Supply of Precision Instrument

Amount

SUPPLY, AND INSTALLATION OF PRECISION INSTRUMENTS FOR THE UPGRADATION OF PRIORITY GITIS ACROSS UTTARAKHAND

Angle Gauge for tool grinding

Bevel gauge 200 mm

Bore dial gauge stems 12 to 35 mm, 35 to 65 mm.,dial gauge indicator of 0.01 accuracy.

Bore gauge dial indicator (1 mm range, 0-0.01 mm graduation)-Range of bore gauge 18-150 mm)

Centre Gauge com. 55° and 47½°

Centre Gauge com.60°, 55° and 29°

Combination set 300 mm (Complete Set)

Cylinder bore gauge capacity 20 to 160 mm

Dial test indicator Lever Type-Range 0-0.8 mm , Graduation 0.001 mm, Reading 0-50 with revolution counter

Dial test indicator Plunger Type-Range 0-10 mm , Graduation 0.01 mm, Reading 0-100 with revolution counter

Dial test indicator Plunger Type-Range 0-20 mm , Graduation 0.01 mm, Reading 0-100 with revolution counter

Dial Vernier Caliper 200 mm

Dial Vernier Caliper 300 mm

Digimatic electronic outside Micrometer (0 to 25 mm) LC 0.001 mm

Digimatic Electronic Vernier Caliper 200 mm

Digital micrometer 0-25 mm

Digital Outside micrometer 0 to 25 mm

Digital Vernier caliper 0 - 150 mm L.C. 0.02 mm

Digital Vernier caliper 0 - 200 mm L.C. 0.01 mm

Digital Vernier caliper 0 - 300 mm L.C. 0.01 mm

Direct reading vernier caliper 0- 300

Drill gauges Letter drill gauge (A to Z), Number drill gauge (1 to 60), Metric drill gauge (1.5mm to12.5mm, 30 holes)

Drill point angle gauge

Drill point angle gauge 45°, 60° and 90°

Engineer’s square 150 mm Blade

Engineers rule 300mm

Engineers Square 700 mm

Feeler gauge 0.05 mm to 0.3 mm by 0.05 and 0.4 mm to 1 mm by 0.1 mm

Gauge - Radius Set 1 mm to 25 mm by 0.5 mm

Gauge plug Single ended 5 to 55 by 5mm. Set of 11 pcs.

Gauge snap Go and Not Go

Inside micrometer Range 50-63 mm

Inside micrometer up to 0 to 25 mm

Limit plug gauges 5 mm to 25 m by 2.5mm (GO & NO GO)

Limit plug gauges Ø20mm

Morse Taper Plug & Ring Gauge No. 0 to 7 MT

Optical Bevel protractor

Outside micrometer 0 to 25 mm

Outside Vernier Micrometer 0- 25 mm LC 0.001mm

Plain Ring and Plug Gauge (12,16,20,25,30,32,36,40,45,50mm)

Plug gauge Morse taper No.1, 2, 3, 4,

Protractor with blade 150 mm

Ring gauge Morse taper No.1, 2, 3, 4,

Ring gauges 5 mm to 25 m by 2.5mm (GO & NO GO)

Screw Pitch Gauge Metric 0.25 to 6mm

Screw Pitch Gauge Whitworth & Metric each(0.25 to 6mm)

Screw Thread micrometer (0-25 mm)

Scribing block universal 220 mm

Scribing block universal 300 mm

Sheet Metal Gauge

Sine Bar 125 mm

Sine Bar 200 mm

Slip Gauge Box (workshop grade) - 87 pieces per set

Spirit level 0.05 mm / 200 mm

Spirit level 150 mm, accuracy 0.02 mm / 1000 mm

Spirit level 2 V 250, 05 meter

Spirit level For floor level check

Spirit level metal Type - 2 300 mm Basic LengthAccuracy 0.1mm/Meter

Spirit level precision metallic 200mm

Steel Rule Graduated both in Metric and English Unit 300 mm

Steel Rule Graduated both in Metric and English Unit 300 mm with precision of 1/4th mm

Steel Rule with metric & British graduation 150mm

Steel Square 450mm x 600 mm x 50 mm thick

Straight edge gauge 2 ft

Straight edge steel 1000 mm

Surface gauge with Dial test indicator Plunger Type-Range 0-10 mm , Graduation 0.01 mm, Reading 0-100 with revolution counter

Surface roughness comparison plates N1 - N12 Grade

Taper gauge M.T. No. 1, 2, 3, 4 & 5

Telescopic Gauge 13 mm to 300 mm

Telescopic Gauge 8 mm to 150 mm

Thread Plug Gauge M-20 & M-21

Thread Ring Gauge M-20 & M-21

Try Square 150 mm blade

Try square 300 mm

Universal Dial test indicator Plunger Type-Range 0-10 mm , Graduation 0.01 mm, Reading 0-100 with revolution counter

Vernier Bevel protractor with 150 mm blade

Vernier Bevel protractor with 300 mm Blade with Acute Angle Attachment

Vernier Bevel protractor with300 mm blade with NABLAccredited lab. Certificate

Vernier caliper 0-250 mm

Vernier caliper 0-300 mm

Vernier caliper 150 mm

Vernier Caliper 200 mm

Vernier Caliper Outside, Inside and Depth 200 mm

Vernier gear tooth caliper

Wing Compass 300 mm

Wire Gauge, metric standard.

Depth micrometer 0-25mm (extension rod-200 mm)

Depth micrometer 0-25mm (extension rod-150 mm)

Dial test indicator Lever type-Range 0-10 mm , Graduation 0.01 mm, Reading 0-100 with revolution counter

Inside micrometer up to 0 to 25 mm (tubular)

Scribing block universal 150 mm

Steel Rule Graduated both in Metric and English Unit 300 mm (precision of 1/4th mm)

Steel Rule Graduated both in Metric and English Unit 600 mm

Vernier Height Gauge 0 - 250 mm with least count 0.02 mm

Vernier Height Gauge 0 - 300 mm with least count 0.02 mm

Vernier Height Gauge 0 - 500 mm with least count 0.02 mm