Construction of new boundary wall of navnirmit Fareedpur Samiti Office in Fareedpur Bareilly

Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space belween the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches

Providing and laying in cement concrete 1.4.8 (1) cement coarse sand 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.

R.C.C. work with cement approved coarse sand and 20 mm guage approved stone grit im the proportion of 1:1.5:3(1 cement 1.5 coarse sand 3 stone aggregates) in lighter beams i.e. having spans upto 16 m. excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works, strength of the concrete shall not beless than (M-20)

Reinforced cement concrete work in beams suspended floors, roofs having slope up to 15" landings, balconies, shelves, chaijjas, lintels, bands plain window silis, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement 1.5 coarse send(zone-ill) derived from natural sources graded stone aggregate 20 mm nominal size derived from natural sources). Lintel Band

As in item 3 above but in R.C.C. columns in 1:15:3 having strength not less than [1 cement 1.5 coarse sand 3 stone aggregate) M-20

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth. level up to floor five level, excluding cost of centering.. shuttering, finishing and reinforcement 1.1.5:3 (1) cement 1.5 coarse sand(zone-lll) derived from natural sources 3 graded stone aggregate 20 mm nominal size derived from natural sources)

As in item 3 above but in R.C.C. Work in footing/foundation and footing with approved stone ballast (Using 1:1.5:3 Mix concrete) (1 cement:1.5 coarse sand 3 stone aggregate] M-20

TMT Fe-500 or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

M-150 brick work in 1.6 (one cement and four coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement morter 1:6 (1 cement 6 coarse sand)

12 mm cement plaster in single cost on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement: 6 coarse sand (2.25 F.M.)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 Itr/ 10 sqm over and including priming coat of exterior primer applied 2.20 kg/ 10 sqm)

Providing and applying white cement based putty of average of thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Excevelion in foundations in ordinary sol (Leem clay sand) Including lit upto 15 m (5 fis) and lead upto 30 mt. (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and ading and the sides of foundation trenches of into the pinth and removal and disposal of surplus earth as directed by the Engineer-Incharges upto a dalance of 30ml (100 ft) from the foundation trenches

Providing and laving cement concrete 1:48 (1 cement cparse send grades: Stone aggregate 40 mm nominal size) including suppily of all materials, labour & Po required for proper completion of the work and curing complete atso including cost of formwork in foundation floons

RCC woth with cement approved coarse sand and 20 mm guage approved store ballest in the proportion of 1153 in raft foundation and footing excluding supply of reinforcement and its fixing and binding the same with 24 BWGG) binding wire and including necessary centering and shuttering etc and also including supply of ail materials labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item (M-20)

RCC work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1153 columns excluding supply of reinforcement anc Rs foring and binding the sarne with 24 BWGGI binding wine and including necessary centering and shuttering etc and also including supply of all matenals, labour and tools and plants etc, required for proper completion of the words. Binding wire cost being inluded in the item. (M-20)

Reinforced cemen concrete work walis (any thickness), including attached pilasters, buttresses, panth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand(zone-ill) derived from natural sources 3 graded stone aggregate 20 mm nominal size derved from natural sources)

TMT Fe-500 or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr 10 sqm over and including priming cost of exterior primer applied 2.20 kg/ 10 sqm)

Providing and applying white cement based putty of average of thickness 1 mm. of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhata nosing

Painting or varmishing work in small areas or new wood work with one cost upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 (M.S. works)

Centering and shuttering including strutting, propping etc and removal of form for.Foundations, footings, bases of columns, etc for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillans, Piers, Abutments, Posts and Struts