polished Black Granite tread and risers in single
piece with 1 cm nosing and necessary grooves on treads
32 Providing and laying BBCC of 75mm th. Layer in CM (1:3) 8.92 Sq.mt 679.73
including sparaying two coat of water proofing chemical with
selected brand by enginner incharge .i.e.perma or other
with leveling complete for ready base of china mosaic
33 Providing and laying broken china mosaic flooring 45.46 Sq.mt 747.29
for terrace using 12 mm to 20 mm broken pieces of glazed
tiles to be laid over cement mortar 1:3 to plain or slope and
to be tempered to bring mortar creme out upto surface
using white cement including rounding off junctions and
extending them upto 15 cm along the wall,clearing with
water and oxalic acid etc. as directed.
34 Providing cement vata (10cm. x 10 cm. size) quarter round 25.34 Rmt 23.68
in cement mortar 1:1 including neat cement finishing,
watering etc. complete.
35 Providing 15mm thick cement plaster in single coat on 50.90 Sq.mt 167.03
Rough (Similar)side of single or half brick walls for interior
plastering upto floor two level and finished even and smooth
in (ii) Cement mortar 1:4 (1-cement :4-sand) (Interior
36 Providing 15mm thick cement plaster on ceilings and sofits 74.39 Sq.mt 191.85
of stairs upto floor two level instead of plastering on walls.
and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)
(ceiling Plaster)
DTP 07 Atalwadi katol Kalol
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
37 20mm thick sand faced cement plaster on walls upto height 57.00 Sq.mt 337.34
10 metres above ground level consisting of 12mm thick
backing coat of C.M. 1:3 (1-cement : 3-sand)With Chiken
mesh and 8mm thick finishing coat of C.M. 1:1 (1-cement :
1-sand) etc. complete.
38 Providing throating or plaster drip and moulding to R.C.C. 8.60 Rmt. 41.00
39 Providing and laying cement concrete 1:3:6 (1- Cement : 3- 1.99 Cu.mt 3925.77
Coarse sand : 6- crushed stone aggregates 20 mm nominal
size) and curing complete including cost of formwork in (A)
Wall Caps / Coping
40 Applying two coats of putty & two coats of primer of 50.90 Sq.mt 40.59
approved brand and manufacture on new wall surface to
give an even shade including thoroughly brushing the
surface free from mortar dropping and other foreign matter
and sand papered smooth.( For Interior wall)
41 Applying two coats of acrylic lappy (putty) and two coats of 74.39 Sq.mt 42.67
primer of approved brand and manufacture on new wall
surface to give an even shade including thoroughly brushing
the surface free from mortar dropping and other foreign
matter and sand papered smooth. For ceiling
42 Wall painting (two coats) with plastic emulsion paint of 50.90 Sq.mt 78.90
approved brand and manufacture on undecorated wall
surface to give an even shade including throughly brushing
the surface free from mortar droppings and other foreign
matter and sand papered smooth.(For interior Wall)
43 Wall painting two coats with plastic emulsion paint of 74.39 Sq.mt 80.98
approved brand and manufacture on wall surfaces to give
an even shade including throughly brushing the surface free
from mortar droppings and other foreign matter and sand
papered smooth on ceiling.
44 Finishing wall with weather proof exterior emulsionpaint on 57.00 Sq.mt 114.53
wall surface (two coats) to give an requiredshape even
shade after thoroughly brushing the surfaceto remove all
dirt, and remains of loose powdered materials.etc complete
(Exterior Wall Paint)
45 Providing laying and jointing in true line and level 40mm dia. 15.00 Rmt 148.12
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings
make PRINCE /SUPREME/ ASTRAL / FINOLEX or
equivalent as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two
metre C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent, including cost of
46 Providing laying and jointing in true line and level 32mm dia. 20.00 Rmt 119.15
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
DTP 07 Atalwadi katol Kalol
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
47 Providing laying and jointing in true line and level 15mm dia. 30.00 Rmt 72.65
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
48 Providing and fixing concealed center point to wall ceiling & 15.00 Rmt 653.77
floor CPVC (SDR 13.5) PIPE having National
SanitationFoundation (NSF) seal for potable water of
following dia. nominal bore tube fittings and clamps
including making goodthe wall, ceiling and floor
etc.complete. [F] 50mm.
49 Providing and fixing concealed center point to wall ceiling & 20.00 Rmt 249.72
floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making
good the wall, ceiling and floor etc. complete. [C] 25 mm.
50 Providing, laying and jointing in true line and level 110 21.00 Rmt 835.15
diametre U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm
length x 145 mm heigh at every 2000 mm center to center
or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
51 Providing and fixing screw down bib taps of following 17.00 Nos 214.81
size.(B) Brass chromium plated screws down Bib Tap.
