Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC GAIRKATA ROAD POST BINNAGURI PIN 735 203 DIST JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.9 L+₹1.3 L (3.19%)Rejected-Finance | L2 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 3 | L3₹41.7 L+₹2.1 L (5.42%)Rejected-Finance | L3 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 4 | L4₹42.3 L+₹2.7 L (6.92%)Rejected-Finance DURGA NAGAR CHECKPOST PO ETHELBARI DIST ALIPURDUAR PIN 735204 | ALIPURDUAR | WEST BENGAL | 735204 | L4 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 5 | L5₹42.6 L+₹3.0 L (7.57%)Rejected-Finance | L5 | Rejected-Finance OTHER THEN LOWEST BIDDER |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
CERTAIN PROVISION WORKS AS A PROVN OF PIQUET ROOM AT MIL FARM COMPLEX AT TELEPARA-1 (ENGR SQN AND SIG COY ILP) 20 MTN DOU, PROVN OF STORAGE ROOM AT TELEPARA-1 (ENGR SQN AND SIG COY ILP), PROVN OF 01 X VEH RAMP WITH WASHING POINT NEAR MT PARK OF 1831
2022_MES_563543_1
8538/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹74,000
Yes
24 Dec 2022
16 Nov 2022
17 Dec 2022
16 Nov 2022
15 Dec 2022
1 Dec 2022
Amount
Schedule 'A'
Surface excavation n.exc (not exceeding) 7.50 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.
M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed by Engr-in-Charge.
M&L for RCC M-25 ( Nominal Mix), (1:1.5:3), Type B1 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L for RCC M-25 ( Nominal Mix), (1:1.5:3), Type B1 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L RCC M-25 ( Nominal Mix), (1:1.5:3), Type B1 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L RCC M-25 ( Nominal Mix), (1:1.5:3), Type B1 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts
M&L TMT bars 16mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto as above but 6 to 8mm dia
M&F Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
M&L Formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
M&L Formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.
M&L for Formwork to flat fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings , shelf and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L for Flyash Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed by Engr-in-Charge.
M& L for Fly ash Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth complete all as specified and as directed.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and as directed.
Rendering 10mm thick with CM (1:3) on or concrete surfaces finished even and smooth as in ceiling complete all as specified and as directed by Engr-in-Charge.
M&L for preparing new plastered surfaces of wall with wall care putty and applying two coat of distemper oil emulsion over a coat of primer complete all as specified.
M&L for preparation new plaster surfaces of wall and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge.
M&L preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
Hardcore of gauge n exc. 63 mm, except material retreived from item 1 deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface
M&L silver sand filling under floors /cable protectionor in foundations including watering and consolidation complete all as specified and as directed by the Engr-in-charge.
M&L for cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in floor finished complete all as specified and as directed by Engr-in-Charge.
M&L for Damp proof course 25mm thick in horizontal or vertical surfaces in cement mortar 1:2:4 type B0 including necessary formwork
M&L for Ceramic tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified.
Ditto as in skirting
Supply & fixing of 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane
Supply & fixing of Galvanised steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all specified.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
M & L for in Pressed steel frames of 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified
S&F of 30mm thick 2nd class hard wood, plain, framed, panelled shutter (two panel) with panel of timber flat on both sides (feather edged), or of veneered particle board with comercial face veneers, supplied and fitted to chowkats all as specified and as directed.
S&F 35mm thick glazed skelton shutter open rebated and prepaid to receive glass gauze extra (without sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for secuering glass excecter size of members of shutter including bidding to frame as specified in SSR part-I, sec 8 clause 8.20(a) all as specified and directed.
M & L PCC (1:3:6) type C1 as in holdfast block, coping, bedblock etc.
S&F Stainless steel butt hinges medium weight 100mm long for PVC door.
S&F Aluminium anodized barrel tower bolts, extruded section 200mm long.
S&F Aluminium anodized handles, D type, 150mm long
Supply & fix as for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded all as directed by the Engr-in-Charge.
All as per item No 41 here-in-before but without glazing bars.
M&L for Framed work such as grills, framed guard bars,for window by welding it to existing window frame and similar work con- forming to Fe.290.Gde-E-165
M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone agg as in plinth protection complete all as specified and as directed.
S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specifed.
S&F of 4 mm thick Sheet glass frosted , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
M&L for two coat of synthetic enamel paint over a coat of yellow primer including preparation on newly steel surfaces of any description over 10 cm width or girth complete all as specified and as dircted.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, white complete all as specified and as directed by Engr-in-Charge.
S/F in 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed by Engr-in-Charge.
S&F Vitreous China wash basin Pedestal pattern, white, flat back size 580x450 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeincluding brackets, complete all as specified and as directed by Engr-in-Charge.
S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.
S&F 15 mm dial PVC connection 450 mm long, complete all as specified and as directed by Engr-in-Charge.
S&F waste coupling 32mm of PTMT (half of full threaded) complete all as specified and as directed by Engr-in-Charge.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.
S&F 15mm bore Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed (Make -Prayag/Marc/Essco/Jaquar).
S&F 15 mm bore Stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)
M&L for coloured Glazed ceramic tiles in vertical surface 450x 300x 5-6mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified.
M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including 15mm thick screed bed in cement mortor 1:6 complete all as specified
M&L for PVC Floot trap 75 mm outlet, plain with grating including joning with solvent cement complete all as specified and as directed by Engr-in-Charge.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
M&L for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
Ditto as above but in wall complete all as specified.
M&L for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
M&L for 110 mm bore PVC (SWR) vent cowl
M&L PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.
S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.
M & L screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as directed by the Engr-in-Charge.
Supply only intergral water proofing compound (WPC) of best quality
M& L for bituminous primer @ 0.50 KG/Sqm over the cement plaster incl preparation of surfaces as per manufacturers instruction complete all as specified and as directed by the Engr-in-Charge.
M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed by Engr in Charge.
M & L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed by Engr-in-Charge
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.
Removing excavated material exc 1.5 km n.exc 5 KM and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.
S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.
All as per item no 77 above but 20 mm bore pipe.
M&L for PCC for concrete bed to drain pipe , 200 mm bore pipe including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 using 40 mm graded stone aggreagate complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Brick work with subclass 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6)complete all as specified and directed.
M&L for 200 mm bore grade 'A' SGSW drain pipe laidin trenches and jointed in cement ,mortar (1:1) complete all as specified.
M&L for Cement concrete type B- 2,1:2:4 (40mm graded aggregate) as in concrete flooring ramp flooring with chequered finishing complete all as specified and as directed.
M&L for 100 mm thick cement concrete type B1, 1:1.5:3 (20mm graded aggregate) as in flooring of floor etc and finished complete all as specified and as directed.
M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
M&L for 100 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in base for interlocking etc for vehicle to move complete all as specified and as directed.
M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-40 Grade with grey cement and pigment as approved laid over and including 25 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed.
M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 /4.00sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of Size no less than 1.22 mm thick for boxes upto a size 200 x 300mm and above this not less than 1.63mm duly painted with aluminium inside and anticorrosive paint outside concealed in walls with 3mm thick bakelite/ plastic sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(c) One 3 pin socket out let 5/6 amps point on the same board controlled by one way switch 5/6 amps
(d) One 3 pin socket out let 5/6 amps point on the independent board controlled by one way switch 5/6 amps
All as per item 90 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed
S&F socket 2 in 1, 3 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
All as per Item No. 90 above but wiring with 4.0 Sqm single core copper conductor for one socket 15/16 Amps point on independent board complete all as specified and directed.
One socket 2in 1, 5 pin 5/15 amps multipurpose 230 volt flash type complete all as specified and directed
Switch pino flush type 15/16 amps single pole one way complete all as specified and directed
S&F of switch socket combination outlet 2 in 1, 3 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed by Engr-in-Charge.
