WD/2026-27/3T-1/178

Electrical detailed cost Estimate for Suit Room at International Guest House under KU

Supplying and fixing 160 A 415 V, TPN SFU with sheet steel enclouser on angle iron frame on wall with nuts bolts etc incl. S&F 3 nos DIN type HRC Fuse as per rating (Make: L&T as directed by EIC ) [For Main Incomer Ground Floor]

Supplying and fixing 415V, 100 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make: L&T as directed by EIC) (Ref:PWD Page No-D-3,Item No:4(a)) (One for GF Panel O/G other for FF Panel I/C)

Supply & fixing 415V 200 A capacity MS (16 SWG) Busbar Chamber having dimension of (500x150mm) to be fixed on iron frame on wall consisting of 4 nos copper bars of size (4x40x5mm). The same BBC should have a separate cubicle at one end consisting 3 nos 200 A capacity porcelain cut out fuse unit & one nutral bar to receive the service cable including connecting the cut out fuse units with the BBC by S/F PVC insulated copper wire duly socketed at both ends incl. earthing attachment & painting. [Ref:PWD Page No-D-13,Item 19(b)] (For Main Panel)

Supply & fixing double door 6 way Enclosure (8GB31572RC) Vertical TPNMCBDB (Siemens) with IP 42/43 protection SS enclosure on angle iron frame on wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire & nuetral link & provision of earthing attachment comprising of the following accessories (All make Siemens): a)125 A four pole MCCB of breaking capacity 25KA/ 35KA with adjustable thermal & fixed magnetic setting --- 01 no b) 63 A TP MCB /100 A TP MCB ----02 Nos c) 40 DP MCB --- 01 Nos c)6-32A SP MCB ---11 nos [Ref:PWD SOR :-Page No-D-8(Item No-10)Page No-D-6,(Item No-7) Page No-D-11(Item No-15)] (For First Floor)

Supply & fixing 4 way double door horizontal TPN MCB DB with SS enclosure ( Cat no.8GB32202RC04 )(Siemns) concealed in wall after cutting the wall & mending good the damages to original finish with earthing attachment comprising with the following. a) 63 A Four Pole MCB isolator (Siemens) b) 6 to 32 A range SP MCB. (Siemens) ---12 Nos. [Ref:PWD SOR :-Page No-D-6(Item No-7)Page No-D-5,(Item No-6)Page No-D-10(Item No-14) ]

Supply & fixing SPN MCB DB (2+8) Way (Make Siemens) with S.S. Enclosure (8GB32102RC10) and IP-42/43 protection concealed in wall after cutting wall & mending good the damages & earthing attachment comprising with the following: a) 40 A DP isolator - 1 No. (Siemens) b) 6 to 32 A range SP MCB - 8 Nos.(Siemens) [Ref:PWD SOR Page No-D-5(Item No-6)Page No-D-6,(Item No-7)Page No-D-10(Item No-13)]

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 19 mm dia 3mm thick Polythene Pipe

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 25 mm dia 3mm thick Polythene Pipe

Cutting Channel of sizes (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge as per office supply pipe sample 19 mm bore, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG including supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles for the following sizes Pipes - **a)19 mm dia 3 mm thick polythene pipe without earth continuity wire (For circuit drawing & Point wiring / as per requirement of Job / as per instruction of EIC) NB - All rubbishes should be removed from work site & also Tee & Elbow should not be use in the conceal pipe,continuity wire. [Ref:PWD SOR Page No : E - 3 Item No : 6(a)]