52 Providing and fixing pillar tap, capstan head, screw down 2.00 Nos 354.69
high pressure with screws, shanks and back nuts. (ii)
53 Providing and fixing chromium plated brass half trun flush 2.00 Nos 263.77
cock of approved quality including fixing in pipe line etc.
complete.(ii) 25mm dia.
54 Providing and fixing Gun metal check or non-return fullway 2.00 Nos 663.43
wheel valve.(E) 40mm dia.
55 Providing and fixing Gun metal check or non-return fullway 2.00 Nos 420.63
wheel valve.(C) 25mm dia.
56 Providing and fixing C.P. brass towel rail comlete with C.P. 3.00 Nos 603.19
brass brackets fixed to wooden plugs with C.P. brass
scews.(B) 600mm x 20mm size.
57 Providing and laying wash down water closet ( european 2.00 Nos 10261.60
type WallHung WC pan ) Florentine series FLS-WHT
0111B including providing and fixing metropole Flush cock
seat cover, jet wash etc complete unit of jaquar Branch ( or
equvalant ) including installing and fitting as per
manufacturers standards by skilled trained plumber
including testing etc complete quality and brand as
approved by Engineer in charge.
DTP 07 Atalwadi katol Kalol
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
58 Providing and laying (two level or slopes ) and jointing with 7.00 Rmt 305.13
stiff mixture of cement mortar in proportion 1:1 salt glazed
stone ware pipes following nominal internal diametre
including testing of pipes and joints etc complete. 150 mm
59 Providing, laying and jointing in true line and level 160 10.00 Rmt 831.22
diametre U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 160 mm diametre x 210 mm
length x 196 mm heigh at every 2000 mm center to center
or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
60 Providing and fixing PVC SWR Nahni trap IS 14735 for 4.00 Nos 558.36
drain - 100 mm diameter with jali of the following nominal
diameter of self cleansing design with C.I scread down or
hinged grating including the cost of cutting and making
good the walls.
61 Fixing foundation bolts of required sizes as per approved 133.92 Kg 54.71
drawing, design and direction.(24 dia. X 350 MM) @ WT
OF 1240 GM OF EACH
62 Providing sock pit of 5.00 Cu.M. Volume including 2.00 Nos 3163.49
excavating and filling brickbats with dry masonry work at top
for 45cm. height including covering the top with stone
including providing vatas in C.M. 1:3 with finishing curing
etc. complete as directed.
63 Providing erecting and fixing double coated ISI water tank 4500.00 Litre 3.95
of required capacity each with all necessary fittings and
connection etc. complete on terrace
64 Providing and fixing ball cock of approved. quality as 3.00 Nos 132.89
directed.(A) Copper Metal (i) 25mm dia.
65 Filling in foundation and plinth with brick Bats Chhara in 7.78 Cu.mt 600.56
layers of 20cm. thickness including watering, remming and
consolidating etc. complete.
66 Clearing and grubbing road land including uprooting rank 0.05 Ha. 80243.80
vegetation grass bushes,shrubs,sapling and trees girth up
to 300 mm removal of stumps of trees cut earlier and
disposal of unserviceable materials(A) By manual means in
area of light jungle
67 Non Shrink Grouting (GP2)Cement base Non shrink 0.00 Cu.mt 55550.00
grouting material for pocket of foundation bolts & under
base plate.Application with shuttering and deshuttering.
68 Painting two coats (including priming coat) on new steel and 531.54 Sq.mt 129.36
other metal surface with enamel paint, brushing, interior to
give an even shade including cleaning the surface an even
shade including cleanicn the surface of all dirt, dust and
other foreign matter.
Rupees Forty Six Lakh(s) Seventy Two Thousand Forty Four Only
DTP 07 Atalwadi katol Kalol
Item No. Description of Item Quantity Unit Rates in Total Amount
Item No. Description of Item Quantity Unit Rates in Total Amount
I / we, am / are willing to carry out the works at______ % Above / below percent (should
be written in figure and words) of the estimate rates mentioned above.
Amount of my /our tender works out as under.
Estimated amount put to tender: Estimated amount put to tender:
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate mentioned
in all the tender.
Quantity, rates & wording of items are as per estimates and calculation in the
schedule " B " are arithmetically checked and found correct.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
Panchayat (R&B) Sub Division Panchayat (R&B) Division
DTP 07 Atalwadi katol Kalol
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
02 All GR in one_For Non BT Work.pdf
Performance Bond and Bitumen date 4-5-26.pdf
2.SBD_07 Atalwadi katol Kalol.pdf
04 07 Atalwadi katol Kalol.pdf
07 Atalwadi katol Kalol.pdf
BOQ 07 Atalwadi katol Kalol.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .