REPAIR AND CLEANING OF SEWAGE LINE, SEPTIC TANKS AT MAP PH-I AND PH-II, AIRMEN AND DCS BILLETS/ MESS AT AF STN PHALODI

Amount

M&L for cleaning and desilting of sewage lines 100mm dia of any size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MOD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with freah water etc complete all as specified and directed.

All as per item No 1.00(here-in-before) but sewage lines 150mm dia.

All as per item No 1.00(here-in-before) but sewage lines 200mm dia.

M&L for cleaning and desilting of manholes depth not exceeding 1.50 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge & other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning and desilting of manholes depth exceeding 1.50 metre but not exceeding 3.00 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning and removal of oil and waste from Grease Trap pit chamber by pumping out/removing liquid waste and sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (oil and waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the Grease Traps with freah water etc complete all as specified and directed. Note- (i) Number of cleaning - Once in week. (ii) Grease Trap pit chamber- 02 Nos

M&L for cleaning the chocked/blocked in AC/CI/PVC soil waste pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus four floors complete all as specified and directed.

M&L for cleaning the chocked/blocked in EWC/IWC/urinal/bathroom and kitchen sink including gully trap, nahani trap and removing of sludge/spoil/waste to a distance exe 100m and testing of same after cleaning complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m depth or n. exc 10 Sqm on plan and n exc 1.5 m in depth for foundations, laying pipes/ cables etc or for shafts,wells,cesspits, manholes,pier holes etc in soft/loose soil, & getting out, complete all as specified and directed

All as per item No 9.00(here-in-before) above but depth exceeding 1.5m and not exceeding 3.0m complete all as specified and directed.

Removal of excavated surplus soil to a distance n.exc 50mtr depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Demolition of brick or stone/ boulder masonary, built in cement mortar complete all as specified & directed.

M&L for providing precast cement concrete Type C-1(1:3:6) (using 20mm graded stone aggregate) solid building blocks exc 10 cm in width (with plain or inter locking joints as directed) setting in CM (1:6) complete in wall or pillars complete all as specified and directed.

M&L Plain Cement Concrete Type D2 (1:4:8) (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L Plain Cement Concrete Type C2 (1:3:6) (using 40 mm graded aggregate) in surface channels and drain (Manhole) complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:4) over 10 mm thick rendering in CM (1:6) Surface other than fair faces of brick work with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall measured and paid sepretally

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 10 mm thick rendering in cement sand mortar (1:3) with water proofing compound @ 3% weight of cement on fair faces of brick work/ block massonary or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be paid for separetly .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as reqd to facilitate demolation) complete all as specified and directed.

M&L for jodhpur stone as in main hole covers of 50mm thick as long as per site requirement and flush jointed in cement mortar (1:6) complete all as specified and directed.

M&L for Pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates as in cover slab for manholes/soakage well and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement steel will be measured & paid separately.

M&L for RCC (Reinforced cement concrete ) Nominal mix Type B1 (1:2:4) (20 mm graded aggregate) as in slab supported on walls , beams and columns in floors, roofs , landings, balconies, canopies, deck slabs and in shelves and the like etc all as specified and directed.

Form work for rough finished flat surfaces of concrete to soffits of suspended slabs sucg as roof slabs , floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or slopping) complete all as specified and directed.

M & L for cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block,roof kerbs or mud stops, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed.

S & F for TMT bars 8mm dia and over cut to length, bent to shape required including bending, cranking spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar100mm complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar150mm complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 200mm complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required (100 mm) bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required (150 mm) bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required (225 mm) bore complete all as specified and directed.

M&L for 100 mm bore reinforced concrete pipe, class NP2 laid & jointed complete with collars Coomplete all as specified & directed.

M&L for 150 mm bore reinforced concrete pipe, class NP2 laid & jointed complete with collars Coomplete all as specified & directed.

M&L for 150mm bore HDPE DWC pipe confirming to IS-16098(Part2): 2013 fusing twin layers with inner surfaces smooth and outer surface corrugated, stiffness class SN4 (length 6mtr) alongwith necessary fittings such as tees, bends, socket and leak proof jointing materials etc and laid & jointed complete with collars complete all as specified and directed.

M&L for Sand filling under DWC pipe floors or in foundations including watering and consolidation complete all as specified & directed.

M&L for 200 mm bore reinforced concrete pipe, class NP2 laid & jointed complete with collars Coomplete all as specified & directed.

M&L for Plain cement concrete (1:4:8) type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100mm bore complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore complete all as specified and directed.

Removal of sludge from septic tanks in a form of solid, semisolid or liquid by means of pumping out or manually and taking out from site and disposed in low laying area to a distance exc 250 m and n.exc 1.00 Km. Disposal of sludge shall be covered with soft/loose soil. After removal of sludge from septic Tank, intereseptic chamber shall be washed with water completely inside and remove the dirty water outside to the satisfaction of Engineer-in-Charge for the following capacity:- Septic Tank of 150 Users complete all as specified and directed.

All as per item No 41.00(here-in-before) but Septic Tank of 100 Users complete all as specified and directed.

All as per item No 41.00(here-in-before) but Septic Tank of 50 Users complete all as specified and directed.

All as per item No 41.00(here-in-before) but Septic Tank of 25 Users complete all as specified and directed.

Dismantling 100mm bore cast iron drain pipes jointed in cement mortar and taking out from trenches/ or from walls complete all as specified & directed.

Dismantling 75mm bore cast iron drain pipes jointed in cement mortar and taking out from trenches/ or from walls complete all as specified & directed.

S&F 100mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears laid in trenches, in floors or fixed to walls with cement joints and provision of required number flat iron clamps of required size complete all as specified and directed .

S&F 75mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears laid in trenches, in floors or fixed to walls with cement joints and provision of required number flat iron clamps of required size complete all as specified and directed .

S&F cast iron bends (any radius) 75mm bore, with duck's foot or heel rest complete all as specified and directed.

S&F cast iron bends (any radius) 100mm bore, with duck's foot or heel rest complete all as specified and directed.

S&F cast iron bends (any radius) 75mm bore, with duck's foot or heel rest fitted with oval access doors complete all as specified and directed.

S&F cast iron bends (any radius) 100mm bore, with duck's foot or heel rest fitted with oval access doors complete all as specified and directed.

S&F in repair 100mm bore cast iron branch pieces double (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch with oval access door complete all as specified and directed.

S&F in repair 75mm bore cast iron cowls complete all as specified and directed.

S&F in repair 100mm bore cast iron cowls complete all as specified and directed.

S&F water closet vitreous china squatting pan "Orissa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern and flush pipe) complete all as specified including CI 'P' trap complete all as specified and directed.

S&F in repairs vitreous china bowl urinal flat back size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flushing pipe and waste pipe) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device complete all as specified and directed.

Demolition of cement concrete exc 15cm thickness in sunken portion but above ground floors complete all as specified and directed.

M&L for water proofing treatment to RCC sunken slab as specified below asd as directed by engr-in-charge:- (a) 15mm plaster in CM (1:3) with WPC on raised vertical surface. (B) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete (1:4:8) over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout (k) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer Make :- Dr. Fixit/Fosroc/BASF/STP NOTE : (i) The Treatment shall be carried out as per the manufacturers industreis and as directed by eng-in-charge. (ii) The plan area of floor shall be consider for payment. (iii) WPC shall be measured and paid saperately.

Supply only integral Water proofing compound complete all as specified and directed.

M&L for cement concrete type E2 (1:5:10) (40mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) of any description complete all as specified and directed.

M&L bands, straps,supports or stays for rainwater ventilating pipes including bolts conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Cutting holes in brick walls for inserting hold fast etc built in C:M n exc half brick wall and making good in cement concrete (1:2:4) type B-1 complete all as specified and directed.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars, barred iron doors, ladders, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for Squared rubble walling, Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiling to store and rubbish off the premisses complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick rendering in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, over 15 mm thick screed bed,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling of interlocking tiles of any description, any thickness complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade,with grey cement and no pigment over 25mm sand thickness complete all as specified and directed. Note- Supply of sand paid separetely.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade,with grey cement and no pigment over 25mm sand thickness complete all as specified and directed. Note- Supply of sand paid separetely

All as per item No 75.00 (here-in-before) but except tiles complete all as specified and directed.

M&L for sand filling in floors or in foundations including waterng and consolidation complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over 15mm screed bed (1:4) including dismantling old tiles complete all as specified and directed.

M/S SOLANKI GENERAL SUPPLIERS (BID ID -3378446)