S & F deluxe fan Electronic regulator AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S & F Wall mounted slim LED batten 20W, with extruded aluminium housing, with integrated LED driver complete all as specified and as directed.
S&F High Power LED street light fitting ,system wattage-35 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV built in surge protection device using 2.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed.
S&F street light bracket, made out of GI pipe medium grade) 25mm bore, 1.2 m long bend to shape and fixing/grouting with wall using 2 Nos 25 x 5 mm size MS FI clamps with bolts, nuts & washers complete including drilling as necessary and two coats of Aluminium paint over a coat of Red oxide primer all as specified & directed.
Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 8 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.
S&F MCB single pole & neutral 6 to 32 amp, 415 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole, 5 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F celing fan complte with blades down rods and accessories including provision of hook for hanging ceiling fan, 230V 1200mm sweep, BEE star rated with brushless direct current (BLDC) motor complete all as specified by Engr-in-Charge.
S&F exhaust fan of 300mm sweep A/C single phase 230/240 volts heavy duty complete with fan motor, blade, bracket and ring including grouting anchor bolts and making good to disturbed surfaces to match the existing complete including provision of PVC insulated & PVC sheathed round flexible cable of copper conductor,Three core of size 0.5 sqmm from ceiling rose to connector of fan, surface of the wall shall be made good by cement work/plastering and matching by existing colour ,all the metal part shall be painted two coats of synthetic enamel paint over a coat of primer, writting the MES no. with white colour paint complete all as specified and directed.
Supply and lay pipe galvanised Mediun class including fittings 25mm dirrected by Engr-in -Charge
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed
Supply and fix Gun metal gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
M&L for cutting existing GI pipe alteration or addition of 40/50mm dia bore for insertion of reducer tee complete all as specified and as directed.
Supply, laying, jointing & testing trenches or passing through pipe, 1100 volts grade XLPE insulated PVC bedded galvanised steel strip wire armoured LT electric power UG cabele hevy duty with standered alu conductor of cross section area 16sqmm 2 core withh and including all fixing and connecting accessories such as alu cable lugs cable gland nut bolt waser ect complete as directed
M&L for GI tubing 50 mm bore ,light grade ISI marked forprotection of cable including necessary joints complete all as specified and directed.
M&L for horizental boaring across the road without distrubting the road surface for inserting GI pipe complete all as specified and directed Note- Removal of surplus soil shall be deemed to be include in the unit rate (ii) GI pipe will be measured and paid seperately under relevant items
Supply and Fixing in repair MCB DB double door, powder coated sheet metal enclosure, 2 way 240 volts grade Triple pole and neutral with 200 amps rated bus bar,IP 20 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
S&F and testing PVC Insulated screened XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 10 sqmm 2core , providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:- Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately,
Supply and install portable high presure vehicle washer having 20,000 rpm motor pressure 7 bar 5.5 l/min flow rate power consumption 1450 watt 240 v , 50 HZ complete with provision of anti friction and high pressure hose pipe which can whith satnd 40Mpa having nozzle arrangement to adjust washer shape to meeet the various needs of washing complete all as specified and directed by Engr-in-Charge ( Make-HIRA Model-P-PW-45A or equivalant)
Material and labour for staging and shed for presssure washer and motor assembly including brick work (1.5x0.6x0.5) with sub class B using cement mortor fabrication/welding and fixing angle iron (30x30x3mm 8.4Kg) structure of galavanised sheet ( 0.25mm thick) using proper screw and washer for fixing shed , rendering 10mm thick cement mortor ( 1:6) on fair faces of brick complete all as specified and directed
flexpro construction company
M/s. RAMPHAL GARG
M/S ALOKE CHAKRABORTY and CO
ANUP ENGINEERING WORKS
M/S SHIVNATH SINGH
M/s. MD IRSHAD
M/S RELIABLE CONSTRUCTION CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .