Strengthening and widening of Ladpur-Alawalpur-Subhashgarh motor road in constituency Jwalapur Distt. Haridwar under State Sector (CM Ghosna 823/2012).

Amount

Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.including supply of all material, labour and T&P etc. required for proper completion of the work.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal With all lead and lift dressing of sides and bottom and backfilling in trenches with excavated suitable material. including supply of all material, labour and T&P etc. required for proper completion of the work.

Construction of embankment with approved material obtained from borrow pits with all lead and lift, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 including supply of all material, labour and T&P etc. required for proper completion of the work.

Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.

Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.Using naturally occuring gravel including supply of all material, labour and T&P etc. required for proper completion of the work.

Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 including supply of all material, labour and T&P etc. required for proper completion of the work.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 P.C.C. grade M 20 Nominal mix (1:2:4) including supply of all material, labour and T&P etc. required for proper completion of the work.

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405. including supply of all material, labour and T&P etc. required for proper completion of the work.

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405. including supply of all material, labour and T&P etc. required for proper completion of the work.

Tack coat using VG-10 grade bitumen Over granular surfaces treated with primer @ 0.40 kg/sqm including supply of all material, labour and T&P etc. required for proper completion of the work.

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type B as per Technical Specification Clause 508. Bitumen (VG-30) Case - II By Mechanical Means including supply of all material, labour and T&P etc. required for proper completion of the work.

Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as perTechnical Specification Clause 510 Case - II : Type B Bitumen (VG-30) including supply of all material, labour and T&P etc. required for proper completion of the work.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with all lead and lift as per Technical Specification Clause 303.1. including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and Laying of Interlocking Concrete Block Pavements of M-40 Grade having thickness 80 mm as per drawings and Technical Specification Clause 1504. 3cm thick Bed layer including supply of all material, labour and T&P etc. required for proper completion of the work.

Construction of K.C. type drain as per drawing including supply of all material, labour, T&P etc. required for proper completion of the work.

Supplying and installation of delineators (road way indicators,hazard each markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings

Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on RCC Posts 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 including supply of all material, labour and T&P etc. required for proper completion of the work.

Semi Reflective Traffic Signs Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm , 600 mm below ground level as per approved drawing Clause 1701.2.2 including supply of all material, labour and T&P etc. required for proper completion of the work.

900 mm equilateral triangle

600 mm circular

800 mm x 600 mm rectangular

600 mm x 450 mm rectangular

900 mm side octagon

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing,etc as per drawing and Technical Specification Clause 1703 including supply of all material, labour and T&P etc. required for proper completion of the work.

5th Kilometre Stone (precast)

Ordinary Kilometer Stone (Precast)

200 m stone (precast)

Culvert 1.50 M SPAN (18 No.) Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal With all lead and lift dressing of sides and bottom and backfilling in trenches with excavated suitable material. including supply of all material, labour and T&P etc. required for proper completion of the work.

Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 including supply of all material, labour and T&P etc. required for proper completion of the work.

Brick Masonry Work in cement mortar in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 1109 Brick Masonry in 1:4 cement mortar including supply of all material, labour and T&P etc. required for proper completion of the work.

Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4 including supply of all material, labour and T&P etc. required for proper completion of the work.

Plastering with Cement Mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 R.C.C grade M 20 including supply of all material, labour and T&P etc. required for proper completion of the work.

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 including supply of all material, labour and T&P etc. required for proper completion of the work.

Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 P.C.C. grade M 20 Nominal mix (1:2:4) including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 including supply of all material, labour and T&P etc. required for proper completion of the work.

P.C.C. M 15 ordinary grade levelling course below approach slab complete as per drawing and technical specifications Clauses 800 and 1211 Nominal mix (1:2.5:5) including supply of all material, labour and T&P etc. required for proper completion of the work.

Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211 including supply of all material, labour and T&P etc. required for proper completion of the work.

Culvert 2.50 M SPAN (8 No.) Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal With all lead and lift dressing of sides and bottom and backfilling in trenches with excavated suitable material. including supply of all material, labour and T&P etc. required for proper completion of the work.

Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 including supply of all material, labour and T&P etc. required for proper completion of the work.

Brick Masonry Work in cement mortar in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 1109 Brick Masonry in 1:4 cement mortar including supply of all material, labour and T&P etc. required for proper completion of the work.

Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4 including supply of all material, labour and T&P etc. required for proper completion of the work.

Plastering with Cement Mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 R.C.C grade M 20 including supply of all material, labour and T&P etc. required for proper completion of the work.

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 including supply of all material, labour and T&P etc. required for proper completion of the work.

Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 P.C.C. grade M 20 Nominal mix (1:2:4) including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 including supply of all material, labour and T&P etc. required for proper completion of the work.

P.C.C. M 15 ordinary grade levelling course below approach slab complete as per drawing and technical specifications Clauses 800 and 1211 Nominal mix (1:2.5:5) including supply of all material, labour and T&P etc. required for proper completion of the work.

Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211 including supply of all material, labour and T&P etc. required for proper completion of the work.

Box Culvert Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal With all lead and lift dressing of sides and bottom and backfilling in trenches with excavated suitable material. including supply of all material, labour and T&P etc. required for proper completion of the work.

Dewatering from foundation of abutments and wing walls (with pump capacity 4000 lit per Hr.) including wages of operator and fuel including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 including supply of all material, labour and T&P etc. required for proper completion of the work.

P.C.C. M 15 ordinary grade levelling course below approach slab complete as per drawing and technical specifications Clauses 800 and 1211 Nominal mix (1:2.5:5) including supply of all material, labour and T&P etc. required for proper completion of the work.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 R.C.C. grade M 25 including supply of all material, labour and T&P etc. required for proper completion of the work.

Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 including supply of all material, labour and T&P etc. required for proper completion of the work.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 R.C.C. grade M 25 including supply of all material, labour and T&P etc. required for proper completion of the work.

Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 R.C.C grade M 25 including supply of all material, labour and T&P etc. required for proper completion of the work.

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 including supply of all material, labour and T&P etc. required for proper completion of the work.

Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211 including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and technical specifications including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3

Drainage spouts complete as per drawing and technical specifications Clause 1209 including supply of all material, labour and T&P etc. required for proper completion of the work.

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing a nd technical specification Clauses 614, 709, 1204.3.7 including supply of all material, labour and T&P etc. required for proper completion of the work.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. including supply of all material, labour and T&P etc. required for proper completion of the work.

Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying curtain walls complete as per drawing and technical specification Clause 1304 including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix (1:2:4) including supply of all material, labour and T&P etc. required for proper completion of the work.

M/s Krishna Constructions