Repair and renovation of old HT cable from MRS to NC substation and relocate the existing laid HT and LT cablefrom west substation to wet mixing substation.

Amount

Excavating in trench not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation etc, or for shafts, wells, cesspits, manholes, pier holes etc. getting out in Hard/dense soil as directed by the site-incharge.

Returning, filling in including spreading, leveling in layers not exceeding 25 cms, Hard/dense soil.

Supply and sand filling under floors (Trench) or in foundations including watering and consolidation .

Demolition of cement concrete (un reinforced) in ground floor and paving not exceeding 15 cms thick. (below or above ground level).

Supply and providing of Cement concrete in sub floors, sub-bases, floors and pavings, etc, Type B-0, 1:2:4(12.5mm graded aggregate 25mm thick.

S & L of un-reinforced pre-cast concrete cable cover, Type 2, flat, size 300X180X40mm, to be laid length equal to the width of the trench, as directed by site in-charge.

Supply and laying or fixing or passing through pipe &Trench PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core, cross-sectional area 300 sq. mm as directed by site-in-charge.

S & L of steel tube medium grade ISI marked, GI with all fittings laid for cable protection bore of tube 100mm, as directed by site-in-charge.

Shifting, Removing and laying or fixing or passing through pipe &trench, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts earthed, grade cross sectional area 150 sqmm. Cable laying termination with lugs,nuts and washers and fixing with proper size gland to be done as per IS and as directed by site In charge. (Cable will be provided by CFA)

Shifting and laying or fixing or passing through pipe &trench, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sq. mm.Cable laying termination with lugs,nuts and washers and fixing with proper size gland to be done as per IS and as directed by site Incharge. (Cable will be provided by CFA)

11 KV* 150 sqmm XLPE HT cable 2 Run cable passing through pipe &Trench Removing, coiling, and Shifting to cable yard inside factory as directed by site In charge

Supply and Fixing of cable route indicator marked as "HT UG CABLE" cast iron moulded

Supply and Fixing of cable route indicator marked as "LT UG CABLE" cast iron moulded

ARUNAI POWER INFRA PRIVATE LIMITED (BID ID -747232)

JK ENGINEERS (BID ID -752746)

Bidder Name

JK ENGINEERS